rtl2832_sdr: move from staging to media

Move rtl2832_sdr driver module from staging to media.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/dvb-frontends/Kconfig

@@ -446,6 +446,15 @@ config DVB_RTL2832
 	help
 	  Say Y when you want to support this frontend.
 
+config DVB_RTL2832_SDR
+	tristate "Realtek RTL2832 SDR"
+	depends on DVB_CORE && I2C && VIDEO_V4L2
+	select DVB_RTL2832
+	select VIDEOBUF2_VMALLOC
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y when you want to support this SDR module.
+
 config DVB_SI2168
 	tristate "Silicon Labs Si2168"
 	depends on DVB_CORE && I2C && I2C_MUX

drivers/media/dvb-frontends/Makefile

@@ -5,6 +5,11 @@
 ccflags-y += -I$(srctree)/drivers/media/dvb-core/
 ccflags-y += -I$(srctree)/drivers/media/tuners/
 
+# FIXME: RTL2832 SDR driver uses power management directly from USB IF driver
+ifdef CONFIG_DVB_RTL2832_SDR
+	ccflags-y += -I$(srctree)/drivers/media/usb/dvb-usb-v2
+endif
+
 stb0899-objs := stb0899_drv.o stb0899_algo.o
 stv0900-objs := stv0900_core.o stv0900_sw.o
 drxd-objs := drxd_firm.o drxd_hard.o
@@ -104,6 +109,7 @@ obj-$(CONFIG_DVB_A8293) += a8293.o
 obj-$(CONFIG_DVB_TDA10071) += tda10071.o
 obj-$(CONFIG_DVB_RTL2830) += rtl2830.o
 obj-$(CONFIG_DVB_RTL2832) += rtl2832.o
+obj-$(CONFIG_DVB_RTL2832_SDR) += rtl2832_sdr.o
 obj-$(CONFIG_DVB_M88RS2000) += m88rs2000.o
 obj-$(CONFIG_DVB_AF9033) += af9033.o
 

drivers/media/usb/dvb-usb-v2/Kconfig

@@ -129,6 +129,7 @@ config DVB_USB_RTL28XXU
 	depends on DVB_USB_V2 && I2C_MUX
 	select DVB_RTL2830
 	select DVB_RTL2832
+	select DVB_RTL2832_SDR if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT

drivers/staging/media/Kconfig

@@ -40,8 +40,6 @@ source "drivers/staging/media/solo6x10/Kconfig"
 
 source "drivers/staging/media/omap4iss/Kconfig"
 
-source "drivers/staging/media/rtl2832u_sdr/Kconfig"
-
 # Keep LIRC at the end, as it has sub-menus
 source "drivers/staging/media/lirc/Kconfig"
 

drivers/staging/media/Makefile

@@ -11,5 +11,4 @@ obj-$(CONFIG_VIDEO_DM365_VPFE)	+= davinci_vpfe/
 obj-$(CONFIG_VIDEO_OMAP4)	+= omap4iss/
 obj-$(CONFIG_VIDEO_OMAP2)       += omap24xx/
 obj-$(CONFIG_VIDEO_TCM825X)     += omap24xx/
-obj-$(CONFIG_DVB_RTL2832_SDR)	+= rtl2832u_sdr/
 

drivers/staging/media/rtl2832u_sdr/Kconfig

-config DVB_RTL2832_SDR
-	tristate "Realtek RTL2832 SDR"
-	depends on USB && DVB_CORE && I2C && VIDEO_V4L2 && DVB_USB_RTL28XXU
-	select DVB_RTL2832
-	select VIDEOBUF2_VMALLOC
-	default m if !MEDIA_SUBDRV_AUTOSELECT
-

drivers/staging/media/rtl2832u_sdr/Makefile

-obj-$(CONFIG_DVB_RTL2832_SDR) += rtl2832_sdr.o
-
-ccflags-y += -Idrivers/media/dvb-core
-ccflags-y += -Idrivers/media/dvb-frontends
-ccflags-y += -Idrivers/media/tuners
-ccflags-y += -Idrivers/media/usb/dvb-usb-v2