Commit 7d708033 authored by James Smart's avatar James Smart Committed by Martin K. Petersen

scsi: lpfc: Finalize Kconfig options for nvme

Reviewing the result of what was just added for Kconfig, we made a poor
choice. It worked well for full kernel builds, but not so much for how
it would be deployed on a distro.

Here's the final result:
- lpfc will compile in NVME initiator and/or NVME target support based
  on whether the kernel has the corresponding subsystem support.
  Kconfig is not used to drive this specifically for lpfc.
- There is a module parameter, lpfc_enable_fc4_type, that indicates
  whether the ports will do FCP-only or FCP & NVME (NVME-only not yet
  possible due to dependency on fc transport). As FCP & NVME divvys up
  exchange resources, and given NVME will not be often initially, the
  default is changed to FCP only.
Signed-off-by: default avatarDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: default avatarJames Smart <james.smart@broadcom.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 949d7fa1
......@@ -1253,20 +1253,6 @@ config SCSI_LPFC_DEBUG_FS
This makes debugging information from the lpfc driver
available via the debugfs filesystem.
config LPFC_NVME_INITIATOR
bool "Emulex LightPulse Fibre Channel NVME Initiator Support"
depends on SCSI_LPFC && NVME_FC
---help---
This enables NVME Initiator support in the Emulex lpfc driver.
config LPFC_NVME_TARGET
bool "Emulex LightPulse Fibre Channel NVME Initiator Support"
depends on SCSI_LPFC && NVME_TARGET_FC
---help---
This enables NVME Target support in the Emulex lpfc driver.
Target enablement must still be enabled on a per adapter
basis by module parameters.
config SCSI_SIM710
tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
depends on (EISA || MCA) && SCSI
......
......@@ -3315,9 +3315,9 @@ LPFC_ATTR_R(nvmet_mrq_post, LPFC_DEF_MRQ_POST,
* lpfc_enable_fc4_type: Defines what FC4 types are supported.
* Supported Values: 1 - register just FCP
* 3 - register both FCP and NVME
* Supported values are [1,3]. Default value is 3
* Supported values are [1,3]. Default value is 1
*/
LPFC_ATTR_R(enable_fc4_type, LPFC_ENABLE_BOTH,
LPFC_ATTR_R(enable_fc4_type, LPFC_ENABLE_FCP,
LPFC_ENABLE_FCP, LPFC_ENABLE_BOTH,
"Define fc4 type to register with fabric.");
......
......@@ -5891,10 +5891,17 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
/* Check to see if it matches any module parameter */
for (i = 0; i < lpfc_enable_nvmet_cnt; i++) {
if (wwn == lpfc_enable_nvmet[i]) {
#if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"6017 NVME Target %016llx\n",
wwn);
phba->nvmet_support = 1; /* a match */
#else
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"6021 Can't enable NVME Target."
" NVME_TARGET_FC infrastructure"
" is not in kernel\n");
#endif
}
}
}
......
......@@ -2149,7 +2149,7 @@ lpfc_nvme_create_localport(struct lpfc_vport *vport)
/* localport is allocated from the stack, but the registration
* call allocates heap memory as well as the private area.
*/
#ifdef CONFIG_LPFC_NVME_INITIATOR
#if (IS_ENABLED(CONFIG_NVME_FC))
ret = nvme_fc_register_localport(&nfcp_info, &lpfc_nvme_template,
&vport->phba->pcidev->dev, &localport);
#else
......@@ -2190,7 +2190,7 @@ lpfc_nvme_create_localport(struct lpfc_vport *vport)
void
lpfc_nvme_destroy_localport(struct lpfc_vport *vport)
{
#ifdef CONFIG_LPFC_NVME_INITIATOR
#if (IS_ENABLED(CONFIG_NVME_FC))
struct nvme_fc_local_port *localport;
struct lpfc_nvme_lport *lport;
struct lpfc_nvme_rport *rport = NULL, *rport_next = NULL;
......@@ -2274,7 +2274,7 @@ lpfc_nvme_update_localport(struct lpfc_vport *vport)
int
lpfc_nvme_register_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
#ifdef CONFIG_LPFC_NVME_INITIATOR
#if (IS_ENABLED(CONFIG_NVME_FC))
int ret = 0;
struct nvme_fc_local_port *localport;
struct lpfc_nvme_lport *lport;
......@@ -2403,7 +2403,7 @@ lpfc_nvme_register_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
void
lpfc_nvme_unregister_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
#ifdef CONFIG_LPFC_NVME_INITIATOR
#if (IS_ENABLED(CONFIG_NVME_FC))
int ret;
struct nvme_fc_local_port *localport;
struct lpfc_nvme_lport *lport;
......
......@@ -671,7 +671,7 @@ lpfc_nvmet_create_targetport(struct lpfc_hba *phba)
lpfc_tgttemplate.target_features = NVMET_FCTGTFEAT_READDATA_RSP |
NVMET_FCTGTFEAT_NEEDS_CMD_CPUSCHED;
#ifdef CONFIG_LPFC_NVME_TARGET
#if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
error = nvmet_fc_register_targetport(&pinfo, &lpfc_tgttemplate,
&phba->pcidev->dev,
&phba->targetport);
......@@ -756,7 +756,7 @@ lpfc_sli4_nvmet_xri_aborted(struct lpfc_hba *phba,
void
lpfc_nvmet_destroy_targetport(struct lpfc_hba *phba)
{
#ifdef CONFIG_LPFC_NVME_TARGET
#if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
struct lpfc_nvmet_tgtport *tgtp;
if (phba->nvmet_support == 0)
......@@ -788,7 +788,7 @@ static void
lpfc_nvmet_unsol_ls_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
struct hbq_dmabuf *nvmebuf)
{
#ifdef CONFIG_LPFC_NVME_TARGET
#if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
struct lpfc_nvmet_tgtport *tgtp;
struct fc_frame_header *fc_hdr;
struct lpfc_nvmet_rcv_ctx *ctxp;
......@@ -891,7 +891,7 @@ lpfc_nvmet_unsol_fcp_buffer(struct lpfc_hba *phba,
struct rqb_dmabuf *nvmebuf,
uint64_t isr_timestamp)
{
#ifdef CONFIG_LPFC_NVME_TARGET
#if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
struct lpfc_nvmet_rcv_ctx *ctxp;
struct lpfc_nvmet_tgtport *tgtp;
struct fc_frame_header *fc_hdr;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment