Commit 7992893c authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:

 - alternative reset driver for new at91 SoCs

 - misc fixes

* tag 'for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  sbs-battery: fix power status when battery charging near dry
  power: ipaq-micro-battery: freeing the wrong variable
  power/max8925: freeing wrong variable
  power: reset: at91-shdwc: add new shutdown controller driver
  ARM: dts: at91: shdwc binding: add new shutdown controller documentation
parents 6eb59af5 4a99fa06
...@@ -151,6 +151,65 @@ Example: ...@@ -151,6 +151,65 @@ Example:
clocks = <&clk32k>; clocks = <&clk32k>;
}; };
SHDWC SAMA5D2-Compatible Shutdown Controller
1) shdwc node
required properties:
- compatible: should be "atmel,sama5d2-shdwc".
- reg: should contain registers location and length
- clocks: phandle to input clock.
- #address-cells: should be one. The cell is the wake-up input index.
- #size-cells: should be zero.
optional properties:
- debounce-delay-us: minimum wake-up inputs debouncer period in
microseconds. It's usually a board-related property.
- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
The node contains child nodes for each wake-up input that the platform uses.
2) input nodes
Wake-up input nodes are usually described in the "board" part of the Device
Tree. Note also that input 0 is linked to the wake-up pin and is frequently
used.
Required properties:
- reg: should contain the wake-up input index [0 - 15].
Optional properties:
- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
by the child, forces the wake-up of the core power supply on a high level.
The default is to be active low.
Example:
On the SoC side:
shdwc@f8048010 {
compatible = "atmel,sama5d2-shdwc";
reg = <0xf8048010 0x10>;
clocks = <&clk32k>;
#address-cells = <1>;
#size-cells = <0>;
atmel,wakeup-rtc-timer;
};
On the board side:
shdwc@f8048010 {
debounce-delay-us = <976>;
input@0 {
reg = <0>;
};
input@1 {
reg = <1>;
atmel,wakeup-active-high;
};
};
Special Function Registers (SFR) Special Function Registers (SFR)
Special Function Registers (SFR) manage specific aspects of the integrated Special Function Registers (SFR) manage specific aspects of the integrated
......
...@@ -2048,6 +2048,11 @@ M: Nicolas Ferre <nicolas.ferre@atmel.com> ...@@ -2048,6 +2048,11 @@ M: Nicolas Ferre <nicolas.ferre@atmel.com>
S: Supported S: Supported
F: drivers/tty/serial/atmel_serial.c F: drivers/tty/serial/atmel_serial.c
ATMEL AT91 SAMA5D2-Compatible Shutdown Controller
M: Nicolas Ferre <nicolas.ferre@atmel.com>
S: Supported
F: drivers/power/reset/at91-sama5d2_shdwc.c
ATMEL SAMA5D2 ADC DRIVER ATMEL SAMA5D2 ADC DRIVER
M: Ludovic Desroches <ludovic.desroches@atmel.com> M: Ludovic Desroches <ludovic.desroches@atmel.com>
L: linux-iio@vger.kernel.org L: linux-iio@vger.kernel.org
......
...@@ -261,7 +261,7 @@ static int micro_batt_probe(struct platform_device *pdev) ...@@ -261,7 +261,7 @@ static int micro_batt_probe(struct platform_device *pdev)
return 0; return 0;
ac_err: ac_err:
power_supply_unregister(micro_ac_power); power_supply_unregister(micro_batt_power);
batt_err: batt_err:
cancel_delayed_work_sync(&mb->update); cancel_delayed_work_sync(&mb->update);
destroy_workqueue(mb->wq); destroy_workqueue(mb->wq);
......
...@@ -540,14 +540,14 @@ static int max8925_power_probe(struct platform_device *pdev) ...@@ -540,14 +540,14 @@ static int max8925_power_probe(struct platform_device *pdev)
info->usb = power_supply_register(&pdev->dev, &usb_desc, &psy_cfg); info->usb = power_supply_register(&pdev->dev, &usb_desc, &psy_cfg);
if (IS_ERR(info->usb)) { if (IS_ERR(info->usb)) {
ret = PTR_ERR(info->usb); ret = PTR_ERR(info->usb);
goto out_usb; goto out_unregister_ac;
} }
info->usb->dev.parent = &pdev->dev; info->usb->dev.parent = &pdev->dev;
info->battery = power_supply_register(&pdev->dev, &battery_desc, NULL); info->battery = power_supply_register(&pdev->dev, &battery_desc, NULL);
if (IS_ERR(info->battery)) { if (IS_ERR(info->battery)) {
ret = PTR_ERR(info->battery); ret = PTR_ERR(info->battery);
goto out_battery; goto out_unregister_usb;
} }
info->battery->dev.parent = &pdev->dev; info->battery->dev.parent = &pdev->dev;
...@@ -560,9 +560,9 @@ static int max8925_power_probe(struct platform_device *pdev) ...@@ -560,9 +560,9 @@ static int max8925_power_probe(struct platform_device *pdev)
max8925_init_charger(chip, info); max8925_init_charger(chip, info);
return 0; return 0;
out_battery: out_unregister_usb:
power_supply_unregister(info->battery); power_supply_unregister(info->usb);
out_usb: out_unregister_ac:
power_supply_unregister(info->ac); power_supply_unregister(info->ac);
out: out:
return ret; return ret;
......
...@@ -30,6 +30,14 @@ config POWER_RESET_AT91_RESET ...@@ -30,6 +30,14 @@ config POWER_RESET_AT91_RESET
This driver supports restart for Atmel AT91SAM9 and SAMA5 This driver supports restart for Atmel AT91SAM9 and SAMA5
SoCs SoCs
config POWER_RESET_AT91_SAMA5D2_SHDWC
tristate "Atmel AT91 SAMA5D2-Compatible shutdown controller driver"
depends on ARCH_AT91 || COMPILE_TEST
default SOC_SAMA5
help
This driver supports the alternate shutdown controller for some Atmel
SAMA5 SoCs. It is present for example on SAMA5D2 SoC.
config POWER_RESET_AXXIA config POWER_RESET_AXXIA
bool "LSI Axxia reset driver" bool "LSI Axxia reset driver"
depends on ARCH_AXXIA depends on ARCH_AXXIA
......
obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o
obj-$(CONFIG_POWER_RESET_AT91_POWEROFF) += at91-poweroff.o obj-$(CONFIG_POWER_RESET_AT91_POWEROFF) += at91-poweroff.o
obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o
obj-$(CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC) += at91-sama5d2_shdwc.o
obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
......
/*
* Atmel SAMA5D2-Compatible Shutdown Controller (SHDWC) driver.
* Found on some SoCs as the sama5d2 (obviously).
*
* Copyright (C) 2015 Atmel Corporation,
* Nicolas Ferre <nicolas.ferre@atmel.com>
*
* Evolved from driver at91-poweroff.c.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
* TODO:
* - addition to status of other wake-up inputs [1 - 15]
* - Analog Comparator wake-up alarm
* - Serial RX wake-up alarm
* - low power debouncer
*/
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/printk.h>
#define SLOW_CLOCK_FREQ 32768
#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */
#define AT91_SHDW_SHDW BIT(0) /* Shut Down command */
#define AT91_SHDW_KEY (0xa5UL << 24) /* KEY Password */
#define AT91_SHDW_MR 0x04 /* Shut Down Mode Register */
#define AT91_SHDW_WKUPDBC_SHIFT 24
#define AT91_SHDW_WKUPDBC_MASK GENMASK(31, 16)
#define AT91_SHDW_WKUPDBC(x) (((x) << AT91_SHDW_WKUPDBC_SHIFT) \
& AT91_SHDW_WKUPDBC_MASK)
#define AT91_SHDW_SR 0x08 /* Shut Down Status Register */
#define AT91_SHDW_WKUPIS_SHIFT 16
#define AT91_SHDW_WKUPIS_MASK GENMASK(31, 16)
#define AT91_SHDW_WKUPIS(x) ((1 << (x)) << AT91_SHDW_WKUPIS_SHIFT \
& AT91_SHDW_WKUPIS_MASK)
#define AT91_SHDW_WUIR 0x0c /* Shutdown Wake-up Inputs Register */
#define AT91_SHDW_WKUPEN_MASK GENMASK(15, 0)
#define AT91_SHDW_WKUPEN(x) ((1 << (x)) & AT91_SHDW_WKUPEN_MASK)
#define AT91_SHDW_WKUPT_SHIFT 16
#define AT91_SHDW_WKUPT_MASK GENMASK(31, 16)
#define AT91_SHDW_WKUPT(x) ((1 << (x)) << AT91_SHDW_WKUPT_SHIFT \
& AT91_SHDW_WKUPT_MASK)
#define SHDW_WK_PIN(reg, cfg) ((reg) & AT91_SHDW_WKUPIS((cfg)->wkup_pin_input))
#define SHDW_RTCWK(reg, cfg) (((reg) >> ((cfg)->sr_rtcwk_shift)) & 0x1)
#define SHDW_RTCWKEN(cfg) (1 << ((cfg)->mr_rtcwk_shift))
#define DBC_PERIOD_US(x) DIV_ROUND_UP_ULL((1000000 * (x)), \
SLOW_CLOCK_FREQ)
struct shdwc_config {
u8 wkup_pin_input;
u8 mr_rtcwk_shift;
u8 sr_rtcwk_shift;
};
struct shdwc {
struct shdwc_config *cfg;
void __iomem *at91_shdwc_base;
};
/*
* Hold configuration here, cannot be more than one instance of the driver
* since pm_power_off itself is global.
*/
static struct shdwc *at91_shdwc;
static struct clk *sclk;
static const unsigned long long sdwc_dbc_period[] = {
0, 3, 32, 512, 4096, 32768,
};
static void __init at91_wakeup_status(struct platform_device *pdev)
{
struct shdwc *shdw = platform_get_drvdata(pdev);
u32 reg;
char *reason = "unknown";
reg = readl(shdw->at91_shdwc_base + AT91_SHDW_SR);
dev_dbg(&pdev->dev, "%s: status = %#x\n", __func__, reg);
/* Simple power-on, just bail out */
if (!reg)
return;
if (SHDW_WK_PIN(reg, shdw->cfg))
reason = "WKUP pin";
else if (SHDW_RTCWK(reg, shdw->cfg))
reason = "RTC";
pr_info("AT91: Wake-Up source: %s\n", reason);
}
static void at91_poweroff(void)
{
writel(AT91_SHDW_KEY | AT91_SHDW_SHDW,
at91_shdwc->at91_shdwc_base + AT91_SHDW_CR);
}
static u32 at91_shdwc_debouncer_value(struct platform_device *pdev,
u32 in_period_us)
{
int i;
int max_idx = ARRAY_SIZE(sdwc_dbc_period) - 1;
unsigned long long period_us;
unsigned long long max_period_us = DBC_PERIOD_US(sdwc_dbc_period[max_idx]);
if (in_period_us > max_period_us) {
dev_warn(&pdev->dev,
"debouncer period %u too big, reduced to %llu us\n",
in_period_us, max_period_us);
return max_idx;
}
for (i = max_idx - 1; i > 0; i--) {
period_us = DBC_PERIOD_US(sdwc_dbc_period[i]);
dev_dbg(&pdev->dev, "%s: ref[%d] = %llu\n",
__func__, i, period_us);
if (in_period_us > period_us)
break;
}
return i + 1;
}
static u32 at91_shdwc_get_wakeup_input(struct platform_device *pdev,
struct device_node *np)
{
struct device_node *cnp;
u32 wk_input_mask;
u32 wuir = 0;
u32 wk_input;
for_each_child_of_node(np, cnp) {
if (of_property_read_u32(cnp, "reg", &wk_input)) {
dev_warn(&pdev->dev, "reg property is missing for %s\n",
cnp->full_name);
continue;
}
wk_input_mask = 1 << wk_input;
if (!(wk_input_mask & AT91_SHDW_WKUPEN_MASK)) {
dev_warn(&pdev->dev,
"wake-up input %d out of bounds ignore\n",
wk_input);
continue;
}
wuir |= wk_input_mask;
if (of_property_read_bool(cnp, "atmel,wakeup-active-high"))
wuir |= AT91_SHDW_WKUPT(wk_input);
dev_dbg(&pdev->dev, "%s: (child %d) wuir = %#x\n",
__func__, wk_input, wuir);
}
return wuir;
}
static void at91_shdwc_dt_configure(struct platform_device *pdev)
{
struct shdwc *shdw = platform_get_drvdata(pdev);
struct device_node *np = pdev->dev.of_node;
u32 mode = 0, tmp, input;
if (!np) {
dev_err(&pdev->dev, "device node not found\n");
return;
}
if (!of_property_read_u32(np, "debounce-delay-us", &tmp))
mode |= AT91_SHDW_WKUPDBC(at91_shdwc_debouncer_value(pdev, tmp));
if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
mode |= SHDW_RTCWKEN(shdw->cfg);
dev_dbg(&pdev->dev, "%s: mode = %#x\n", __func__, mode);
writel(mode, shdw->at91_shdwc_base + AT91_SHDW_MR);
input = at91_shdwc_get_wakeup_input(pdev, np);
writel(input, shdw->at91_shdwc_base + AT91_SHDW_WUIR);
}
static const struct shdwc_config sama5d2_shdwc_config = {
.wkup_pin_input = 0,
.mr_rtcwk_shift = 17,
.sr_rtcwk_shift = 5,
};
static const struct of_device_id at91_shdwc_of_match[] = {
{
.compatible = "atmel,sama5d2-shdwc",
.data = &sama5d2_shdwc_config,
}, {
/*sentinel*/
}
};
MODULE_DEVICE_TABLE(of, at91_shdwc_of_match);
static int __init at91_shdwc_probe(struct platform_device *pdev)
{
struct resource *res;
const struct of_device_id *match;
int ret;
if (!pdev->dev.of_node)
return -ENODEV;
at91_shdwc = devm_kzalloc(&pdev->dev, sizeof(*at91_shdwc), GFP_KERNEL);
if (!at91_shdwc)
return -ENOMEM;
platform_set_drvdata(pdev, at91_shdwc);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
at91_shdwc->at91_shdwc_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(at91_shdwc->at91_shdwc_base)) {
dev_err(&pdev->dev, "Could not map reset controller address\n");
return PTR_ERR(at91_shdwc->at91_shdwc_base);
}
match = of_match_node(at91_shdwc_of_match, pdev->dev.of_node);
at91_shdwc->cfg = (struct shdwc_config *)(match->data);
sclk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(sclk))
return PTR_ERR(sclk);
ret = clk_prepare_enable(sclk);
if (ret) {
dev_err(&pdev->dev, "Could not enable slow clock\n");
return ret;
}
at91_wakeup_status(pdev);
at91_shdwc_dt_configure(pdev);
pm_power_off = at91_poweroff;
return 0;
}
static int __exit at91_shdwc_remove(struct platform_device *pdev)
{
struct shdwc *shdw = platform_get_drvdata(pdev);
if (pm_power_off == at91_poweroff)
pm_power_off = NULL;
/* Reset values to disable wake-up features */
writel(0, shdw->at91_shdwc_base + AT91_SHDW_MR);
writel(0, shdw->at91_shdwc_base + AT91_SHDW_WUIR);
clk_disable_unprepare(sclk);
return 0;
}
static struct platform_driver at91_shdwc_driver = {
.remove = __exit_p(at91_shdwc_remove),
.driver = {
.name = "at91-shdwc",
.of_match_table = at91_shdwc_of_match,
},
};
module_platform_driver_probe(at91_shdwc_driver, at91_shdwc_probe);
MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
MODULE_DESCRIPTION("Atmel shutdown controller driver");
MODULE_LICENSE("GPL v2");
...@@ -382,8 +382,6 @@ static int sbs_get_battery_property(struct i2c_client *client, ...@@ -382,8 +382,6 @@ static int sbs_get_battery_property(struct i2c_client *client,
if (ret & BATTERY_FULL_CHARGED) if (ret & BATTERY_FULL_CHARGED)
val->intval = POWER_SUPPLY_STATUS_FULL; val->intval = POWER_SUPPLY_STATUS_FULL;
else if (ret & BATTERY_FULL_DISCHARGED)
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
else if (ret & BATTERY_DISCHARGING) else if (ret & BATTERY_DISCHARGING)
val->intval = POWER_SUPPLY_STATUS_DISCHARGING; val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
else else
...@@ -702,8 +700,6 @@ static void sbs_delayed_work(struct work_struct *work) ...@@ -702,8 +700,6 @@ static void sbs_delayed_work(struct work_struct *work)
if (ret & BATTERY_FULL_CHARGED) if (ret & BATTERY_FULL_CHARGED)
ret = POWER_SUPPLY_STATUS_FULL; ret = POWER_SUPPLY_STATUS_FULL;
else if (ret & BATTERY_FULL_DISCHARGED)
ret = POWER_SUPPLY_STATUS_NOT_CHARGING;
else if (ret & BATTERY_DISCHARGING) else if (ret & BATTERY_DISCHARGING)
ret = POWER_SUPPLY_STATUS_DISCHARGING; ret = POWER_SUPPLY_STATUS_DISCHARGING;
else else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment