Commit 7cd14636 authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller

net: mv643xx_eth: use phy_init_hw to reset PHY

Instead of open-coding a PHY reset through the MII BMCR register, use
phy_init_hw() which does that for us and will also make sure that PHY
fixups are applied if required. We also remove a call to phy_reset()
due to the following sequence of calls in the driver:

phy_scan()
	-> phy_connect()
		-> phy_connect_direct()
			-> phy_attach_direct()
				-> phy_init_hw()

and we only have a call to phy_init() after phy_scan().
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Tested-by: default avatarSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 87aa9f9c
......@@ -2066,23 +2066,6 @@ static inline void oom_timer_wrapper(unsigned long data)
napi_schedule(&mp->napi);
}
static void phy_reset(struct mv643xx_eth_private *mp)
{
int data;
data = phy_read(mp->phy, MII_BMCR);
if (data < 0)
return;
data |= BMCR_RESET;
if (phy_write(mp->phy, MII_BMCR, data) < 0)
return;
do {
data = phy_read(mp->phy, MII_BMCR);
} while (data >= 0 && data & BMCR_RESET);
}
static void port_start(struct mv643xx_eth_private *mp)
{
u32 pscr;
......@@ -2095,7 +2078,7 @@ static void port_start(struct mv643xx_eth_private *mp)
struct ethtool_cmd cmd;
mv643xx_eth_get_settings(mp->dev, &cmd);
phy_reset(mp);
phy_init_hw(mp->phy);
mv643xx_eth_set_settings(mp->dev, &cmd);
}
......@@ -2763,8 +2746,6 @@ static void phy_init(struct mv643xx_eth_private *mp, int speed, int duplex)
{
struct phy_device *phy = mp->phy;
phy_reset(mp);
if (speed == 0) {
phy->autoneg = AUTONEG_ENABLE;
phy->speed = 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment