Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (35 commits)
  powerpc/5121: make clock debug output more readable
  powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function
  powerpc/5200: Update pcm030.dts to add i2c eeprom and delete cruft
  powerpc/5200: convert mpc52xx_psc_spi to use cs_control callback
  fbdev/xilinxfb: Fix improper casting and tighen up probe path
  usb/ps3: Add missing annotations
  powerpc: Add memory clobber to mtspr()
  powerpc: Fix invalid construct in our CPU selection Kconfig
  ps3rom: Use ps3_system_bus_[gs]et_drvdata() instead of direct access
  powerpc: Add configurable -Werror for arch/powerpc
  of_serial: Add UPF_FIXED_TYPE flag
  drivers/hvc: Add missing __devexit_p()
  net/ps3: gelic - Add missing annotations
  powerpc: Introduce macro spin_event_timeout()
  powerpc/warp: Fix ISA_DMA_THRESHOLD default
  powerpc/bootwrapper: Custom build options for XPedite52xx targets
  powerpc/85xx: Add defconfig for X-ES MPC85xx boards
  powerpc/85xx: Add dts files for X-ES MPC85xx boards
  powerpc/85xx: Add platform support for X-ES MPC85xx boards
  83xx: add support for the kmeter1 board.
  ...

arch/powerpc/Kconfig.debug

@@ -2,6 +2,23 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
+config PPC_DISABLE_WERROR
+	bool "Don't build arch/powerpc code with -Werror"
+	default n
+	help
+	  This option tells the compiler NOT to build the code under
+	  arch/powerpc with the -Werror flag (which means warnings
+	  are treated as errors).
+
+	  Only enable this if you are hitting a build failure in the
+	  arch/powerpc code caused by a warning, and you don't feel
+	  inclined to fix it.
+
+config PPC_WERROR
+	bool
+	depends on !PPC_DISABLE_WERROR
+	default y
+
 config PRINT_STACK_DEPTH
 	int "Stack depth to print" if DEBUG_KERNEL
 	default 64

arch/powerpc/boot/cuboot-85xx.c

@@ -15,6 +15,7 @@
 #include "cuboot.h"
 
 #define TARGET_85xx
+#define TARGET_HAS_ETH3
 #include "ppcboot.h"
 
 static bd_t bd;
@@ -27,6 +28,7 @@ static void platform_fixups(void)
 	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
 	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
 	dt_fixup_mac_address_by_alias("ethernet2", bd.bi_enet2addr);
+	dt_fixup_mac_address_by_alias("ethernet3", bd.bi_enet3addr);
 	dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 8, bd.bi_busfreq);
 
 	/* Unfortunately, the specific model number is encoded in the

arch/powerpc/boot/dts/asp834x-redboot.dts

@@ -167,7 +167,7 @@ usb@22000 {
 			interrupt-parent = <&ipic>;
 			interrupts = <39 0x8>;
 			phy_type = "ulpi";
-			port1;
+			port0;
 		};
 		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {

arch/powerpc/boot/dts/gef_sbc610.dts

@@ -152,6 +152,16 @@ i2c1: i2c@3000 {
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
+			hwmon@48 {
+				compatible = "national,lm92";
+				reg = <0x48>;
+			};
+
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
 			rtc@51 {
 				compatible = "epson,rx8581";
 				reg = <0x00000051>;

arch/powerpc/boot/dts/mpc8272ads.dts

@@ -17,6 +17,13 @@ / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		serial0 = &scc1;
+		serial1 = &scc4;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -46,13 +53,13 @@ localbus@f0010100 {
 		#size-cells = <1>;
 		reg = <0xf0010100 0x40>;
 
-		ranges = <0x0 0x0 0xfe000000 0x2000000
+		ranges = <0x0 0x0 0xff800000 0x00800000
 		          0x1 0x0 0xf4500000 0x8000
 		          0x3 0x0 0xf8200000 0x8000>;
 
 		flash@0,0 {
 			compatible = "jedec-flash";
-			reg = <0x0 0x0 0x2000000>;
+			reg = <0x0 0x0 0x00800000>;
 			bank-width = <4>;
 			device-width = <1>;
 		};
@@ -144,7 +151,7 @@ brg@119f0 {
 				reg = <0x119f0 0x10 0x115f0 0x10>;
 			};
 
-			serial@11a00 {
+			scc1: serial@11a00 {
 				device_type = "serial";
 				compatible = "fsl,mpc8272-scc-uart",
 				             "fsl,cpm2-scc-uart";
@@ -155,7 +162,7 @@ serial@11a00 {
 				fsl,cpm-command = <0x800000>;
 			};
 
-			serial@11a60 {
+			scc4: serial@11a60 {
 				device_type = "serial";
 				compatible = "fsl,mpc8272-scc-uart",
 				             "fsl,cpm2-scc-uart";
@@ -192,7 +199,7 @@ PHY1: ethernet-phy@1 {
 				};
 			};
 
-			ethernet@11300 {
+			eth0: ethernet@11300 {
 				device_type = "network";
 				compatible = "fsl,mpc8272-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
@@ -205,7 +212,7 @@ ethernet@11300 {
 				fsl,cpm-command = <0x12000300>;
 			};
 
-			ethernet@11320 {
+			eth1: ethernet@11320 {
 				device_type = "network";
 				compatible = "fsl,mpc8272-fcc-enet",
 				             "fsl,cpm2-fcc-enet";

arch/powerpc/boot/dts/mpc8315erdb.dts

@@ -322,6 +322,21 @@ ipic: interrupt-controller@700 {
 			reg = <0x700 0x100>;
 			device_type = "ipic";
 		};
+
+		ipic-msi@7c0 {
+			compatible = "fsl,ipic-msi";
+			reg = <0x7c0 0x40>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <0x43 0x8
+				      0x4  0x8
+				      0x51 0x8
+				      0x52 0x8
+				      0x56 0x8
+				      0x57 0x8
+				      0x58 0x8
+				      0x59 0x8>;
+			interrupt-parent = < &ipic >;
+		};
 	};
 
 	pci0: pci@e0008500 {

arch/powerpc/boot/dts/mpc8349emitx.dts

@@ -156,7 +156,7 @@ usb@22000 {
 			interrupt-parent = <&ipic>;
 			interrupts = <39 0x8>;
 			phy_type = "ulpi";
-			port1;
+			port0;
 		};
 
 		usb@23000 {

arch/powerpc/boot/dts/mpc834x_mds.dts

@@ -153,7 +153,7 @@ usb@22000 {
 			interrupt-parent = <&ipic>;
 			interrupts = <39 0x8>;
 			phy_type = "ulpi";
-			port1;
+			port0;
 		};
 		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {

arch/powerpc/boot/dts/mpc8377_mds.dts

@@ -155,7 +155,7 @@ rtc@68 {
 			};
 
 			sdhci@2e000 {
-				compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc";
+				compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;

arch/powerpc/boot/dts/mpc8377_rdb.dts

@@ -169,7 +169,7 @@ mcu_pio: mcu@a {
 			};
 
 			sdhci@2e000 {
-				compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc";
+				compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;

arch/powerpc/boot/dts/mpc8378_mds.dts

@@ -155,7 +155,7 @@ rtc@68 {
 			};
 
 			sdhci@2e000 {
-				compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
+				compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;

arch/powerpc/boot/dts/mpc8378_rdb.dts

@@ -169,7 +169,7 @@ mcu_pio: mcu@a {
 			};
 
 			sdhci@2e000 {
-				compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
+				compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;

arch/powerpc/boot/dts/mpc8379_mds.dts

@@ -153,7 +153,7 @@ rtc@68 {
 			};
 
 			sdhci@2e000 {
-				compatible = "fsl,mpc8379-esdhc";
+				compatible = "fsl,mpc8379-esdhc", "fsl,esdhc";
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;

arch/powerpc/boot/dts/mpc8379_rdb.dts

@@ -167,7 +167,7 @@ mcu_pio: mcu@a {
 			};
 
 			sdhci@2e000 {
-				compatible = "fsl,mpc8379-esdhc";
+				compatible = "fsl,mpc8379-esdhc", "fsl,esdhc";
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;

arch/powerpc/boot/dts/mpc8569mds.dts

@@ -24,6 +24,8 @@ aliases {
 		ethernet1 = &enet1;
 		ethernet2 = &enet2;
 		ethernet3 = &enet3;
+		ethernet5 = &enet5;
+		ethernet7 = &enet7;
 		pci1 = &pci1;
 		rapidio0 = &rio0;
 	};
@@ -70,8 +72,30 @@ nor@0,0 {
 			#size-cells = <1>;
 			compatible = "cfi-flash";
 			reg = <0x0 0x0 0x02000000>;
-			bank-width = <2>;
+			bank-width = <1>;
 			device-width = <1>;
+			partition@0 {
+				label = "ramdisk";
+				reg = <0x00000000 0x01c00000>;
+			};
+			partition@1c00000 {
+				label = "kernel";
+				reg = <0x01c00000 0x002e0000>;
+			};
+			partiton@1ee0000 {
+				label = "dtb";
+				reg = <0x01ee0000 0x00020000>;
+			};
+			partition@1f00000 {
+				label = "firmware";
+				reg = <0x01f00000 0x00080000>;
+				read-only;
+			};
+			partition@1f80000 {
+				label = "u-boot";
+				reg = <0x01f80000 0x00080000>;
+				read-only;
+			};
 		};
 
 		bcsr@1,0 {
@@ -466,6 +490,37 @@ qe_phy3: ethernet-phy@03 {
 				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
+			qe_phy5: ethernet-phy@04 {
+				interrupt-parent = <&mpic>;
+				reg = <0x04>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy7: ethernet-phy@06 {
+				interrupt-parent = <&mpic>;
+				reg = <0x6>;
+				device_type = "ethernet-phy";
+			};
+		};
+		mdio@3520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3520 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			tbi0: tbi-phy@15 {
+			reg = <0x15>;
+			device_type = "tbi-phy";
+			};
+		};
+		mdio@3720 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3720 0x38>;
+			compatible = "fsl,ucc-mdio";
+			tbi1: tbi-phy@17 {
+				reg = <0x17>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet2: ucc@2200 {
@@ -513,6 +568,36 @@ enet3: ucc@3200 {
 			phy-connection-type = "rgmii-id";
 		};
 
+		enet5: ucc@3400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <6>;
+			reg = <0x3400 0x200>;
+			interrupts = <41>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "none";
+			tbi-handle = <&tbi0>;
+			phy-handle = <&qe_phy5>;
+			phy-connection-type = "sgmii";
+		};
+
+		enet7: ucc@3600 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <8>;
+			reg = <0x3600 0x200>;
+			interrupts = <43>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "none";
+			tbi-handle = <&tbi1>;
+			phy-handle = <&qe_phy7>;
+			phy-connection-type = "sgmii";
+		};
+
 		muram@10000 {
 			#address-cells = <1>;
 			#size-cells = <1>;

arch/powerpc/boot/dts/pcm030.dts

@@ -258,34 +258,16 @@ rtc@51 {
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;
 			};
-			/* FIXME: EEPROM */
+			eeprom@52 {
+				compatible = "catalyst,24c32";
+				reg = <0x52>;
+			};
 		};
 
 		sram@8000 {
 			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
 			reg = <0x8000 0x4000>;
 		};
-
-		/* This is only an example device to show the usage of gpios. It maps all available
-		 * gpios to the "gpio-provider" device.
-		 */
-		gpio {
-			compatible = "gpio-provider";
-
-						    /* mpc52xx		exp.con		patchfield */
-			gpios = <&gpio_wkup	0 0 /* GPIO_WKUP_7	11d		jp13-3     */
-				 &gpio_wkup	1 0 /* GPIO_WKUP_6	14c			   */
-				 &gpio_wkup	6 0 /* PSC2_4		43c		x5-11	   */
-				 &gpio_simple	2 0 /* IRDA_1		24c		x7-6	set GPS_PORT_CONFIG[IRDA] = 0 */
-				 &gpio_simple	3 0 /* IRDA_0				x8-5	set GPS_PORT_CONFIG[IRDA] = 0 */
-				 &gpt2		0 0 /* timer2		12d		x4-4	   */
-				 &gpt3		0 0 /* timer3		13d		x6-4	   */
-				 &gpt4		0 0 /* timer4		61c		x2-16	   */
-				 &gpt5		0 0 /* timer5		44c		x7-11	   */
-				 &gpt6		0 0 /* timer6		60c		x8-15	   */
-				 &gpt7		0 0 /* timer7		36a		x17-9	   */
-				 >;
-		};
 	};
 
 	pci@f0000d00 {

arch/powerpc/boot/dts/sbc8349.dts

@@ -144,7 +144,7 @@ usb@22000 {
 			interrupt-parent = <&ipic>;
 			interrupts = <39 0x8>;
 			phy_type = "ulpi";
-			port1;
+			port0;
 		};
 		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {

arch/powerpc/boot/wrapper

@@ -225,6 +225,10 @@ asp834x-redboot)
     platformo="$object/fixed-head.o $object/redboot-83xx.o"
     binary=y
     ;;
+xpedite52*)
+    link_address='0x1400000'
+    platformo=$object/cuboot-85xx.o
+    ;;
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"

arch/powerpc/include/asm/delay.h

@@ -2,8 +2,11 @@
 #define _ASM_POWERPC_DELAY_H
 #ifdef __KERNEL__
 
+#include <asm/time.h>
+
 /*
  * Copyright 1996, Paul Mackerras.
+ * Copyright (C) 2009 Freescale Semiconductor, Inc. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -30,5 +33,38 @@ extern void udelay(unsigned long usecs);
 #define mdelay(n)	udelay((n) * 1000)
 #endif
 
+/**
+ * spin_event_timeout - spin until a condition gets true or a timeout elapses
+ * @condition: a C expression to evalate
+ * @timeout: timeout, in microseconds
+ * @delay: the number of microseconds to delay between each evaluation of
+ *         @condition
+ *
+ * The process spins until the condition evaluates to true (non-zero) or the
+ * timeout elapses.  The return value of this macro is the value of
+ * @condition when the loop terminates. This allows you to determine the cause
+ * of the loop terminates.  If the return value is zero, then you know a
+ * timeout has occurred.
+ *
+ * This primary purpose of this macro is to poll on a hardware register
+ * until a status bit changes.  The timeout ensures that the loop still
+ * terminates even if the bit never changes.  The delay is for devices that
+ * need a delay in between successive reads.
+ *
+ * gcc will optimize out the if-statement if @delay is a constant.
+ */
+#define spin_event_timeout(condition, timeout, delay)                          \
+({                                                                             \
+	typeof(condition) __ret;                                               \
+	unsigned long __loops = tb_ticks_per_usec * timeout;                   \
+	unsigned long __start = get_tbl();                                     \
+	while (!(__ret = (condition)) && (tb_ticks_since(__start) <= __loops)) \
+		if (delay)                                                     \
+			udelay(delay);                                         \
+		else                                                           \
+			cpu_relax();                                           \
+	__ret;		                                                       \
+})
+
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_DELAY_H */

arch/powerpc/include/asm/fsl_lbc.h

@@ -95,8 +95,8 @@ struct fsl_lbc_bank {
 };
 
 struct fsl_lbc_regs {
-	struct fsl_lbc_bank bank[8];
-	u8 res0[0x28];
+	struct fsl_lbc_bank bank[12];
+	u8 res0[0x8];
 	__be32 mar;             /**< UPM Address Register */
 	u8 res1[0x4];
 	__be32 mamr;            /**< UPMA Mode Register */

arch/powerpc/include/asm/mpc52xx.h

@@ -16,6 +16,7 @@
 #ifndef __ASSEMBLY__
 #include <asm/types.h>
 #include <asm/prom.h>
+#include <asm/mpc5xxx.h>
 #endif /* __ASSEMBLY__ */
 
 #include <linux/suspend.h>
@@ -268,7 +269,6 @@ struct mpc52xx_intr {
 #ifndef __ASSEMBLY__
 
 /* mpc52xx_common.c */
-extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node);
 extern void mpc5200_setup_xlb_arbiter(void);
 extern void mpc52xx_declare_of_platform_devices(void);
 extern void mpc52xx_map_common_devices(void);

arch/powerpc/include/asm/mpc512x.h → arch/powerpc/include/asm/mpc5xxx.h

@@ -4,7 +4,7 @@
  * Author: John Rigby, <jrigby@freescale.com>, Friday Apr 13 2007
  *
  * Description:
- * MPC5121 Prototypes and definitions
+ * MPC5xxx Prototypes and definitions
  *
  * This is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by
@@ -13,10 +13,10 @@
  *
  */
 
-#ifndef __ASM_POWERPC_MPC512x_H__
-#define __ASM_POWERPC_MPC512x_H__
+#ifndef __ASM_POWERPC_MPC5xxx_H__
+#define __ASM_POWERPC_MPC5xxx_H__
 
-extern unsigned long mpc512x_find_ips_freq(struct device_node *node);
+extern unsigned long mpc5xxx_get_bus_frequency(struct device_node *node);
 
-#endif /* __ASM_POWERPC_MPC512x_H__ */
+#endif /* __ASM_POWERPC_MPC5xxx_H__ */
 

arch/powerpc/include/asm/reg.h

@@ -755,7 +755,8 @@
 #define mfspr(rn)	({unsigned long rval; \
 			asm volatile("mfspr %0," __stringify(rn) \
 				: "=r" (rval)); rval;})
-#define mtspr(rn, v)	asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v))
+#define mtspr(rn, v)	asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v)\
+				     : "memory")
 
 #ifdef __powerpc64__
 #ifdef CONFIG_PPC_CELL

arch/powerpc/include/asm/reg_booke.h

@@ -389,12 +389,14 @@
 #define ICCR_CACHE	1		/* Cacheable */
 
 /* Bit definitions for L1CSR0. */
+#define L1CSR0_CPE	0x00010000	/* Data Cache Parity Enable */
 #define L1CSR0_CLFC	0x00000100	/* Cache Lock Bits Flash Clear */
 #define L1CSR0_DCFI	0x00000002	/* Data Cache Flash Invalidate */
 #define L1CSR0_CFI	0x00000002	/* Cache Flash Invalidate */
 #define L1CSR0_DCE	0x00000001	/* Data Cache Enable */
 
 /* Bit definitions for L1CSR1. */
+#define L1CSR1_CPE	0x00010000	/* Instruction Cache Parity Enable */
 #define L1CSR1_ICLFR	0x00000100	/* Instr Cache Lock Bits Flash Reset */
 #define L1CSR1_ICFI	0x00000002	/* Instr Cache Flash Invalidate */
 #define L1CSR1_ICE	0x00000001	/* Instr Cache Enable */

arch/powerpc/kernel/Makefile

@@ -4,6 +4,8 @@
 
 CFLAGS_ptrace.o		+= -DUTS_MACHINE='"$(UTS_MACHINE)"'
 
+subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
+
 ifeq ($(CONFIG_PPC64),y)
 CFLAGS_prom_init.o	+= -mno-minimal-toc
 endif

arch/powerpc/kernel/cpu_setup_6xx.S

@@ -239,6 +239,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
 	ori	r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE
 	ori	r11,r11,HID0_LRSTK | HID0_BTIC
 	oris	r11,r11,HID0_DPM@h
+BEGIN_MMU_FTR_SECTION
+	oris	r11,r11,HID0_HIGH_BAT@h
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
 BEGIN_FTR_SECTION
 	xori	r11,r11,HID0_BTIC
 END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)

arch/powerpc/kernel/cpu_setup_fsl_booke.S

@@ -17,6 +17,40 @@
 #include <asm/cputable.h>
 #include <asm/ppc_asm.h>
 
+_GLOBAL(__e500_icache_setup)
+	mfspr	r0, SPRN_L1CSR1
+	andi.	r3, r0, L1CSR1_ICE
+	bnelr				/* Already enabled */
+	oris	r0, r0, L1CSR1_CPE@h
+	ori	r0, r0, (L1CSR1_ICFI | L1CSR1_ICLFR |  L1CSR1_ICE)
+	mtspr	SPRN_L1CSR1, r0		/* Enable I-Cache */
+	isync
+	blr
+
+_GLOBAL(__e500_dcache_setup)
+	mfspr	r0, SPRN_L1CSR0
+	andi.	r3, r0, L1CSR0_DCE
+	bnelr				/* Already enabled */
+	msync
+	isync
+	li	r0, 0
+	mtspr	SPRN_L1CSR0, r0		/* Disable */
+	msync
+	isync
+	li	r0, (L1CSR0_DCFI | L1CSR0_CLFC)
+	mtspr	SPRN_L1CSR0, r0		/* Invalidate */
+	isync
+1:	mfspr	r0, SPRN_L1CSR0
+	andi.	r3, r0, L1CSR0_CLFC
+	bne+	1b			/* Wait for lock bits reset */
+	oris	r0, r0, L1CSR0_CPE@h
+	ori	r0, r0, L1CSR0_DCE
+	msync
+	isync
+	mtspr	SPRN_L1CSR0, r0		/* Enable */
+	isync
+	blr
+
 _GLOBAL(__setup_cpu_e200)
 	/* enable dedicated debug exception handling resources (Debug APU) */
 	mfspr	r3,SPRN_HID0
@@ -25,7 +59,16 @@ _GLOBAL(__setup_cpu_e200)
 	b	__setup_e200_ivors
 _GLOBAL(__setup_cpu_e500v1)
 _GLOBAL(__setup_cpu_e500v2)
-	b	__setup_e500_ivors
+	mflr	r4
+	bl	__e500_icache_setup
+	bl	__e500_dcache_setup
+	bl	__setup_e500_ivors
+	mtlr	r4
+	blr
 _GLOBAL(__setup_cpu_e500mc)
-	b	__setup_e500mc_ivors
-
+	mflr	r4
+	bl	__e500_icache_setup
+	bl	__e500_dcache_setup
+	bl	__setup_e500mc_ivors
+	mtlr	r4
+	blr

arch/powerpc/kvm/Makefile

@@ -2,6 +2,8 @@
 # Makefile for Kernel-based Virtual Machine module
 #
 
+subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
+
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/powerpc/kvm
 
 common-objs-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o)

arch/powerpc/lib/Makefile

@@ -2,6 +2,8 @@
 # Makefile for ppc-specific library files..
 #
 
+subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
+
 ifeq ($(CONFIG_PPC64),y)
 EXTRA_CFLAGS		+= -mno-minimal-toc
 endif

arch/powerpc/mm/Makefile

@@ -2,6 +2,8 @@
 # Makefile for the linux ppc-specific parts of the memory manager.
 #
 
+subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
+
 ifeq ($(CONFIG_PPC64),y)
 EXTRA_CFLAGS	+= -mno-minimal-toc
 endif

arch/powerpc/oprofile/Makefile

+subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
+
 ifeq ($(CONFIG_PPC64),y)
 EXTRA_CFLAGS	+= -mno-minimal-toc
 endif

arch/powerpc/platforms/44x/warp.c

@@ -43,7 +43,13 @@ static int __init warp_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	return of_flat_dt_is_compatible(root, "pika,warp");
+	if (!of_flat_dt_is_compatible(root, "pika,warp"))
+		return 0;
+
+	/* For __dma_alloc_coherent */
+	ISA_DMA_THRESHOLD = ~0L;
+
+	return 1;
 }
 
 define_machine(warp) {

arch/powerpc/platforms/512x/clock.c

@@ -24,7 +24,7 @@
 #include <linux/io.h>
 
 #include <linux/of_platform.h>
-#include <asm/mpc512x.h>
+#include <asm/mpc5xxx.h>
 #include <asm/clk_interface.h>
 
 #undef CLK_DEBUG
@@ -83,13 +83,13 @@ static void dump_clocks(void)
 	mutex_lock(&clocks_mutex);
 	printk(KERN_INFO "CLOCKS:\n");
 	list_for_each_entry(p, &clocks, node) {
-		printk(KERN_INFO "  %s %ld", p->name, p->rate);
+		pr_info("  %s=%ld", p->name, p->rate);
 		if (p->parent)
-			printk(KERN_INFO " %s %ld", p->parent->name,
+			pr_cont(" %s=%ld", p->parent->name,
 			       p->parent->rate);
 		if (p->flags & CLK_HAS_CTRL)
-			printk(KERN_INFO " reg/bit %d/%d", p->reg, p->bit);
-		printk("\n");
+			pr_cont(" reg/bit=%d/%d", p->reg, p->bit);
+		pr_cont("\n");
 	}
 	mutex_unlock(&clocks_mutex);
 }

arch/powerpc/platforms/512x/mpc512x.h

@@ -11,7 +11,6 @@
 
 #ifndef __MPC512X_H__
 #define __MPC512X_H__
-extern unsigned long mpc512x_find_ips_freq(struct device_node *node);
 extern void __init mpc512x_init_IRQ(void);
 void __init mpc512x_declare_of_platform_devices(void);
 #endif				/* __MPC512X_H__ */

arch/powerpc/platforms/512x/mpc512x_shared.c

@@ -24,29 +24,6 @@
 
 #include "mpc512x.h"
 
-unsigned long
-mpc512x_find_ips_freq(struct device_node *node)
-{
-	struct device_node *np;
-	const unsigned int *p_ips_freq = NULL;
-
-	of_node_get(node);
-	while (node) {
-		p_ips_freq = of_get_property(node, "bus-frequency", NULL);
-		if (p_ips_freq)
-			break;
-
-		np = of_get_parent(node);
-		of_node_put(node);
-		node = np;
-	}
-	if (node)
-		of_node_put(node);
-
-	return p_ips_freq ? *p_ips_freq : 0;
-}
-EXPORT_SYMBOL(mpc512x_find_ips_freq);
-
 void __init mpc512x_init_IRQ(void)
 {
 	struct device_node *np;

arch/powerpc/platforms/52xx/mpc52xx_common.c

@@ -47,36 +47,6 @@ static DEFINE_SPINLOCK(mpc52xx_lock);
 static struct mpc52xx_gpt __iomem *mpc52xx_wdt;
 static struct mpc52xx_cdm __iomem *mpc52xx_cdm;
 
-/**
- * 	mpc52xx_find_ipb_freq - Find the IPB bus frequency for a device
- * 	@node:	device node
- *
- * 	Returns IPB bus frequency, or 0 if the bus frequency cannot be found.
- */
-unsigned int
-mpc52xx_find_ipb_freq(struct device_node *node)
-{
-	struct device_node *np;
-	const unsigned int *p_ipb_freq = NULL;
-
-	of_node_get(node);
-	while (node) {
-		p_ipb_freq = of_get_property(node, "bus-frequency", NULL);
-		if (p_ipb_freq)
-			break;
-
-		np = of_get_parent(node);
-		of_node_put(node);
-		node = np;
-	}
-	if (node)
-		of_node_put(node);
-
-	return p_ipb_freq ? *p_ipb_freq : 0;
-}
-EXPORT_SYMBOL(mpc52xx_find_ipb_freq);
-
-
 /*
  * Configure the XLB arbiter settings to match what Linux expects.
  */
@@ -221,7 +191,7 @@ unsigned int mpc52xx_get_xtal_freq(struct device_node *node)
 	if (!mpc52xx_cdm)
 		return 0;
 
-	freq = mpc52xx_find_ipb_freq(node);
+	freq = mpc5xxx_get_bus_frequency(node);
 	if (!freq)
 		return 0;
 

arch/powerpc/platforms/83xx/Kconfig

@@ -96,6 +96,13 @@ config ASP834x
 	  This enables support for the Analogue & Micro ASP 83xx
 	  board.
 
+config KMETER1
+	bool "Keymile KMETER1"
+	select DEFAULT_UIMAGE
+	select QUICC_ENGINE
+	help
+	  This enables support for the Keymile KMETER1 board.
+
 
 endif
 

arch/powerpc/platforms/83xx/Makefile

@@ -15,3 +15,4 @@ obj-$(CONFIG_MPC837x_MDS)	+= mpc837x_mds.o
 obj-$(CONFIG_SBC834x)		+= sbc834x.o
 obj-$(CONFIG_MPC837x_RDB)	+= mpc837x_rdb.o
 obj-$(CONFIG_ASP834x)		+= asp834x.o
+obj-$(CONFIG_KMETER1)		+= kmeter1.o

arch/powerpc/platforms/83xx/mpc83xx.h

@@ -22,8 +22,8 @@
 /* system i/o configuration register low */
 #define MPC83XX_SICRL_OFFS         0x114
 #define MPC834X_SICRL_USB_MASK     0x60000000
-#define MPC834X_SICRL_USB0         0x40000000
-#define MPC834X_SICRL_USB1         0x20000000
+#define MPC834X_SICRL_USB0         0x20000000
+#define MPC834X_SICRL_USB1         0x40000000
 #define MPC831X_SICRL_USB_MASK     0x00000c00
 #define MPC831X_SICRL_USB_ULPI     0x00000800
 #define MPC8315_SICRL_USB_MASK     0x000000fc

arch/powerpc/platforms/83xx/usb.c

@@ -47,25 +47,25 @@ int mpc834x_usb_cfg(void)
 		sccr |= MPC83XX_SCCR_USB_DRCM_11;  /* 1:3 */
 
 		prop = of_get_property(np, "phy_type", NULL);
+		port1_is_dr = 1;
 		if (prop && (!strcmp(prop, "utmi") ||
 					!strcmp(prop, "utmi_wide"))) {
 			sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
 			sicrh |= MPC834X_SICRH_USB_UTMI;
-			port1_is_dr = 1;
+			port0_is_dr = 1;
 		} else if (prop && !strcmp(prop, "serial")) {
 			dr_mode = of_get_property(np, "dr_mode", NULL);
 			if (dr_mode && !strcmp(dr_mode, "otg")) {
 				sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
-				port1_is_dr = 1;
+				port0_is_dr = 1;
 			} else {
-				sicrl |= MPC834X_SICRL_USB0;
+				sicrl |= MPC834X_SICRL_USB1;
 			}
 		} else if (prop && !strcmp(prop, "ulpi")) {
-			sicrl |= MPC834X_SICRL_USB0;
+			sicrl |= MPC834X_SICRL_USB1;
 		} else {
 			printk(KERN_WARNING "834x USB PHY type not supported\n");
 		}
-		port0_is_dr = 1;
 		of_node_put(np);
 	}
 	np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph");

arch/powerpc/platforms/85xx/Kconfig

@@ -35,12 +35,14 @@ config MPC85xx_MDS
 	select DEFAULT_UIMAGE
 	select PHYLIB
 	select HAS_RAPIDIO
+	select SWIOTLB
 	help
 	  This option enables support for the MPC85xx MDS board
 
 config MPC8536_DS
 	bool "Freescale MPC8536 DS"
 	select DEFAULT_UIMAGE
+	select SWIOTLB
 	help
 	  This option enables support for the MPC8536 DS board
 
@@ -49,6 +51,7 @@ config MPC85xx_DS
 	select PPC_I8259
 	select DEFAULT_UIMAGE
 	select FSL_ULI1575
+	select SWIOTLB
 	help
 	  This option enables support for the MPC85xx DS (MPC8544 DS) board
 
@@ -64,6 +67,16 @@ config KSI8560
         help
           This option enables support for the Emerson KSI8560 board
 
+config XES_MPC85xx
+	bool "X-ES single-board computer"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the various single-board
+	  computers from Extreme Engineering Solutions (X-ES) based on
+	  Freescale MPC85xx processors.
+	  Manufacturer: Extreme Engineering Solutions, Inc.
+	  URL: <http://www.xes-inc.com/>
+
 config STX_GP3
 	bool "Silicon Turnkey Express GP3"
 	help

arch/powerpc/platforms/85xx/Makefile

@@ -15,3 +15,4 @@ obj-$(CONFIG_SBC8560)     += sbc8560.o
 obj-$(CONFIG_SBC8548)     += sbc8548.o
 obj-$(CONFIG_SOCRATES)    += socrates.o socrates_fpga_pic.o
 obj-$(CONFIG_KSI8560)	  += ksi8560.o
+obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
\ No newline at end of file

arch/powerpc/platforms/86xx/Kconfig

@@ -15,6 +15,7 @@ config MPC8641_HPCN
 	select DEFAULT_UIMAGE
 	select FSL_ULI1575
 	select HAS_RAPIDIO
+	select SWIOTLB
 	help
 	  This option enables support for the MPC8641 HPCN board.