pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support

This driver supports pinctrl/GPIO hardware found on Intel Sunrisepoint (a
Skylake PCH) providing users a pinctrl and GPIO interfaces (including GPIO
interrupts).

The driver is split into core and platform parts so that the same core
driver can be reused in other drivers for other Intel GPIO hardware that is
based on the same host controller design.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/intel/Kconfig

@@ -25,3 +25,20 @@ config PINCTRL_CHERRYVIEW
 	help
 	  Cherryview/Braswell pinctrl driver provides an interface that
 	  allows configuring of SoC pins and using them as GPIOs.
+
+config PINCTRL_INTEL
+	tristate
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	select GPIOLIB
+	select GPIOLIB_IRQCHIP
+
+config PINCTRL_SUNRISEPOINT
+	tristate "Intel Sunrisepoint pinctrl and GPIO driver"
+	depends on ACPI
+	select PINCTRL_INTEL
+	help
+	  Sunrisepoint is the PCH of Intel Skylake. This pinctrl driver
+	  provides an interface that allows configuring of PCH pins and
+	  using them as GPIOs.

drivers/pinctrl/intel/Makefile

@@ -2,3 +2,5 @@
 
 obj-$(CONFIG_PINCTRL_BAYTRAIL)		+= pinctrl-baytrail.o
 obj-$(CONFIG_PINCTRL_CHERRYVIEW)	+= pinctrl-cherryview.o
+obj-$(CONFIG_PINCTRL_INTEL)		+= pinctrl-intel.o
+obj-$(CONFIG_PINCTRL_SUNRISEPOINT)	+= pinctrl-sunrisepoint.o

drivers/pinctrl/intel/pinctrl-intel.h

+/*
+ * Core pinctrl/GPIO driver for Intel GPIO controllers
+ *
+ * Copyright (C) 2015, Intel Corporation
+ * Authors: Mathias Nyman <mathias.nyman@linux.intel.com>
+ *          Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef PINCTRL_INTEL_H
+#define PINCTRL_INTEL_H
+
+struct pinctrl_pin_desc;
+struct platform_device;
+struct device;
+
+/**
+ * struct intel_pingroup - Description about group of pins
+ * @name: Name of the groups
+ * @pins: All pins in this group
+ * @npins: Number of pins in this groups
+ * @mode: Native mode in which the group is muxed out @pins
+ */
+struct intel_pingroup {
+	const char *name;
+	const unsigned *pins;
+	size_t npins;
+	unsigned short mode;
+};
+
+/**
+ * struct intel_function - Description about a function
+ * @name: Name of the function
+ * @groups: An array of groups for this function
+ * @ngroups: Number of groups in @groups
+ */
+struct intel_function {
+	const char *name;
+	const char * const *groups;
+	size_t ngroups;
+};
+
+/**
+ * struct intel_community - Intel pin community description
+ * @barno: MMIO BAR number where registers for this community reside
+ * @padown_offset: Register offset of PAD_OWN register from @regs. If %0
+ *                 then there is no support for owner.
+ * @padcfglock_offset: Register offset of PADCFGLOCK from @regs. If %0 then
+ *                     locking is not supported.
+ * @hostown_offset: Register offset of HOSTSW_OWN from @regs. If %0 then it
+ *                  is assumed that the host owns the pin (rather than
+ *                  ACPI).
+ * @ie_offset: Register offset of GPI_IE from @regs.
+ * @pin_base: Starting pin of pins in this community
+ * @npins: Number of pins in this community
+ * @regs: Community specific common registers (reserved for core driver)
+ * @pad_regs: Community specific pad registers (reserved for core driver)
+ * @ngpps: Number of groups (hw groups) in this community (reserved for
+ *         core driver)
+ */
+struct intel_community {
+	unsigned barno;
+	unsigned padown_offset;
+	unsigned padcfglock_offset;
+	unsigned hostown_offset;
+	unsigned ie_offset;
+	unsigned pin_base;
+	size_t npins;
+	void __iomem *regs;
+	void __iomem *pad_regs;
+	size_t ngpps;
+};
+
+#define PIN_GROUP(n, p, m)			\
+	{					\
+		.name = (n),			\
+		.pins = (p),			\
+		.npins = ARRAY_SIZE((p)),	\
+		.mode = (m),			\
+	}
+
+#define FUNCTION(n, g)				\
+	{					\
+		.name = (n),			\
+		.groups = (g),			\
+		.ngroups = ARRAY_SIZE((g)),	\
+	}
+
+/**
+ * struct intel_pinctrl_soc_data - Intel pin controller per-SoC configuration
+ * @uid: ACPI _UID for the probe driver use if needed
+ * @pins: Array if pins this pinctrl controls
+ * @npins: Number of pins in the array
+ * @groups: Array of pin groups
+ * @ngroups: Number of groups in the array
+ * @functions: Array of functions
+ * @nfunctions: Number of functions in the array
+ * @communities: Array of communities this pinctrl handles
+ * @ncommunities: Number of communities in the array
+ *
+ * The @communities is used as a template by the core driver. It will make
+ * copy of all communities and fill in rest of the information.
+ */
+struct intel_pinctrl_soc_data {
+	const char *uid;
+	const struct pinctrl_pin_desc *pins;
+	size_t npins;
+	const struct intel_pingroup *groups;
+	size_t ngroups;
+	const struct intel_function *functions;
+	size_t nfunctions;
+	const struct intel_community *communities;
+	size_t ncommunities;
+};
+
+int intel_pinctrl_probe(struct platform_device *pdev,
+			const struct intel_pinctrl_soc_data *soc_data);
+int intel_pinctrl_remove(struct platform_device *pdev);
+
+#ifdef CONFIG_PM_SLEEP
+int intel_pinctrl_suspend(struct device *dev);
+int intel_pinctrl_resume(struct device *dev);
+#endif
+
+#endif /* PINCTRL_INTEL_H */