Commit 7d034c5c authored by Sébastien Szymanski's avatar Sébastien Szymanski Committed by Shawn Guo

ARM: dts: imx6ull: add operating points

i.MX6ULL has different operating ranges than i.MX6UL so add the
operating points for the i.MX6ULL and remove them from board device
trees. A 25mV offset is added to the minimum allowed values like for the
i.MX6UL.
The valid frequencies are now selected by the cpufreq driver according
to ratings stored in fuses since commit 0aa9abd4 ("cpufreq: imx6q:
check speed grades for i.MX6ULL")
Signed-off-by: default avatarSébastien Szymanski <sebastien.szymanski@armadeus.com>
Acked-by: default avatarViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 5128666b
...@@ -20,20 +20,6 @@ wifi_pwrseq: sdio-pwrseq { ...@@ -20,20 +20,6 @@ wifi_pwrseq: sdio-pwrseq {
&cpu0 { &cpu0 {
clock-frequency = <792000000>; clock-frequency = <792000000>;
operating-points = <
/* kHz uV */
792000 1225000
528000 1175000
396000 1025000
198000 950000
>;
fsl,soc-operating-points = <
/* KHz uV */
792000 1175000
528000 1175000
396000 1175000
198000 1175000
>;
}; };
&iomuxc { &iomuxc {
......
...@@ -11,6 +11,25 @@ ...@@ -11,6 +11,25 @@
/* Delete CAAM node in AIPS-2 (i.MX6UL specific) */ /* Delete CAAM node in AIPS-2 (i.MX6UL specific) */
/delete-node/ &crypto; /delete-node/ &crypto;
&cpu0 {
operating-points = <
/* kHz uV */
900000 1275000
792000 1225000
528000 1175000
396000 1025000
198000 950000
>;
fsl,soc-operating-points = <
/* KHz uV */
900000 1175000
792000 1175000
528000 1175000
396000 1175000
198000 1175000
>;
};
/ { / {
soc { soc {
aips3: aips-bus@2200000 { aips3: aips-bus@2200000 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment