Commit 774ac8b7 authored by Zhang Rui's avatar Zhang Rui Committed by Greg Kroah-Hartman

Thermal: initialize thermal zone device correctly

commit bb431ba2 upstream.

After thermal zone device registered, as we have not read any
temperature before, thus tz->temperature should not be 0,
which actually means 0C, and thermal trend is not available.
In this case, we need specially handling for the first
thermal_zone_device_update().

Both thermal core framework and step_wise governor is
enhanced to handle this. And since the step_wise governor
is the only one that uses trends, so it's the only thermal
governor that needs to be updated.
Tested-by: default avatarManuel Krause <manuelkrause@netscape.net>
Tested-by: default avatarszegad <szegadlo@poczta.onet.pl>
Tested-by: default avatarprash <prash.n.rao@gmail.com>
Tested-by: default avataramish <ammdispose-arch@yahoo.com>
Tested-by: default avatarMatthias <morpheusxyz123@yahoo.de>
Reviewed-by: default avatarJavi Merino <javi.merino@arm.com>
Signed-off-by: default avatarZhang Rui <rui.zhang@intel.com>
Signed-off-by: default avatarChen Yu <yu.c.chen@intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 2f59395e
......@@ -63,6 +63,19 @@ static unsigned long get_target_state(struct thermal_instance *instance,
next_target = instance->target;
dev_dbg(&cdev->device, "cur_state=%ld\n", cur_state);
if (!instance->initialized) {
if (throttle) {
next_target = (cur_state + 1) >= instance->upper ?
instance->upper :
((cur_state + 1) < instance->lower ?
instance->lower : (cur_state + 1));
} else {
next_target = THERMAL_NO_TARGET;
}
return next_target;
}
switch (trend) {
case THERMAL_TREND_RAISING:
if (throttle) {
......@@ -149,7 +162,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
dev_dbg(&instance->cdev->device, "old_target=%d, target=%d\n",
old_target, (int)instance->target);
if (old_target == instance->target)
if (instance->initialized && old_target == instance->target)
continue;
/* Activate a passive thermal instance */
......@@ -161,7 +174,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
instance->target == THERMAL_NO_TARGET)
update_passive_instance(tz, trip_type, -1);
instance->initialized = true;
instance->cdev->updated = false; /* cdev needs update */
}
......
......@@ -532,8 +532,22 @@ static void update_temperature(struct thermal_zone_device *tz)
mutex_unlock(&tz->lock);
trace_thermal_temperature(tz);
dev_dbg(&tz->device, "last_temperature=%d, current_temperature=%d\n",
tz->last_temperature, tz->temperature);
if (tz->last_temperature == THERMAL_TEMP_INVALID)
dev_dbg(&tz->device, "last_temperature N/A, current_temperature=%d\n",
tz->temperature);
else
dev_dbg(&tz->device, "last_temperature=%d, current_temperature=%d\n",
tz->last_temperature, tz->temperature);
}
static void thermal_zone_device_reset(struct thermal_zone_device *tz)
{
struct thermal_instance *pos;
tz->temperature = THERMAL_TEMP_INVALID;
tz->passive = 0;
list_for_each_entry(pos, &tz->thermal_instances, tz_node)
pos->initialized = false;
}
void thermal_zone_device_update(struct thermal_zone_device *tz)
......@@ -1900,6 +1914,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check);
thermal_zone_device_reset(tz);
thermal_zone_device_update(tz);
return tz;
......
......@@ -41,6 +41,7 @@ struct thermal_instance {
struct thermal_zone_device *tz;
struct thermal_cooling_device *cdev;
int trip;
bool initialized;
unsigned long upper; /* Highest cooling state for this trip point */
unsigned long lower; /* Lowest cooling state for this trip point */
unsigned long target; /* expected cooling state */
......
......@@ -43,6 +43,9 @@
/* Default weight of a bound cooling device */
#define THERMAL_WEIGHT_DEFAULT 0
/* use value, which < 0K, to indicate an invalid/uninitialized temperature */
#define THERMAL_TEMP_INVALID -274000
/* Unit conversion macros */
#define DECI_KELVIN_TO_CELSIUS(t) ({ \
long _t = (t); \
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment