Commit 79318057 authored by Arjan van de Ven's avatar Arjan van de Ven

fastboot: make the libata port scan asynchronous

This patch makes the libata port scanning asynchronous (per device).
There is a synchronization point before doing the actual disk scan
so that device ordering is not affected.
Signed-off-by: default avatarArjan van de Ven <arjan@linux.intel.com>
parent 4ace92fc
...@@ -56,6 +56,7 @@ ...@@ -56,6 +56,7 @@
#include <linux/workqueue.h> #include <linux/workqueue.h>
#include <linux/scatterlist.h> #include <linux/scatterlist.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/async.h>
#include <scsi/scsi.h> #include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h> #include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h> #include <scsi/scsi_host.h>
...@@ -5909,6 +5910,48 @@ void ata_host_init(struct ata_host *host, struct device *dev, ...@@ -5909,6 +5910,48 @@ void ata_host_init(struct ata_host *host, struct device *dev,
host->ops = ops; host->ops = ops;
} }
static void async_port_probe(void *data, async_cookie_t cookie)
{
int rc;
struct ata_port *ap = data;
/* probe */
if (ap->ops->error_handler) {
struct ata_eh_info *ehi = &ap->link.eh_info;
unsigned long flags;
ata_port_probe(ap);
/* kick EH for boot probing */
spin_lock_irqsave(ap->lock, flags);
ehi->probe_mask |= ATA_ALL_DEVICES;
ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
ap->pflags &= ~ATA_PFLAG_INITIALIZING;
ap->pflags |= ATA_PFLAG_LOADING;
ata_port_schedule_eh(ap);
spin_unlock_irqrestore(ap->lock, flags);
/* wait for EH to finish */
ata_port_wait_eh(ap);
} else {
DPRINTK("ata%u: bus probe begin\n", ap->print_id);
rc = ata_bus_probe(ap);
DPRINTK("ata%u: bus probe end\n", ap->print_id);
if (rc) {
/* FIXME: do something useful here?
* Current libata behavior will
* tear down everything when
* the module is removed
* or the h/w is unplugged.
*/
}
}
}
/** /**
* ata_host_register - register initialized ATA host * ata_host_register - register initialized ATA host
* @host: ATA host to register * @host: ATA host to register
...@@ -5988,45 +6031,9 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) ...@@ -5988,45 +6031,9 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
DPRINTK("probe begin\n"); DPRINTK("probe begin\n");
for (i = 0; i < host->n_ports; i++) { for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i]; struct ata_port *ap = host->ports[i];
async_schedule(async_port_probe, ap);
/* probe */
if (ap->ops->error_handler) {
struct ata_eh_info *ehi = &ap->link.eh_info;
unsigned long flags;
ata_port_probe(ap);
/* kick EH for boot probing */
spin_lock_irqsave(ap->lock, flags);
ehi->probe_mask |= ATA_ALL_DEVICES;
ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
ap->pflags &= ~ATA_PFLAG_INITIALIZING;
ap->pflags |= ATA_PFLAG_LOADING;
ata_port_schedule_eh(ap);
spin_unlock_irqrestore(ap->lock, flags);
/* wait for EH to finish */
ata_port_wait_eh(ap);
} else {
DPRINTK("ata%u: bus probe begin\n", ap->print_id);
rc = ata_bus_probe(ap);
DPRINTK("ata%u: bus probe end\n", ap->print_id);
if (rc) {
/* FIXME: do something useful here?
* Current libata behavior will
* tear down everything when
* the module is removed
* or the h/w is unplugged.
*/
}
}
} }
async_synchronize_full();
/* probes are done, now scan each port's disk(s) */ /* probes are done, now scan each port's disk(s) */
DPRINTK("host probe begin\n"); DPRINTK("host probe begin\n");
for (i = 0; i < host->n_ports; i++) { for (i = 0; i < host->n_ports; i++) {
...@@ -6034,6 +6041,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) ...@@ -6034,6 +6041,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
ata_scsi_scan_host(ap, 1); ata_scsi_scan_host(ap, 1);
} }
DPRINTK("host probe end\n");
return 0; return 0;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment