IB/mlx4: Add support for setting RoCEv2 gids in hardware

To tell hardware about a gid with type RoCEv2, software needs a new
modifier to the SET_PORT command: MLX4_SET_PORT_ROCE_ADDR. This can
replace the old method, MLX4_SET_PORT_GID_TABLE, for  RoCEv1 gids.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

drivers/infiniband/hw/mlx4/main.c

@@ -154,9 +154,9 @@ static struct net_device *mlx4_ib_get_netdev(struct ib_device *device, u8 port_n
 	return dev;
 }
 
-static int mlx4_ib_update_gids(struct gid_entry *gids,
-			       struct mlx4_ib_dev *ibdev,
-			       u8 port_num)
+static int mlx4_ib_update_gids_v1(struct gid_entry *gids,
+				  struct mlx4_ib_dev *ibdev,
+				  u8 port_num)
 {
 	struct mlx4_cmd_mailbox *mailbox;
 	int err;
@@ -187,6 +187,63 @@ static int mlx4_ib_update_gids(struct gid_entry *gids,
 	return err;
 }
 
+static int mlx4_ib_update_gids_v1_v2(struct gid_entry *gids,
+				     struct mlx4_ib_dev *ibdev,
+				     u8 port_num)
+{
+	struct mlx4_cmd_mailbox *mailbox;
+	int err;
+	struct mlx4_dev *dev = ibdev->dev;
+	int i;
+	struct {
+		union ib_gid	gid;
+		__be32		rsrvd1[2];
+		__be16		rsrvd2;
+		u8		type;
+		u8		version;
+		__be32		rsrvd3;
+	} *gid_tbl;
+
+	mailbox = mlx4_alloc_cmd_mailbox(dev);
+	if (IS_ERR(mailbox))
+		return -ENOMEM;
+
+	gid_tbl = mailbox->buf;
+	for (i = 0; i < MLX4_MAX_PORT_GIDS; ++i) {
+		memcpy(&gid_tbl[i].gid, &gids[i].gid, sizeof(union ib_gid));
+		if (gids[i].gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP) {
+			gid_tbl[i].version = 2;
+			if (!ipv6_addr_v4mapped((struct in6_addr *)&gids[i].gid))
+				gid_tbl[i].type = 1;
+			else
+				memset(&gid_tbl[i].gid, 0, 12);
+		}
+	}
+
+	err = mlx4_cmd(dev, mailbox->dma,
+		       MLX4_SET_PORT_ROCE_ADDR << 8 | port_num,
+		       1, MLX4_CMD_SET_PORT, MLX4_CMD_TIME_CLASS_B,
+		       MLX4_CMD_WRAPPED);
+	if (mlx4_is_bonded(dev))
+		err += mlx4_cmd(dev, mailbox->dma,
+				MLX4_SET_PORT_ROCE_ADDR << 8 | 2,
+				1, MLX4_CMD_SET_PORT, MLX4_CMD_TIME_CLASS_B,
+				MLX4_CMD_WRAPPED);
+
+	mlx4_free_cmd_mailbox(dev, mailbox);
+	return err;
+}
+
+static int mlx4_ib_update_gids(struct gid_entry *gids,
+			       struct mlx4_ib_dev *ibdev,
+			       u8 port_num)
+{
+	if (ibdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_ROCE_V1_V2)
+		return mlx4_ib_update_gids_v1_v2(gids, ibdev, port_num);
+
+	return mlx4_ib_update_gids_v1(gids, ibdev, port_num);
+}
+
 static int mlx4_ib_add_gid(struct ib_device *device,
 			   u8 port_num,
 			   unsigned int index,

include/linux/mlx4/cmd.h

@@ -206,7 +206,8 @@ enum {
 	MLX4_SET_PORT_GID_TABLE = 0x5,
 	MLX4_SET_PORT_PRIO2TC	= 0x8,
 	MLX4_SET_PORT_SCHEDULER = 0x9,
-	MLX4_SET_PORT_VXLAN	= 0xB
+	MLX4_SET_PORT_VXLAN	= 0xB,
+	MLX4_SET_PORT_ROCE_ADDR	= 0xD
 };
 
 enum {