ARM: dts: vf610-colibri: enable display controller

Enable dcu node which is used by the DCU DRM driver. Assign the 5.7"
EDT panel with VGA resolution which Toradex sells often with the
evaluation board.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/vf-colibri-eval-v3.dtsi

@@ -50,6 +50,11 @@ clk16m: clk16m {
 		clock-frequency = <16000000>;
 	};
 
+	panel: panel {
+		compatible = "edt,et057090dhu";
+		backlight = <&bl>;
+	};
+
 	reg_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
@@ -83,6 +88,13 @@ &bl {
 	status  = "okay";
 };
 
+&dcu0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dcu0_1>;
+	fsl,panel = <&panel>;
+	status = "okay";
+};
+
 &dspi1 {
 	status = "okay";
 
@@ -134,6 +146,10 @@ &reg_module_3v3 {
 	vin-supply = <&reg_3v3>;
 };
 
+&tcon0 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };

arch/arm/boot/dts/vf-colibri.dtsi

@@ -219,6 +219,39 @@ VF610_PAD_PTD26__GPIO_68	0x22ed /* EXT_IO_2 */
 			>;
 		};
 
+		pinctrl_dcu0_1: dcu0grp_1 {
+			fsl,pins = <
+				VF610_PAD_PTE0__DCU0_HSYNC	0x1902
+				VF610_PAD_PTE1__DCU0_VSYNC	0x1902
+				VF610_PAD_PTE2__DCU0_PCLK	0x1902
+				VF610_PAD_PTE4__DCU0_DE		0x1902
+				VF610_PAD_PTE5__DCU0_R0		0x1902
+				VF610_PAD_PTE6__DCU0_R1		0x1902
+				VF610_PAD_PTE7__DCU0_R2		0x1902
+				VF610_PAD_PTE8__DCU0_R3		0x1902
+				VF610_PAD_PTE9__DCU0_R4		0x1902
+				VF610_PAD_PTE10__DCU0_R5	0x1902
+				VF610_PAD_PTE11__DCU0_R6	0x1902
+				VF610_PAD_PTE12__DCU0_R7	0x1902
+				VF610_PAD_PTE13__DCU0_G0	0x1902
+				VF610_PAD_PTE14__DCU0_G1	0x1902
+				VF610_PAD_PTE15__DCU0_G2	0x1902
+				VF610_PAD_PTE16__DCU0_G3	0x1902
+				VF610_PAD_PTE17__DCU0_G4	0x1902
+				VF610_PAD_PTE18__DCU0_G5	0x1902
+				VF610_PAD_PTE19__DCU0_G6	0x1902
+				VF610_PAD_PTE20__DCU0_G7	0x1902
+				VF610_PAD_PTE21__DCU0_B0	0x1902
+				VF610_PAD_PTE22__DCU0_B1	0x1902
+				VF610_PAD_PTE23__DCU0_B2	0x1902
+				VF610_PAD_PTE24__DCU0_B3	0x1902
+				VF610_PAD_PTE25__DCU0_B4	0x1902
+				VF610_PAD_PTE26__DCU0_B5	0x1902
+				VF610_PAD_PTE27__DCU0_B6	0x1902
+				VF610_PAD_PTE28__DCU0_B7	0x1902
+			>;
+		};
+
 		pinctrl_dspi1: dspi1grp {
 			fsl,pins = <
 				VF610_PAD_PTD5__DSPI1_CS0		0x33e2