arm64: dts: hi3660: Add dma to uart nodes

Try to add DMA support to the uart nodes following
the assignments made in the dts from the victoria vendor kernel
here:
https://consumer.huawei.com/en/opensource/detail/?siteCode=worldwide&keywords=p10&fileType=openSourceSoftware&pageSize=10&curPage=1

Cc: Tanglei Han <hantanglei@huawei.com>
Cc: Zhuangluan Su <suzhuangluan@hisilicon.com>
Cc: Ryan Grachek <ryan@edited.us>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

arch/arm64/boot/dts/hisilicon/hi3660.dtsi

@@ -478,6 +478,8 @@ uart1: serial@fdf00000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0xfdf00000 0x0 0x1000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			dma-names = "rx", "tx";
+			dmas =  <&dma0 2 &dma0 3>;
 			clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>,
 				 <&crg_ctrl HI3660_CLK_GATE_UART1>;
 			clock-names = "uartclk", "apb_pclk";
@@ -490,6 +492,8 @@ uart2: serial@fdf03000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0xfdf03000 0x0 0x1000>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			dma-names = "rx", "tx";
+			dmas =  <&dma0 4 &dma0 5>;
 			clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>,
 				 <&crg_ctrl HI3660_PCLK>;
 			clock-names = "uartclk", "apb_pclk";
@@ -514,6 +518,8 @@ uart4: serial@fdf01000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0xfdf01000 0x0 0x1000>;
 			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			dma-names = "rx", "tx";
+			dmas =  <&dma0 6 &dma0 7>;
 			clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>,
 				 <&crg_ctrl HI3660_CLK_GATE_UART4>;
 			clock-names = "uartclk", "apb_pclk";
@@ -526,6 +532,8 @@ uart5: serial@fdf05000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0xfdf05000 0x0 0x1000>;
 			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			dma-names = "rx", "tx";
+			dmas =  <&dma0 8 &dma0 9>;
 			clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>,
 				 <&crg_ctrl HI3660_CLK_GATE_UART5>;
 			clock-names = "uartclk", "apb_pclk";