Merge tag 'reset-for-4.10' of git://git.pengutronix.de/git/pza/linux into next/drivers

Reset controller changes for v4.10

- remove obsolete STiH41[56] platform support
- add Oxford Semiconductor OX820 support
- add reset index include files for OX810SE and OX820
- make drivers with boolean Kconfig options explicitly
  non-modular
- allow shared pulsed resets via reset_control_reset, which
  in this case means that the reset must have been triggered
  once, but possibly earlier, after the function returns, and
  is never triggered again for the lifetime of the reset
  control

* tag 'reset-for-4.10' of git://git.pengutronix.de/git/pza/linux:
  reset: allow using reset_control_reset with shared reset
  reset: lpc18xx: make it explicitly non-modular
  reset: zynq: make it explicitly non-modular
  reset: sunxi: make it explicitly non-modular
  reset: socfpga: make it explicitly non-modular
  reset: berlin: make it explicitly non-modular
  dt-bindings: reset: oxnas: Update for OX820
  dt-bindings: reset: oxnas: Add include file with reset indexes
  reset: oxnas: Add OX820 support
  reset: sti: softreset: Remove obsolete platforms from dt binding doc.
  reset: sti: Remove STiH415/6 reset support
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/reset/oxnas,reset.txt

@@ -5,45 +5,19 @@ Please also refer to reset.txt in this directory for common reset
 controller binding usage.
 
 Required properties:
-- compatible: Should be "oxsemi,ox810se-reset"
+- compatible: For OX810SE, should be "oxsemi,ox810se-reset"
+	      For OX820, should be "oxsemi,ox820-reset"
 - #reset-cells: 1, see below
 
 Parent node should have the following properties :
-- compatible: Should be "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"
+- compatible: For OX810SE, should be :
+			"oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"
+	      For OX820, should be :
+			"oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd"
 
-For OX810SE, the indices are :
- - 0 : ARM
- - 1 : COPRO
- - 2 : Reserved
- - 3 : Reserved
- - 4 : USBHS
- - 5 : USBHSPHY
- - 6 : MAC
- - 7 : PCI
- - 8 : DMA
- - 9 : DPE
- - 10 : DDR
- - 11 : SATA
- - 12 : SATA_LINK
- - 13 : SATA_PHY
- - 14 : Reserved
- - 15 : NAND
- - 16 : GPIO
- - 17 : UART1
- - 18 : UART2
- - 19 : MISC
- - 20 : I2S
- - 21 : AHB_MON
- - 22 : UART3
- - 23 : UART4
- - 24 : SGDMA
- - 25 : Reserved
- - 26 : Reserved
- - 27 : Reserved
- - 28 : Reserved
- - 29 : Reserved
- - 30 : Reserved
- - 31 : BUS
+Reset indices are in dt-bindings include files :
+- For OX810SE: include/dt-bindings/reset/oxsemi,ox810se.h
+- For OX820: include/dt-bindings/reset/oxsemi,ox820.h
 
 example:
 

Documentation/devicetree/bindings/reset/st,sti-softreset.txt

@@ -15,15 +15,14 @@ Please refer to reset.txt in this directory for common reset
 controller binding usage.
 
 Required properties:
-- compatible: Should be "st,<chip>-softreset" example:
-	"st,stih415-softreset" or "st,stih416-softreset";
+- compatible: Should be st,stih407-softreset";
 - #reset-cells: 1, see below
 
 example:
 
 	softreset: softreset-controller {
 		#reset-cells = <1>;
-		compatible = "st,stih415-softreset";
+		compatible = "st,stih407-softreset";
 	};
 
 
@@ -42,5 +41,4 @@ example:
 
 Macro definitions for the supported reset channels can be found in:
 
-include/dt-bindings/reset/stih415-resets.h
-include/dt-bindings/reset/stih416-resets.h
+include/dt-bindings/reset/stih407-resets.h

arch/arm/mach-sti/Kconfig

@@ -28,7 +28,6 @@ if ARCH_STI
 config SOC_STIH415
 	bool "STiH415 STMicroelectronics Consumer Electronics family"
 	default y
-	select STIH415_RESET
 	help
 	  This enables support for STMicroelectronics Digital Consumer
 	  Electronics family StiH415 parts, primarily targeted at set-top-box
@@ -38,7 +37,6 @@ config SOC_STIH415
 config SOC_STIH416
 	bool "STiH416 STMicroelectronics Consumer Electronics family"
 	default y
-	select STIH416_RESET
 	help
 	  This enables support for STMicroelectronics Digital Consumer
 	  Electronics family StiH416 parts, primarily targeted at set-top-box

drivers/reset/core.c

@@ -32,6 +32,9 @@ static LIST_HEAD(reset_controller_list);
  * @refcnt: Number of gets of this reset_control
  * @shared: Is this a shared (1), or an exclusive (0) reset_control?
  * @deassert_cnt: Number of times this reset line has been deasserted
+ * @triggered_count: Number of times this reset line has been reset. Currently
+ *                   only used for shared resets, which means that the value
+ *                   will be either 0 or 1.
  */
 struct reset_control {
 	struct reset_controller_dev *rcdev;
@@ -40,6 +43,7 @@ struct reset_control {
 	unsigned int refcnt;
 	int shared;
 	atomic_t deassert_count;
+	atomic_t triggered_count;
 };
 
 /**
@@ -134,18 +138,35 @@ EXPORT_SYMBOL_GPL(devm_reset_controller_register);
  * reset_control_reset - reset the controlled device
  * @rstc: reset controller
  *
- * Calling this on a shared reset controller is an error.
+ * On a shared reset line the actual reset pulse is only triggered once for the
+ * lifetime of the reset_control instance: for all but the first caller this is
+ * a no-op.
+ * Consumers must not use reset_control_(de)assert on shared reset lines when
+ * reset_control_reset has been used.
  */
 int reset_control_reset(struct reset_control *rstc)
 {
-	if (WARN_ON(IS_ERR_OR_NULL(rstc)) ||
-	    WARN_ON(rstc->shared))
+	int ret;
+
+	if (WARN_ON(IS_ERR_OR_NULL(rstc)))
 		return -EINVAL;
 
-	if (rstc->rcdev->ops->reset)
-		return rstc->rcdev->ops->reset(rstc->rcdev, rstc->id);
+	if (!rstc->rcdev->ops->reset)
+		return -ENOTSUPP;
 
-	return -ENOTSUPP;
+	if (rstc->shared) {
+		if (WARN_ON(atomic_read(&rstc->deassert_count) != 0))
+			return -EINVAL;
+
+		if (atomic_inc_return(&rstc->triggered_count) != 1)
+			return 0;
+	}
+
+	ret = rstc->rcdev->ops->reset(rstc->rcdev, rstc->id);
+	if (rstc->shared && !ret)
+		atomic_dec(&rstc->triggered_count);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(reset_control_reset);
 
@@ -159,6 +180,8 @@ EXPORT_SYMBOL_GPL(reset_control_reset);
  *
  * For shared reset controls a driver cannot expect the hw's registers and
  * internal state to be reset, but must be prepared for this to happen.
+ * Consumers must not use reset_control_reset on shared reset lines when
+ * reset_control_(de)assert has been used.
  */
 int reset_control_assert(struct reset_control *rstc)
 {
@@ -169,6 +192,9 @@ int reset_control_assert(struct reset_control *rstc)
 		return -ENOTSUPP;
 
 	if (rstc->shared) {
+		if (WARN_ON(atomic_read(&rstc->triggered_count) != 0))
+			return -EINVAL;
+
 		if (WARN_ON(atomic_read(&rstc->deassert_count) == 0))
 			return -EINVAL;
 
@@ -185,6 +211,8 @@ EXPORT_SYMBOL_GPL(reset_control_assert);
  * @rstc: reset controller
  *
  * After calling this function, the reset is guaranteed to be deasserted.
+ * Consumers must not use reset_control_reset on shared reset lines when
+ * reset_control_(de)assert has been used.
  */
 int reset_control_deassert(struct reset_control *rstc)
 {
@@ -195,6 +223,9 @@ int reset_control_deassert(struct reset_control *rstc)
 		return -ENOTSUPP;
 
 	if (rstc->shared) {
+		if (WARN_ON(atomic_read(&rstc->triggered_count) != 0))
+			return -EINVAL;
+
 		if (atomic_inc_return(&rstc->deassert_count) != 1)
 			return 0;
 	}

drivers/reset/reset-berlin.c

 /*
  * Copyright (C) 2014 Marvell Technology Group Ltd.
  *
+ * Marvell Berlin reset driver
+ *
  * Antoine Tenart <antoine.tenart@free-electrons.com>
  * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
  *
@@ -12,7 +14,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/mfd/syscon.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
@@ -91,7 +93,6 @@ static const struct of_device_id berlin_reset_dt_match[] = {
 	{ .compatible = "marvell,berlin2-reset" },
 	{ },
 };
-MODULE_DEVICE_TABLE(of, berlin_reset_dt_match);
 
 static struct platform_driver berlin_reset_driver = {
 	.probe	= berlin2_reset_probe,
@@ -100,9 +101,4 @@ static struct platform_driver berlin_reset_driver = {
 		.of_match_table = berlin_reset_dt_match,
 	},
 };
-module_platform_driver(berlin_reset_driver);
-
-MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
-MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>");
-MODULE_DESCRIPTION("Marvell Berlin reset driver");
-MODULE_LICENSE("GPL");
+builtin_platform_driver(berlin_reset_driver);

drivers/reset/reset-lpc18xx.c

@@ -13,7 +13,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
@@ -218,39 +218,17 @@ static int lpc18xx_rgu_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int lpc18xx_rgu_remove(struct platform_device *pdev)
-{
-	struct lpc18xx_rgu_data *rc = platform_get_drvdata(pdev);
-	int ret;
-
-	ret = unregister_restart_handler(&rc->restart_nb);
-	if (ret)
-		dev_warn(&pdev->dev, "failed to unregister restart handler\n");
-
-	reset_controller_unregister(&rc->rcdev);
-
-	clk_disable_unprepare(rc->clk_delay);
-	clk_disable_unprepare(rc->clk_reg);
-
-	return 0;
-}
-
 static const struct of_device_id lpc18xx_rgu_match[] = {
 	{ .compatible = "nxp,lpc1850-rgu" },
 	{ }
 };
-MODULE_DEVICE_TABLE(of, lpc18xx_rgu_match);
 
 static struct platform_driver lpc18xx_rgu_driver = {
 	.probe	= lpc18xx_rgu_probe,
-	.remove	= lpc18xx_rgu_remove,
 	.driver	= {
-		.name		= "lpc18xx-reset",
-		.of_match_table	= lpc18xx_rgu_match,
+		.name			= "lpc18xx-reset",
+		.of_match_table		= lpc18xx_rgu_match,
+		.suppress_bind_attrs	= true,
 	},
 };
-module_platform_driver(lpc18xx_rgu_driver);
-
-MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
-MODULE_DESCRIPTION("Reset driver for LPC18xx/43xx RGU");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(lpc18xx_rgu_driver);

drivers/reset/reset-oxnas.c

@@ -80,6 +80,7 @@ static const struct reset_control_ops oxnas_reset_ops = {
 
 static const struct of_device_id oxnas_reset_dt_ids[] = {
 	 { .compatible = "oxsemi,ox810se-reset", },
+	 { .compatible = "oxsemi,ox820-reset", },
 	 { /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, oxnas_reset_dt_ids);

drivers/reset/reset-socfpga.c

 /*
+ * Socfpga Reset Controller Driver
+ *
  * Copyright 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
  *
  * based on
@@ -16,7 +18,7 @@
 
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/reset-controller.h>
@@ -148,8 +150,4 @@ static struct platform_driver socfpga_reset_driver = {
 		.of_match_table	= socfpga_reset_dt_ids,
 	},
 };
-module_platform_driver(socfpga_reset_driver);
-
-MODULE_AUTHOR("Steffen Trumtrar <s.trumtrar@pengutronix.de");
-MODULE_DESCRIPTION("Socfpga Reset Controller Driver");
-MODULE_LICENSE("GPL");
+builtin_platform_driver(socfpga_reset_driver);

drivers/reset/reset-sunxi.c

@@ -13,7 +13,7 @@
 
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
@@ -142,7 +142,6 @@ static const struct of_device_id sunxi_reset_dt_ids[] = {
 	 { .compatible = "allwinner,sun6i-a31-clock-reset", },
 	 { /* sentinel */ },
 };
-MODULE_DEVICE_TABLE(of, sunxi_reset_dt_ids);
 
 static int sunxi_reset_probe(struct platform_device *pdev)
 {
@@ -175,8 +174,4 @@ static struct platform_driver sunxi_reset_driver = {
 		.of_match_table	= sunxi_reset_dt_ids,
 	},
 };
-module_platform_driver(sunxi_reset_driver);
-
-MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com");
-MODULE_DESCRIPTION("Allwinner SoCs Reset Controller Driver");
-MODULE_LICENSE("GPL");
+builtin_platform_driver(sunxi_reset_driver);

drivers/reset/reset-zynq.c

@@ -3,6 +3,8 @@
  *
  * Xilinx Zynq Reset controller driver
  *
+ * Author: Moritz Fischer <moritz.fischer@ettus.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
@@ -15,7 +17,7 @@
 
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/mfd/syscon.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
@@ -137,8 +139,4 @@ static struct platform_driver zynq_reset_driver = {
 		.of_match_table	= zynq_reset_dt_ids,
 	},
 };
-module_platform_driver(zynq_reset_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Moritz Fischer <moritz.fischer@ettus.com>");
-MODULE_DESCRIPTION("Zynq Reset Controller Driver");
+builtin_platform_driver(zynq_reset_driver);

drivers/reset/sti/Kconfig

@@ -3,14 +3,6 @@ if ARCH_STI
 config STI_RESET_SYSCFG
 	bool
 
-config STIH415_RESET
-	bool
-	select STI_RESET_SYSCFG
-
-config STIH416_RESET
-	bool
-	select STI_RESET_SYSCFG
-
 config STIH407_RESET
 	bool
 	select STI_RESET_SYSCFG

drivers/reset/sti/Makefile

 obj-$(CONFIG_STI_RESET_SYSCFG) += reset-syscfg.o
 
-obj-$(CONFIG_STIH415_RESET) += reset-stih415.o
-obj-$(CONFIG_STIH416_RESET) += reset-stih416.o
 obj-$(CONFIG_STIH407_RESET) += reset-stih407.o

drivers/reset/sti/reset-stih415.c

-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited
- * Author: Stephen Gallimore <stephen.gallimore@st.com>
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-
-#include <dt-bindings/reset/stih415-resets.h>
-
-#include "reset-syscfg.h"
-
-/*
- * STiH415 Peripheral powerdown definitions.
- */
-static const char stih415_front[] = "st,stih415-front-syscfg";
-static const char stih415_rear[] = "st,stih415-rear-syscfg";
-static const char stih415_sbc[] = "st,stih415-sbc-syscfg";
-static const char stih415_lpm[] = "st,stih415-lpm-syscfg";
-
-#define STIH415_PDN_FRONT(_bit) \
-	_SYSCFG_RST_CH(stih415_front, SYSCFG_114, _bit, SYSSTAT_187, _bit)
-
-#define STIH415_PDN_REAR(_cntl, _stat) \
-	_SYSCFG_RST_CH(stih415_rear, SYSCFG_336, _cntl, SYSSTAT_384, _stat)
-
-#define STIH415_SRST_REAR(_reg, _bit) \
-	_SYSCFG_RST_CH_NO_ACK(stih415_rear, _reg, _bit)
-
-#define STIH415_SRST_SBC(_reg, _bit) \
-	_SYSCFG_RST_CH_NO_ACK(stih415_sbc, _reg, _bit)
-
-#define STIH415_SRST_FRONT(_reg, _bit) \
-	_SYSCFG_RST_CH_NO_ACK(stih415_front, _reg, _bit)
-
-#define STIH415_SRST_LPM(_reg, _bit) \
-	_SYSCFG_RST_CH_NO_ACK(stih415_lpm, _reg, _bit)
-
-#define SYSCFG_114	0x38 /* Powerdown request EMI/NAND/Keyscan */
-#define SYSSTAT_187	0x15c /* Powerdown status EMI/NAND/Keyscan */
-
-#define SYSCFG_336	0x90 /* Powerdown request USB/SATA/PCIe */
-#define SYSSTAT_384	0x150 /* Powerdown status USB/SATA/PCIe */
-
-#define SYSCFG_376	0x130 /* Reset generator 0 control 0 */
-#define SYSCFG_166	0x108 /* Softreset Ethernet 0 */
-#define SYSCFG_31	0x7c /* Softreset Ethernet 1 */
-#define LPM_SYSCFG_1	0x4 /* Softreset IRB */
-
-static const struct syscfg_reset_channel_data stih415_powerdowns[] = {
-	[STIH415_EMISS_POWERDOWN]	= STIH415_PDN_FRONT(0),
-	[STIH415_NAND_POWERDOWN]	= STIH415_PDN_FRONT(1),
-	[STIH415_KEYSCAN_POWERDOWN]	= STIH415_PDN_FRONT(2),
-	[STIH415_USB0_POWERDOWN]	= STIH415_PDN_REAR(0, 0),
-	[STIH415_USB1_POWERDOWN]	= STIH415_PDN_REAR(1, 1),
-	[STIH415_USB2_POWERDOWN]	= STIH415_PDN_REAR(2, 2),
-	[STIH415_SATA0_POWERDOWN]	= STIH415_PDN_REAR(3, 3),
-	[STIH415_SATA1_POWERDOWN]	= STIH415_PDN_REAR(4, 4),
-	[STIH415_PCIE_POWERDOWN]	= STIH415_PDN_REAR(5, 8),
-};
-
-static const struct syscfg_reset_channel_data stih415_softresets[] = {
-	[STIH415_ETH0_SOFTRESET] = STIH415_SRST_FRONT(SYSCFG_166, 0),
-	[STIH415_ETH1_SOFTRESET] = STIH415_SRST_SBC(SYSCFG_31, 0),
-	[STIH415_IRB_SOFTRESET]	 = STIH415_SRST_LPM(LPM_SYSCFG_1, 6),
-	[STIH415_USB0_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 9),
-	[STIH415_USB1_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 10),
-	[STIH415_USB2_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 11),
-	[STIH415_KEYSCAN_SOFTRESET] = STIH415_SRST_LPM(LPM_SYSCFG_1, 8),
-};
-
-static struct syscfg_reset_controller_data stih415_powerdown_controller = {
-	.wait_for_ack = true,
-	.nr_channels = ARRAY_SIZE(stih415_powerdowns),
-	.channels = stih415_powerdowns,
-};
-
-static struct syscfg_reset_controller_data stih415_softreset_controller = {
-	.wait_for_ack = false,
-	.active_low = true,
-	.nr_channels = ARRAY_SIZE(stih415_softresets),
-	.channels = stih415_softresets,
-};
-
-static const struct of_device_id stih415_reset_match[] = {
-	{ .compatible = "st,stih415-powerdown",
-	  .data = &stih415_powerdown_controller, },
-	{ .compatible = "st,stih415-softreset",
-	  .data = &stih415_softreset_controller, },
-	{},
-};
-
-static struct platform_driver stih415_reset_driver = {
-	.probe = syscfg_reset_probe,
-	.driver = {
-		.name = "reset-stih415",
-		.of_match_table = stih415_reset_match,
-	},
-};
-
-static int __init stih415_reset_init(void)
-{
-	return platform_driver_register(&stih415_reset_driver);
-}
-arch_initcall(stih415_reset_init);

drivers/reset/sti/reset-stih416.c

-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited
- * Author: Stephen Gallimore <stephen.gallimore@st.com>
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-
-#include <dt-bindings/reset/stih416-resets.h>
-
-#include "reset-syscfg.h"
-
-/*
- * STiH416 Peripheral powerdown definitions.
- */
-static const char stih416_front[] = "st,stih416-front-syscfg";
-static const char stih416_rear[] = "st,stih416-rear-syscfg";
-static const char stih416_sbc[] = "st,stih416-sbc-syscfg";
-static const char stih416_lpm[] = "st,stih416-lpm-syscfg";
-static const char stih416_cpu[] = "st,stih416-cpu-syscfg";
-
-#define STIH416_PDN_FRONT(_bit) \
-	_SYSCFG_RST_CH(stih416_front, SYSCFG_1500, _bit, SYSSTAT_1578, _bit)
-
-#define STIH416_PDN_REAR(_cntl, _stat) \
-	_SYSCFG_RST_CH(stih416_rear, SYSCFG_2525, _cntl, SYSSTAT_2583, _stat)
-
-#define SYSCFG_1500	0x7d0 /* Powerdown request EMI/NAND/Keyscan */
-#define SYSSTAT_1578	0x908 /* Powerdown status EMI/NAND/Keyscan */
-
-#define SYSCFG_2525	0x834 /* Powerdown request USB/SATA/PCIe */
-#define SYSSTAT_2583	0x91c /* Powerdown status USB/SATA/PCIe */
-
-#define SYSCFG_2552	0x8A0 /* Reset Generator control 0 */
-#define SYSCFG_1539	0x86c /* Softreset Ethernet 0 */
-#define SYSCFG_510	0x7f8 /* Softreset Ethernet 1 */
-#define LPM_SYSCFG_1	0x4 /* Softreset IRB */
-#define SYSCFG_2553	0x8a4 /* Softreset SATA0/1, PCIE0/1 */
-#define SYSCFG_7563	0x8cc /* MPE softresets 0 */
-#define SYSCFG_7564	0x8d0 /* MPE softresets 1 */
-
-#define STIH416_SRST_CPU(_reg, _bit) \
-	 _SYSCFG_RST_CH_NO_ACK(stih416_cpu, _reg, _bit)
-
-#define STIH416_SRST_FRONT(_reg, _bit) \
-	 _SYSCFG_RST_CH_NO_ACK(stih416_front, _reg, _bit)
-
-#define STIH416_SRST_REAR(_reg, _bit) \
-	 _SYSCFG_RST_CH_NO_ACK(stih416_rear, _reg, _bit)
-
-#define STIH416_SRST_LPM(_reg, _bit) \
-	 _SYSCFG_RST_CH_NO_ACK(stih416_lpm, _reg, _bit)
-
-#define STIH416_SRST_SBC(_reg, _bit) \
-	 _SYSCFG_RST_CH_NO_ACK(stih416_sbc, _reg, _bit)
-
-static const struct syscfg_reset_channel_data stih416_powerdowns[] = {
-	[STIH416_EMISS_POWERDOWN]	= STIH416_PDN_FRONT(0),
-	[STIH416_NAND_POWERDOWN]	= STIH416_PDN_FRONT(1),
-	[STIH416_KEYSCAN_POWERDOWN]	= STIH416_PDN_FRONT(2),
-	[STIH416_USB0_POWERDOWN]	= STIH416_PDN_REAR(0, 0),
-	[STIH416_USB1_POWERDOWN]	= STIH416_PDN_REAR(1, 1),
-	[STIH416_USB2_POWERDOWN]	= STIH416_PDN_REAR(2, 2),
-	[STIH416_USB3_POWERDOWN]	= STIH416_PDN_REAR(6, 5),
-	[STIH416_SATA0_POWERDOWN]	= STIH416_PDN_REAR(3, 3),
-	[STIH416_SATA1_POWERDOWN]	= STIH416_PDN_REAR(4, 4),
-	[STIH416_PCIE0_POWERDOWN]	= STIH416_PDN_REAR(7, 9),
-	[STIH416_PCIE1_POWERDOWN]	= STIH416_PDN_REAR(5, 8),
-};
-
-static const struct syscfg_reset_channel_data stih416_softresets[] = {
-	[STIH416_ETH0_SOFTRESET] = STIH416_SRST_FRONT(SYSCFG_1539, 0),
-	[STIH416_ETH1_SOFTRESET] = STIH416_SRST_SBC(SYSCFG_510, 0),
-	[STIH416_IRB_SOFTRESET]	 = STIH416_SRST_LPM(LPM_SYSCFG_1, 6),
-	[STIH416_USB0_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 9),
-	[STIH416_USB1_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 10),
-	[STIH416_USB2_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 11),
-	[STIH416_USB3_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 28),
-	[STIH416_SATA0_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 7),
-	[STIH416_SATA1_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 3),
-	[STIH416_PCIE0_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 15),
-	[STIH416_PCIE1_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 2),
-	[STIH416_AUD_DAC_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 14),
-	[STIH416_HDTVOUT_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 5),
-	[STIH416_VTAC_M_RX_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 25),
-	[STIH416_VTAC_A_RX_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 26),
-	[STIH416_SYNC_HD_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 5),
-	[STIH416_SYNC_SD_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 6),
-	[STIH416_BLITTER_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 10),
-	[STIH416_GPU_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 11),
-	[STIH416_VTAC_M_TX_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 18),
-	[STIH416_VTAC_A_TX_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 19),
-	[STIH416_VTG_AUX_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 21),
-	[STIH416_JPEG_DEC_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 23),
-	[STIH416_HVA_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 2),
-	[STIH416_COMPO_M_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 3),
-	[STIH416_COMPO_A_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 4),
-	[STIH416_VP8_DEC_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 10),
-	[STIH416_VTG_MAIN_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 16),
-	[STIH416_KEYSCAN_SOFTRESET] = STIH416_SRST_LPM(LPM_SYSCFG_1, 8),
-};
-
-static struct syscfg_reset_controller_data stih416_powerdown_controller = {
-	.wait_for_ack	= true,
-	.nr_channels	= ARRAY_SIZE(stih416_powerdowns),
-	.channels	= stih416_powerdowns,
-};
-
-static struct syscfg_reset_controller_data stih416_softreset_controller = {
-	.wait_for_ack = false,
-	.active_low = true,
-	.nr_channels = ARRAY_SIZE(stih416_softresets),
-	.channels = stih416_softresets,
-};
-
-static const struct of_device_id stih416_reset_match[] = {
-	{ .compatible = "st,stih416-powerdown",
-	  .data = &stih416_powerdown_controller, },
-	{ .compatible = "st,stih416-softreset",
-	  .data = &stih416_softreset_controller, },
-	{},
-};
-
-static struct platform_driver stih416_reset_driver = {
-	.probe = syscfg_reset_probe,
-	.driver = {
-		.name = "reset-stih416",
-		.of_match_table = stih416_reset_match,
-	},
-};
-
-static int __init stih416_reset_init(void)
-{
-	return platform_driver_register(&stih416_reset_driver);
-}
-arch_initcall(stih416_reset_init);

include/dt-bindings/reset/oxsemi,ox810se.h

+/*
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef DT_RESET_OXSEMI_OX810SE_H
+#define DT_RESET_OXSEMI_OX810SE_H
+
+#define RESET_ARM	0
+#define RESET_COPRO	1
+/* Reserved		2 */
+/* Reserved		3 */
+#define RESET_USBHS	4
+#define RESET_USBHSPHY	5
+#define RESET_MAC	6
+#define RESET_PCI	7
+#define RESET_DMA	8
+#define RESET_DPE	9
+#define RESET_DDR	10
+#define RESET_SATA	11
+#define RESET_SATA_LINK	12
+#define RESET_SATA_PHY	13
+ /* Reserved		14 */
+#define RESET_NAND	15
+#define RESET_GPIO	16
+#define RESET_UART1	17
+#define RESET_UART2	18
+#define RESET_MISC	19
+#define RESET_I2S	20
+#define RESET_AHB_MON	21
+#define RESET_UART3	22
+#define RESET_UART4	23
+#define RESET_SGDMA	24
+/* Reserved		25 */
+/* Reserved		26 */
+/* Reserved		27 */
+/* Reserved		28 */
+/* Reserved		29 */
+/* Reserved		30 */
+#define RESET_BUS	31
+
+#endif /* DT_RESET_OXSEMI_OX810SE_H */

include/dt-bindings/reset/oxsemi,ox820.h

+/*
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef DT_RESET_OXSEMI_OX820_H
+#define DT_RESET_OXSEMI_OX820_H
+
+#define RESET_SCU	0
+#define RESET_LEON	1
+#define RESET_ARM0	2
+#define RESET_ARM1	3
+#define RESET_USBHS	4
+#define RESET_USBPHYA	5
+#define RESET_MAC	6
+#define RESET_PCIEA	7
+#define RESET_SGDMA	8
+#define RESET_CIPHER	9
+#define RESET_DDR	10
+#define RESET_SATA	11
+#define RESET_SATA_LINK	12
+#define RESET_SATA_PHY	13
+#define RESET_PCIEPHY	14
+#define RESET_NAND	15
+#define RESET_GPIO	16
+#define RESET_UART1	17
+#define RESET_UART2	18
+#define RESET_MISC	19
+#define RESET_I2S	20
+#define RESET_SD	21
+#define RESET_MAC_2	22
+#define RESET_PCIEB	23
+#define RESET_VIDEO	24
+#define RESET_DDR_PHY	25
+#define RESET_USBPHYB	26
+#define RESET_USBDEV	27
+/* Reserved		29 */
+#define RESET_ARMDBG	29
+#define RESET_PLLA	30
+#define RESET_PLLB	31
+
+#endif /* DT_RESET_OXSEMI_OX820_H */