Commit 79d6205a authored by Laurent Pinchart's avatar Laurent Pinchart Committed by Mauro Carvalho Chehab

[media] v4l: tvp5150: Don't override output pinmuxing at stream on/off time

The s_stream() handler incorrectly writes the whole MISC_CTL register to
enable or disable the outputs, overriding the output pinmuxing
configuration. Fix it to only touch the output enable bits.

The CONF_SHARED_PIN register is also written by the same function,
resulting in muxing the INTREQ signal instead of the VBLK/GPCL signal on
the INTREQ/GPCL/VBLK pin. As the driver doesn't support interrupts this
is obviously incorrect, and breaks operation on other devices. Fix it by
removing the write.

Cc: stable@vger.kernel.org # For Kernel	4.5 and	upper
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent b4b2de38
......@@ -1058,22 +1058,27 @@ static const struct media_entity_operations tvp5150_sd_media_ops = {
static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
{
struct tvp5150 *decoder = to_tvp5150(sd);
/* Output format: 8-bit ITU-R BT.656 with embedded syncs */
int val = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_CLOCK_OE;
/* Output format: 8-bit 4:2:2 YUV with discrete sync */
if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
val = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE
| TVP5150_MISC_CTL_CLOCK_OE;
int val;
/* Initializes TVP5150 to its default values */
/* # set PCLK (27MHz) */
tvp5150_write(sd, TVP5150_CONF_SHARED_PIN, 0x00);
/* Enable or disable the video output signals. */
val = tvp5150_read(sd, TVP5150_MISC_CTL);
if (val < 0)
return val;
val &= ~(TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE |
TVP5150_MISC_CTL_CLOCK_OE);
if (enable) {
/*
* Enable the YCbCr and clock outputs. In discrete sync mode
* (non-BT.656) additionally enable the the sync outputs.
*/
val |= TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_CLOCK_OE;
if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
val |= TVP5150_MISC_CTL_SYNC_OE;
}
if (enable)
tvp5150_write(sd, TVP5150_MISC_CTL, val);
else
tvp5150_write(sd, TVP5150_MISC_CTL, 0x00);
tvp5150_write(sd, TVP5150_MISC_CTL, val);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment