wireless: consolidate on a single escape_essid implementation

Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/Kconfig

@@ -271,6 +271,7 @@ config LIBERTAS
 	tristate "Marvell 8xxx Libertas WLAN driver support"
 	depends on WLAN_80211
 	select WIRELESS_EXT
+	select LIB80211
 	select FW_LOADER
 	---help---
 	  A library for Marvell Libertas 8xxx devices.

drivers/net/wireless/ipw2100.c

@@ -1975,7 +1975,7 @@ static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status)
 	}
 
 	IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID=%pM)\n",
-		       priv->net_dev->name, escape_essid(essid, essid_len),
+		       priv->net_dev->name, escape_ssid(essid, essid_len),
 		       txratename, chan, bssid);
 
 	/* now we copy read ssid into dev */
@@ -2003,7 +2003,7 @@ static int ipw2100_set_essid(struct ipw2100_priv *priv, char *essid,
 	};
 	int err;
 
-	IPW_DEBUG_HC("SSID: '%s'\n", escape_essid(essid, ssid_len));
+	IPW_DEBUG_HC("SSID: '%s'\n", escape_ssid(essid, ssid_len));
 
 	if (ssid_len)
 		memcpy(cmd.host_command_parameters, essid, ssid_len);
@@ -2046,7 +2046,7 @@ static void isr_indicate_association_lost(struct ipw2100_priv *priv, u32 status)
 {
 	IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
 		  "disassociated: '%s' %pM \n",
-		  escape_essid(priv->essid, priv->essid_len),
+		  escape_ssid(priv->essid, priv->essid_len),
 		  priv->bssid);
 
 	priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
@@ -6987,7 +6987,7 @@ static int ipw2100_wx_set_essid(struct net_device *dev,
 		goto done;
 	}
 
-	IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n", escape_essid(essid, length),
+	IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n", escape_ssid(essid, length),
 		     length);
 
 	priv->essid_len = length;
@@ -7014,7 +7014,7 @@ static int ipw2100_wx_get_essid(struct net_device *dev,
 	 * configured ESSID then return that; otherwise return ANY */
 	if (priv->config & CFG_STATIC_ESSID || priv->status & STATUS_ASSOCIATED) {
 		IPW_DEBUG_WX("Getting essid: '%s'\n",
-			     escape_essid(priv->essid, priv->essid_len));
+			     escape_ssid(priv->essid, priv->essid_len));
 		memcpy(extra, priv->essid, priv->essid_len);
 		wrqu->essid.length = priv->essid_len;
 		wrqu->essid.flags = 1;	/* active */

drivers/net/wireless/ipw2200.h

@@ -48,6 +48,7 @@
 #include <linux/jiffies.h>
 #include <asm/io.h>
 
+#include <net/lib80211.h>
 #include <net/ieee80211.h>
 #include <net/ieee80211_radiotap.h>
 

drivers/net/wireless/iwlwifi/Kconfig

@@ -4,6 +4,7 @@ config IWLWIFI
 config IWLCORE
 	tristate "Intel Wireless Wifi Core"
 	depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
+	select LIB80211
 	select IWLWIFI
 	select MAC80211_LEDS if IWLWIFI_LEDS
 	select LEDS_CLASS if IWLWIFI_LEDS
@@ -105,6 +106,7 @@ config IWL3945
 	tristate "Intel PRO/Wireless 3945ABG/BG Network Connection"
 	depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
 	select FW_LOADER
+	select LIB80211
 	select IWLWIFI
 	select MAC80211_LEDS if IWL3945_LEDS
 	select LEDS_CLASS if IWL3945_LEDS

drivers/net/wireless/iwlwifi/iwl-scan.c

@@ -25,8 +25,10 @@
  * Tomas Winkler <tomas.winkler@intel.com>
  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  *****************************************************************************/
-#include <net/mac80211.h>
+#include <linux/types.h>
 #include <linux/etherdevice.h>
+#include <net/lib80211.h>
+#include <net/mac80211.h>
 
 #include "iwl-eeprom.h"
 #include "iwl-dev.h"
@@ -64,48 +66,6 @@
 #define IWL_SCAN_PROBE_MASK(n) 	cpu_to_le32((BIT(n) | (BIT(n) - BIT(1))))
 
 
-static int iwl_is_empty_essid(const char *essid, int essid_len)
-{
-	/* Single white space is for Linksys APs */
-	if (essid_len == 1 && essid[0] == ' ')
-		return 1;
-
-	/* Otherwise, if the entire essid is 0, we assume it is hidden */
-	while (essid_len) {
-		essid_len--;
-		if (essid[essid_len] != '\0')
-			return 0;
-	}
-
-	return 1;
-}
-
-
-
-static const char *iwl_escape_essid(const char *essid, u8 essid_len)
-{
-	static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
-	const char *s = essid;
-	char *d = escaped;
-
-	if (iwl_is_empty_essid(essid, essid_len)) {
-		memcpy(escaped, "<hidden>", sizeof("<hidden>"));
-		return escaped;
-	}
-
-	essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE);
-	while (essid_len--) {
-		if (*s == '\0') {
-			*d++ = '\\';
-			*d++ = '0';
-			s++;
-		} else
-			*d++ = *s++;
-	}
-	*d = '\0';
-	return escaped;
-}
-
 /**
  * iwl_scan_cancel - Cancel any currently executing HW scan
  *
@@ -775,8 +735,8 @@ static void iwl_bg_request_scan(struct work_struct *data)
 	/* We should add the ability for user to lock to PASSIVE ONLY */
 	if (priv->one_direct_scan) {
 		IWL_DEBUG_SCAN("Start direct scan for '%s'\n",
-				iwl_escape_essid(priv->direct_ssid,
-				priv->direct_ssid_len));
+				escape_ssid(priv->direct_ssid,
+					    priv->direct_ssid_len));
 		scan->direct_scan[0].id = WLAN_EID_SSID;
 		scan->direct_scan[0].len = priv->direct_ssid_len;
 		memcpy(scan->direct_scan[0].ssid,
@@ -784,7 +744,7 @@ static void iwl_bg_request_scan(struct work_struct *data)
 		n_probes++;
 	} else if (!iwl_is_associated(priv) && priv->essid_len) {
 		IWL_DEBUG_SCAN("Start direct scan for '%s' (not associated)\n",
-				iwl_escape_essid(priv->essid, priv->essid_len));
+				escape_ssid(priv->essid, priv->essid_len));
 		scan->direct_scan[0].id = WLAN_EID_SSID;
 		scan->direct_scan[0].len = priv->essid_len;
 		memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len);

drivers/net/wireless/iwlwifi/iwl3945-base.c

@@ -41,6 +41,7 @@
 #include <linux/if_arp.h>
 
 #include <net/ieee80211_radiotap.h>
+#include <net/lib80211.h>
 #include <net/mac80211.h>
 
 #include <asm/div64.h>
@@ -107,46 +108,6 @@ static const struct ieee80211_supported_band *iwl3945_get_band(
 	return priv->hw->wiphy->bands[band];
 }
 
-static int iwl3945_is_empty_essid(const char *essid, int essid_len)
-{
-	/* Single white space is for Linksys APs */
-	if (essid_len == 1 && essid[0] == ' ')
-		return 1;
-
-	/* Otherwise, if the entire essid is 0, we assume it is hidden */
-	while (essid_len) {
-		essid_len--;
-		if (essid[essid_len] != '\0')
-			return 0;
-	}
-
-	return 1;
-}
-
-static const char *iwl3945_escape_essid(const char *essid, u8 essid_len)
-{
-	static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
-	const char *s = essid;
-	char *d = escaped;
-
-	if (iwl3945_is_empty_essid(essid, essid_len)) {
-		memcpy(escaped, "<hidden>", sizeof("<hidden>"));
-		return escaped;
-	}
-
-	essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE);
-	while (essid_len--) {
-		if (*s == '\0') {
-			*d++ = '\\';
-			*d++ = '0';
-			s++;
-		} else
-			*d++ = *s++;
-	}
-	*d = '\0';
-	return escaped;
-}
-
 /*************** DMA-QUEUE-GENERAL-FUNCTIONS  *****
  * DMA services
  *
@@ -6193,8 +6154,7 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 	if (priv->one_direct_scan) {
 		IWL_DEBUG_SCAN
 		    ("Kicking off one direct scan for '%s'\n",
-		     iwl3945_escape_essid(priv->direct_ssid,
-				      priv->direct_ssid_len));
+		     escape_ssid(priv->direct_ssid, priv->direct_ssid_len));
 		scan->direct_scan[0].id = WLAN_EID_SSID;
 		scan->direct_scan[0].len = priv->direct_ssid_len;
 		memcpy(scan->direct_scan[0].ssid,
@@ -6203,7 +6163,7 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 	} else if (!iwl3945_is_associated(priv) && priv->essid_len) {
 		IWL_DEBUG_SCAN
 		  ("Kicking off one direct scan for '%s' when not associated\n",
-		   iwl3945_escape_essid(priv->essid, priv->essid_len));
+		   escape_ssid(priv->essid, priv->essid_len));
 		scan->direct_scan[0].id = WLAN_EID_SSID;
 		scan->direct_scan[0].len = priv->essid_len;
 		memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len);
@@ -7018,7 +6978,7 @@ static int iwl3945_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len)
 	}
 	if (len) {
 		IWL_DEBUG_SCAN("direct scan for %s [%d]\n ",
-			       iwl3945_escape_essid(ssid, len), (int)len);
+			       escape_ssid(ssid, len), (int)len);
 
 		priv->one_direct_scan = 1;
 		priv->direct_ssid_len = (u8)

drivers/net/wireless/libertas/assoc.c

 /* Copyright (C) 2006, Red Hat, Inc. */
 
+#include <linux/types.h>
 #include <linux/etherdevice.h>
+#include <net/lib80211.h>
 
 #include "assoc.h"
 #include "decl.h"
@@ -157,11 +159,11 @@ static int lbs_adhoc_join(struct lbs_private *priv,
 	lbs_deb_enter(LBS_DEB_ASSOC);
 
 	lbs_deb_join("current SSID '%s', ssid length %u\n",
-		escape_essid(priv->curbssparams.ssid,
+		escape_ssid(priv->curbssparams.ssid,
 		priv->curbssparams.ssid_len),
 		priv->curbssparams.ssid_len);
 	lbs_deb_join("requested ssid '%s', ssid length %u\n",
-		escape_essid(bss->ssid, bss->ssid_len),
+		escape_ssid(bss->ssid, bss->ssid_len),
 		bss->ssid_len);
 
 	/* check if the requested SSID is already joined */
@@ -325,7 +327,7 @@ static int lbs_adhoc_start(struct lbs_private *priv,
 	memcpy(cmd.ssid, assoc_req->ssid, assoc_req->ssid_len);
 
 	lbs_deb_join("ADHOC_START: SSID '%s', ssid length %u\n",
-		escape_essid(assoc_req->ssid, assoc_req->ssid_len),
+		escape_ssid(assoc_req->ssid, assoc_req->ssid_len),
 		assoc_req->ssid_len);
 
 	cmd.bsstype = CMD_BSS_TYPE_IBSS;
@@ -704,7 +706,7 @@ static int assoc_helper_essid(struct lbs_private *priv,
 		channel = assoc_req->channel;
 
 	lbs_deb_assoc("SSID '%s' requested\n",
-	              escape_essid(assoc_req->ssid, assoc_req->ssid_len));
+	              escape_ssid(assoc_req->ssid, assoc_req->ssid_len));
 	if (assoc_req->mode == IW_MODE_INFRA) {
 		lbs_send_specific_ssid_scan(priv, assoc_req->ssid,
 			assoc_req->ssid_len);
@@ -1228,7 +1230,7 @@ void lbs_association_worker(struct work_struct *work)
 		"    secinfo:  %s%s%s\n"
 		"    auth_mode: %d\n",
 		assoc_req->flags,
-		escape_essid(assoc_req->ssid, assoc_req->ssid_len),
+		escape_ssid(assoc_req->ssid, assoc_req->ssid_len),
 		assoc_req->channel, assoc_req->band, assoc_req->mode,
 		assoc_req->bssid,
 		assoc_req->secinfo.WPAenabled ? " WPA" : "",
@@ -1814,7 +1816,7 @@ static int lbs_adhoc_post(struct lbs_private *priv, struct cmd_header *resp)
 	wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
 
 	lbs_deb_join("ADHOC_RESP: Joined/started '%s', BSSID %pM, channel %d\n",
-		     escape_essid(bss->ssid, bss->ssid_len),
+		     escape_ssid(bss->ssid, bss->ssid_len),
 		     priv->curbssparams.bssid,
 		     priv->curbssparams.channel);
 

drivers/net/wireless/libertas/cmd.c

@@ -4,6 +4,7 @@
   */
 
 #include <net/iw_handler.h>
+#include <net/lib80211.h>
 #include <net/ieee80211.h>
 #include <linux/kfifo.h>
 #include "host.h"
@@ -1092,7 +1093,7 @@ int lbs_mesh_config(struct lbs_private *priv, uint16_t action, uint16_t chan)
 	}
 	lbs_deb_cmd("mesh config action %d type %x channel %d SSID %s\n",
 		    action, priv->mesh_tlv, chan,
-		    escape_essid(priv->mesh_ssid, priv->mesh_ssid_len));
+		    escape_ssid(priv->mesh_ssid, priv->mesh_ssid_len));
 
 	return __lbs_mesh_config_send(priv, &cmd, action, priv->mesh_tlv);
 }

drivers/net/wireless/libertas/debugfs.c

@@ -5,6 +5,7 @@
 #include <linux/mm.h>
 #include <linux/string.h>
 #include <net/iw_handler.h>
+#include <net/lib80211.h>
 
 #include "dev.h"
 #include "decl.h"
@@ -85,7 +86,7 @@ static ssize_t lbs_getscantable(struct file *file, char __user *userbuf,
 				spectrum_mgmt ? 'S' : ' ');
 		pos += snprintf(buf+pos, len-pos, " %04d |", SCAN_RSSI(iter_bss->rssi));
 		pos += snprintf(buf+pos, len-pos, " %s\n",
-		                escape_essid(iter_bss->ssid, iter_bss->ssid_len));
+		                escape_ssid(iter_bss->ssid, iter_bss->ssid_len));
 
 		numscansdone++;
 	}

drivers/net/wireless/libertas/decl.h

@@ -74,8 +74,4 @@ void lbs_host_to_card_done(struct lbs_private *priv);
 
 int lbs_update_channel(struct lbs_private *priv);
 
-#ifndef CONFIG_IEEE80211
-const char *escape_essid(const char *essid, u8 essid_len);
-#endif
-
 #endif

drivers/net/wireless/libertas/main.c

@@ -1646,33 +1646,6 @@ static int lbs_add_rtap(struct lbs_private *priv)
 	return ret;
 }
 
-#ifndef CONFIG_IEEE80211
-const char *escape_essid(const char *essid, u8 essid_len)
-{
-	static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
-	const char *s = essid;
-	char *d = escaped;
-
-	if (ieee80211_is_empty_essid(essid, essid_len)) {
-		memcpy(escaped, "<hidden>", sizeof("<hidden>"));
-		return escaped;
-	}
-
-	essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE);
-	while (essid_len--) {
-		if (*s == '\0') {
-			*d++ = '\\';
-			*d++ = '0';
-			s++;
-		} else {
-			*d++ = *s++;
-		}
-	}
-	*d = '\0';
-	return escaped;
-}
-#endif
-
 module_init(lbs_init_module);
 module_exit(lbs_exit_module);
 

drivers/net/wireless/libertas/scan.c

@@ -4,9 +4,12 @@
   * IOCTL handlers as well as command preperation and response routines
   *  for sending scan commands to the firmware.
   */
+#include <linux/types.h>
 #include <linux/etherdevice.h>
 #include <asm/unaligned.h>
 
+#include <net/lib80211.h>
+
 #include "host.h"
 #include "decl.h"
 #include "dev.h"
@@ -452,7 +455,7 @@ int lbs_scan_networks(struct lbs_private *priv, int full_scan)
 	list_for_each_entry(iter, &priv->network_list, list)
 		lbs_deb_scan("%02d: BSSID %pM, RSSI %d, SSID '%s'\n",
 			     i++, iter->bssid, iter->rssi,
-			     escape_essid(iter->ssid, iter->ssid_len));
+			     escape_ssid(iter->ssid, iter->ssid_len));
 	mutex_unlock(&priv->lock);
 #endif
 
@@ -599,7 +602,7 @@ static int lbs_process_bss(struct bss_descriptor *bss,
 			bss->ssid_len = min_t(int, 32, elem->len);
 			memcpy(bss->ssid, elem->data, bss->ssid_len);
 			lbs_deb_scan("got SSID IE: '%s', len %u\n",
-			             escape_essid(bss->ssid, bss->ssid_len),
+			             escape_ssid(bss->ssid, bss->ssid_len),
 			             bss->ssid_len);
 			break;
 
@@ -742,7 +745,7 @@ int lbs_send_specific_ssid_scan(struct lbs_private *priv, uint8_t *ssid,
 	int ret = 0;
 
 	lbs_deb_enter_args(LBS_DEB_SCAN, "SSID '%s'\n",
-			   escape_essid(ssid, ssid_len));
+			   escape_ssid(ssid, ssid_len));
 
 	if (!ssid_len)
 		goto out;
@@ -966,7 +969,7 @@ int lbs_set_scan(struct net_device *dev, struct iw_request_info *info,
 		priv->scan_ssid_len = req->essid_len;
 		memcpy(priv->scan_ssid, req->essid, priv->scan_ssid_len);
 		lbs_deb_wext("set_scan, essid '%s'\n",
-			escape_essid(priv->scan_ssid, priv->scan_ssid_len));
+			escape_ssid(priv->scan_ssid, priv->scan_ssid_len));
 	} else {
 		priv->scan_ssid_len = 0;
 	}

drivers/net/wireless/libertas/wext.c

@@ -8,6 +8,7 @@
 #include <linux/wireless.h>
 #include <linux/bitops.h>
 
+#include <net/lib80211.h>
 #include <net/ieee80211.h>
 #include <net/iw_handler.h>
 
@@ -2005,7 +2006,7 @@ static int lbs_set_essid(struct net_device *dev, struct iw_request_info *info,
 		lbs_deb_wext("requested any SSID\n");
 	} else {
 		lbs_deb_wext("requested SSID '%s'\n",
-		             escape_essid(ssid, ssid_len));
+		             escape_ssid(ssid, ssid_len));
 	}
 
 out:

include/net/ieee80211.h

@@ -127,10 +127,6 @@ static inline bool ieee80211_ratelimit_debug(u32 level)
 }
 #endif				/* CONFIG_IEEE80211_DEBUG */
 
-/* escape_essid() is intended to be used in debug (and possibly error)
- * messages. It should never be used for passing essid to user space. */
-const char *escape_essid(const char *essid, u8 essid_len);
-
 /*
  * To use the debug system:
  *
@@ -1135,22 +1131,6 @@ static inline void *ieee80211_priv(struct net_device *dev)
 	return ((struct ieee80211_device *)netdev_priv(dev))->priv;
 }
 
-static inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
-{
-	/* Single white space is for Linksys APs */
-	if (essid_len == 1 && essid[0] == ' ')
-		return 1;
-
-	/* Otherwise, if the entire essid is 0, we assume it is hidden */
-	while (essid_len) {
-		essid_len--;
-		if (essid[essid_len] != '\0')
-			return 0;
-	}
-
-	return 1;
-}
-
 static inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee,
 					  int mode)
 {

include/net/lib80211.h

+/*
+ * lib80211.h -- common bits for IEEE802.11 wireless drivers
+ *
+ * Copyright (c) 2008, John W. Linville <linville@tuxdriver.com>
+ *
+ */
+
+#ifndef LIB80211_H
+#define LIB80211_H
+
+/* escape_ssid() is intended to be used in debug (and possibly error)
+ * messages. It should never be used for passing ssid to user space. */
+const char *escape_ssid(const char *ssid, u8 ssid_len);
+
+static inline int is_empty_ssid(const char *ssid, int ssid_len)
+{
+	/* Single white space is for Linksys APs */
+	if (ssid_len == 1 && ssid[0] == ' ')
+		return 1;
+
+	/* Otherwise, if the entire ssid is 0, we assume it is hidden */
+	while (ssid_len) {
+		ssid_len--;
+		if (ssid[ssid_len] != '\0')
+			return 0;
+	}
+
+	return 1;
+}
+
+#endif /* LIB80211_H */

net/ieee80211/Kconfig

@@ -11,6 +11,7 @@ config IEEE80211
 	select IEEE80211_CRYPT_WEP
 	select IEEE80211_CRYPT_TKIP
 	select IEEE80211_CRYPT_CCMP
+	select LIB80211
 	---help---
 	This option enables the hardware independent IEEE 802.11
 	networking stack.  This component is deprecated in favor of the

net/ieee80211/ieee80211_module.c

@@ -308,31 +308,5 @@ MODULE_PARM_DESC(debug, "debug output mask");
 module_exit(ieee80211_exit);
 module_init(ieee80211_init);
 
-const char *escape_essid(const char *essid, u8 essid_len)
-{
-	static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
-	const char *s = essid;
-	char *d = escaped;
-
-	if (ieee80211_is_empty_essid(essid, essid_len)) {
-		memcpy(escaped, "<hidden>", sizeof("<hidden>"));
-		return escaped;
-	}
-
-	essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE);
-	while (essid_len--) {
-		if (*s == '\0') {
-			*d++ = '\\';
-			*d++ = '0';
-			s++;
-		} else {
-			*d++ = *s++;
-		}
-	}
-	*d = '\0';
-	return escaped;
-}
-
 EXPORT_SYMBOL(alloc_ieee80211);
 EXPORT_SYMBOL(free_ieee80211);
-EXPORT_SYMBOL(escape_essid);

net/ieee80211/ieee80211_rx.c

@@ -32,6 +32,7 @@
 #include <asm/uaccess.h>
 #include <linux/ctype.h>
 
+#include <net/lib80211.h>
 #include <net/ieee80211.h>
 
 static void ieee80211_monitor_rx(struct ieee80211_device *ieee,
@@ -1145,8 +1146,8 @@ static int ieee80211_parse_info_param(struct ieee80211_info_element
 
 		switch (info_element->id) {
 		case MFIE_TYPE_SSID:
-			if (ieee80211_is_empty_essid(info_element->data,
-						     info_element->len)) {
+			if (is_empty_ssid(info_element->data,
+					  info_element->len)) {
 				network->flags |= NETWORK_EMPTY_ESSID;
 				break;
 			}
@@ -1390,7 +1391,7 @@ static int ieee80211_handle_assoc_resp(struct ieee80211_device *ieee, struct iee
 			network->mode |= IEEE_B;
 	}
 
-	if (ieee80211_is_empty_essid(network->ssid, network->ssid_len))
+	if (is_empty_ssid(network->ssid, network->ssid_len))
 		network->flags |= NETWORK_EMPTY_ESSID;
 
 	memcpy(&network->stats, stats, sizeof(network->stats));
@@ -1456,13 +1457,13 @@ static int ieee80211_network_init(struct ieee80211_device *ieee, struct ieee8021
 	if (network->mode == 0) {
 		IEEE80211_DEBUG_SCAN("Filtered out '%s (%pM)' "
 				     "network.\n",
-				     escape_essid(network->ssid,
-						  network->ssid_len),
+				     escape_ssid(network->ssid,
+						 network->ssid_len),
 				     network->bssid);
 		return 1;
 	}
 
-	if (ieee80211_is_empty_essid(network->ssid, network->ssid_len))
+	if (is_empty_ssid(network->ssid, network->ssid_len))
 		network->flags |= NETWORK_EMPTY_ESSID;
 
 	memcpy(&network->stats, stats, sizeof(network->stats));
@@ -1576,7 +1577,7 @@ static void ieee80211_process_probe_response(struct ieee80211_device
 
 	IEEE80211_DEBUG_SCAN("'%s' (%pM"
 		     "): %c%c%c%c %c%c%c%c-%c%c%c%c %c%c%c%c\n",
-		     escape_essid(info_element->data, info_element->len),
+		     escape_ssid(info_element->data, info_element->len),
 		     beacon->header.addr3,
 		     (beacon->capability & cpu_to_le16(1 << 0xf)) ? '1' : '0',
 		     (beacon->capability & cpu_to_le16(1 << 0xe)) ? '1' : '0',
@@ -1597,8 +1598,8 @@ static void ieee80211_process_probe_response(struct ieee80211_device
 
 	if (ieee80211_network_init(ieee, beacon, &network, stats)) {
 		IEEE80211_DEBUG_SCAN("Dropped '%s' (%pM) via %s.\n",
-				     escape_essid(info_element->data,
-						  info_element->len),
+				     escape_ssid(info_element->data,
+						 info_element->len),
 				     beacon->header.addr3,
 				     is_beacon(beacon->header.frame_ctl) ?
 				     "BEACON" : "PROBE RESPONSE");
@@ -1635,8 +1636,8 @@ static void ieee80211_process_probe_response(struct ieee80211_device
 			target = oldest;
 			IEEE80211_DEBUG_SCAN("Expired '%s' (%pM) from "
 					     "network list.\n",
-					     escape_essid(target->ssid,
-							  target->ssid_len),
+					     escape_ssid(target->ssid,
+							 target->ssid_len),
 					     target->bssid);
 			ieee80211_network_reset(target);
 		} else {
@@ -1648,8 +1649,8 @@ static void ieee80211_process_probe_response(struct ieee80211_device
 
 #ifdef CONFIG_IEEE80211_DEBUG
 		IEEE80211_DEBUG_SCAN("Adding '%s' (%pM) via %s.\n",
-				     escape_essid(network.ssid,
-						  network.ssid_len),
+				     escape_ssid(network.ssid,
+						 network.ssid_len),
 				     network.bssid,
 				     is_beacon(beacon->header.frame_ctl) ?
 				     "BEACON" : "PROBE RESPONSE");
@@ -1659,8 +1660,8 @@ static void ieee80211_process_probe_response(struct ieee80211_device
 		list_add_tail(&target->list, &ieee->network_list);
 	} else {
 		IEEE80211_DEBUG_SCAN("Updating '%s' (%pM) via %s.\n",
-				     escape_essid(target->ssid,
-						  target->ssid_len),
+				     escape_ssid(target->ssid,
+						 target->ssid_len),
 				     target->bssid,
 				     is_beacon(beacon->header.frame_ctl) ?
 				     "BEACON" : "PROBE RESPONSE");

net/ieee80211/ieee80211_wx.c

@@ -283,8 +283,8 @@ int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
 		else
 			IEEE80211_DEBUG_SCAN("Not showing network '%s ("
 					     "%pM)' due to age (%dms).\n",
-					     escape_essid(network->ssid,
-							  network->ssid_len),
+					     escape_ssid(network->ssid,
+							 network->ssid_len),
 					     network->bssid,
 					     jiffies_to_msecs(jiffies -
 							      network->
@@ -408,7 +408,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
 			memset(sec.keys[key] + erq->length, 0,
 			       len - erq->length);
 		IEEE80211_DEBUG_WX("Setting key %d to '%s' (%d:%d bytes)\n",
-				   key, escape_essid(sec.keys[key], len),
+				   key, escape_ssid(sec.keys[key], len),
 				   erq->length, len);
 		sec.key_sizes[key] = len;
 		if (*crypt)

net/wireless/Kconfig

@@ -72,3 +72,13 @@ config WIRELESS_EXT_SYSFS
 
 	  Say Y if you have programs using it, like old versions of
 	  hal.
+
+config LIB80211
+	tristate "Common routines for IEEE802.11 drivers"
+	default n
+	help
+	  This options enables a library of common routines used
+	  by IEEE802.11 wireless LAN drivers.
+
+	  Drivers should select this themselves if needed.  Say Y if
+	  you want this built into your kernel.

net/wireless/Makefile

 obj-$(CONFIG_WIRELESS_EXT) += wext.o
 obj-$(CONFIG_CFG80211) += cfg80211.o
+obj-$(CONFIG_LIB80211) += lib80211.o
 
 cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o
 cfg80211-$(CONFIG_NL80211) += nl80211.o

net/wireless/lib80211.c

+/*
+ * lib80211 -- common bits for IEEE802.11 drivers
+ *
+ * Copyright(c) 2008 John W. Linville <linville@tuxdriver.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/ieee80211.h>
+
+#include <net/lib80211.h>
+
+#define DRV_NAME        "lib80211"
+
+#define DRV_DESCRIPTION	"common routines for IEEE802.11 drivers"
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_AUTHOR("John W. Linville <linville@tuxdriver.com>");
+MODULE_LICENSE("GPL");
+
+const char *escape_ssid(const char *ssid, u8 ssid_len)
+{
+	static char escaped[IEEE80211_MAX_SSID_LEN * 2 + 1];
+	const char *s = ssid;
+	char *d = escaped;
+
+	if (is_empty_ssid(ssid, ssid_len)) {
+		memcpy(escaped, "<hidden>", sizeof("<hidden>"));
+		return escaped;
+	}
+
+	ssid_len = min_t(u8, ssid_len, IEEE80211_MAX_SSID_LEN);
+	while (ssid_len--) {
+		if (*s == '\0') {
+			*d++ = '\\';
+			*d++ = '0';
+			s++;
+		} else {
+			*d++ = *s++;
+		}
+	}
+	*d = '\0';
+	return escaped;
+}
+EXPORT_SYMBOL(escape_ssid);
+
+static int __init ieee80211_init(void)
+{
+	printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION "\n");
+	return 0;
+}
+
+static void __exit ieee80211_exit(void)
+{
+}
+
+module_init(ieee80211_init);
+module_exit(ieee80211_exit);