Commit 7adae489 authored by Greg Banks's avatar Greg Banks Committed by Linus Torvalds

[PATCH] knfsd: Prepare knfsd for support of rsize/wsize of up to 1MB, over TCP

The limit over UDP remains at 32K.  Also, make some of the apparently
arbitrary sizing constants clearer.

The biggest change here involves replacing NFSSVC_MAXBLKSIZE by a function of
the rqstp.  This allows it to be different for different protocols (udp/tcp)
and also allows it to depend on the servers declared sv_bufsiz.

Note that we don't actually increase sv_bufsz for nfs yet.  That comes next.
Signed-off-by: default avatarGreg Banks <gnb@melbourne.sgi.com>
Signed-off-by: default avatarNeil Brown <neilb@suse.de>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 3cc03b16
......@@ -160,6 +160,7 @@ nfsd3_proc_read(struct svc_rqst *rqstp, struct nfsd3_readargs *argp,
struct nfsd3_readres *resp)
{
int nfserr;
u32 max_blocksize = svc_max_payload(rqstp);
dprintk("nfsd: READ(3) %s %lu bytes at %lu\n",
SVCFH_fmt(&argp->fh),
......@@ -172,8 +173,8 @@ nfsd3_proc_read(struct svc_rqst *rqstp, struct nfsd3_readargs *argp,
*/
resp->count = argp->count;
if (NFSSVC_MAXBLKSIZE < resp->count)
resp->count = NFSSVC_MAXBLKSIZE;
if (max_blocksize < resp->count)
resp->count = max_blocksize;
svc_reserve(rqstp, ((1 + NFS3_POST_OP_ATTR_WORDS + 3)<<2) + resp->count +4);
......@@ -538,15 +539,16 @@ nfsd3_proc_fsinfo(struct svc_rqst * rqstp, struct nfsd_fhandle *argp,
struct nfsd3_fsinfores *resp)
{
int nfserr;
u32 max_blocksize = svc_max_payload(rqstp);
dprintk("nfsd: FSINFO(3) %s\n",
SVCFH_fmt(&argp->fh));
resp->f_rtmax = NFSSVC_MAXBLKSIZE;
resp->f_rtpref = NFSSVC_MAXBLKSIZE;
resp->f_rtmax = max_blocksize;
resp->f_rtpref = max_blocksize;
resp->f_rtmult = PAGE_SIZE;
resp->f_wtmax = NFSSVC_MAXBLKSIZE;
resp->f_wtpref = NFSSVC_MAXBLKSIZE;
resp->f_wtmax = max_blocksize;
resp->f_wtpref = max_blocksize;
resp->f_wtmult = PAGE_SIZE;
resp->f_dtpref = PAGE_SIZE;
resp->f_maxfilesize = ~(u32) 0;
......
......@@ -330,6 +330,7 @@ nfs3svc_decode_readargs(struct svc_rqst *rqstp, u32 *p,
{
unsigned int len;
int v,pn;
u32 max_blocksize = svc_max_payload(rqstp);
if (!(p = decode_fh(p, &args->fh))
|| !(p = xdr_decode_hyper(p, &args->offset)))
......@@ -337,8 +338,8 @@ nfs3svc_decode_readargs(struct svc_rqst *rqstp, u32 *p,
len = args->count = ntohl(*p++);
if (len > NFSSVC_MAXBLKSIZE)
len = NFSSVC_MAXBLKSIZE;
if (len > max_blocksize)
len = max_blocksize;
/* set up the kvec */
v=0;
......@@ -358,6 +359,7 @@ nfs3svc_decode_writeargs(struct svc_rqst *rqstp, u32 *p,
struct nfsd3_writeargs *args)
{
unsigned int len, v, hdr;
u32 max_blocksize = svc_max_payload(rqstp);
if (!(p = decode_fh(p, &args->fh))
|| !(p = xdr_decode_hyper(p, &args->offset)))
......@@ -375,8 +377,8 @@ nfs3svc_decode_writeargs(struct svc_rqst *rqstp, u32 *p,
rqstp->rq_vec[0].iov_base = (void*)p;
rqstp->rq_vec[0].iov_len = rqstp->rq_arg.head[0].iov_len - hdr;
if (len > NFSSVC_MAXBLKSIZE)
len = NFSSVC_MAXBLKSIZE;
if (len > max_blocksize)
len = max_blocksize;
v= 0;
while (len > rqstp->rq_vec[v].iov_len) {
len -= rqstp->rq_vec[v].iov_len;
......@@ -564,6 +566,7 @@ nfs3svc_decode_readdirplusargs(struct svc_rqst *rqstp, u32 *p,
struct nfsd3_readdirargs *args)
{
int len, pn;
u32 max_blocksize = svc_max_payload(rqstp);
if (!(p = decode_fh(p, &args->fh)))
return 0;
......@@ -572,7 +575,7 @@ nfs3svc_decode_readdirplusargs(struct svc_rqst *rqstp, u32 *p,
args->dircount = ntohl(*p++);
args->count = ntohl(*p++);
len = (args->count > NFSSVC_MAXBLKSIZE) ? NFSSVC_MAXBLKSIZE :
len = (args->count > max_blocksize) ? max_blocksize :
args->count;
args->count = len;
......
......@@ -1536,12 +1536,12 @@ nfsd4_encode_fattr(struct svc_fh *fhp, struct svc_export *exp,
if (bmval0 & FATTR4_WORD0_MAXREAD) {
if ((buflen -= 8) < 0)
goto out_resource;
WRITE64((u64) NFSSVC_MAXBLKSIZE);
WRITE64((u64) svc_max_payload(rqstp));
}
if (bmval0 & FATTR4_WORD0_MAXWRITE) {
if ((buflen -= 8) < 0)
goto out_resource;
WRITE64((u64) NFSSVC_MAXBLKSIZE);
WRITE64((u64) svc_max_payload(rqstp));
}
if (bmval1 & FATTR4_WORD1_MODE) {
if ((buflen -= 4) < 0)
......@@ -2055,7 +2055,7 @@ nfsd4_encode_read(struct nfsd4_compoundres *resp, int nfserr,
RESERVE_SPACE(8); /* eof flag and byte count */
maxcount = NFSSVC_MAXBLKSIZE;
maxcount = svc_max_payload(resp->rqstp);
if (maxcount > read->rd_length)
maxcount = read->rd_length;
......
......@@ -146,13 +146,13 @@ nfsd_proc_read(struct svc_rqst *rqstp, struct nfsd_readargs *argp,
* status, 17 words for fattr, and 1 word for the byte count.
*/
if (NFSSVC_MAXBLKSIZE < argp->count) {
if (NFSSVC_MAXBLKSIZE_V2 < argp->count) {
printk(KERN_NOTICE
"oversized read request from %u.%u.%u.%u:%d (%d bytes)\n",
NIPQUAD(rqstp->rq_addr.sin_addr.s_addr),
ntohs(rqstp->rq_addr.sin_port),
argp->count);
argp->count = NFSSVC_MAXBLKSIZE;
argp->count = NFSSVC_MAXBLKSIZE_V2;
}
svc_reserve(rqstp, (19<<2) + argp->count + 4);
......@@ -553,7 +553,7 @@ static struct svc_procedure nfsd_procedures2[18] = {
PROC(none, void, void, none, RC_NOCACHE, ST),
PROC(lookup, diropargs, diropres, fhandle, RC_NOCACHE, ST+FH+AT),
PROC(readlink, readlinkargs, readlinkres, none, RC_NOCACHE, ST+1+NFS_MAXPATHLEN/4),
PROC(read, readargs, readres, fhandle, RC_NOCACHE, ST+AT+1+NFSSVC_MAXBLKSIZE/4),
PROC(read, readargs, readres, fhandle, RC_NOCACHE, ST+AT+1+NFSSVC_MAXBLKSIZE_V2/4),
PROC(none, void, void, none, RC_NOCACHE, ST),
PROC(write, writeargs, attrstat, fhandle, RC_REPLBUFF, ST+AT),
PROC(create, createargs, diropres, fhandle, RC_REPLBUFF, ST+FH+AT),
......
......@@ -254,8 +254,8 @@ nfssvc_decode_readargs(struct svc_rqst *rqstp, u32 *p,
len = args->count = ntohl(*p++);
p++; /* totalcount - unused */
if (len > NFSSVC_MAXBLKSIZE)
len = NFSSVC_MAXBLKSIZE;
if (len > NFSSVC_MAXBLKSIZE_V2)
len = NFSSVC_MAXBLKSIZE_V2;
/* set up somewhere to store response.
* We take pages, put them on reslist and include in iovec
......@@ -288,8 +288,8 @@ nfssvc_decode_writeargs(struct svc_rqst *rqstp, u32 *p,
rqstp->rq_vec[0].iov_base = (void*)p;
rqstp->rq_vec[0].iov_len = rqstp->rq_arg.head[0].iov_len -
(((void*)p) - rqstp->rq_arg.head[0].iov_base);
if (len > NFSSVC_MAXBLKSIZE)
len = NFSSVC_MAXBLKSIZE;
if (len > NFSSVC_MAXBLKSIZE_V2)
len = NFSSVC_MAXBLKSIZE_V2;
v = 0;
while (len > rqstp->rq_vec[v].iov_len) {
len -= rqstp->rq_vec[v].iov_len;
......@@ -458,7 +458,7 @@ nfssvc_encode_statfsres(struct svc_rqst *rqstp, u32 *p,
{
struct kstatfs *stat = &resp->stats;
*p++ = htonl(NFSSVC_MAXBLKSIZE); /* max transfer size */
*p++ = htonl(NFSSVC_MAXBLKSIZE_V2); /* max transfer size */
*p++ = htonl(stat->f_bsize);
*p++ = htonl(stat->f_blocks);
*p++ = htonl(stat->f_bfree);
......
......@@ -13,6 +13,7 @@
#include <linux/nfs2.h>
#include <linux/nfs3.h>
#include <linux/nfs4.h>
#include <linux/sunrpc/msg_prot.h>
/*
* Maximum protocol version supported by knfsd
......@@ -23,6 +24,8 @@
* Maximum blocksize supported by daemon currently at 32K
*/
#define NFSSVC_MAXBLKSIZE (32*1024)
/* NFSv2 is limited by the protocol specification, see RFC 1094 */
#define NFSSVC_MAXBLKSIZE_V2 (8*1024)
#ifdef __KERNEL__
......@@ -30,7 +33,17 @@
# define NFS_SUPER_MAGIC 0x6969
#endif
#define NFSD_BUFSIZE (1024 + NFSSVC_MAXBLKSIZE)
/*
* Largest number of bytes we need to allocate for an NFS
* call or reply. Used to control buffer sizes. We use
* the length of v3 WRITE, READDIR and READDIR replies
* which are an RPC header, up to 26 XDR units of reply
* data, and some page data.
*
* Note that accuracy here doesn't matter too much as the
* size is rounded up to a page size when allocating space.
*/
#define NFSD_BUFSIZE ((RPC_MAX_HEADER_WITH_AUTH+26)*XDR_UNIT + NFSSVC_MAXBLKSIZE)
#ifdef CONFIG_NFSD_V4
# define NFSSVC_XDRSIZE NFS4_SVC_XDRSIZE
......
......@@ -20,9 +20,6 @@
/* size of the nodename buffer */
#define UNX_MAXNODENAME 32
/* Maximum size (in bytes) of an rpc credential or verifier */
#define RPC_MAX_AUTH_SIZE (400)
/* Work around the lack of a VFS credential */
struct auth_cred {
uid_t uid;
......
......@@ -11,6 +11,9 @@
#define RPC_VERSION 2
/* size of an XDR encoding unit in bytes, i.e. 32bit */
#define XDR_UNIT (4)
/* spec defines authentication flavor as an unsigned 32 bit integer */
typedef u32 rpc_authflavor_t;
......@@ -34,6 +37,9 @@ enum rpc_auth_flavors {
RPC_AUTH_GSS_SPKMP = 390011,
};
/* Maximum size (in bytes) of an rpc credential or verifier */
#define RPC_MAX_AUTH_SIZE (400)
enum rpc_msg_type {
RPC_CALL = 0,
RPC_REPLY = 1
......@@ -101,5 +107,39 @@ typedef __be32 rpc_fraghdr;
#define RPC_FRAGMENT_SIZE_MASK (~RPC_LAST_STREAM_FRAGMENT)
#define RPC_MAX_FRAGMENT_SIZE ((1U << 31) - 1)
/*
* RPC call and reply header size as number of 32bit words (verifier
* size computed separately, see below)
*/
#define RPC_CALLHDRSIZE (6)
#define RPC_REPHDRSIZE (4)
/*
* Maximum RPC header size, including authentication,
* as number of 32bit words (see RFCs 1831, 1832).
*
* xid 1 xdr unit = 4 bytes
* mtype 1
* rpc_version 1
* program 1
* prog_version 1
* procedure 1
* cred {
* flavor 1
* length 1
* body<RPC_MAX_AUTH_SIZE> 100 xdr units = 400 bytes
* }
* verf {
* flavor 1
* length 1
* body<RPC_MAX_AUTH_SIZE> 100 xdr units = 400 bytes
* }
* TOTAL 210 xdr units = 840 bytes
*/
#define RPC_MAX_HEADER_WITH_AUTH \
(RPC_CALLHDRSIZE + 2*(2+RPC_MAX_AUTH_SIZE/4))
#endif /* __KERNEL__ */
#endif /* _LINUX_SUNRPC_MSGPROT_H_ */
......@@ -13,6 +13,7 @@
#include <linux/in.h>
#include <linux/sunrpc/types.h>
#include <linux/sunrpc/xdr.h>
#include <linux/sunrpc/auth.h>
#include <linux/sunrpc/svcauth.h>
#include <linux/wait.h>
#include <linux/mm.h>
......@@ -95,8 +96,28 @@ static inline void svc_get(struct svc_serv *serv)
* Maximum payload size supported by a kernel RPC server.
* This is use to determine the max number of pages nfsd is
* willing to return in a single READ operation.
*
* These happen to all be powers of 2, which is not strictly
* necessary but helps enforce the real limitation, which is
* that they should be multiples of PAGE_CACHE_SIZE.
*
* For UDP transports, a block plus NFS,RPC, and UDP headers
* has to fit into the IP datagram limit of 64K. The largest
* feasible number for all known page sizes is probably 48K,
* but we choose 32K here. This is the same as the historical
* Linux limit; someone who cares more about NFS/UDP performance
* can test a larger number.
*
* For TCP transports we have more freedom. A size of 1MB is
* chosen to match the client limit. Other OSes are known to
* have larger limits, but those numbers are probably beyond
* the point of diminishing returns.
*/
#define RPCSVC_MAXPAYLOAD (64*1024u)
#define RPCSVC_MAXPAYLOAD (1*1024*1024u)
#define RPCSVC_MAXPAYLOAD_TCP RPCSVC_MAXPAYLOAD
#define RPCSVC_MAXPAYLOAD_UDP (32*1024u)
extern u32 svc_max_payload(const struct svc_rqst *rqstp);
/*
* RPC Requsts and replies are stored in one or more pages.
......
......@@ -15,6 +15,7 @@
#include <linux/kref.h>
#include <linux/sunrpc/sched.h>
#include <linux/sunrpc/xdr.h>
#include <linux/sunrpc/msg_prot.h>
extern unsigned int xprt_udp_slot_table_entries;
extern unsigned int xprt_tcp_slot_table_entries;
......@@ -23,13 +24,6 @@ extern unsigned int xprt_tcp_slot_table_entries;
#define RPC_DEF_SLOT_TABLE (16U)
#define RPC_MAX_SLOT_TABLE (128U)
/*
* RPC call and reply header size as number of 32bit words (verifier
* size computed separately)
*/
#define RPC_CALLHDRSIZE 6
#define RPC_REPHDRSIZE 4
/*
* Parameters for choosing a free port
*/
......
......@@ -919,3 +919,18 @@ svc_process(struct svc_rqst *rqstp)
svc_putnl(resv, ntohl(rpc_stat));
goto sendit;
}
/*
* Return (transport-specific) limit on the rpc payload.
*/
u32 svc_max_payload(const struct svc_rqst *rqstp)
{
int max = RPCSVC_MAXPAYLOAD_TCP;
if (rqstp->rq_sock->sk_sock->type == SOCK_DGRAM)
max = RPCSVC_MAXPAYLOAD_UDP;
if (rqstp->rq_server->sv_bufsz < max)
max = rqstp->rq_server->sv_bufsz;
return max;
}
EXPORT_SYMBOL_GPL(svc_max_payload);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment