Commit 7bd0573b authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: pcl711: use 8253.h helper to set the timers

To better document the code, use the i8254_load() helper to set the
timers instead of doing the outb() instructions.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 98c6ccd0
......@@ -65,10 +65,7 @@ supported.
/*
* I/O port register map
*/
#define PCL711_CTR0 0x00
#define PCL711_CTR1 0x01
#define PCL711_CTR2 0x02
#define PCL711_CTRCTL 0x03
#define PCL711_TIMER_BASE 0x00
#define PCL711_AI_LSB_REG 0x04
#define PCL711_AI_MSB_REG 0x05
#define PCL711_AI_MSB_DRDY (1 << 4)
......@@ -380,27 +377,15 @@ static int pcl711_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
pcl711_set_changain(dev, s, cmd->chanlist[0]);
if (cmd->scan_begin_src == TRIG_TIMER) {
/*
* Set timers
* timer chip is an 8253, with timers 1 and 2
* cascaded
* 0x74 = Select Counter 1 | LSB/MSB | Mode=2 | Binary
* Mode 2 = Rate generator
*
* 0xb4 = Select Counter 2 | LSB/MSB | Mode=2 | Binary
*/
timer1 = timer2 = 0;
i8253_cascade_ns_to_timer(i8253_osc_base, &timer1, &timer2,
&cmd->scan_begin_arg,
TRIG_ROUND_NEAREST);
outb(0x74, dev->iobase + PCL711_CTRCTL);
outb(timer1 & 0xff, dev->iobase + PCL711_CTR1);
outb((timer1 >> 8) & 0xff, dev->iobase + PCL711_CTR1);
outb(0xb4, dev->iobase + PCL711_CTRCTL);
outb(timer2 & 0xff, dev->iobase + PCL711_CTR2);
outb((timer2 >> 8) & 0xff, dev->iobase + PCL711_CTR2);
i8254_load(dev->iobase + PCL711_TIMER_BASE, 0,
1, timer1, I8254_MODE2 | I8254_BINARY);
i8254_load(dev->iobase + PCL711_TIMER_BASE, 0,
2, timer2, I8254_MODE2 | I8254_BINARY);
/* clear pending interrupts (just in case) */
outb(0, dev->iobase + PCL711_CLRINTR);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment