Merge with rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

Documentation/filesystems/sysfs-pci.txt

@@ -7,7 +7,6 @@ that support it.  For example, a given bus might look like this:
      |-- 0000:17:00.0
      |   |-- class
      |   |-- config
-     |   |-- detach_state
      |   |-- device
      |   |-- irq
      |   |-- local_cpus
@@ -19,7 +18,7 @@ that support it.  For example, a given bus might look like this:
      |   |-- subsystem_device
      |   |-- subsystem_vendor
      |   `-- vendor
-     `-- detach_state
+     `-- ...
 
 The topmost element describes the PCI domain and bus number.  In this case,
 the domain number is 0000 and the bus number is 17 (both values are in hex).
@@ -31,7 +30,6 @@ files, each with their own function.
        ----		   --------
        class		   PCI class (ascii, ro)
        config		   PCI config space (binary, rw)
-       detach_state	   connection status (bool, rw)
        device		   PCI device (ascii, ro)
        irq		   IRQ number (ascii, ro)
        local_cpus	   nearby CPU mask (cpumask, ro)
@@ -85,4 +83,4 @@ useful return codes should be provided.
 
 Legacy resources are protected by the HAVE_PCI_LEGACY define.  Platforms
 wishing to support legacy functionality should define it and provide
-pci_legacy_read, pci_legacy_write and pci_mmap_legacy_page_range functions.
+pci_legacy_read, pci_legacy_write and pci_mmap_legacy_page_range functions.
\ No newline at end of file

Documentation/power/devices.txt

@@ -207,27 +207,6 @@ SYSTEM_SHUTDOWN, I do not understand this one too much. probably event
 #READY_AFTER_RESUME
 #
 
-Driver Detach Power Management
-
-The kernel now supports the ability to place a device in a low-power
-state when it is detached from its driver, which happens when its
-module is removed. 
-
-Each device contains a 'detach_state' file in its sysfs directory
-which can be used to control this state. Reading from this file
-displays what the current detach state is set to. This is 0 (On) by
-default. A user may write a positive integer value to this file in the
-range of 1-4 inclusive. 
-
-A value of 1-3 will indicate the device should be placed in that
-low-power state, which will cause ->suspend() to be called for that
-device. A value of 4 indicates that the device should be shutdown, so
-->shutdown() will be called for that device. 
-
-The driver is responsible for reinitializing the device when the
-module is re-inserted during it's ->probe() (or equivalent) method. 
-The driver core will not call any extra functions when binding the
-device to the driver. 
 
 pm_message_t meaning
 

Documentation/powerpc/hvcs.txt

@@ -347,8 +347,8 @@ address that is created by firmware.  An example vty-server sysfs entry
 looks like the following:
 
 	Pow5:/sys/bus/vio/drivers/hvcs/30000004 # ls
-	.   current_vty   devspec  name          partner_vtys
-	..  detach_state  index    partner_clcs  vterm_state
+	.   current_vty   devspec       name          partner_vtys
+	..  index         partner_clcs  vterm_state
 
 Each entry is provided, by default with a "name" attribute.  Reading the
 "name" attribute will reveal the device type as shown in the following

drivers/base/Makefile

 # Makefile for the Linux device tree
 
-obj-y			:= core.o sys.o interface.o bus.o \
+obj-y			:= core.o sys.o bus.o \
 			   driver.o class.o class_simple.o platform.o \
 			   cpu.o firmware.o init.o map.o dmapool.o \
 			   attribute_container.o transport_class.o

drivers/base/bus.c

@@ -390,7 +390,6 @@ void device_release_driver(struct device * dev)
 		sysfs_remove_link(&drv->kobj, kobject_name(&dev->kobj));
 		sysfs_remove_link(&dev->kobj, "driver");
 		list_del_init(&dev->driver_list);
-		device_detach_shutdown(dev);
 		if (drv->remove)
 			drv->remove(dev);
 		dev->driver = NULL;

drivers/base/core.c

@@ -31,8 +31,6 @@ int (*platform_notify_remove)(struct device * dev) = NULL;
 #define to_dev(obj) container_of(obj, struct device, kobj)
 #define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr)
 
-extern struct attribute * dev_default_attrs[];
-
 static ssize_t
 dev_attr_show(struct kobject * kobj, struct attribute * attr, char * buf)
 {
@@ -89,7 +87,6 @@ static void device_release(struct kobject * kobj)
 static struct kobj_type ktype_device = {
 	.release	= device_release,
 	.sysfs_ops	= &dev_sysfs_ops,
-	.default_attrs	= dev_default_attrs,
 };
 
 

drivers/base/interface.c

-/*
- * drivers/base/interface.c - common driverfs interface that's exported to
- * 	the world for all devices.
- *
- * Copyright (c) 2002-3 Patrick Mochel
- * Copyright (c) 2002-3 Open Source Development Labs
- *
- * This file is released under the GPLv2
- *
- */
-
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/stat.h>
-#include <linux/string.h>
-
-/**
- *	detach_state - control the default power state for the device.
- *
- *	This is the state the device enters when it's driver module is
- *	unloaded. The value is an unsigned integer, in the range of 0-4.
- *	'0' indicates 'On', so no action will be taken when the driver is
- *	unloaded. This is the default behavior.
- *	'4' indicates 'Off', meaning the driver core will call the driver's
- *	shutdown method to quiesce the device.
- *	1-3 indicate a low-power state for the device to enter via the
- *	driver's suspend method.
- */
-
-static ssize_t detach_show(struct device * dev, char * buf)
-{
-	return sprintf(buf, "%u\n", dev->detach_state);
-}
-
-static ssize_t detach_store(struct device * dev, const char * buf, size_t n)
-{
-	u32 state;
-	state = simple_strtoul(buf, NULL, 10);
-	if (state > 4)
-		return -EINVAL;
-	dev->detach_state = state;
-	return n;
-}
-
-static DEVICE_ATTR(detach_state, 0644, detach_show, detach_store);
-
-
-struct attribute * dev_default_attrs[] = {
-	&dev_attr_detach_state.attr,
-	NULL,
-};

drivers/base/power/power.h

-
-
-enum {
-	DEVICE_PM_ON,
-	DEVICE_PM1,
-	DEVICE_PM2,
-	DEVICE_PM3,
-	DEVICE_PM_OFF,
-};
-
 /*
  * shutdown.c
  */
 
-extern int device_detach_shutdown(struct device *);
 extern void device_shutdown(void);
 
 

drivers/base/power/resume.c

@@ -22,8 +22,17 @@ extern int sysdev_resume(void);
 
 int resume_device(struct device * dev)
 {
-	if (dev->bus && dev->bus->resume)
+	if (dev->power.pm_parent
+			&& dev->power.pm_parent->power.power_state) {
+		dev_err(dev, "PM: resume from %d, parent %s still %d\n",
+			dev->power.power_state,
+			dev->power.pm_parent->bus_id,
+			dev->power.pm_parent->power.power_state);
+	}
+	if (dev->bus && dev->bus->resume) {
+		dev_dbg(dev,"resuming\n");
 		return dev->bus->resume(dev);
+	}
 	return 0;
 }
 

drivers/base/power/shutdown.c

@@ -19,20 +19,6 @@
 extern struct subsystem devices_subsys;
 
 
-int device_detach_shutdown(struct device * dev)
-{
-	if (!dev->detach_state)
-		return 0;
-
-	if (dev->detach_state == DEVICE_PM_OFF) {
-		if (dev->driver && dev->driver->shutdown)
-			dev->driver->shutdown(dev);
-		return 0;
-	}
-	return dpm_runtime_suspend(dev, dev->detach_state);
-}
-
-
 /**
  * We handle system devices differently - we suspend and shut them
  * down last and resume them first. That way, we don't do anything stupid like
@@ -52,13 +38,12 @@ void device_shutdown(void)
 	struct device * dev;
 
 	down_write(&devices_subsys.rwsem);
-	list_for_each_entry_reverse(dev, &devices_subsys.kset.list, kobj.entry) {
-		pr_debug("shutting down %s: ", dev->bus_id);
+	list_for_each_entry_reverse(dev, &devices_subsys.kset.list,
+				kobj.entry) {
 		if (dev->driver && dev->driver->shutdown) {
-			pr_debug("Ok\n");
+			dev_dbg(dev, "shutdown\n");
 			dev->driver->shutdown(dev);
-		} else
-			pr_debug("Ignored.\n");
+		}
 	}
 	up_write(&devices_subsys.rwsem);
 

drivers/base/power/suspend.c

@@ -39,12 +39,25 @@ int suspend_device(struct device * dev, pm_message_t state)
 {
 	int error = 0;
 
-	dev_dbg(dev, "suspending\n");
+	if (dev->power.power_state) {
+		dev_dbg(dev, "PM: suspend %d-->%d\n",
+			dev->power.power_state, state);
+	}
+	if (dev->power.pm_parent
+			&& dev->power.pm_parent->power.power_state) {
+		dev_err(dev,
+			"PM: suspend %d->%d, parent %s already %d\n",
+			dev->power.power_state, state,
+			dev->power.pm_parent->bus_id,
+			dev->power.pm_parent->power.power_state);
+	}
 
 	dev->power.prev_state = dev->power.power_state;
 
-	if (dev->bus && dev->bus->suspend && !dev->power.power_state)
+	if (dev->bus && dev->bus->suspend && !dev->power.power_state) {
+		dev_dbg(dev, "suspending\n");
 		error = dev->bus->suspend(dev, state);
+	}
 
 	return error;
 }

drivers/char/raw.c

@@ -122,7 +122,7 @@ raw_ioctl(struct inode *inode, struct file *filp,
 {
 	struct block_device *bdev = filp->private_data;
 
-	return blkdev_ioctl(bdev->bd_inode, filp, command, arg);
+	return blkdev_ioctl(bdev->bd_inode, NULL, command, arg);
 }
 
 static void bind_device(struct raw_config_request *rq)

drivers/pci/hotplug.c

@@ -52,116 +52,17 @@ int pci_hotplug (struct device *dev, char **envp, int num_envp,
 	if ((buffer_size - length <= 0) || (i >= num_envp))
 		return -ENOMEM;
 
+	envp[i++] = scratch;
+	length += scnprintf (scratch, buffer_size - length,
+			    "MODALIAS=pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x\n",
+			    pdev->vendor, pdev->device,
+			    pdev->subsystem_vendor, pdev->subsystem_device,
+			    (u8)(pdev->class >> 16), (u8)(pdev->class >> 8),
+			    (u8)(pdev->class));
+	if ((buffer_size - length <= 0) || (i >= num_envp))
+		return -ENOMEM;
+
 	envp[i] = NULL;
 
 	return 0;
 }
-
-static int pci_visit_bus (struct pci_visit * fn, struct pci_bus_wrapped *wrapped_bus, struct pci_dev_wrapped *wrapped_parent)
-{
-	struct list_head *ln;
-	struct pci_dev *dev;
-	struct pci_dev_wrapped wrapped_dev;
-	int result = 0;
-
-	pr_debug("PCI: Scanning bus %04x:%02x\n", pci_domain_nr(wrapped_bus->bus),
-		wrapped_bus->bus->number);
-
-	if (fn->pre_visit_pci_bus) {
-		result = fn->pre_visit_pci_bus(wrapped_bus, wrapped_parent);
-		if (result)
-			return result;
-	}
-
-	ln = wrapped_bus->bus->devices.next; 
-	while (ln != &wrapped_bus->bus->devices) {
-		dev = pci_dev_b(ln);
-		ln = ln->next;
-
-		memset(&wrapped_dev, 0, sizeof(struct pci_dev_wrapped));
-		wrapped_dev.dev = dev;
-
-		result = pci_visit_dev(fn, &wrapped_dev, wrapped_bus);
-		if (result)
-			return result;
-	}
-
-	if (fn->post_visit_pci_bus)
-		result = fn->post_visit_pci_bus(wrapped_bus, wrapped_parent);
-
-	return result;
-}
-
-static int pci_visit_bridge (struct pci_visit * fn,
-			     struct pci_dev_wrapped *wrapped_dev,
-			     struct pci_bus_wrapped *wrapped_parent)
-{
-	struct pci_bus *bus;
-	struct pci_bus_wrapped wrapped_bus;
-	int result = 0;
-
-	pr_debug("PCI: Scanning bridge %s\n", pci_name(wrapped_dev->dev));
-
-	if (fn->visit_pci_dev) {
-		result = fn->visit_pci_dev(wrapped_dev, wrapped_parent);
-		if (result)
-			return result;
-	}
-
-	bus = wrapped_dev->dev->subordinate;
-	if (bus) {
-		memset(&wrapped_bus, 0, sizeof(struct pci_bus_wrapped));
-		wrapped_bus.bus = bus;
-
-		result = pci_visit_bus(fn, &wrapped_bus, wrapped_dev);
-	}
-	return result;
-}
-
-/**
- * pci_visit_dev - scans the pci buses.
- * @fn: callback functions that are called while visiting
- * @wrapped_dev: the device to scan
- * @wrapped_parent: the bus where @wrapped_dev is connected to
- *
- * Every bus and every function is presented to a custom
- * function that can act upon it.
- */
-int pci_visit_dev(struct pci_visit *fn, struct pci_dev_wrapped *wrapped_dev,
-		  struct pci_bus_wrapped *wrapped_parent)
-{
-	struct pci_dev* dev = wrapped_dev ? wrapped_dev->dev : NULL;
-	int result = 0;
-
-	if (!dev)
-		return 0;
-
-	if (fn->pre_visit_pci_dev) {
-		result = fn->pre_visit_pci_dev(wrapped_dev, wrapped_parent);
-		if (result)
-			return result;
-	}
-
-	switch (dev->class >> 8) {
-		case PCI_CLASS_BRIDGE_PCI:
-			result = pci_visit_bridge(fn, wrapped_dev,
-						  wrapped_parent);
-			if (result)
-				return result;
-			break;
-		default:
-			pr_debug("PCI: Scanning device %s\n", pci_name(dev));
-			if (fn->visit_pci_dev) {
-				result = fn->visit_pci_dev (wrapped_dev,
-							    wrapped_parent);
-				if (result)
-					return result;
-			}
-	}
-
-	if (fn->post_visit_pci_dev)
-		result = fn->post_visit_pci_dev(wrapped_dev, wrapped_parent);
-
-	return result;
-}
-EXPORT_SYMBOL(pci_visit_dev);

drivers/pci/hotplug/cpci_hotplug.h

@@ -31,7 +31,7 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 
-/* PICMG 2.12 R2.0 HS CSR bits: */
+/* PICMG 2.1 R2.0 HS CSR bits: */
 #define HS_CSR_INS	0x0080
 #define HS_CSR_EXT	0x0040
 #define HS_CSR_PI	0x0030

drivers/pci/hotplug/cpci_hotplug_core.c

@@ -33,11 +33,11 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/smp_lock.h>
+#include <asm/atomic.h>
 #include <linux/delay.h>
 #include "pci_hotplug.h"
 #include "cpci_hotplug.h"
 
-#define DRIVER_VERSION	"0.2"
 #define DRIVER_AUTHOR	"Scott Murray <scottm@somanetworks.com>"
 #define DRIVER_DESC	"CompactPCI Hot Plug Core"
 
@@ -54,9 +54,10 @@
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
 
 /* local variables */
-static spinlock_t list_lock;
+static DECLARE_RWSEM(list_rwsem);
 static LIST_HEAD(slot_list);
 static int slots;
+static atomic_t extracting;
 int cpci_debug;
 static struct cpci_hp_controller *controller;
 static struct semaphore event_semaphore;	/* mutex for process loop (up if something to process) */
@@ -68,6 +69,8 @@ static int disable_slot(struct hotplug_slot *slot);
 static int set_attention_status(struct hotplug_slot *slot, u8 value);
 static int get_power_status(struct hotplug_slot *slot, u8 * value);
 static int get_attention_status(struct hotplug_slot *slot, u8 * value);
+static int get_adapter_status(struct hotplug_slot *slot, u8 * value);
+static int get_latch_status(struct hotplug_slot *slot, u8 * value);
 
 static struct hotplug_slot_ops cpci_hotplug_slot_ops = {
 	.owner = THIS_MODULE,
@@ -76,6 +79,8 @@ static struct hotplug_slot_ops cpci_hotplug_slot_ops = {
 	.set_attention_status = set_attention_status,
 	.get_power_status = get_power_status,
 	.get_attention_status = get_attention_status,
+	.get_adapter_status = get_adapter_status,
+	.get_latch_status = get_latch_status,
 };
 
 static int
@@ -148,8 +153,10 @@ disable_slot(struct hotplug_slot *hotplug_slot)
 		warn("failure to update adapter file");
 	}
 
-	slot->extracting = 0;
-
+	if(slot->extracting) {
+		slot->extracting = 0;
+		atomic_dec(&extracting);
+	}
 	return retval;
 }
 
@@ -188,6 +195,20 @@ set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
 	return cpci_set_attention_status(hotplug_slot->private, status);
 }
 
+static int
+get_adapter_status(struct hotplug_slot *hotplug_slot, u8 * value)
+{
+	*value = hotplug_slot->info->adapter_status;
+	return 0;
+}
+
+static int
+get_latch_status(struct hotplug_slot *hotplug_slot, u8 * value)
+{
+	*value = hotplug_slot->info->latch_status;
+	return 0;
+}
+
 static void release_slot(struct hotplug_slot *hotplug_slot)
 {
 	struct slot *slot = hotplug_slot->private;
@@ -273,10 +294,10 @@ cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last)
 		}
 
 		/* Add slot to our internal list */
-		spin_lock(&list_lock);
+		down_write(&list_rwsem);
 		list_add(&slot->slot_list, &slot_list);
 		slots++;
-		spin_unlock(&list_lock);
+		up_write(&list_rwsem);
 	}
 	return 0;
 error_name:
@@ -299,9 +320,9 @@ cpci_hp_unregister_bus(struct pci_bus *bus)
 	struct list_head *next;
 	int status;
 
-	spin_lock(&list_lock);
+	down_write(&list_rwsem);
 	if(!slots) {
-		spin_unlock(&list_lock);
+		up_write(&list_rwsem);
 		return -1;
 	}
 	list_for_each_safe(tmp, next, &slot_list) {
@@ -319,7 +340,7 @@ cpci_hp_unregister_bus(struct pci_bus *bus)
 			slots--;
 		}
 	}
-	spin_unlock(&list_lock);
+	up_write(&list_rwsem);
 	return 0;
 }
 
@@ -347,7 +368,7 @@ cpci_hp_intr(int irq, void *data, struct pt_regs *regs)
 }
 
 /*
- * According to PICMG 2.12 R2.0, section 6.3.2, upon
+ * According to PICMG 2.1 R2.0, section 6.3.2, upon
  * initialization, the system driver shall clear the
  * INS bits of the cold-inserted devices.
  */
@@ -359,9 +380,9 @@ init_slots(void)
 	struct pci_dev* dev;
 
 	dbg("%s - enter", __FUNCTION__);
-	spin_lock(&list_lock);
+	down_read(&list_rwsem);
 	if(!slots) {
-		spin_unlock(&list_lock);
+		up_read(&list_rwsem);
 		return -1;
 	}
 	list_for_each(tmp, &slot_list) {
@@ -386,7 +407,7 @@ init_slots(void)
 			}
 		}
 	}
-	spin_unlock(&list_lock);
+	up_read(&list_rwsem);
 	dbg("%s - exit", __FUNCTION__);
 	return 0;
 }
@@ -398,10 +419,11 @@ check_slots(void)
 	struct list_head *tmp;
 	int extracted;
 	int inserted;
+	u16 hs_csr;
 
-	spin_lock(&list_lock);
+	down_read(&list_rwsem);
 	if(!slots) {
-		spin_unlock(&list_lock);
+		up_read(&list_rwsem);
 		err("no slots registered, shutting down");
 		return -1;
 	}
@@ -411,8 +433,6 @@ check_slots(void)
 		dbg("%s - looking at slot %s",
 		    __FUNCTION__, slot->hotplug_slot->name);
 		if(cpci_check_and_clear_ins(slot)) {
-			u16 hs_csr;
-
 			/* Some broken hardware (e.g. PLX 9054AB) asserts ENUM# twice... */
 			if(slot->dev) {
 				warn("slot %s already inserted", slot->hotplug_slot->name);
@@ -462,8 +482,6 @@ check_slots(void)
 
 			inserted++;
 		} else if(cpci_check_ext(slot)) {
-			u16 hs_csr;
-
 			/* Process extraction request */
 			dbg("%s - slot %s extracted",
 			    __FUNCTION__, slot->hotplug_slot->name);
@@ -476,20 +494,40 @@ check_slots(void)
 			if(!slot->extracting) {
 				if(update_latch_status(slot->hotplug_slot, 0)) {
 					warn("failure to update latch file");
+
 				}
+				atomic_inc(&extracting);
 				slot->extracting = 1;
 			}
 			extracted++;
+		} else if(slot->extracting) {
+			hs_csr = cpci_get_hs_csr(slot);
+			if(hs_csr == 0xffff) {
+				/*
+				 * Hmmm, we're likely hosed at this point, should we
+				 * bother trying to tell the driver or not?
+				 */
+				err("card in slot %s was improperly removed",
+				    slot->hotplug_slot->name);
+				if(update_adapter_status(slot->hotplug_slot, 0)) {
+					warn("failure to update adapter file");
+				}
+				slot->extracting = 0;
+				atomic_dec(&extracting);
+			}
 		}
 	}
-	spin_unlock(&list_lock);
+	up_read(&list_rwsem);
+	dbg("inserted=%d, extracted=%d, extracting=%d",
+	    inserted, extracted, atomic_read(&extracting));
 	if(inserted || extracted) {
 		return extracted;
 	}
-	else {
+	else if(!atomic_read(&extracting)) {
 		err("cannot find ENUM# source, shutting down");
 		return -1;
 	}
+	return 0;
 }
 
 /* This is the interrupt mode worker thread body */
@@ -497,8 +535,6 @@ static int
 event_thread(void *data)
 {
 	int rc;
-	struct slot *slot;
-	struct list_head *tmp;
 
 	lock_kernel();
 	daemonize("cpci_hp_eventd");
@@ -512,39 +548,22 @@ event_thread(void *data)
 		    thread_finished);
 		if(thread_finished || signal_pending(current))
 			break;
-		while(controller->ops->query_enum()) {
+		do {
 			rc = check_slots();
-			if (rc > 0)
+			if (rc > 0) {
 				/* Give userspace a chance to handle extraction */
 				msleep(500);
-			else if (rc < 0) {
+			} else if (rc < 0) {
 				dbg("%s - error checking slots", __FUNCTION__);
 				thread_finished = 1;
 				break;
 			}
-		}
-		/* Check for someone yanking out a board */
-		list_for_each(tmp, &slot_list) {
-			slot = list_entry(tmp, struct slot, slot_list);
-			if(slot->extracting) {
-				/*
-				 * Hmmm, we're likely hosed at this point, should we
-				 * bother trying to tell the driver or not?
-				 */
-				err("card in slot %s was improperly removed",
-				    slot->hotplug_slot->name);
-				if(update_adapter_status(slot->hotplug_slot, 0)) {
-					warn("failure to update adapter file");
-				}
-				slot->extracting = 0;
-			}
-		}
+		} while(atomic_read(&extracting) != 0);
 
 		/* Re-enable ENUM# interrupt */
 		dbg("%s - re-enabling irq", __FUNCTION__);
 		controller->ops->enable_irq();
 	}
-
 	dbg("%s - event thread signals exit", __FUNCTION__);
 	up(&thread_exit);
 	return 0;
@@ -555,8 +574,6 @@ static int
 poll_thread(void *data)
 {
 	int rc;
-	struct slot *slot;
-	struct list_head *tmp;
 
 	lock_kernel();
 	daemonize("cpci_hp_polld");
@@ -565,35 +582,19 @@ poll_thread(void *data)
 	while(1) {
 		if(thread_finished || signal_pending(current))
 			break;
-
-		while(controller->ops->query_enum()) {
-			rc = check_slots();
-			if(rc > 0)
-				/* Give userspace a chance to handle extraction */
-				msleep(500);
-			else if (rc < 0) {
-				dbg("%s - error checking slots", __FUNCTION__);
-				thread_finished = 1;
-				break;
-			}
-		}
-		/* Check for someone yanking out a board */
-		list_for_each(tmp, &slot_list) {
-			slot = list_entry(tmp, struct slot, slot_list);
-			if(slot->extracting) {
-				/*
-				 * Hmmm, we're likely hosed at this point, should we
-				 * bother trying to tell the driver or not?
-				 */
-				err("card in slot %s was improperly removed",
-				    slot->hotplug_slot->name);
-				if(update_adapter_status(slot->hotplug_slot, 0)) {
-					warn("failure to update adapter file");
+		if(controller->ops->query_enum()) {
+			do {
+				rc = check_slots();
+				if(rc > 0) {
+					/* Give userspace a chance to handle extraction */
+					msleep(500);
+				} else if(rc < 0) {
+					dbg("%s - error checking slots", __FUNCTION__);
+					thread_finished = 1;
+					break;
 				}
-				slot->extracting = 0;
-			}
+			} while(atomic_read(&extracting) != 0);
 		}
-
 		msleep(100);
 	}
 	dbg("poll thread signals exit");
@@ -667,6 +668,9 @@ cpci_hp_unregister_controller(struct cpci_hp_controller *old_controller)
 	int status = 0;
 
 	if(controller) {
+		if(atomic_read(&extracting) != 0) {
+			return -EBUSY;
+		}
 		if(!thread_finished) {
 			cpci_stop_thread();
 		}
@@ -691,12 +695,12 @@ cpci_hp_start(void)
 		return -ENODEV;
 	}
 
-	spin_lock(&list_lock);
-	if(!slots) {
-		spin_unlock(&list_lock);
+	down_read(&list_rwsem);
+	if(list_empty(&slot_list)) {
+		up_read(&list_rwsem);
 		return -ENODEV;
 	}
-	spin_unlock(&list_lock);
+	up_read(&list_rwsem);
 
 	if(first) {
 		status = init_slots();
@@ -727,7 +731,9 @@ cpci_hp_stop(void)
 	if(!controller) {
 		return -ENODEV;
 	}
-
+	if(atomic_read(&extracting) != 0) {
+		return -EBUSY;
+	}
 	if(controller->irq) {
 		/* Stop enum interrupt processing */
 		dbg("%s - disabling irq", __FUNCTION__);
@@ -747,7 +753,7 @@ cleanup_slots(void)
 	 * Unregister all of our slots with the pci_hotplug subsystem,
 	 * and free up all memory that we had allocated.
 	 */
-	spin_lock(&list_lock);
+	down_write(&list_rwsem);
 	if(!slots) {
 		goto null_cleanup;
 	}
@@ -761,17 +767,14 @@ cleanup_slots(void)
 		kfree(slot);
 	}
       null_cleanup:
-	spin_unlock(&list_lock);
+	up_write(&list_rwsem);
 	return;
 }
 
 int __init
 cpci_hotplug_init(int debug)
 {
-	spin_lock_init(&list_lock);
 	cpci_debug = debug;
-
-	info(DRIVER_DESC " version: " DRIVER_VERSION);
 	return 0;
 }
 

drivers/pci/hotplug/pciehp.h

@@ -130,6 +130,7 @@ struct controller {
 	u8 slot_bus;		/* Bus where the slots handled by this controller sit */
 	u8 ctrlcap;
 	u16 vendor_id;
+	u8 cap_base;
 };
 
 struct irq_mapping {

drivers/pci/hotplug/pciehp_core.c

@@ -607,7 +607,7 @@ static int pciehp_resume (struct pcie_device *dev)
 static struct pcie_port_service_id port_pci_ids[] = { { 
 	.vendor = PCI_ANY_ID, 
 	.device = PCI_ANY_ID,
-	.port_type = PCIE_RC_PORT, 
+	.port_type = PCIE_ANY_PORT,
 	.service_type = PCIE_PORT_SERVICE_HP,
 	.driver_data =	0, 
 	}, { /* end: all zeroes */ }

drivers/pci/hotplug/shpchp_core.c

@@ -95,7 +95,7 @@ static struct hotplug_slot_ops shpchp_hotplug_slot_ops = {
  */
 static void release_slot(struct hotplug_slot *hotplug_slot)
 {
-	struct slot *slot = (struct slot *)hotplug_slot->private;
+	struct slot *slot = hotplug_slot->private;
 
 	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
 

drivers/pci/hotplug/shpchp_ctrl.c

@@ -1885,7 +1885,7 @@ int shpchp_enable_slot (struct slot *p_slot)
 	func = shpchp_slot_find(p_slot->bus, p_slot->device, 0);
 	if (!func) {
 		dbg("%s: Error! slot NULL\n", __FUNCTION__);
-		return 1;
+		return -ENODEV;
 	}
 
 	/* Check to see if (latch closed, card present, power off) */
@@ -1894,19 +1894,19 @@ int shpchp_enable_slot (struct slot *p_slot)
 	if (rc || !getstatus) {
 		info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
 		up(&p_slot->ctrl->crit_sect);
-		return 1;
+		return -ENODEV;
 	}
 	rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
 	if (rc || getstatus) {
 		info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
 		up(&p_slot->ctrl->crit_sect);
-		return 1;
+		return -ENODEV;
 	}
 	rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
 	if (rc || getstatus) {
 		info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number);
 		up(&p_slot->ctrl->crit_sect);
-		return 1;
+		return -ENODEV;
 	}
 	up(&p_slot->ctrl->crit_sect);
 
@@ -1914,7 +1914,7 @@ int shpchp_enable_slot (struct slot *p_slot)
 
 	func = shpchp_slot_create(p_slot->bus);
 	if (func == NULL)
-		return 1;
+		return -ENOMEM;
 
 	func->bus = p_slot->bus;
 	func->device = p_slot->device;
@@ -1939,7 +1939,7 @@ int shpchp_enable_slot (struct slot *p_slot)
 		/* Setup slot structure with entry for empty slot */
 		func = shpchp_slot_create(p_slot->bus);
 		if (func == NULL)
-			return (1);	/* Out of memory */
+			return -ENOMEM;	/* Out of memory */
 
 		func->bus = p_slot->bus;
 		func->device = p_slot->device;
@@ -1972,7 +1972,7 @@ int shpchp_disable_slot (struct slot *p_slot)
 	struct pci_func *func;
 
 	if (!p_slot->ctrl)
-		return 1;
+		return -ENODEV;
 
 	pci_bus = p_slot->ctrl->pci_dev->subordinate;
 
@@ -1983,19 +1983,19 @@ int shpchp_disable_slot (struct slot *p_slot)
 	if (ret || !getstatus) {
 		info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
 		up(&p_slot->ctrl->crit_sect);
-		return 1;
+		return -ENODEV;
 	}
 	ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
 	if (ret || getstatus) {
 		info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
 		up(&p_slot->ctrl->crit_sect);
-		return 1;
+		return -ENODEV;
 	}
 	ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
 	if (ret || !getstatus) {
 		info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number);
 		up(&p_slot->ctrl->crit_sect);
-		return 1;
+		return -ENODEV;
 	}
 	up(&p_slot->ctrl->crit_sect);
 
@@ -2011,7 +2011,7 @@ int shpchp_disable_slot (struct slot *p_slot)
 		/* Check the Class Code */
 		rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
 		if (rc)
-			return rc;
+			return -ENODEV;
 
 		if (class_code == PCI_BASE_CLASS_DISPLAY) {
 			/* Display/Video adapter (not supported) */
@@ -2020,13 +2020,13 @@ int shpchp_disable_slot (struct slot *p_slot)
 			/* See if it's a bridge */
 			rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
 			if (rc)
-				return rc;
+				return -ENODEV;
 
 			/* If it's a bridge, check the VGA Enable bit */
 			if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
 				rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR);
 				if (rc)
-					return rc;
+					return -ENODEV;
 
 				/* If the VGA Enable bit is set, remove isn't supported */
 				if (BCR & PCI_BRIDGE_CTL_VGA) {
@@ -2042,12 +2042,12 @@ int shpchp_disable_slot (struct slot *p_slot)
 	if ((func != NULL) && !rc) {
 		rc = remove_board(func, p_slot->ctrl);
 	} else if (!rc)
-		rc = 1;
+		rc = -ENODEV;
 
 	if (p_slot)
 		update_slot_info(p_slot);
 
-	return(rc);
+	return rc;
 }
 
 

drivers/pci/pci-sysfs.c

@@ -73,6 +73,17 @@ resource_show(struct device * dev, char * buf)
 	return (str - buf);
 }
 
+static ssize_t modalias_show(struct device *dev, char *buf)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+
+	return sprintf(buf, "pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x\n",
+		       pci_dev->vendor, pci_dev->device,
+		       pci_dev->subsystem_vendor, pci_dev->subsystem_device,
+		       (u8)(pci_dev->class >> 16), (u8)(pci_dev->class >> 8),
+		       (u8)(pci_dev->class));
+}
+
 struct device_attribute pci_dev_attrs[] = {
 	__ATTR_RO(resource),
 	__ATTR_RO(vendor),
@@ -82,6 +93,7 @@ struct device_attribute pci_dev_attrs[] = {
 	__ATTR_RO(class),
 	__ATTR_RO(irq),
 	__ATTR_RO(local_cpus),
+	__ATTR_RO(modalias),
 	__ATTR_NULL,
 };
 

drivers/pci/pci.h

@@ -32,33 +32,6 @@ extern unsigned char pci_max_busnr(void);
 extern unsigned char pci_bus_max_busnr(struct pci_bus *bus);
 extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap);
 
-struct pci_dev_wrapped {
-	struct pci_dev	*dev;
-	void		*data;
-};
-
-struct pci_bus_wrapped {
-	struct pci_bus	*bus;
-	void		*data;
-};
-
-struct pci_visit {
-	int (* pre_visit_pci_bus)	(struct pci_bus_wrapped *,
-					 struct pci_dev_wrapped *);
-	int (* post_visit_pci_bus)	(struct pci_bus_wrapped *,
-					 struct pci_dev_wrapped *);
-
-	int (* pre_visit_pci_dev)	(struct pci_dev_wrapped *,
-					 struct pci_bus_wrapped *);
-	int (* visit_pci_dev)		(struct pci_dev_wrapped *,
-					 struct pci_bus_wrapped *);
-	int (* post_visit_pci_dev)	(struct pci_dev_wrapped *,
-					 struct pci_bus_wrapped *);
-};
-
-extern int pci_visit_dev(struct pci_visit *fn,
-			 struct pci_dev_wrapped *wrapped_dev,
-			 struct pci_bus_wrapped *wrapped_parent);
 extern void pci_remove_legacy_files(struct pci_bus *bus);
 
 /* Lock for read/write access to pci device and bus lists */

drivers/pci/pcie/portdrv_bus.c

@@ -39,7 +39,8 @@ static int pcie_port_bus_match(struct device *dev, struct device_driver *drv)
 		driver->id_table->vendor != pciedev->id.vendor) ||
 	       (driver->id_table->device != PCI_ANY_ID &&
 		driver->id_table->device != pciedev->id.device) ||	
-		driver->id_table->port_type != pciedev->id.port_type ||
+	       (driver->id_table->port_type != PCIE_ANY_PORT &&
+		driver->id_table->port_type != pciedev->id.port_type) ||
 		driver->id_table->service_type != pciedev->id.service_type )
 		return 0;
 

fs/ext3/super.c

@@ -225,8 +225,16 @@ void __ext3_std_error (struct super_block * sb, const char * function,
 		       int errno)
 {
 	char nbuf[16];
-	const char *errstr = ext3_decode_error(sb, errno, nbuf);
+	const char *errstr;
+
+	/* Special case: if the error is EROFS, and we're not already
+	 * inside a transaction, then there's really no point in logging
+	 * an error. */
+	if (errno == -EROFS && journal_current_handle() == NULL &&
+	    (sb->s_flags & MS_RDONLY))
+		return;
 
+	errstr = ext3_decode_error(sb, errno, nbuf);
 	printk (KERN_CRIT "EXT3-fs error (device %s) in %s: %s\n",
 		sb->s_id, function, errstr);
 

include/linux/device.h

@@ -273,9 +273,6 @@ struct device {
 					   BIOS data relevant to device) */
 	struct dev_pm_info	power;
 
-	u32		detach_state;	/* State to enter when device is
-					   detached from its driver. */
-
 	u64		*dma_mask;	/* dma mask (if dma'able device) */
 	u64		coherent_dma_mask;/* Like dma_mask, but for
 					     alloc_coherent mappings as

kernel/power/main.c

@@ -156,14 +156,14 @@ static int enter_state(suspend_state_t state)
 		goto Unlock;
 	}
 
-	pr_debug("PM: Preparing system for suspend\n");
+	pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
 	if ((error = suspend_prepare(state)))
 		goto Unlock;
 
-	pr_debug("PM: Entering state.\n");
+	pr_debug("PM: Entering %s sleep\n", pm_states[state]);
 	error = suspend_enter(state);
 
-	pr_debug("PM: Finishing up.\n");
+	pr_debug("PM: Finishing wakeup.\n");
 	suspend_finish(state);
  Unlock:
 	up(&pm_sem);

mm/mmap.c

@@ -1244,7 +1244,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 	addr = mm->free_area_cache;
 
 	/* make sure it can fit in the remaining address space */
-	if (addr >= len) {
+	if (addr > len) {
 		vma = find_vma(mm, addr-len);
 		if (!vma || addr <= vma->vm_start)
 			/* remember the address as a hint for next time */
@@ -1266,7 +1266,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 
 		/* try just below the current vma->vm_start */
 		addr = vma->vm_start-len;
-	} while (len <= vma->vm_start);
+	} while (len < vma->vm_start);
 
 	/*
 	 * A failed mmap() very likely causes application failure,