Merge tag 'ux500-gpio-pins-for-3.5' of...

Merge tag 'ux500-gpio-pins-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/pinctrl

ux500 GPIO and pinctrl changes for kernel 3.5

* tag 'ux500-gpio-pins-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: switch MSP to using pinctrl for pins
  ARM: ux500: alter MSP registration to return a device pointer
  ARM: ux500: switch to using pinctrl for uart0
  ARM: ux500: delete custom pin control system
  ARM: ux500: switch over to Nomadik pinctrl driver
  pinctrl: add sleep state definition
  pinctrl/nomadik: implement pin configuration
  pinctrl/nomadik: implement pin multiplexing
  pinctrl/nomadik: reuse GPIO debug function for pins
  pinctrl/nomadik: break out single GPIO debug function
  pinctrl/nomadik: basic Nomadik pinctrl interface
  pinctrl/nomadik: !CONFIG_OF build error
  gpio: move the Nomadik GPIO driver to pinctrl

Context conflicts resolved in drivers/pinctrl/Kconfig and
drivers/pinctrl/Makefile.
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/mach-ux500/Kconfig

@@ -9,6 +9,8 @@ config UX500_SOC_COMMON
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369
 	select CACHE_L2X0
+	select PINCTRL
+	select PINCTRL_NOMADIK
 
 config UX500_SOC_DB5500
 	bool
@@ -20,6 +22,7 @@ config UX500_SOC_DB8500
 	select REGULATOR
 	select REGULATOR_DB8500_PRCMU
 	select CPU_FREQ_TABLE if CPU_FREQ
+	select PINCTRL_DB8500
 
 menu "Ux500 target platform (boards)"
 

arch/arm/mach-ux500/Makefile

@@ -3,7 +3,7 @@
 #
 
 obj-y				:= clock.o cpu.o devices.o devices-common.o \
-				   id.o pins.o usb.o timer.o
+				   id.o usb.o timer.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
 obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o dma-db5500.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o

arch/arm/mach-ux500/board-mop500-msp.c

@@ -7,17 +7,18 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
-#include <plat/gpio-nomadik.h>
+#include <linux/pinctrl/consumer.h>
 
+#include <plat/gpio-nomadik.h>
 #include <plat/pincfg.h>
 #include <plat/ste_dma40.h>
 
 #include <mach/devices.h>
-#include <ste-dma40-db8500.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/msp.h>
 
+#include "ste-dma40-db8500.h"
 #include "board-mop500.h"
 #include "devices-db8500.h"
 #include "pins-db8500.h"
@@ -28,19 +29,10 @@ static DEFINE_SPINLOCK(msp_rxtx_lock);
 /* Reference Count */
 static int msp_rxtx_ref;
 
-static pin_cfg_t mop500_msp1_pins_init[] = {
-		GPIO33_MSP1_TXD | PIN_OUTPUT_LOW   | PIN_SLPM_WAKEUP_DISABLE,
-		GPIO34_MSP1_TFS | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_DISABLE,
-		GPIO35_MSP1_TCK | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_DISABLE,
-		GPIO36_MSP1_RXD | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_DISABLE,
-};
-
-static pin_cfg_t mop500_msp1_pins_exit[] = {
-		GPIO33_MSP1_TXD | PIN_OUTPUT_LOW   | PIN_SLPM_WAKEUP_ENABLE,
-		GPIO34_MSP1_TFS | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_ENABLE,
-		GPIO35_MSP1_TCK | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_ENABLE,
-		GPIO36_MSP1_RXD | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_ENABLE,
-};
+/* Pin modes */
+struct pinctrl *msp1_p;
+struct pinctrl_state *msp1_def;
+struct pinctrl_state *msp1_sleep;
 
 int msp13_i2s_init(void)
 {
@@ -48,9 +40,11 @@ int msp13_i2s_init(void)
 	unsigned long flags;
 
 	spin_lock_irqsave(&msp_rxtx_lock, flags);
-	if (msp_rxtx_ref == 0)
-		retval = nmk_config_pins(
-				ARRAY_AND_SIZE(mop500_msp1_pins_init));
+	if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_def))) {
+		retval = pinctrl_select_state(msp1_p, msp1_def);
+		if (retval)
+			pr_err("could not set MSP1 defstate\n");
+	}
 	if (!retval)
 		msp_rxtx_ref++;
 	spin_unlock_irqrestore(&msp_rxtx_lock, flags);
@@ -66,9 +60,11 @@ int msp13_i2s_exit(void)
 	spin_lock_irqsave(&msp_rxtx_lock, flags);
 	WARN_ON(!msp_rxtx_ref);
 	msp_rxtx_ref--;
-	if (msp_rxtx_ref == 0)
-		retval = nmk_config_pins_sleep(
-				ARRAY_AND_SIZE(mop500_msp1_pins_exit));
+	if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_sleep))) {
+		retval = pinctrl_select_state(msp1_p, msp1_sleep);
+		if (retval)
+			pr_err("could not set MSP1 sleepstate\n");
+	}
 	spin_unlock_irqrestore(&msp_rxtx_lock, flags);
 
 	return retval;
@@ -170,7 +166,8 @@ static struct stedma40_chan_cfg msp2_dma_tx = {
 	/* data_width is set during configuration */
 };
 
-static int db8500_add_msp_i2s(struct device *parent, int id,
+static struct platform_device *db8500_add_msp_i2s(struct device *parent,
+			int id,
 			resource_size_t base, int irq,
 			struct msp_i2s_platform_data *pdata)
 {
@@ -188,10 +185,10 @@ static int db8500_add_msp_i2s(struct device *parent, int id,
 	if (!pdev) {
 		pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n",
 			id);
-		return -EIO;
+		return NULL;
 	}
 
-	return 0;
+	return pdev;
 }
 
 /* Platform device for ASoC U8500 machine */
@@ -228,23 +225,43 @@ static struct msp_i2s_platform_data msp3_platform_data = {
 
 int mop500_msp_init(struct device *parent)
 {
-	int ret;
+	struct platform_device *msp1;
 
 	pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__);
 	platform_device_register(&snd_soc_u8500);
 
 	pr_info("Initialize MSP I2S-devices.\n");
-	ret = db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
-				&msp0_platform_data);
-	ret |= db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
-				&msp1_platform_data);
-	ret |= db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
-				&msp2_platform_data);
-	ret |= db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
-				&msp3_platform_data);
+	db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
+			   &msp0_platform_data);
+	msp1 = db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
+			   &msp1_platform_data);
+	db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
+			   &msp2_platform_data);
+	db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
+			   &msp3_platform_data);
+
+	/* Get the pinctrl handle for MSP1 */
+	if (msp1) {
+		msp1_p = pinctrl_get(&msp1->dev);
+		if (IS_ERR(msp1_p))
+			dev_err(&msp1->dev, "could not get MSP1 pinctrl\n");
+		else {
+			msp1_def = pinctrl_lookup_state(msp1_p,
+							PINCTRL_STATE_DEFAULT);
+			if (IS_ERR(msp1_def)) {
+				dev_err(&msp1->dev,
+					"could not get MSP1 defstate\n");
+			}
+			msp1_sleep = pinctrl_lookup_state(msp1_p,
+							  PINCTRL_STATE_SLEEP);
+			if (IS_ERR(msp1_sleep))
+				dev_err(&msp1->dev,
+					"could not get MSP1 idlestate\n");
+		}
+	}
 
 	pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
 	platform_device_register(&ux500_pcm);
 
-	return ret;
+	return 0;
 }

arch/arm/mach-ux500/board-mop500.c

+
 /*
  * Copyright (C) 2008-2009 ST-Ericsson
  *
@@ -29,18 +30,17 @@
 #include <linux/smsc911x.h>
 #include <linux/gpio_keys.h>
 #include <linux/delay.h>
-
 #include <linux/of.h>
 #include <linux/of_platform.h>
-
 #include <linux/leds.h>
+#include <linux/pinctrl/consumer.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
 
 #include <plat/i2c.h>
 #include <plat/ste_dma40.h>
-#include <plat/pincfg.h>
 #include <plat/gpio-nomadik.h>
 
 #include <mach/hardware.h>
@@ -48,7 +48,6 @@
 #include <mach/devices.h>
 #include <mach/irqs.h>
 
-#include "pins-db8500.h"
 #include "ste-dma40-db8500.h"
 #include "devices-db8500.h"
 #include "board-mop500.h"
@@ -521,14 +520,6 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
 };
 #endif
 
-
-static pin_cfg_t mop500_pins_uart0[] = {
-	GPIO0_U0_CTSn   | PIN_INPUT_PULLUP,
-	GPIO1_U0_RTSn   | PIN_OUTPUT_HIGH,
-	GPIO2_U0_RXD    | PIN_INPUT_PULLUP,
-	GPIO3_U0_TXD    | PIN_OUTPUT_HIGH,
-};
-
 #define PRCC_K_SOFTRST_SET      0x18
 #define PRCC_K_SOFTRST_CLEAR    0x1C
 static void ux500_uart0_reset(void)
@@ -549,24 +540,33 @@ static void ux500_uart0_reset(void)
 	udelay(1);
 }
 
+/* This needs to be referenced by callbacks */
+struct pinctrl *u0_p;
+struct pinctrl_state *u0_def;
+struct pinctrl_state *u0_sleep;
+
 static void ux500_uart0_init(void)
 {
 	int ret;
 
-	ret = nmk_config_pins(mop500_pins_uart0,
-			ARRAY_SIZE(mop500_pins_uart0));
-	if (ret < 0)
-		pr_err("pl011: uart pins_enable failed\n");
+	if (IS_ERR(u0_p) || IS_ERR(u0_def))
+		return;
+
+	ret = pinctrl_select_state(u0_p, u0_def);
+	if (ret)
+		pr_err("could not set UART0 defstate\n");
 }
 
 static void ux500_uart0_exit(void)
 {
 	int ret;
 
-	ret = nmk_config_pins_sleep(mop500_pins_uart0,
-			ARRAY_SIZE(mop500_pins_uart0));
-	if (ret < 0)
-		pr_err("pl011: uart pins_disable failed\n");
+	if (IS_ERR(u0_p) || IS_ERR(u0_sleep))
+		return;
+
+	ret = pinctrl_select_state(u0_p, u0_sleep);
+	if (ret)
+		pr_err("could not set UART0 idlestate\n");
 }
 
 static struct amba_pl011_data uart0_plat = {
@@ -598,7 +598,28 @@ static struct amba_pl011_data uart2_plat = {
 
 static void __init mop500_uart_init(struct device *parent)
 {
-	db8500_add_uart0(parent, &uart0_plat);
+	struct amba_device *uart0_device;
+
+	uart0_device = db8500_add_uart0(parent, &uart0_plat);
+	if (uart0_device) {
+		u0_p = pinctrl_get(&uart0_device->dev);
+		if (IS_ERR(u0_p))
+			dev_err(&uart0_device->dev,
+				"could not get UART0 pinctrl\n");
+		else {
+			u0_def = pinctrl_lookup_state(u0_p,
+						      PINCTRL_STATE_DEFAULT);
+			if (IS_ERR(u0_def)) {
+				dev_err(&uart0_device->dev,
+					"could not get UART0 defstate\n");
+			}
+			u0_sleep = pinctrl_lookup_state(u0_p,
+							PINCTRL_STATE_SLEEP);
+			if (IS_ERR(u0_sleep))
+				dev_err(&uart0_device->dev,
+					"could not get UART0 idlestate\n");
+		}
+	}
 	db8500_add_uart1(parent, &uart1_plat);
 	db8500_add_uart2(parent, &uart2_plat);
 }
@@ -618,10 +639,9 @@ static void __init mop500_init_machine(void)
 
 	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
 
+	mop500_pinmaps_init();
 	parent = u8500_init_devices();
 
-	mop500_pins_init();
-
 	/* FIXME: parent of ab8500 should be prcmu */
 	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
 		mop500_platform_devs[i]->dev.parent = parent;
@@ -651,10 +671,9 @@ static void __init snowball_init_machine(void)
 	int i2c0_devs;
 	int i;
 
+	snowball_pinmaps_init();
 	parent = u8500_init_devices();
 
-	snowball_pins_init();
-
 	for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
 		snowball_platform_devs[i]->dev.parent = parent;
 
@@ -689,10 +708,9 @@ static void __init hrefv60_init_machine(void)
 	 */
 	mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
 
+	hrefv60_pinmaps_init();
 	parent = u8500_init_devices();
 
-	hrefv60_pins_init();
-
 	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
 		mop500_platform_devs[i]->dev.parent = parent;
 
@@ -781,6 +799,14 @@ static void __init u8500_init_machine(void)
 	int i2c0_devs;
 	int i;
 
+	/* Pinmaps must be in place before devices register */
+	if (of_machine_is_compatible("st-ericsson,mop500"))
+		mop500_pinmaps_init();
+	else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
+		snowball_pinmaps_init();
+	else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
+		hrefv60_pinmaps_init();
+
 	parent = u8500_init_devices();
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 
@@ -794,14 +820,12 @@ static void __init u8500_init_machine(void)
 
 	if (of_machine_is_compatible("st-ericsson,mop500")) {
 		mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
-		mop500_pins_init();
 
 		platform_add_devices(mop500_platform_devs,
 				ARRAY_SIZE(mop500_platform_devs));
 
 		mop500_sdi_init(parent);
 	} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
-		snowball_pins_init();
 		platform_add_devices(snowball_platform_devs,
 				ARRAY_SIZE(snowball_platform_devs));
 
@@ -814,7 +838,6 @@ static void __init u8500_init_machine(void)
 		 */
 		mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
 		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
-		hrefv60_pins_init();
 		platform_add_devices(mop500_platform_devs,
 				ARRAY_SIZE(mop500_platform_devs));
 

arch/arm/mach-ux500/board-mop500.h

@@ -85,9 +85,9 @@ extern void hrefv60_sdi_init(struct device *parent);
 extern void mop500_sdi_tc35892_init(struct device *parent);
 void __init mop500_u8500uib_init(void);
 void __init mop500_stuib_init(void);
-void __init mop500_pins_init(void);
-void __init hrefv60_pins_init(void);
-void __init snowball_pins_init(void);
+void __init mop500_pinmaps_init(void);
+void __init snowball_pinmaps_init(void);
+void __init hrefv60_pinmaps_init(void);
 
 void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
 		unsigned n);

arch/arm/mach-ux500/cpu-db8500.c

@@ -141,6 +141,7 @@ static void __init db8500_add_gpios(struct device *parent)
 
 	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
 			 IRQ_DB8500_GPIO0, &pdata);
+	dbx500_add_pinctrl(parent, "pinctrl-db8500");
 }
 
 static int usb_db8500_rx_dma_cfg[] = {

arch/arm/mach-ux500/devices-common.h

@@ -93,4 +93,16 @@ struct nmk_gpio_platform_data;
 void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
 		      int irq, struct nmk_gpio_platform_data *pdata);
 
+static inline void
+dbx500_add_pinctrl(struct device *parent, const char *name)
+{
+	struct platform_device_info pdevinfo = {
+		.parent = parent,
+		.name = name,
+		.id = -1,
+	};
+
+	platform_device_register_full(&pdevinfo);
+}
+
 #endif

arch/arm/mach-ux500/pins.c

-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
-#include <linux/err.h>
-#include <plat/pincfg.h>
-
-#include "pins.h"
-
-static LIST_HEAD(pin_lookups);
-static DEFINE_MUTEX(pin_lookups_mutex);
-static DEFINE_SPINLOCK(pins_lock);
-
-void __init ux500_pins_add(struct ux500_pin_lookup *pl, size_t num)
-{
-	mutex_lock(&pin_lookups_mutex);
-
-	while (num--) {
-		list_add_tail(&pl->node, &pin_lookups);
-		pl++;
-	}
-
-	mutex_unlock(&pin_lookups_mutex);
-}
-
-struct ux500_pins *ux500_pins_get(const char *name)
-{
-	struct ux500_pins *pins = NULL;
-	struct ux500_pin_lookup *pl;
-
-	mutex_lock(&pin_lookups_mutex);
-
-	list_for_each_entry(pl, &pin_lookups, node) {
-		if (!strcmp(pl->name, name)) {
-			pins = pl->pins;
-			goto out;
-		}
-	}
-
-out:
-	mutex_unlock(&pin_lookups_mutex);
-	return pins;
-}
-
-int ux500_pins_enable(struct ux500_pins *pins)
-{
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&pins_lock, flags);
-
-	if (pins->usage++ == 0)
-		ret = nmk_config_pins(pins->cfg, pins->num);
-
-	spin_unlock_irqrestore(&pins_lock, flags);
-	return ret;
-}
-
-int ux500_pins_disable(struct ux500_pins *pins)
-{
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&pins_lock, flags);
-
-	if (WARN_ON(pins->usage == 0))
-		goto out;
-
-	if (--pins->usage == 0)
-		ret = nmk_config_pins_sleep(pins->cfg, pins->num);
-
-out:
-	spin_unlock_irqrestore(&pins_lock, flags);
-	return ret;
-}
-
-void ux500_pins_put(struct ux500_pins *pins)
-{
-	WARN_ON(!pins);
-}

arch/arm/mach-ux500/pins.h

-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#ifndef __MACH_UX500_PINS_H
-#define __MACH_UX500_PINS_H
-
-#include <linux/list.h>
-#include <plat/pincfg.h>
-
-#define PIN_LOOKUP(_name, _pins)	\
-{					\
-	.name	= _name,		\
-	.pins	= _pins,		\
-}
-
-#define UX500_PINS(name, pins...)			\
-struct ux500_pins name = {				\
-	.cfg = (pin_cfg_t[]) {pins},			\
-	.num = ARRAY_SIZE(((pin_cfg_t[]) {pins})),	\
-}
-
-struct ux500_pins {
-	int usage;
-	int num;
-	pin_cfg_t *cfg;
-};
-
-struct ux500_pin_lookup {
-	struct list_head	node;
-	const char		*name;
-	struct ux500_pins	*pins;
-};
-
-void __init ux500_pins_add(struct ux500_pin_lookup *pl, size_t num);
-void __init ux500_offchip_gpio_init(struct ux500_pins *pins);
-struct ux500_pins *ux500_pins_get(const char *name);
-int ux500_pins_enable(struct ux500_pins *pins);
-int ux500_pins_disable(struct ux500_pins *pins);
-void ux500_pins_put(struct ux500_pins *pins);
-int pins_for_u9500(void);
-
-#endif

arch/arm/plat-nomadik/include/plat/pincfg.h

@@ -124,6 +124,19 @@ typedef unsigned long pin_cfg_t;
 #define PIN_LOWEMI_DISABLED	(0 << PIN_LOWEMI_SHIFT)
 #define PIN_LOWEMI_ENABLED	(1 << PIN_LOWEMI_SHIFT)
 
+#define PIN_GPIOMODE_SHIFT	26
+#define PIN_GPIOMODE_MASK	(0x1 << PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE(x)		(((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE_DISABLED	(0 << PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE_ENABLED	(1 << PIN_GPIOMODE_SHIFT)
+
+#define PIN_SLEEPMODE_SHIFT	27
+#define PIN_SLEEPMODE_MASK	(0x1 << PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE(x)	(((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE_DISABLED	(0 << PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE_ENABLED	(1 << PIN_SLEEPMODE_SHIFT)
+
+
 /* Shortcuts.  Use these instead of separate DIR, PULL, and VAL.  */
 #define PIN_INPUT_PULLDOWN	(PIN_DIR_INPUT | PIN_PULL_DOWN)
 #define PIN_INPUT_PULLUP	(PIN_DIR_INPUT | PIN_PULL_UP)

drivers/gpio/Makefile

@@ -36,7 +36,6 @@ obj-$(CONFIG_GPIO_MSM_V1)	+= gpio-msm-v1.o
 obj-$(CONFIG_GPIO_MSM_V2)	+= gpio-msm-v2.o
 obj-$(CONFIG_GPIO_MXC)		+= gpio-mxc.o
 obj-$(CONFIG_GPIO_MXS)		+= gpio-mxs.o
-obj-$(CONFIG_PLAT_NOMADIK)	+= gpio-nomadik.o
 obj-$(CONFIG_ARCH_OMAP)		+= gpio-omap.o
 obj-$(CONFIG_GPIO_PCA953X)	+= gpio-pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf857x.o

drivers/pinctrl/Kconfig

@@ -64,6 +64,16 @@ config PINCTRL_IMX28
 	select PINCONF
 	select PINCTRL_MXS
 
+config PINCTRL_NOMADIK
+	bool "Nomadik pin controller driver"
+	depends on ARCH_U8500
+	select PINMUX
+	select PINCONF
+
+config PINCTRL_DB8500
+	bool "DB8500 pin controller driver"
+	depends on PINCTRL_NOMADIK && ARCH_U8500
+
 config PINCTRL_PXA168
 	bool "PXA168 pin controller driver"
 	depends on ARCH_MMP

drivers/pinctrl/Makefile

@@ -16,6 +16,8 @@ obj-$(CONFIG_PINCTRL_MMP2)	+= pinctrl-mmp2.o
 obj-$(CONFIG_PINCTRL_MXS)	+= pinctrl-mxs.o
 obj-$(CONFIG_PINCTRL_IMX23)	+= pinctrl-imx23.o
 obj-$(CONFIG_PINCTRL_IMX28)	+= pinctrl-imx28.o
+obj-$(CONFIG_PINCTRL_NOMADIK)	+= pinctrl-nomadik.o
+obj-$(CONFIG_PINCTRL_DB8500)	+= pinctrl-nomadik-db8500.o
 obj-$(CONFIG_PINCTRL_PXA168)	+= pinctrl-pxa168.o
 obj-$(CONFIG_PINCTRL_PXA910)	+= pinctrl-pxa910.o
 obj-$(CONFIG_PINCTRL_SIRF)	+= pinctrl-sirf.o

drivers/pinctrl/pinctrl-nomadik.h

+#ifndef PINCTRL_PINCTRL_NOMADIK_H
+#define PINCTRL_PINCTRL_NOMADIK_H
+
+#include <plat/gpio-nomadik.h>
+
+/* Package definitions */
+#define PINCTRL_NMK_STN8815	0
+#define PINCTRL_NMK_DB8500	1
+
+/**
+ * struct nmk_function - Nomadik pinctrl mux function
+ * @name: The name of the function, exported to pinctrl core.
+ * @groups: An array of pin groups that may select this function.
+ * @ngroups: The number of entries in @groups.
+ */
+struct nmk_function {
+	const char *name;
+	const char * const *groups;
+	unsigned ngroups;
+};
+
+/**
+ * struct nmk_pingroup - describes a Nomadik pin group
+ * @name: the name of this specific pin group
+ * @pins: an array of discrete physical pins used in this group, taken
+ *	from the driver-local pin enumeration space
+ * @num_pins: the number of pins in this group array, i.e. the number of
+ *	elements in .pins so we can iterate over that array
+ * @altsetting: the altsetting to apply to all pins in this group to
+ *	configure them to be used by a function
+ */
+struct nmk_pingroup {
+	const char *name;
+	const unsigned int *pins;
+	const unsigned npins;
+	int altsetting;
+};
+
+/**
+ * struct nmk_pinctrl_soc_data - Nomadik pin controller per-SoC configuration
+ * @gpio_ranges: An array of GPIO ranges for this SoC
+ * @gpio_num_ranges: The number of GPIO ranges for this SoC
+ * @pins:	An array describing all pins the pin controller affects.
+ *		All pins which are also GPIOs must be listed first within the
+ *		array, and be numbered identically to the GPIO controller's
+ *		numbering.
+ * @npins:	The number of entries in @pins.
+ * @functions:	The functions supported on this SoC.
+ * @nfunction:	The number of entries in @functions.
+ * @groups:	An array describing all pin groups the pin SoC supports.
+ * @ngroups:	The number of entries in @groups.
+ */
+struct nmk_pinctrl_soc_data {
+	struct pinctrl_gpio_range *gpio_ranges;
+	unsigned gpio_num_ranges;
+	const struct pinctrl_pin_desc *pins;
+	unsigned npins;
+	const struct nmk_function *functions;
+	unsigned nfunctions;
+	const struct nmk_pingroup *groups;
+	unsigned ngroups;
+};
+
+#ifdef CONFIG_PINCTRL_DB8500
+
+void nmk_pinctrl_db8500_init(const struct nmk_pinctrl_soc_data **soc);
+
+#else
+
+static inline void
+nmk_pinctrl_db8500_init(const struct nmk_pinctrl_soc_data **soc)
+{
+}
+
+#endif
+
+#endif /* PINCTRL_PINCTRL_NOMADIK_H */

include/linux/pinctrl/pinctrl-state.h

@@ -2,5 +2,18 @@
  * Standard pin control state definitions
  */
 
+/**
+ * @PINCTRL_STATE_DEFAULT: the state the pinctrl handle shall be put
+ *	into as default, usually this means the pins are up and ready to
+ *	be used by the device driver. This state is commonly used by
+ *	hogs to configure muxing and pins at boot.
+ * @PINCTRL_STATE_IDLE: the state the pinctrl handle shall be put into
+ *	when the pins are idle. Could typically be set from a
+ *	pm_runtime_suspend() operation.
+ * @PINCTRL_STATE_SLEEP: the state the pinctrl handle shall be put into
+ *	when the pins are sleeping. Could typically be set from a
+ *	common suspend() function.
+ */
 #define PINCTRL_STATE_DEFAULT "default"
 #define PINCTRL_STATE_IDLE "idle"
+#define PINCTRL_STATE_SLEEP "sleep"