pinctrl: imx27: fix wrong offset to ICONFB

The offset to ICONFB was incorrect, this patch set the correct value 0x14.
dev_dbg in function imx1_write_2bit print the wrong address and had been
moved after address calculation.

Cc: stable@vger.kernel.org
Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Reviewed-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/pinctrl-imx1-core.c

@@ -45,7 +45,7 @@ struct imx1_pinctrl {
 #define MX1_DDIR 0x00
 #define MX1_OCR 0x04
 #define MX1_ICONFA 0x0c
-#define MX1_ICONFB 0x10
+#define MX1_ICONFB 0x14
 #define MX1_GIUS 0x20
 #define MX1_GPR 0x38
 #define MX1_PUEN 0x40
@@ -97,13 +97,13 @@ static void imx1_write_2bit(struct imx1_pinctrl *ipctl, unsigned int pin_id,
 	u32 old_val;
 	u32 new_val;
 
-	dev_dbg(ipctl->dev, "write: register 0x%p offset %d value 0x%x\n",
-			reg, offset, value);
-
 	/* Use the next register if the pin's port pin number is >=16 */
 	if (pin_id % 32 >= 16)
 		reg += 0x04;
 
+	dev_dbg(ipctl->dev, "write: register 0x%p offset %d value 0x%x\n",
+			reg, offset, value);
+
 	/* Get current state of pins */
 	old_val = readl(reg);
 	old_val &= mask;