Commit 7689e82e authored by Cornelia Huck's avatar Cornelia Huck Committed by James Bottomley

[SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA

With

 dma-mapping-prevent-dma-dependent-code-from-linking-on.patch

scsi fails to build on !HAS_DMA architectures:

drivers/built-in.o(.text+0x20af6): In function `scsi_dma_map':
: undefined reference to `dma_map_sg'
drivers/built-in.o(.text+0x20b5c): In function `scsi_dma_unmap':
: undefined reference to `dma_unmap_sg'

I split those functions out into a new file. Builds on s390 and i386.

Move scsi_dma_{map,unmap} into scsi_lib_dma.c which is only build if
HAS_DMA is set.
Signed-off-by: default avatarCornelia Huck <cornelia.huck@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent 6d877688
...@@ -10,6 +10,7 @@ config RAID_ATTRS ...@@ -10,6 +10,7 @@ config RAID_ATTRS
config SCSI config SCSI
tristate "SCSI device support" tristate "SCSI device support"
depends on BLOCK depends on BLOCK
select SCSI_DMA if HAS_DMA
---help--- ---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know any other SCSI device under Linux, say Y and make sure that you know
...@@ -29,6 +30,10 @@ config SCSI ...@@ -29,6 +30,10 @@ config SCSI
However, do not compile this as a module if your root file system However, do not compile this as a module if your root file system
(the one containing the directory /) is located on a SCSI device. (the one containing the directory /) is located on a SCSI device.
config SCSI_DMA
bool
default n
config SCSI_TGT config SCSI_TGT
tristate "SCSI target support" tristate "SCSI target support"
depends on SCSI && EXPERIMENTAL depends on SCSI && EXPERIMENTAL
......
...@@ -148,9 +148,9 @@ obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o ...@@ -148,9 +148,9 @@ obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o
obj-$(CONFIG_SCSI_WAIT_SCAN) += scsi_wait_scan.o obj-$(CONFIG_SCSI_WAIT_SCAN) += scsi_wait_scan.o
scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o \ scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o \
scsicam.o scsi_error.o scsi_lib.o \ scsicam.o scsi_error.o scsi_lib.o
scsi_scan.o scsi_sysfs.o \ scsi_mod-$(CONFIG_SCSI_DMA) += scsi_lib_dma.o
scsi_devinfo.o scsi_mod-y += scsi_scan.o scsi_sysfs.o scsi_devinfo.o
scsi_mod-$(CONFIG_SCSI_NETLINK) += scsi_netlink.o scsi_mod-$(CONFIG_SCSI_NETLINK) += scsi_netlink.o
scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o
scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o
......
...@@ -2290,41 +2290,3 @@ void scsi_kunmap_atomic_sg(void *virt) ...@@ -2290,41 +2290,3 @@ void scsi_kunmap_atomic_sg(void *virt)
kunmap_atomic(virt, KM_BIO_SRC_IRQ); kunmap_atomic(virt, KM_BIO_SRC_IRQ);
} }
EXPORT_SYMBOL(scsi_kunmap_atomic_sg); EXPORT_SYMBOL(scsi_kunmap_atomic_sg);
/**
* scsi_dma_map - perform DMA mapping against command's sg lists
* @cmd: scsi command
*
* Returns the number of sg lists actually used, zero if the sg lists
* is NULL, or -ENOMEM if the mapping failed.
*/
int scsi_dma_map(struct scsi_cmnd *cmd)
{
int nseg = 0;
if (scsi_sg_count(cmd)) {
struct device *dev = cmd->device->host->shost_gendev.parent;
nseg = dma_map_sg(dev, scsi_sglist(cmd), scsi_sg_count(cmd),
cmd->sc_data_direction);
if (unlikely(!nseg))
return -ENOMEM;
}
return nseg;
}
EXPORT_SYMBOL(scsi_dma_map);
/**
* scsi_dma_unmap - unmap command's sg lists mapped by scsi_dma_map
* @cmd: scsi command
*/
void scsi_dma_unmap(struct scsi_cmnd *cmd)
{
if (scsi_sg_count(cmd)) {
struct device *dev = cmd->device->host->shost_gendev.parent;
dma_unmap_sg(dev, scsi_sglist(cmd), scsi_sg_count(cmd),
cmd->sc_data_direction);
}
}
EXPORT_SYMBOL(scsi_dma_unmap);
/*
* SCSI library functions depending on DMA
*/
#include <linux/blkdev.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
/**
* scsi_dma_map - perform DMA mapping against command's sg lists
* @cmd: scsi command
*
* Returns the number of sg lists actually used, zero if the sg lists
* is NULL, or -ENOMEM if the mapping failed.
*/
int scsi_dma_map(struct scsi_cmnd *cmd)
{
int nseg = 0;
if (scsi_sg_count(cmd)) {
struct device *dev = cmd->device->host->shost_gendev.parent;
nseg = dma_map_sg(dev, scsi_sglist(cmd), scsi_sg_count(cmd),
cmd->sc_data_direction);
if (unlikely(!nseg))
return -ENOMEM;
}
return nseg;
}
EXPORT_SYMBOL(scsi_dma_map);
/**
* scsi_dma_unmap - unmap command's sg lists mapped by scsi_dma_map
* @cmd: scsi command
*/
void scsi_dma_unmap(struct scsi_cmnd *cmd)
{
if (scsi_sg_count(cmd)) {
struct device *dev = cmd->device->host->shost_gendev.parent;
dma_unmap_sg(dev, scsi_sglist(cmd), scsi_sg_count(cmd),
cmd->sc_data_direction);
}
}
EXPORT_SYMBOL(scsi_dma_unmap);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment