Merge tag 'imx-dt-4.17' of...

Merge tag 'imx-dt-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Pull "i.MX device tree updates for 4.17" from Shawn Guo:

 - New board support: phyBOARD-Mira i.MX6 boards; Advantech DMS-BA16
   i.MX6Q board; Toradex Colibri iMX6ULL boards.
 - ZII RDU board updates: add RAVE SP device; disable on-chip watchdog
   as the external watchdog is being used instead; improve USDHC node
   regarding to voltage and SDIO capability.
 - i.MX6UL/ULL updates: cpufreq clock cleanup; add IOMUXC_SNVS pins and
   missing daisy chain configurations; add more devices like WDOG3,
   UART8, PMU, architected timer etc.
 - Hummingboard updates: correct USBOTG-ID pin; remove mention of
   nonexistent node.
 - Fix compatibles of atmel eeprom devices.
 - A couple of improvements on i.MX25 pinfunc header regarding to eSDHC
   pins.
 - A bunch of patches from Fabio and Marco to fix DTC warnings seen with
   W=1 switch.
 - Remove GPU subsystem nodes, as they are not needed by the etnaviv
   driver anymore and have been removed from the binding.
 - Add FIFO depth definition for i.MX25 SSI devices.
 - Add missing '#sound-dai-cells' for sgtl5000 codec which is complained
   by DTC.
 - Miscellaneous and random updates.

* tag 'imx-dt-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (66 commits)
  ARM: dts: i.MX25: define SSI FIFO depth
  ARM: dts: vf610m4: Remove the zero length reg property
  ARM: dts: vf610m4: Remove skeleton.dtsi inclusion
  ARM: dts: vf500: Remove the zero length reg property
  ARM: dts: vf: Add memory node unit name
  ARM: dts: vf500: Remove skeleton.dtsi inclusion
  ARM: dts: imx7s: add temperature monitor support
  ARM: dts: imx: Add missing #sound-dai-cells for sgtl5000 codec
  ARM: dts: imx51-zii-rdu1: Add node for RAVE SP device
  ARM: dts: imx6: RDU2: Add RAVE SP device
  ARM: dts: imx5: Pass the memory unit-address
  ARM: dts: imx7s: add spba-bus abstraction
  ARM: dts: imx6dl-icore-rqs: Fix invalid PHY address assignment for ethernet
  ARM: dts: imx6ul: add wdog3 node
  ARM: dts: imx7: add CPU PMU support
  ARM: dts: imx6dl-colibri-eval-v3: Add chosen node
  ARM: dts: imx6: Pass memory unit-adress
  ARM: dts: imx6dl: remove 'lcdif' node
  ARM: dts: hummingboard: Remove mention of nonexistent node
  ARM: dts: imx6qdl-hummingboard: fix USBOTG-ID pin
  ...

arch/arm/boot/dts/Makefile

@@ -401,6 +401,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-icore-rqs.dtb \
 	imx6dl-nit6xlite.dtb \
 	imx6dl-nitrogen6x.dtb \
+	imx6dl-phytec-mira-rdk-nand.dtb \
 	imx6dl-phytec-pbab01.dtb \
 	imx6dl-rex-basic.dtb \
 	imx6dl-riotboard.dtb \
@@ -440,6 +441,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-dfi-fs700-m60.dtb \
 	imx6q-display5-tianma-tm070-1280x768.dtb \
 	imx6q-dmo-edmqmx6.dtb \
+	imx6q-dms-ba16.dtb \
 	imx6q-evi.dtb \
 	imx6q-gk802.dtb \
 	imx6q-gw51xx.dtb \
@@ -470,6 +472,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-nitrogen6_max.dtb \
 	imx6q-nitrogen6_som2.dtb \
 	imx6q-novena.dtb \
+	imx6q-phytec-mira-rdk-emmc.dtb \
+	imx6q-phytec-mira-rdk-nand.dtb \
 	imx6q-phytec-pbab01.dtb \
 	imx6q-pistachio.dtb \
 	imx6q-rex-pro.dtb \
@@ -499,6 +503,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-zii-rdu2.dtb \
 	imx6qp-nitrogen6_max.dtb \
 	imx6qp-nitrogen6_som2.dtb \
+	imx6qp-phytec-mira-rdk-nand.dtb \
 	imx6qp-sabreauto.dtb \
 	imx6qp-sabresd.dtb \
 	imx6qp-tx6qp-8037.dtb \
@@ -531,7 +536,9 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-tx6ul-0010.dtb \
 	imx6ul-tx6ul-0011.dtb \
 	imx6ul-tx6ul-mainboard.dtb \
-	imx6ull-14x14-evk.dtb
+	imx6ull-14x14-evk.dtb \
+	imx6ull-colibri-eval-v3.dtb \
+	imx6ull-colibri-wifi-eval-v3.dtb
 dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-cl-som-imx7.dtb \
 	imx7d-colibri-emmc-eval-v3.dtb \

arch/arm/boot/dts/imx1-ads.dts

@@ -20,7 +20,7 @@ chosen {
 		stdout-path = &uart1;
 	};
 
-	memory {
+	memory@8000000 {
 		reg = <0x08000000 0x04000000>;
 	};
 

arch/arm/boot/dts/imx1-apf9328.dts

@@ -20,7 +20,7 @@ chosen {
 		stdout-path = &uart1;
 	};
 
-	memory {
+	memory@8000000 {
 		reg = <0x08000000 0x00800000>;
 	};
 };

arch/arm/boot/dts/imx1.dtsi

@@ -25,7 +25,7 @@ / {
 	 * Also for U-Boot there must be a pre-existing /memory node.
 	 */
 	chosen {};
-	memory { device_type = "memory"; reg = <0 0>; };
+	memory { device_type = "memory"; };
 
 	aliases {
 		gpio0 = &gpio1;

arch/arm/boot/dts/imx23-evk.dts

@@ -16,7 +16,7 @@ / {
 	model = "Freescale i.MX23 Evaluation Kit";
 	compatible = "fsl,imx23-evk", "fsl,imx23";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
 	};
 

arch/arm/boot/dts/imx23-olinuxino.dts

@@ -19,7 +19,7 @@ / {
 	model = "i.MX23 Olinuxino Low Cost Board";
 	compatible = "olimex,imx23-olinuxino", "fsl,imx23";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x04000000>;
 	};
 

arch/arm/boot/dts/imx23-sansa.dts

@@ -49,7 +49,7 @@ / {
 	model = "SanDisk Sansa Fuze+";
 	compatible = "sandisk,sansa_fuze_plus", "fsl,imx23";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x04000000>;
 	};
 

arch/arm/boot/dts/imx23-stmp378x_devb.dts

@@ -16,7 +16,7 @@ / {
 	model = "Freescale STMP378x Development Board";
 	compatible = "fsl,stmp378x-devb", "fsl,imx23";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x04000000>;
 	};
 

arch/arm/boot/dts/imx23-xfi3.dts

@@ -48,7 +48,7 @@ / {
 	model = "Creative ZEN X-Fi3";
 	compatible = "creative,x-fi3", "fsl,imx23";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x04000000>;
 	};
 

arch/arm/boot/dts/imx23.dtsi

@@ -23,7 +23,7 @@ / {
 	 * Also for U-Boot there must be a pre-existing /memory node.
 	 */
 	chosen {};
-	memory { device_type = "memory"; reg = <0 0>; };
+	memory { device_type = "memory"; };
 
 	aliases {
 		gpio0 = &gpio0;
@@ -222,7 +222,8 @@ MX23_PAD_GPMI_CE0N__GPMI_CE0N
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				gpmi_pins_fixup: gpmi-pins-fixup {
+				gpmi_pins_fixup: gpmi-pins-fixup@0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX23_PAD_GPMI_WPN__GPMI_WPN
 						MX23_PAD_GPMI_WRN__GPMI_WRN
@@ -266,7 +267,8 @@ MX23_PAD_SSP1_SCK__SSP1_SCK
 					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
-				mmc0_pins_fixup: mmc0-pins-fixup {
+				mmc0_pins_fixup: mmc0-pins-fixup@0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 						MX23_PAD_SSP1_SCK__SSP1_SCK

arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi

@@ -17,7 +17,7 @@ / {
 	model = "Eukrea CPUIMX25";
 	compatible = "eukrea,cpuimx25", "fsl,imx25";
 
-	memory {
+	memory@80000000 {
 		reg = <0x80000000 0x4000000>; /* 64M */
 	};
 };

arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts

@@ -88,12 +88,12 @@ MX25_PAD_KPP_COL0__AUD5_TXD		0xe0
 
 		pinctrl_esdhc1: esdhc1grp {
 			fsl,pins = <
-				MX25_PAD_SD1_CMD__SD1_CMD		0x400000c0
-				MX25_PAD_SD1_CLK__SD1_CLK		0x400000c0
-				MX25_PAD_SD1_DATA0__SD1_DATA0		0x400000c0
-				MX25_PAD_SD1_DATA1__SD1_DATA1		0x400000c0
-				MX25_PAD_SD1_DATA2__SD1_DATA2		0x400000c0
-				MX25_PAD_SD1_DATA3__SD1_DATA3		0x400000c0
+				MX25_PAD_SD1_CMD__ESDHC1_CMD		0x400000c0
+				MX25_PAD_SD1_CLK__ESDHC1_CLK		0x400000c0
+				MX25_PAD_SD1_DATA0__ESDHC1_DAT0		0x400000c0
+				MX25_PAD_SD1_DATA1__ESDHC1_DAT1		0x400000c0
+				MX25_PAD_SD1_DATA2__ESDHC1_DAT2		0x400000c0
+				MX25_PAD_SD1_DATA3__ESDHC1_DAT3		0x400000c0
 			>;
 		};
 

arch/arm/boot/dts/imx25-karo-tx25.dts

@@ -36,7 +36,7 @@ reg_fec_phy: regulator@0 {
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
 	};
 };

arch/arm/boot/dts/imx25-pdk.dts

@@ -18,7 +18,7 @@ / {
 	model = "Freescale i.MX25 Product Development Kit";
 	compatible = "fsl,imx25-pdk", "fsl,imx25";
 
-	memory {
+	memory@80000000 {
 		reg = <0x80000000 0x4000000>;
 	};
 
@@ -165,12 +165,12 @@ MX25_PAD_D14__GPIO_4_6 			0x80000000
 
 		pinctrl_esdhc1: esdhc1grp {
 			fsl,pins = <
-				MX25_PAD_SD1_CMD__SD1_CMD		0x80000000
-				MX25_PAD_SD1_CLK__SD1_CLK		0x80000000
-				MX25_PAD_SD1_DATA0__SD1_DATA0		0x80000000
-				MX25_PAD_SD1_DATA1__SD1_DATA1		0x80000000
-				MX25_PAD_SD1_DATA2__SD1_DATA2		0x80000000
-				MX25_PAD_SD1_DATA3__SD1_DATA3		0x80000000
+				MX25_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+				MX25_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+				MX25_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+				MX25_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+				MX25_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+				MX25_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
 				MX25_PAD_A14__GPIO_2_0			0x80000000
 				MX25_PAD_A15__GPIO_2_1			0x80000000
 			>;

arch/arm/boot/dts/imx25-pinfunc.h

@@ -151,21 +151,21 @@
 #define MX25_PAD_D15__D15			0x088 0x280 0x000 0x00 0x000
 #define MX25_PAD_D15__LD16			0x088 0x280 0x000 0x01 0x000
 #define MX25_PAD_D15__GPIO_4_5			0x088 0x280 0x000 0x05 0x000
-#define MX25_PAD_D15__SDHC1_DAT7		0x088 0x280 0x4d8 0x06 0x000
+#define MX25_PAD_D15__ESDHC1_DAT7		0x088 0x280 0x4d8 0x06 0x000
 
 #define MX25_PAD_D14__D14			0x08c 0x284 0x000 0x00 0x000
 #define MX25_PAD_D14__LD17			0x08c 0x284 0x000 0x01 0x000
 #define MX25_PAD_D14__GPIO_4_6			0x08c 0x284 0x000 0x05 0x000
-#define MX25_PAD_D14__SDHC1_DAT6		0x08c 0x284 0x4d4 0x06 0x000
+#define MX25_PAD_D14__ESDHC1_DAT6		0x08c 0x284 0x4d4 0x06 0x000
 
 #define MX25_PAD_D13__D13			0x090 0x288 0x000 0x00 0x000
 #define MX25_PAD_D13__LD18			0x090 0x288 0x000 0x01 0x000
 #define MX25_PAD_D13__GPIO_4_7			0x090 0x288 0x000 0x05 0x000
-#define MX25_PAD_D13__SDHC1_DAT5		0x090 0x288 0x4d0 0x06 0x000
+#define MX25_PAD_D13__ESDHC1_DAT5		0x090 0x288 0x4d0 0x06 0x000
 
 #define MX25_PAD_D12__D12			0x094 0x28c 0x000 0x00 0x000
 #define MX25_PAD_D12__GPIO_4_8			0x094 0x28c 0x000 0x05 0x000
-#define MX25_PAD_D12__SDHC1_DAT4		0x094 0x28c 0x4cc 0x06 0x000
+#define MX25_PAD_D12__ESDHC1_DAT4		0x094 0x28c 0x4cc 0x06 0x000
 
 #define MX25_PAD_D11__D11			0x098 0x290 0x000 0x00 0x000
 #define MX25_PAD_D11__GPIO_4_9			0x098 0x290 0x000 0x05 0x000
@@ -236,12 +236,13 @@
 #define MX25_PAD_LD8__LD8			0x0e8 0x2e0 0x000 0x00 0x000
 #define MX25_PAD_LD8__UART4_RXD			0x0e8 0x2e0 0x570 0x02 0x000
 #define MX25_PAD_LD8__FEC_TX_ERR		0x0e8 0x2e0 0x000 0x05 0x000
-#define MX25_PAD_LD8__SDHC2_CMD			0x0e8 0x2e0 0x4e0 0x06 0x000
+/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */
+#define MX25_PAD_LD8__ESDHC2_CMD		0x0e8 0x2e0 0x4e0 0x16 0x000
 
 #define MX25_PAD_LD9__LD9			0x0ec 0x2e4 0x000 0x00 0x000
 #define MX25_PAD_LD9__UART4_TXD			0x0ec 0x2e4 0x000 0x02 0x000
 #define MX25_PAD_LD9__FEC_COL			0x0ec 0x2e4 0x504 0x05 0x001
-#define MX25_PAD_LD9__SDHC2_CLK			0x0ec 0x2e4 0x4dc 0x06 0x000
+#define MX25_PAD_LD9__ESDHC2_CLK		0x0ec 0x2e4 0x4dc 0x06 0x000
 
 #define MX25_PAD_LD10__LD10			0x0f0 0x2e8 0x000 0x00 0x000
 #define MX25_PAD_LD10__UART4_RTS		0x0f0 0x2e8 0x56c 0x02 0x000
@@ -250,7 +251,7 @@
 #define MX25_PAD_LD11__LD11			0x0f4 0x2ec 0x000 0x00 0x000
 #define MX25_PAD_LD11__UART4_CTS		0x0f4 0x2ec 0x000 0x02 0x000
 #define MX25_PAD_LD11__FEC_RDATA2		0x0f4 0x2ec 0x50c 0x05 0x001
-#define MX25_PAD_LD11__SDHC2_DAT1		0x0f4 0x2ec 0x4e8 0x06 0x000
+#define MX25_PAD_LD11__ESDHC2_DAT1		0x0f4 0x2ec 0x4e8 0x06 0x000
 
 #define MX25_PAD_LD12__LD12			0x0f8 0x2f0 0x000 0x00 0x000
 #define MX25_PAD_LD12__CSPI2_MOSI		0x0f8 0x2f0 0x4a0 0x02 0x000
@@ -316,12 +317,13 @@
 #define MX25_PAD_CSI_D5__CSPI3_RDY		0x12c 0x324 0x000 0x07 0x000
 
 #define MX25_PAD_CSI_D6__CSI_D6			0x130 0x328 0x000 0x00 0x000
-#define MX25_PAD_CSI_D6__SDHC2_CMD		0x130 0x328 0x4e0 0x02 0x001
+/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */
+#define MX25_PAD_CSI_D6__ESDHC2_CMD		0x130 0x328 0x4e0 0x12 0x001
 #define MX25_PAD_CSI_D6__SIM1_PD0		0x130 0x328 0x000 0x04 0x000
 #define MX25_PAD_CSI_D6__GPIO_1_31		0x130 0x328 0x000 0x05 0x000
 
 #define MX25_PAD_CSI_D7__CSI_D7			0x134 0x32c 0x000 0x00 0x000
-#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK		0x134 0x32C 0x4dc 0x02 0x001
+#define MX25_PAD_CSI_D7__ESDHC2_CLK		0x134 0x32C 0x4dc 0x02 0x001
 #define MX25_PAD_CSI_D7__GPIO_1_6		0x134 0x32c 0x000 0x05 0x000
 
 #define MX25_PAD_CSI_D8__CSI_D8			0x138 0x330 0x000 0x00 0x000
@@ -336,22 +338,22 @@
 
 #define MX25_PAD_CSI_MCLK__CSI_MCLK		0x140 0x338 0x000 0x00 0x000
 #define MX25_PAD_CSI_MCLK__AUD6_TXD		0x140 0x338 0x000 0x01 0x000
-#define MX25_PAD_CSI_MCLK__SDHC2_DAT0		0x140 0x338 0x4e4 0x02 0x001
+#define MX25_PAD_CSI_MCLK__ESDHC2_DAT0		0x140 0x338 0x4e4 0x02 0x001
 #define MX25_PAD_CSI_MCLK__GPIO_1_8		0x140 0x338 0x000 0x05 0x000
 
 #define MX25_PAD_CSI_VSYNC__CSI_VSYNC		0x144 0x33c 0x000 0x00 0x000
 #define MX25_PAD_CSI_VSYNC__AUD6_RXD		0x144 0x33c 0x000 0x01 0x000
-#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1		0x144 0x33c 0x4e8 0x02 0x001
+#define MX25_PAD_CSI_VSYNC__ESDHC2_DAT1		0x144 0x33c 0x4e8 0x02 0x001
 #define MX25_PAD_CSI_VSYNC__GPIO_1_9		0x144 0x33c 0x000 0x05 0x000
 
 #define MX25_PAD_CSI_HSYNC__CSI_HSYNC		0x148 0x340 0x000 0x00 0x000
 #define MX25_PAD_CSI_HSYNC__AUD6_TXC		0x148 0x340 0x000 0x01 0x000
-#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2		0x148 0x340 0x4ec 0x02 0x001
+#define MX25_PAD_CSI_HSYNC__ESDHC2_DAT2		0x148 0x340 0x4ec 0x02 0x001
 #define MX25_PAD_CSI_HSYNC__GPIO_1_10		0x148 0x340 0x000 0x05 0x000
 
 #define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		0x14c 0x344 0x000 0x00 0x000
 #define MX25_PAD_CSI_PIXCLK__AUD6_TXFS		0x14c 0x344 0x000 0x01 0x000
-#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3		0x14c 0x344 0x4f0 0x02 0x001
+#define MX25_PAD_CSI_PIXCLK__ESDHC2_DAT3	0x14c 0x344 0x4f0 0x02 0x001
 #define MX25_PAD_CSI_PIXCLK__GPIO_1_11		0x14c 0x344 0x000 0x05 0x000
 
 #define MX25_PAD_I2C1_CLK__I2C1_CLK		0x150 0x348 0x000 0x00 0x000
@@ -419,37 +421,37 @@
 #define MX25_PAD_UART2_CTS__GPIO_4_29		0x18c 0x384 0x000 0x05 0x000
 
 /*
- * Removing the SION bit from MX25_PAD_SD1_CMD__SD1_CMD breaks detecting an SD
+ * Removing the SION bit from MX25_PAD_*__ESDHCn_CMD breaks detecting an SD
  * card. According to the i.MX25 reference manual (e.g. Figure 23-2 in IMX25RM
  * Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a silicon
- * bug that configuring the SD1_CMD function doesn't enable the input path for
- * this pin.
+ * bug that configuring the ESDHCn_CMD function doesn't enable the input path
+ * for this pin.
  * This might have side effects for other hardware units that are connected to
  * that pin and use the respective function as input.
  */
-#define MX25_PAD_SD1_CMD__SD1_CMD		0x190 0x388 0x000 0x10 0x000
+#define MX25_PAD_SD1_CMD__ESDHC1_CMD		0x190 0x388 0x000 0x10 0x000
 #define MX25_PAD_SD1_CMD__CSPI2_MOSI		0x190 0x388 0x4a0 0x01 0x001
 #define MX25_PAD_SD1_CMD__FEC_RDATA2		0x190 0x388 0x50c 0x02 0x002
 #define MX25_PAD_SD1_CMD__GPIO_2_23		0x190 0x388 0x000 0x05 0x000
 
-#define MX25_PAD_SD1_CLK__SD1_CLK		0x194 0x38c 0x000 0x00 0x000
+#define MX25_PAD_SD1_CLK__ESDHC1_CLK		0x194 0x38c 0x000 0x00 0x000
 #define MX25_PAD_SD1_CLK__CSPI2_MISO		0x194 0x38c 0x49c 0x01 0x001
 #define MX25_PAD_SD1_CLK__FEC_RDATA3		0x194 0x38c 0x510 0x02 0x002
 #define MX25_PAD_SD1_CLK__GPIO_2_24		0x194 0x38c 0x000 0x05 0x000
 
-#define MX25_PAD_SD1_DATA0__SD1_DATA0		0x198 0x390 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA0__ESDHC1_DAT0		0x198 0x390 0x000 0x00 0x000
 #define MX25_PAD_SD1_DATA0__CSPI2_SCLK		0x198 0x390 0x494 0x01 0x001
 #define MX25_PAD_SD1_DATA0__GPIO_2_25		0x198 0x390 0x000 0x05 0x000
 
-#define MX25_PAD_SD1_DATA1__SD1_DATA1		0x19c 0x394 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA1__ESDHC1_DAT1		0x19c 0x394 0x000 0x00 0x000
 #define MX25_PAD_SD1_DATA1__AUD7_RXD		0x19c 0x394 0x478 0x03 0x000
 #define MX25_PAD_SD1_DATA1__GPIO_2_26		0x19c 0x394 0x000 0x05 0x000
 
-#define MX25_PAD_SD1_DATA2__SD1_DATA2		0x1a0 0x398 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA2__ESDHC1_DAT2		0x1a0 0x398 0x000 0x00 0x000
 #define MX25_PAD_SD1_DATA2__FEC_RX_CLK		0x1a0 0x398 0x514 0x02 0x002
 #define MX25_PAD_SD1_DATA2__GPIO_2_27		0x1a0 0x398 0x000 0x05 0x000
 
-#define MX25_PAD_SD1_DATA3__SD1_DATA3		0x1a4 0x39c 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA3__ESDHC1_DAT3		0x1a4 0x39c 0x000 0x00 0x000
 #define MX25_PAD_SD1_DATA3__FEC_CRS		0x1a4 0x39c 0x508 0x02 0x002
 #define MX25_PAD_SD1_DATA3__GPIO_2_28		0x1a4 0x39c 0x000 0x05 0x000
 
@@ -496,6 +498,8 @@
 #define MX25_PAD_KPP_COL3__GPIO_3_4		0x1c4 0x3bc 0x000 0x05 0x000
 
 #define MX25_PAD_FEC_MDC__FEC_MDC		0x1c8 0x3c0 0x000 0x00 0x000
+/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */
+#define MX25_PAD_FEC_MDC__ESDHC2_CMD		0x1c8 0x3c0 0x4e0 0x11 0x002
 #define MX25_PAD_FEC_MDC__AUD4_TXD		0x1c8 0x3c0 0x464 0x02 0x001
 #define MX25_PAD_FEC_MDC__GPIO_3_5		0x1c8 0x3c0 0x000 0x05 0x000
 
@@ -601,4 +605,28 @@
 #define MX25_PAD_BOOT_MODE1__BOOT_MODE1		0x228 0x000 0x000 0x00 0x000
 #define MX25_PAD_BOOT_MODE1__GPIO_4_31		0x228 0x000 0x000 0x05 0x000
 
+/*
+ * Compatibility defines for out-of-tree users. You should update if you make
+ * use of one of them.
+ */
+#define MX25_PAD_D15__SDHC1_DAT7		MX25_PAD_D15__ESDHC1_DAT7
+#define MX25_PAD_D14__SDHC1_DAT6		MX25_PAD_D14__ESDHC1_DAT6
+#define MX25_PAD_D13__SDHC1_DAT5		MX25_PAD_D13__ESDHC1_DAT5
+#define MX25_PAD_D12__SDHC1_DAT4		MX25_PAD_D12__ESDHC1_DAT4
+#define MX25_PAD_LD8__SDHC2_CMD			MX25_PAD_LD8__ESDHC2_CMD
+#define MX25_PAD_LD9__SDHC2_CLK			MX25_PAD_LD9__ESDHC2_CLK
+#define MX25_PAD_LD11__SDHC2_DAT1		MX25_PAD_LD11__ESDHC2_DAT1
+#define MX25_PAD_CSI_D6__SDHC2_CMD		MX25_PAD_CSI_D6__ESDHC2_CMD
+#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK		MX25_PAD_CSI_D7__ESDHC2_CLK
+#define MX25_PAD_CSI_MCLK__SDHC2_DAT0		MX25_PAD_CSI_MCLK__ESDHC2_DAT0
+#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1		MX25_PAD_CSI_VSYNC__ESDHC2_DAT1
+#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2		MX25_PAD_CSI_HSYNC__ESDHC2_DAT2
+#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3		MX25_PAD_CSI_PIXCLK__ESDHC2_DAT3
+#define MX25_PAD_SD1_CMD__SD1_CMD		MX25_PAD_SD1_CMD__ESDHC1_CMD
+#define MX25_PAD_SD1_CLK__SD1_CLK		MX25_PAD_SD1_CLK__ESDHC1_CLK
+#define MX25_PAD_SD1_DATA0__SD1_DATA0		MX25_PAD_SD1_DATA0__ESDHC1_DAT0
+#define MX25_PAD_SD1_DATA1__SD1_DATA1		MX25_PAD_SD1_DATA1__ESDHC1_DAT1
+#define MX25_PAD_SD1_DATA2__SD1_DATA2		MX25_PAD_SD1_DATA2__ESDHC1_DAT2
+#define MX25_PAD_SD1_DATA3__SD1_DATA3		MX25_PAD_SD1_DATA3__ESDHC1_DAT3
+
 #endif /* __DTS_IMX25_PINFUNC_H */

arch/arm/boot/dts/imx25.dtsi

@@ -22,7 +22,7 @@ / {
 	 * Also for U-Boot there must be a pre-existing /memory node.
 	 */
 	chosen {};
-	memory { device_type = "memory"; reg = <0 0>; };
+	memory { device_type = "memory"; };
 
 	aliases {
 		ethernet0 = &fec;
@@ -269,6 +269,7 @@ ssi2: ssi@50014000 {
 				dmas = <&sdma 24 1 0>,
 				       <&sdma 25 1 0>;
 				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
 				status = "disabled";
 			};
 
@@ -329,6 +330,7 @@ ssi1: ssi@50034000 {
 				dmas = <&sdma 28 1 0>,
 				       <&sdma 29 1 0>;
 				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/imx27-apf27.dts

@@ -19,7 +19,7 @@ / {
 	model = "Armadeus Systems APF27 module";
 	compatible = "armadeus,imx27-apf27", "fsl,imx27";
 
-	memory {
+	memory@a0000000 {
 		reg = <0xa0000000 0x04000000>;
 	};
 

arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi

@@ -16,21 +16,14 @@ / {
 	model = "Eukrea CPUIMX27";
 	compatible = "eukrea,cpuimx27", "fsl,imx27";
 
-	memory {
+	memory@a0000000 {
 		reg = <0xa0000000 0x04000000>;
 	};
 
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
-
-		clk14745600: clock@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <14745600>;
-			reg = <0>;
-		};
+	clk14745600: clk-uart {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <14745600>;
 	};
 };
 

arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts

@@ -84,7 +84,7 @@ &cspi1 {
 	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	ads7846 {
+	ads7846@0 {
 		compatible = "ti,ads7846";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_touch>;

arch/arm/boot/dts/imx27-pdk.dts

@@ -16,7 +16,7 @@ / {
 	model = "Freescale i.MX27 Product Development Kit";
 	compatible = "fsl,imx27-pdk", "fsl,imx27";
 
-	memory {
+	memory@a0000000 {
 		reg = <0xa0000000 0x08000000>;
 	};
 

arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi

@@ -17,7 +17,7 @@ / {
 	model = "Phytec pca100";
 	compatible = "phytec,imx27-pca100", "fsl,imx27";
 
-	memory {
+	memory@a0000000 {
 		reg = <0xa0000000 0x08000000>; /* 128MB */
 	};
 };

arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi

@@ -16,7 +16,7 @@ / {
 	model = "Phytec pcm038";
 	compatible = "phytec,imx27-pcm038", "fsl,imx27";
 
-	memory {
+	memory@a0000000 {
 		reg = <0xa0000000 0x08000000>;
 	};
 

arch/arm/boot/dts/imx27.dtsi

@@ -26,7 +26,7 @@ / {
 	 * Also for U-Boot there must be a pre-existing /memory node.
 	 */
 	chosen {};
-	memory { device_type = "memory"; reg = <0 0>; };
+	memory { device_type = "memory"; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx28-apf28.dts

@@ -16,7 +16,7 @@ / {
 	model = "Armadeus Systems APF28 module";
 	compatible = "armadeus,imx28-apf28", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
 	};
 

arch/arm/boot/dts/imx28-apx4devkit.dts

@@ -6,7 +6,7 @@ / {
 	model = "Bluegiga APX4 Development Kit";
 	compatible = "bluegiga,apx4devkit", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x04000000>;
 	};
 
@@ -82,7 +82,8 @@ MX28_PAD_SSP2_SS2__SSP2_D2
 					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
-				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
+				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_SSP0_DATA7__SSP2_SCK
 					>;
@@ -146,6 +147,7 @@ i2c0: i2c@80058000 {
 				sgtl5000: codec@a {
 					compatible = "fsl,sgtl5000";
 					reg = <0x0a>;
+					#sound-dai-cells = <0>;
 					VDDA-supply = <&reg_3p3v>;
 					VDDIO-supply = <&reg_3p3v>;
 					clocks = <&saif0>;

arch/arm/boot/dts/imx28-cfa10036.dts

@@ -16,7 +16,7 @@ / {
 	model = "Crystalfontz CFA-10036 Board";
 	compatible = "crystalfontz,cfa10036", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
 	};
 

arch/arm/boot/dts/imx28-cfa10049.dts

@@ -19,6 +19,71 @@ / {
 	model = "Crystalfontz CFA-10049 Board";
 	compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
 
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2cmux_pins_cfa10049>;
+		mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
+		i2c-parent = <&i2c1>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adc0: nau7802@2a {
+				compatible = "nuvoton,nau7802";
+				reg = <0x2a>;
+				nuvoton,vldo = <3000>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			adc1: nau7802@2a {
+				compatible = "nuvoton,nau7802";
+				reg = <0x2a>;
+				nuvoton,vldo = <3000>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+				adc2: nau7802@2a {
+				compatible = "nuvoton,nau7802";
+				reg = <0x2a>;
+				nuvoton,vldo = <3000>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pca9555: pca9555@20 {
+				compatible = "nxp,pca9555";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pca_pins_cfa10049>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <19 0x2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x20>;
+			};
+		};
+	};
+
 	apb@80000000 {
 		apbh@80000000 {
 			pinctrl@80018000 {
@@ -219,71 +284,6 @@ i2c1: i2c@8005a000 {
 				status = "okay";
 			};
 
-			i2cmux {
-				compatible = "i2c-mux-gpio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2cmux_pins_cfa10049>;
-				mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
-				i2c-parent = <&i2c1>;
-
-				i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-					adc0: nau7802@2a {
-						compatible = "nuvoton,nau7802";
-						reg = <0x2a>;
-						nuvoton,vldo = <3000>;
-					};
-				};
-
-				i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-
-					adc1: nau7802@2a {
-						compatible = "nuvoton,nau7802";
-						reg = <0x2a>;
-						nuvoton,vldo = <3000>;
-					};
-				};
-
-				i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-
-					adc2: nau7802@2a {
-						compatible = "nuvoton,nau7802";
-						reg = <0x2a>;
-						nuvoton,vldo = <3000>;
-					};
-				};
-
-				i2c@3 {
-					reg = <3>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					pca9555: pca9555@20 {
-						compatible = "nxp,pca9555";
-						pinctrl-names = "default";
-						pinctrl-0 = <&pca_pins_cfa10049>;
-						interrupt-parent = <&gpio2>;
-						interrupts = <19 0x2>;
-						gpio-controller;
-						#gpio-cells = <2>;
-						interrupt-controller;
-						#interrupt-cells = <2>;
-						reg = <0x20>;
-					};
-				};
-			};
-
 			usbphy1: usbphy@8007e000 {
 				status = "okay";
 			};

arch/arm/boot/dts/imx28-duckbill-2-485.dts

@@ -19,7 +19,7 @@ / {
 	model = "I2SE Duckbill 2 485";
 	compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
 	};
 

arch/arm/boot/dts/imx28-duckbill-2-enocean.dts

@@ -20,7 +20,7 @@ / {
 	model = "I2SE Duckbill 2 EnOcean";
 	compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
 	};
 

arch/arm/boot/dts/imx28-duckbill-2-spi.dts

@@ -23,7 +23,7 @@ aliases {
 		ethernet1 = &qca7000;
 	};
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
 	};
 

arch/arm/boot/dts/imx28-duckbill-2.dts

@@ -19,7 +19,7 @@ / {
 	model = "I2SE Duckbill 2";
 	compatible = "i2se,duckbill-2", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
 	};
 

arch/arm/boot/dts/imx28-duckbill.dts

@@ -18,7 +18,7 @@ / {
 	model = "I2SE Duckbill";
 	compatible = "i2se,duckbill", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
 	};
 

arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts

@@ -23,7 +23,7 @@ / {
 	model = "Eukrea Electromatique MBMX283LC";
 	compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x04000000>;
 	};
 };

arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts

@@ -22,7 +22,7 @@ / {
 	model = "Eukrea Electromatique MBMX287LC";
 	compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
 	};
 };

arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi

@@ -151,6 +151,7 @@ &i2c0 {
 	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
 		clocks = <&saif0>;

arch/arm/boot/dts/imx28-evk.dts

@@ -16,7 +16,7 @@ / {
 	model = "Freescale i.MX28 Evaluation Kit";
 	compatible = "fsl,imx28-evk", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
 	};
 
@@ -197,6 +197,7 @@ i2c0: i2c@80058000 {
 				sgtl5000: codec@a {
 					compatible = "fsl,sgtl5000";
 					reg = <0x0a>;
+					#sound-dai-cells = <0>;
 					VDDA-supply = <&reg_3p3v>;
 					VDDIO-supply = <&reg_3p3v>;
 					clocks = <&saif0>;

arch/arm/boot/dts/imx28-m28.dtsi

@@ -15,7 +15,7 @@ / {
 	model = "Aries/DENX M28";
 	compatible = "aries,m28", "denx,m28", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
 	};
 

arch/arm/boot/dts/imx28-m28cu3.dts

@@ -16,7 +16,7 @@ / {
 	model = "MSR M28CU3";
 	compatible = "msr,m28cu3", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
 	};
 

arch/arm/boot/dts/imx28-m28evk.dts

@@ -140,6 +140,7 @@ i2c0: i2c@80058000 {
 				sgtl5000: codec@a {
 					compatible = "fsl,sgtl5000";
 					reg = <0x0a>;
+					#sound-dai-cells = <0>;
 					VDDA-supply = <&reg_3p3v>;
 					VDDIO-supply = <&reg_3p3v>;
 					clocks = <&saif0>;

arch/arm/boot/dts/imx28-sps1.dts

@@ -16,7 +16,7 @@ / {
 	model = "SchulerControl GmbH, SC SPS 1";
 	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
 	};
 

arch/arm/boot/dts/imx28-ts4600.dts

@@ -19,7 +19,7 @@ / {
 	model = "Technologic Systems i.MX28 TS-4600";
 	compatible = "technologic,imx28-ts4600", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x10000000>;   /* 256MB */
 	};
 

arch/arm/boot/dts/imx28-tx28.dts

@@ -65,8 +65,8 @@ aliases {
 		usbotg = &usb0;
 	};
 
-	memory {
-		reg = <0 0>; /* will be filled in by U-Boot */
+	memory@40000000 {
+		reg = <0x40000000 0>; /* will be filled in by U-Boot */
 	};
 
 	onewire {
@@ -531,7 +531,8 @@ MX28_PAD_ENET0_RXD3__GPIO_4_10 /* module LED */
 		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins {
+	tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */
 			MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */
@@ -542,7 +543,8 @@ MX28_PAD_ENET0_RXD2__GPIO_4_9 /* WAKE */
 		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins {
+	tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			MX28_PAD_LCD_D00__GPIO_1_0
 		>;
@@ -551,7 +553,8 @@ MX28_PAD_LCD_D00__GPIO_1_0
 		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	tx28_lcdif_23bit_pins: tx28-lcdif-23bit {
+	tx28_lcdif_23bit_pins: tx28-lcdif-23bit@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			/* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */
 			MX28_PAD_LCD_D01__LCD_D1
@@ -583,7 +586,8 @@ MX28_PAD_LCD_D23__LCD_D23
 		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl {
+	tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */
 			MX28_PAD_LCD_RESET__GPIO_3_30  /* Reset */
@@ -593,7 +597,8 @@ MX28_PAD_LCD_RESET__GPIO_3_30  /* Reset */
 		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	tx28_mac0_pins_gpio: tx28-mac0-gpio-pins {
+	tx28_mac0_pins_gpio: tx28-mac0-gpio-pins@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			MX28_PAD_ENET0_MDC__GPIO_4_0
 			MX28_PAD_ENET0_MDIO__GPIO_4_1
@@ -610,7 +615,8 @@ MX28_PAD_ENET_CLK__GPIO_4_16
 		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	tx28_pca9554_pins: tx28-pca9554-pins {
+	tx28_pca9554_pins: tx28-pca9554-pins@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			MX28_PAD_PWM3__GPIO_3_28
 		>;
@@ -619,7 +625,8 @@ MX28_PAD_PWM3__GPIO_3_28
 		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	tx28_spi_gpio_pins: spi-gpiogrp {
+	tx28_spi_gpio_pins: spi-gpiogrp@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			MX28_PAD_AUART2_RX__GPIO_3_8
 			MX28_PAD_AUART2_TX__GPIO_3_9
@@ -633,7 +640,8 @@ MX28_PAD_SSP3_SS0__GPIO_2_27
 		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	tx28_tsc2007_pins: tx28-tsc2007-pins {
+	tx28_tsc2007_pins: tx28-tsc2007-pins@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */
 		>;
@@ -643,7 +651,8 @@ MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */
 	};
 
 
-	tx28_usbphy0_pins: tx28-usbphy0-pins {
+	tx28_usbphy0_pins: tx28-usbphy0-pins@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */
 			MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */
@@ -653,7 +662,8 @@ MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */
 		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	tx28_usbphy1_pins: tx28-usbphy1-pins {
+	tx28_usbphy1_pins: tx28-usbphy1-pins@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */
 			MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */

arch/arm/boot/dts/imx28.dtsi

@@ -24,7 +24,7 @@ / {
 	 * Also for U-Boot there must be a pre-existing /memory node.
 	 */
 	chosen {};
-	memory { device_type = "memory"; reg = <0 0>; };
+	memory { device_type = "memory"; };
 
 	aliases {
 		ethernet0 = &mac0;
@@ -283,7 +283,8 @@ MX28_PAD_GPMI_RESETN__GPMI_RESETN
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				gpmi_status_cfg: gpmi-status-cfg {
+				gpmi_status_cfg: gpmi-status-cfg@0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_GPMI_RDN__GPMI_RDN
 						MX28_PAD_GPMI_WRN__GPMI_WRN
@@ -527,14 +528,16 @@ MX28_PAD_SSP0_SCK__SSP0_SCK
 					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
-				mmc0_cd_cfg: mmc0-cd-cfg {
+				mmc0_cd_cfg: mmc0-cd-cfg@0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 					>;
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				mmc0_sck_cfg: mmc0-sck-cfg {
+				mmc0_sck_cfg: mmc0-sck-cfg@0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_SSP0_SCK__SSP0_SCK
 					>;
@@ -558,14 +561,16 @@ MX28_PAD_GPMI_WRN__SSP1_SCK
 					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
-				mmc1_cd_cfg: mmc1-cd-cfg {
+				mmc1_cd_cfg: mmc1-cd-cfg@0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
 					>;
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				mmc1_sck_cfg: mmc1-sck-cfg {
+				mmc1_sck_cfg: mmc1-sck-cfg@0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_GPMI_WRN__SSP1_SCK
 					>;
@@ -606,7 +611,8 @@ MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
-				mmc2_cd_cfg: mmc2-cd-cfg {
+				mmc2_cd_cfg: mmc2-cd-cfg@0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 					>;

arch/arm/boot/dts/imx31-bug.dts

@@ -16,7 +16,7 @@ / {
 	model = "Buglabs i.MX31 Bug 1.x";
 	compatible = "buglabs,imx31-bug", "fsl,imx31";
 
-	memory {
+	memory@80000000 {
 		reg = <0x80000000 0x8000000>; /* 128M */
 	};
 };

arch/arm/boot/dts/imx31.dtsi

@@ -19,7 +19,7 @@ / {
 	 * Also for U-Boot there must be a pre-existing /memory node.
 	 */
 	chosen {};
-	memory { device_type = "memory"; reg = <0 0>; };
+	memory { device_type = "memory"; };
 
 	aliases {
 		serial0 = &uart1;

arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi

@@ -17,7 +17,7 @@ / {
 	model = "Eukrea CPUIMX35";
 	compatible = "eukrea,cpuimx35", "fsl,imx35";
 
-	memory {
+	memory@80000000 {
 		reg = <0x80000000 0x8000000>; /* 128M */
 	};
 };

arch/arm/boot/dts/imx35-pdk.dts

@@ -17,7 +17,7 @@ / {
 	model = "Freescale i.MX35 Product Development Kit";
 	compatible = "fsl,imx35-pdk", "fsl,imx35";
 
-	memory {
+	memory@80000000 {
 		reg = <0x80000000 0x8000000>,
 		      <0x90000000 0x8000000>;
 	};

arch/arm/boot/dts/imx35.dtsi

@@ -20,7 +20,7 @@ / {
 	 * Also for U-Boot there must be a pre-existing /memory node.
 	 */
 	chosen {};
-	memory { device_type = "memory"; reg = <0 0>; };
+	memory { device_type = "memory"; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx50-evk.dts

@@ -18,7 +18,7 @@ / {
 	model = "Freescale i.MX50 Evaluation Kit";
 	compatible = "fsl,imx50-evk", "fsl,imx50";
 
-	memory {
+	memory@70000000 {
 		reg = <0x70000000 0x80000000>;
 	};
 };

arch/arm/boot/dts/imx50.dtsi

@@ -25,7 +25,7 @@ / {
 	 * Also for U-Boot there must be a pre-existing /memory node.
 	 */
 	chosen {};
-	memory { device_type = "memory"; reg = <0 0>; };
+	memory { device_type = "memory"; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx51-apf51.dts

@@ -21,7 +21,7 @@ / {
 	model = "Armadeus Systems APF51 module";
 	compatible = "armadeus,imx51-apf51", "fsl,imx51";
 
-	memory {
+	memory@90000000 {
 		reg = <0x90000000 0x20000000>;
 	};
 

arch/arm/boot/dts/imx51-babbage.dts

@@ -21,7 +21,7 @@ chosen {
 		stdout-path = &uart1;
 	};
 
-	memory {
+	memory@90000000 {
 		reg = <0x90000000 0x20000000>;
 	};
 
@@ -369,6 +369,7 @@ &i2c2 {
 	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clk_audio>;
 		VDDA-supply = <&vdig_reg>;
 		VDDIO-supply = <&vvideo_reg>;

arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi

@@ -16,7 +16,7 @@ / {
 	model = "Digi ConnectCore CC(W)-MX51";
 	compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51";
 
-	memory {
+	memory@90000000 {
 		reg = <0x90000000 0x08000000>;
 	};
 };

arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi

@@ -22,7 +22,7 @@ / {
 	model = "Eukrea CPUIMX51";
 	compatible = "eukrea,cpuimx51", "fsl,imx51";
 
-	memory {
+	memory@90000000 {
 		reg = <0x90000000 0x10000000>; /* 256M */
 	};
 };

arch/arm/boot/dts/imx51-ts4800.dts

@@ -17,7 +17,7 @@ chosen {
 		stdout-path = &uart1;
 	};
 
-	memory {
+	memory@90000000 {
 		reg = <0x90000000 0x10000000>;
 	};
 

arch/arm/boot/dts/imx51-zii-rdu1.dts

@@ -51,6 +51,11 @@ chosen {
 		stdout-path = &uart1;
 	};
 
+	/* Will be filled by the bootloader */
+	memory@90000000 {
+		reg = <0x90000000 0>;
+	};
+
 	aliases {
 		mdio-gpio0 = &mdio_gpio;
 		rtc0 = &ds1341;
@@ -568,6 +573,15 @@ &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
+
+	rave-sp {
+		compatible = "zii,rave-sp-rdu1";
+		current-speed = <38400>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+	};
 };
 
 &usbh1 {

arch/arm/boot/dts/imx51.dtsi

@@ -26,7 +26,7 @@ / {
 	 * Also for U-Boot there must be a pre-existing /memory node.
 	 */
 	chosen {};
-	memory { device_type = "memory"; reg = <0 0>; };
+	memory { device_type = "memory"; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx53-ard.dts

@@ -17,7 +17,7 @@ / {
 	model = "Freescale i.MX53 Automotive Reference Design Board";
 	compatible = "fsl,imx53-ard", "fsl,imx53";
 
-	memory {
+	memory@70000000 {
 		reg = <0x70000000 0x40000000>;
 	};
 

arch/arm/boot/dts/imx53-cx9020.dts

@@ -21,7 +21,7 @@ chosen {
 		stdout-path = &uart2;
 	};
 
-	memory {
+	memory@70000000 {
 		reg = <0x70000000 0x20000000>,
 		      <0xb0000000 0x20000000>;
 	};

arch/arm/boot/dts/imx53-m53.dtsi

@@ -15,7 +15,7 @@ / {
 	model = "Aries/DENX M53";
 	compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53";
 
-	memory {
+	memory@70000000 {
 		reg = <0x70000000 0x20000000>,
 		      <0xb0000000 0x20000000>;
 	};

arch/arm/boot/dts/imx53-m53evk.dts

@@ -153,6 +153,7 @@ &i2c1 {
 	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_3p2v>;
 		VDDIO-supply = <&reg_3p2v>;
 		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;

arch/arm/boot/dts/imx53-ppd.dts

@@ -132,6 +132,14 @@ reg_usbh3_vbus: regulator-usbh3-vbus {
 		enable-active-high;
 	};
 
+	reg_tsiref: regulator-tsiref {
+		compatible = "regulator-fixed";
+		regulator-name = "tsiref";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
 	pwm_bl: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm2 0 50000>;
@@ -294,6 +302,8 @@ da9053@0 {
 		interrupt-parent = <&gpio3>;
 		interrupts = <12 0x8>;
 		spi-max-frequency = <1000000>;
+		dlg,tsi-as-adc;
+		tsiref-supply = <&reg_tsiref>;
 
 		regulators {
 			buck1_reg: buck1 {
@@ -436,6 +446,7 @@ i2c4: i2c@0 {
 			sgtl5000: codec@a {
 				compatible = "fsl,sgtl5000";
 				reg = <0xa>;
+				#sound-dai-cells = <0>;
 				VDDA-supply = <&reg_sgtl5k>;
 				VDDIO-supply = <&reg_sgtl5k>;
 				clocks = <&cko2_11M>;
@@ -525,6 +536,7 @@ &i2c2 {
 
 	touchscreen@4b {
 		compatible = "atmel,maxtouch";
+		reset-gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
 		reg = <0x4b>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <4 0x8>;

arch/arm/boot/dts/imx53-qsb-common.dtsi

@@ -17,7 +17,7 @@ chosen {
 		stdout-path = &uart1;
 	};
 
-	memory {
+	memory@70000000 {
 		reg = <0x70000000 0x20000000>,
 		      <0xb0000000 0x20000000>;
 	};
@@ -317,6 +317,7 @@ &i2c2 {
 	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_3p2v>;
 		VDDIO-supply = <&reg_3p2v>;
 		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;

arch/arm/boot/dts/imx53-smd.dts

@@ -17,7 +17,7 @@ / {
 	model = "Freescale i.MX53 Smart Mobile Reference Design Board";
 	compatible = "fsl,imx53-smd", "fsl,imx53";
 
-	memory {
+	memory@70000000 {
 		reg = <0x70000000 0x40000000>;
 	};
 

arch/arm/boot/dts/imx53-tqma53.dtsi

@@ -16,7 +16,7 @@ / {
 	model = "TQ TQMa53";
 	compatible = "tq,tqma53", "fsl,imx53";
 
-	memory {
+	memory@70000000 {
 		reg = <0x70000000 0x40000000>; /* Up to 1GiB */
 	};
 

arch/arm/boot/dts/imx53-tx53-x03x.dts

@@ -230,6 +230,7 @@ &i2c3 {
 	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_2v5>;
 		VDDIO-supply = <&reg_3v3>;
 		clocks = <&mclk>;

arch/arm/boot/dts/imx53-tx53-x13x.dts

@@ -131,6 +131,7 @@ &i2c3 {
 	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_2v5>;
 		VDDIO-supply = <&reg_3v3>;
 		clocks = <&mclk>;

arch/arm/boot/dts/imx53-tx53.dtsi

@@ -49,6 +49,11 @@ / {
 	model = "Ka-Ro electronics TX53 module";
 	compatible = "karo,tx53", "fsl,imx53";
 
+	/* Will be filled by the bootloader */
+	memory@70000000 {
+		reg = <0x70000000 0>;
+	};
+
 	aliases {
 		can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
 		can1 = &can1;

arch/arm/boot/dts/imx53-usbarmory.dts

@@ -57,7 +57,7 @@ chosen {
 		stdout-path = &uart1;
 	};
 
-	memory {
+	memory@70000000 {
 		reg = <0x70000000 0x20000000>;
 	};
 

arch/arm/boot/dts/imx53-voipac-bsb.dts

@@ -133,6 +133,7 @@ &i2c3 {
 	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
 		clocks = <&clks 150>;

arch/arm/boot/dts/imx53.dtsi

@@ -26,7 +26,7 @@ / {
 	 * Also for U-Boot there must be a pre-existing /memory node.
 	 */
 	chosen {};
-	memory { device_type = "memory"; reg = <0 0>; };
+	memory { device_type = "memory"; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx6dl-apf6dev.dts

@@ -54,7 +54,7 @@ / {
 	model = "Armadeus APF6 Solo Module on APF6Dev Board";
 	compatible = "armadeus,imx6dl-apf6dev", "armadeus,imx6dl-apf6", "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x20000000>;
 	};
 };

arch/arm/boot/dts/imx6dl-aristainetos2_4.dts

@@ -48,7 +48,7 @@ / {
 	model = "aristainetos2 i.MX6 Dual Lite Board 4";
 	compatible = "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x40000000>;
 	};
 

arch/arm/boot/dts/imx6dl-aristainetos2_7.dts

@@ -48,7 +48,7 @@ / {
 	model = "aristainetos2 i.MX6 Dual Lite Board 7";
 	compatible = "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x40000000>;
 	};
 

arch/arm/boot/dts/imx6dl-aristainetos_4.dts

@@ -27,7 +27,7 @@ backlight {
 		status = "okay";
 	};
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x40000000>;
 	};
 

arch/arm/boot/dts/imx6dl-aristainetos_7.dts

@@ -16,7 +16,7 @@ / {
 	model = "aristainetos i.MX6 Dual Lite Board 7";
 	compatible = "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x40000000>;
 	};
 

arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts

@@ -53,6 +53,11 @@ / {
 	compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl",
 		     "fsl,imx6dl";
 
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		reg = <0x10000000 0>;
+	};
+
 	aliases {
 		i2c0 = &i2c2;
 		i2c1 = &i2c3;
@@ -63,6 +68,10 @@ aliases {
 		rtc1 = &snvs_rtc;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	clocks {
 		/* Fixed crystal dedicated to mcp251x */
 		clk16m: clk@1 {

arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts

@@ -20,4 +20,9 @@
 / {
 	model = "DFI FS700-M60-6DL i.MX6dl Q7 Board";
 	compatible = "dfi,fs700-m60-6dl", "dfi,fs700e-m60", "fsl,imx6dl";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		reg = <0x10000000 0>;
+	};
 };

arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board with NAND";
+	compatible = "phytec,imx6dl-pbac06-nand", "phytec,imx6dl-pbac06",
+		     "phytec,imx6qdl-pcm058", "fsl,imx6dl";
+
+	chosen {
+		linux,stdout-path = &uart2;
+	};
+};
+
+&ethphy {
+	max-speed = <100>;
+};
+
+&fec {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};

arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi

@@ -16,7 +16,7 @@ / {
 	model = "Phytec phyFLEX-i.MX6 DualLite/Solo";
 	compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x20000000>;
 	};
 };

arch/arm/boot/dts/imx6dl-rex-basic.dts

@@ -16,7 +16,7 @@ / {
 	model = "Rex Basic i.MX6 Dual Lite Board";
 	compatible = "rex,imx6dl-rex-basic", "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x20000000>;
 	};
 };

arch/arm/boot/dts/imx6dl-riotboard.dts

@@ -15,7 +15,7 @@ / {
 	model = "RIoTboard i.MX6S";
 	compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x40000000>;
 	};
 

arch/arm/boot/dts/imx6dl-ts4900.dts

@@ -46,4 +46,9 @@
 / {
 	model = "Technologic Systems i.MX6 Solo/DualLite TS-4900 (Default Device Tree)";
 	compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		reg = <0x10000000 0>;
+	};
 };

arch/arm/boot/dts/imx6dl-ts7970.dts

@@ -47,4 +47,9 @@
 / {
 	model = "Technologic Systems i.MX6 Solo/DualLite TS-7970 (Default Device Tree)";
 	compatible = "technologic,imx6dl-ts7970", "fsl,imx6dl";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		reg = <0x10000000 0>;
+	};
 };

arch/arm/boot/dts/imx6dl-wandboard-revb1.dts

@@ -16,7 +16,7 @@ / {
 	model = "Wandboard i.MX6 Dual Lite Board rev B1";
 	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x40000000>;
 	};
 };

arch/arm/boot/dts/imx6dl-wandboard-revd1.dts

@@ -16,7 +16,7 @@ / {
 	model = "Wandboard i.MX6 Dual Lite Board revD1";
 	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x40000000>;
 	};
 };

arch/arm/boot/dts/imx6dl-wandboard.dts

@@ -16,7 +16,7 @@ / {
 	model = "Wandboard i.MX6 Dual Lite Board";
 	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x40000000>;
 	};
 };

arch/arm/boot/dts/imx6dl.dtsi

@@ -80,11 +80,6 @@ epdc: epdc@20f4000 {
 				reg = <0x020f4000 0x4000>;
 				interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
 			};
-
-			lcdif: lcdif@20f8000 {
-				reg = <0x020f8000 0x4000>;
-				interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
-			};
 		};
 
 		aips2: aips-bus@2100000 {
@@ -109,11 +104,6 @@ display-subsystem {
 		compatible = "fsl,imx-display-subsystem";
 		ports = <&ipu1_di0>, <&ipu1_di1>;
 	};
-
-	gpu-subsystem {
-		compatible = "fsl,imx-gpu-subsystem";
-		cores = <&gpu_2d>, <&gpu_3d>;
-	};
 };
 
 &gpio1 {

arch/arm/boot/dts/imx6q-apf6dev.dts

@@ -54,7 +54,7 @@ / {
 	model = "Armadeus APF6 Quad / Dual Module on APF6Dev Board";
 	compatible = "armadeus,imx6q-apf6dev", "armadeus,imx6q-apf6", "fsl,imx6q";
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x40000000>;
 	};
 };

arch/arm/boot/dts/imx6q-arm2.dts

@@ -18,7 +18,7 @@ / {
 	model = "Freescale i.MX6 Quad Armadillo2 Board";
 	compatible = "fsl,imx6q-arm2", "fsl,imx6q";
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x80000000>;
 	};
 

arch/arm/boot/dts/imx6q-ba16.dtsi

@@ -46,7 +46,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x40000000>;
 	};
 

arch/arm/boot/dts/imx6q-bx50v3.dtsi

@@ -353,6 +353,14 @@ MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0
 	};
 };
 
+&pmu {
+	secure-reg-access;
+};
+
+&usdhc2 {
+	status = "disabled";
+};
+
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;

arch/arm/boot/dts/imx6q-cm-fx6.dts

@@ -50,7 +50,7 @@ / {
 	model = "CompuLab CM-FX6";
 	compatible = "compulab,cm-fx6", "fsl,imx6q";
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x80000000>;
 	};
 

arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts

@@ -20,4 +20,9 @@
 / {
 	model = "DFI FS700-M60-6QD i.MX6qd Q7 Board";
 	compatible = "dfi,fs700-m60-6qd", "dfi,fs700e-m60", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		reg = <0x10000000 0>;
+	};
 };

arch/arm/boot/dts/imx6q-display5.dtsi

@@ -47,7 +47,7 @@ / {
 	model = "Liebherr (LWN) display5 i.MX6 Quad Board";
 	compatible = "lwn,display5", "fsl,imx6q";
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x40000000>;
 	};
 

arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts

@@ -29,7 +29,7 @@ aliases {
 		stmpe-i2c1 = &stmpe2;
 	};
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x80000000>;
 	};
 

arch/arm/boot/dts/imx6q-dms-ba16.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q-ba16.dtsi"
+
+/ {
+	model = "Advantech DMS-BA16";
+	compatible = "advantech,imx6q-dms-ba16", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgvbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <22000000>;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ba16-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-ba16-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&ecspi5 {
+	cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5>;
+	status = "okay";
+
+	m25_eeprom: m25p80@0 {
+		compatible = "atmel,at25256B", "atmel,at25";
+		spi-max-frequency = <20000000>;
+		size = <0x8000>;
+		pagesize = <64>;
+		reg = <0>;
+		address-width = <16>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26        0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27        0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03   0x1b0b0
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06   0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotgvbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&sys_mclk>;
+		lrclk-strength = <0x3>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&sata {
+	fsl,no-spread-spectrum;
+	fsl,transmit-atten-16ths = <12>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-level-mV = <1133>;
+	fsl,receive-dpll-mode = <1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};

arch/arm/boot/dts/imx6q-evi.dts

@@ -50,7 +50,7 @@ / {
 	model = "Uniwest Evi";
 	compatible = "uniwest,imx6q-evi", "fsl,imx6q";
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x40000000>;
 	};
 

arch/arm/boot/dts/imx6q-gk802.dts

@@ -18,7 +18,7 @@ chosen {
 		stdout-path = &uart4;
 	};
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x40000000>;
 	};
 

arch/arm/boot/dts/imx6q-gw5400-a.dts

@@ -60,7 +60,7 @@ led2: user3 {
 		};
 	};
 
-	memory {
+	memory@10000000 {
 		reg = <0x10000000 0x40000000>;
 	};