Commit 7d9485e2 authored by Bernie Thompson's avatar Bernie Thompson Committed by Greg Kroah-Hartman

Staging: udlfb: Add functions to expose sysfs metrics and controls

Add sysfs controls for edid and performance metrics

There are 8 new files exposed in /sys/class/graphics/fb*

edid - returns 128 byte edid blog, suitable for parsing with parse-edid
metrics_bytes_identical
metrics_bytes_rendered
metrics_bytes_sent
metrics_cpu_kcycles_used
metrics_misc
and metrics_reset, which resets all perf metrics to zero

The 6 perf metrics are of type atomic_t.
So these metrics return precise results for short benchmarks, but
any test approx a minute or longer runtime may roll over.
Signed-off-by: default avatarBernie Thompson <bernie@plugable.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 4574203f
......@@ -818,6 +818,21 @@ static void dlfb_ops_fillrect(struct fb_info *info,
}
static void dlfb_get_edid(struct dlfb_data *dev)
{
int i;
int ret;
char rbuf[2];
for (i = 0; i < sizeof(dev->edid); i++) {
ret = usb_control_msg(dev->udev,
usb_rcvctrlpipe(dev->udev, 0), (0x02),
(0x80 | (0x02 << 5)), i << 8, 0xA1, rbuf, 2,
0);
dev->edid[i] = rbuf[1];
}
}
static int dlfb_ops_ioctl(struct fb_info *info, unsigned int cmd,
unsigned long arg)
{
......@@ -924,6 +939,33 @@ static void dlfb_delete(struct kref *kref)
kfree(dev);
}
/*
* Check whether a video mode is supported by the DisplayLink chip
* We start from monitor's modes, so don't need to filter that here
*/
static int dlfb_is_valid_mode(struct fb_videomode *mode,
struct fb_info *info)
{
struct dlfb_data *dev = info->par;
if (mode->xres * mode->yres > dev->sku_pixel_limit)
return 0;
return 1;
}
static void dlfb_var_color_format(struct fb_var_screeninfo *var)
{
const struct fb_bitfield red = { 11, 5, 0 };
const struct fb_bitfield green = { 5, 6, 0 };
const struct fb_bitfield blue = { 0, 5, 0 };
var->bits_per_pixel = 16;
var->red = red;
var->green = green;
var->blue = blue;
}
static int dlfb_ops_blank(int blank_mode, struct fb_info *info)
{
struct dlfb_data *dev_info = info->par;
......@@ -953,6 +995,215 @@ static struct fb_ops dlfb_ops = {
.fb_blank = dlfb_ops_blank,
};
/*
* Calls dlfb_get_edid() to query the EDID of attached monitor via usb cmds
* Then parses EDID into three places used by various parts of fbdev:
* fb_var_screeninfo contains the timing of the monitor's preferred mode
* fb_info.monspecs is full parsed EDID info, including monspecs.modedb
* fb_info.modelist is a linked list of all monitor & VESA modes which work
*
* If EDID is not readable/valid, then modelist is all VESA modes,
* monspecs is NULL, and fb_var_screeninfo is set to safe VESA mode
* Returns 0 if EDID parses successfully
*/
static int dlfb_parse_edid(struct dlfb_data *dev,
struct fb_var_screeninfo *var,
struct fb_info *info)
{
int i;
const struct fb_videomode *default_vmode = NULL;
int result = 0;
fb_destroy_modelist(&info->modelist);
memset(&info->monspecs, 0, sizeof(info->monspecs));
dlfb_get_edid(dev);
fb_edid_to_monspecs(dev->edid, &info->monspecs);
if (info->monspecs.modedb_len > 0) {
for (i = 0; i < info->monspecs.modedb_len; i++) {
if (dlfb_is_valid_mode(&info->monspecs.modedb[i], info))
fb_add_videomode(&info->monspecs.modedb[i],
&info->modelist);
}
default_vmode = fb_find_best_display(&info->monspecs,
&info->modelist);
} else {
struct fb_videomode fb_vmode = {0};
dl_err("Unable to get valid EDID from device/display\n");
result = 1;
/*
* Add the standard VESA modes to our modelist
* Since we don't have EDID, there may be modes that
* overspec monitor and/or are incorrect aspect ratio, etc.
* But at least the user has a chance to choose
*/
for (i = 0; i < VESA_MODEDB_SIZE; i++) {
if (dlfb_is_valid_mode((struct fb_videomode *)
&vesa_modes[i], info))
fb_add_videomode(&vesa_modes[i],
&info->modelist);
}
/*
* default to resolution safe for projectors
* (since they are most common case without EDID)
*/
fb_vmode.xres = 800;
fb_vmode.yres = 600;
fb_vmode.refresh = 60;
default_vmode = fb_find_nearest_mode(&fb_vmode,
&info->modelist);
}
fb_videomode_to_var(var, default_vmode);
dlfb_var_color_format(var);
return result;
}
static ssize_t metrics_bytes_rendered_show(struct device *fbdev,
struct device_attribute *a, char *buf) {
struct fb_info *fb_info = dev_get_drvdata(fbdev);
struct dlfb_data *dev = fb_info->par;
return snprintf(buf, PAGE_SIZE, "%u\n",
atomic_read(&dev->bytes_rendered));
}
static ssize_t metrics_bytes_identical_show(struct device *fbdev,
struct device_attribute *a, char *buf) {
struct fb_info *fb_info = dev_get_drvdata(fbdev);
struct dlfb_data *dev = fb_info->par;
return snprintf(buf, PAGE_SIZE, "%u\n",
atomic_read(&dev->bytes_identical));
}
static ssize_t metrics_bytes_sent_show(struct device *fbdev,
struct device_attribute *a, char *buf) {
struct fb_info *fb_info = dev_get_drvdata(fbdev);
struct dlfb_data *dev = fb_info->par;
return snprintf(buf, PAGE_SIZE, "%u\n",
atomic_read(&dev->bytes_sent));
}
static ssize_t metrics_cpu_kcycles_used_show(struct device *fbdev,
struct device_attribute *a, char *buf) {
struct fb_info *fb_info = dev_get_drvdata(fbdev);
struct dlfb_data *dev = fb_info->par;
return snprintf(buf, PAGE_SIZE, "%u\n",
atomic_read(&dev->cpu_kcycles_used));
}
static ssize_t metrics_misc_show(struct device *fbdev,
struct device_attribute *a, char *buf) {
struct fb_info *fb_info = dev_get_drvdata(fbdev);
struct dlfb_data *dev = fb_info->par;
return snprintf(buf, PAGE_SIZE,
"Calls to\ndamage: %u\nblit: %u\n"
"defio faults: %u\ncopy: %u\n"
"fill: %u\n\n"
"active framebuffer clients: %d\n"
"urbs available %d(%d)\n"
"Shadow framebuffer in use? %s\n"
"Any lost pixels? %s\n",
atomic_read(&dev->damage_count),
atomic_read(&dev->blit_count),
atomic_read(&dev->defio_fault_count),
atomic_read(&dev->copy_count),
atomic_read(&dev->fill_count),
dev->fb_count,
dev->urbs.available, dev->urbs.limit_sem.count,
(dev->backing_buffer) ? "yes" : "no",
atomic_read(&dev->lost_pixels) ? "yes" : "no");
}
static ssize_t edid_show(struct kobject *kobj, struct bin_attribute *a,
char *buf, loff_t off, size_t count) {
struct device *fbdev = container_of(kobj, struct device, kobj);
struct fb_info *fb_info = dev_get_drvdata(fbdev);
struct dlfb_data *dev = fb_info->par;
char *edid = &dev->edid[0];
const size_t size = sizeof(dev->edid);
if (dlfb_parse_edid(dev, &fb_info->var, fb_info))
return 0;
if (off >= size)
return 0;
if (off + count > size)
count = size - off;
memcpy(buf, edid + off, count);
return count;
}
static ssize_t metrics_reset_store(struct device *fbdev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct fb_info *fb_info = dev_get_drvdata(fbdev);
struct dlfb_data *dev = fb_info->par;
atomic_set(&dev->bytes_rendered, 0);
atomic_set(&dev->bytes_identical, 0);
atomic_set(&dev->bytes_sent, 0);
atomic_set(&dev->cpu_kcycles_used, 0);
atomic_set(&dev->blit_count, 0);
atomic_set(&dev->copy_count, 0);
atomic_set(&dev->fill_count, 0);
atomic_set(&dev->defio_fault_count, 0);
atomic_set(&dev->damage_count, 0);
return count;
}
static ssize_t use_defio_show(struct device *fbdev,
struct device_attribute *a, char *buf) {
struct fb_info *fb_info = dev_get_drvdata(fbdev);
struct dlfb_data *dev = fb_info->par;
return snprintf(buf, PAGE_SIZE, "%d\n",
atomic_read(&dev->use_defio));
}
static ssize_t use_defio_store(struct device *fbdev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct fb_info *fb_info = dev_get_drvdata(fbdev);
struct dlfb_data *dev = fb_info->par;
if (count > 0) {
if (buf[0] == '0')
atomic_set(&dev->use_defio, 0);
if (buf[0] == '1')
atomic_set(&dev->use_defio, 1);
}
return count;
}
static struct bin_attribute edid_attr = {
.attr.name = "edid",
.attr.mode = 0444,
.size = 128,
.read = edid_show,
};
static struct device_attribute fb_device_attrs[] = {
__ATTR_RO(metrics_bytes_rendered),
__ATTR_RO(metrics_bytes_identical),
__ATTR_RO(metrics_bytes_sent),
__ATTR_RO(metrics_cpu_kcycles_used),
__ATTR_RO(metrics_misc),
__ATTR(metrics_reset, S_IWUGO, NULL, metrics_reset_store),
__ATTR_RW(use_defio),
};
/*
* This is necessary before we can communicate with the display controller.
*/
......
......@@ -33,8 +33,12 @@ struct dlfb_data {
char *bufend;
char *backing_buffer;
struct mutex bulk_mutex;
int fb_count;
atomic_t usb_active; /* 0 = update virtual buffer, but no usb traffic */
atomic_t lost_pixels; /* 1 = a render op failed. Need screen refresh */
atomic_t use_defio; /* 0 = rely on ioctls and blit/copy/fill rects */
char edid[128];
int sku_pixel_limit;
int screen_size;
int line_length;
struct completion done;
......@@ -43,6 +47,17 @@ struct dlfb_data {
int base8;
int base8d;
u32 pseudo_palette[256];
/* blit-only rendering path metrics, exposed through sysfs */
atomic_t bytes_rendered; /* raw pixel-bytes driver asked to render */
atomic_t bytes_identical; /* saved effort with backbuffer comparison */
atomic_t bytes_sent; /* to usb, after compression including overhead */
atomic_t cpu_kcycles_used; /* transpired during pixel processing */
/* interface usage metrics. Clients can call driver via several */
atomic_t blit_count;
atomic_t copy_count;
atomic_t fill_count;
atomic_t damage_count;
atomic_t defio_fault_count;
};
#define NR_USB_REQUEST_I2C_SUB_IO 0x02
......@@ -99,6 +114,9 @@ static int dlfb_bulk_msg(struct dlfb_data *dev_info, int len)
#define dlfb_set_register insert_command
/* remove once this gets added to sysfs.h */
#define __ATTR_RW(attr) __ATTR(attr, 0644, attr##_show, attr##_store)
#define dl_err(format, arg...) \
dev_err(dev->gdev, "dlfb: " format, ## arg)
#define dl_warn(format, arg...) \
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment