Merge branch 'spi-5.3' into spi-5.4

Documentation/devicetree/bindings/spi/spi-controller.yaml

@@ -31,7 +31,7 @@ properties:
       If that property is used, the number of chip selects will be
       increased automatically with max(cs-gpios, hardware chip selects).
 
-      So if, for example, the controller has 2 CS lines, and the
+      So if, for example, the controller has 4 CS lines, and the
       cs-gpios looks like this
         cs-gpios = <&gpio1 0 0>, <0>, <&gpio1 1 0>, <&gpio1 2 0>;
 
@@ -73,7 +73,6 @@ patternProperties:
           Compatible of the SPI device.
 
       reg:
-        maxItems: 1
         minimum: 0
         maximum: 256
         description:

drivers/spi/spi-bcm-qspi.c

@@ -343,7 +343,7 @@ static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi,
 {
 	int bpc = 0, bpp = 0;
 	u8 command = op->cmd.opcode;
-	int width  = op->cmd.buswidth ? op->cmd.buswidth : SPI_NBITS_SINGLE;
+	int width = op->data.buswidth ? op->data.buswidth : SPI_NBITS_SINGLE;
 	int addrlen = op->addr.nbytes;
 	int flex_mode = 1;
 
@@ -981,7 +981,7 @@ static int bcm_qspi_exec_mem_op(struct spi_mem *mem,
 	if (mspi_read)
 		return bcm_qspi_mspi_exec_mem_op(spi, op);
 
-	ret = bcm_qspi_bspi_set_mode(qspi, op, -1);
+	ret = bcm_qspi_bspi_set_mode(qspi, op, 0);
 
 	if (!ret)
 		ret = bcm_qspi_bspi_exec_mem_op(spi, op);

drivers/spi/spi-bcm2835.c

@@ -834,7 +834,8 @@ static int bcm2835_spi_transfer_one(struct spi_controller *ctlr,
 	bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv);
 
 	/* handle all the 3-wire mode */
-	if ((spi->mode & SPI_3WIRE) && (tfr->rx_buf))
+	if (spi->mode & SPI_3WIRE && tfr->rx_buf &&
+	    tfr->rx_buf != ctlr->dummy_rx)
 		cs |= BCM2835_SPI_CS_REN;
 	else
 		cs &= ~BCM2835_SPI_CS_REN;

drivers/spi/spi-dw-pci.c

@@ -19,6 +19,7 @@ struct spi_pci_desc {
 	int	(*setup)(struct dw_spi *);
 	u16	num_cs;
 	u16	bus_num;
+	u32	max_freq;
 };
 
 static struct spi_pci_desc spi_pci_mid_desc_1 = {
@@ -33,6 +34,12 @@ static struct spi_pci_desc spi_pci_mid_desc_2 = {
 	.bus_num = 1,
 };
 
+static struct spi_pci_desc spi_pci_ehl_desc = {
+	.num_cs = 1,
+	.bus_num = -1,
+	.max_freq = 100000000,
+};
+
 static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	struct dw_spi *dws;
@@ -65,6 +72,7 @@ static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (desc) {
 		dws->num_cs = desc->num_cs;
 		dws->bus_num = desc->bus_num;
+		dws->max_freq = desc->max_freq;
 
 		if (desc->setup) {
 			ret = desc->setup(dws);
@@ -123,6 +131,11 @@ static const struct pci_device_id pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x0800), (kernel_ulong_t)&spi_pci_mid_desc_1},
 	/* Intel MID platform SPI controller 2 */
 	{ PCI_VDEVICE(INTEL, 0x0812), (kernel_ulong_t)&spi_pci_mid_desc_2},
+	/* Intel Elkhart Lake PSE SPI controllers */
+	{ PCI_VDEVICE(INTEL, 0x4b84), (kernel_ulong_t)&spi_pci_ehl_desc},
+	{ PCI_VDEVICE(INTEL, 0x4b85), (kernel_ulong_t)&spi_pci_ehl_desc},
+	{ PCI_VDEVICE(INTEL, 0x4b86), (kernel_ulong_t)&spi_pci_ehl_desc},
+	{ PCI_VDEVICE(INTEL, 0x4b87), (kernel_ulong_t)&spi_pci_ehl_desc},
 	{},
 };
 

drivers/spi/spi-fsl-qspi.c

@@ -206,7 +206,7 @@ static const struct fsl_qspi_devtype_data imx6sx_data = {
 };
 
 static const struct fsl_qspi_devtype_data imx7d_data = {
-	.rxfifo = SZ_512,
+	.rxfifo = SZ_128,
 	.txfifo = SZ_512,
 	.ahb_buf_size = SZ_1K,
 	.quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK,

drivers/spi/spi-gpio.c

@@ -410,6 +410,12 @@ static int spi_gpio_probe(struct platform_device *pdev)
 
 	bb = &spi_gpio->bitbang;
 	bb->master = master;
+	/*
+	 * There is some additional business, apart from driving the CS GPIO
+	 * line, that we need to do on selection. This makes the local
+	 * callback for chipselect always get called.
+	 */
+	master->flags |= SPI_MASTER_GPIO_SS;
 	bb->chipselect = spi_gpio_chipselect;
 	bb->set_line_direction = spi_gpio_set_direction;
 

drivers/spi/spi-pxa2xx.c

@@ -1457,6 +1457,14 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
 	{ PCI_VDEVICE(INTEL, 0x02aa), LPSS_CNL_SSP },
 	{ PCI_VDEVICE(INTEL, 0x02ab), LPSS_CNL_SSP },
 	{ PCI_VDEVICE(INTEL, 0x02fb), LPSS_CNL_SSP },
+	/* TGL-LP */
+	{ PCI_VDEVICE(INTEL, 0xa0aa), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0xa0ab), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0xa0de), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0xa0df), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0xa0fb), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0xa0fd), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0xa0fe), LPSS_CNL_SSP },
 	{ },
 };
 
@@ -1831,14 +1839,16 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 	status = devm_spi_register_controller(&pdev->dev, controller);
 	if (status != 0) {
 		dev_err(&pdev->dev, "problem registering spi controller\n");
-		goto out_error_clock_enabled;
+		goto out_error_pm_runtime_enabled;
 	}
 
 	return status;
 
-out_error_clock_enabled:
+out_error_pm_runtime_enabled:
 	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
+
+out_error_clock_enabled:
 	clk_disable_unprepare(ssp->clk);
 
 out_error_dma_irq_alloc:

drivers/spi/spi-zynq-qspi.c

@@ -694,7 +694,7 @@ static int zynq_qspi_probe(struct platform_device *pdev)
 	ctlr->setup = zynq_qspi_setup_op;
 	ctlr->max_speed_hz = clk_get_rate(xqspi->refclk) / 2;
 	ctlr->dev.of_node = np;
-	ret = spi_register_controller(ctlr);
+	ret = devm_spi_register_controller(&pdev->dev, ctlr);
 	if (ret) {
 		dev_err(&pdev->dev, "spi_register_master failed\n");
 		goto clk_dis_all;