Commit 7e8275c2 authored by Libin Yang's avatar Libin Yang Committed by Takashi Iwai

drm/i915: set proper N/CTS in modeset

When modeset occurs and the TMDS frequency is set to some
speical values, the N/CTS need to be set manually if audio
is playing.
Signed-off-by: default avatarLibin Yang <libin.yang@intel.com>
Reviewed-by: default avatarJani Nikula <jani.nikula@intel.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent ddd621fb
......@@ -128,6 +128,20 @@ static int audio_config_get_n(const struct drm_display_mode *mode, int rate)
return 0;
}
static uint32_t audio_config_setup_n_reg(int n, uint32_t val)
{
int n_low, n_up;
uint32_t tmp = val;
n_low = n & 0xfff;
n_up = (n >> 12) & 0xff;
tmp &= ~(AUD_CONFIG_UPPER_N_MASK | AUD_CONFIG_LOWER_N_MASK);
tmp |= ((n_up << AUD_CONFIG_UPPER_N_SHIFT) |
(n_low << AUD_CONFIG_LOWER_N_SHIFT) |
AUD_CONFIG_N_PROG_ENABLE);
return tmp;
}
/* check whether N/CTS/M need be set manually */
static bool audio_rate_need_prog(struct intel_crtc *crtc,
struct drm_display_mode *mode)
......@@ -262,9 +276,14 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
struct drm_i915_private *dev_priv = connector->dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
enum pipe pipe = intel_crtc->pipe;
struct i915_audio_component *acomp = dev_priv->audio_component;
const uint8_t *eld = connector->eld;
struct intel_digital_port *intel_dig_port =
enc_to_dig_port(&encoder->base);
enum port port = intel_dig_port->port;
uint32_t tmp;
int len, i;
int n, rate;
DRM_DEBUG_KMS("Enable audio codec on pipe %c, %u bytes ELD\n",
pipe_name(pipe), drm_eld_size(eld));
......@@ -302,12 +321,29 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
/* Enable timestamps */
tmp = I915_READ(HSW_AUD_CFG(pipe));
tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK;
if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
tmp |= AUD_CONFIG_N_VALUE_INDEX;
else
tmp |= audio_config_hdmi_pixel_clock(mode);
tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
if (audio_rate_need_prog(intel_crtc, mode)) {
if (!acomp)
rate = 0;
else if (port >= PORT_A && port <= PORT_E)
rate = acomp->aud_sample_rate[port];
else {
DRM_ERROR("invalid port: %d\n", port);
rate = 0;
}
n = audio_config_get_n(mode, rate);
if (n != 0)
tmp = audio_config_setup_n_reg(n, tmp);
else
DRM_DEBUG_KMS("no suitable N value is found\n");
}
I915_WRITE(HSW_AUD_CFG(pipe), tmp);
mutex_unlock(&dev_priv->av_mutex);
......@@ -594,9 +630,10 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
struct intel_digital_port *intel_dig_port;
struct intel_crtc *crtc;
struct drm_display_mode *mode;
struct i915_audio_component *acomp = dev_priv->audio_component;
enum pipe pipe = -1;
u32 tmp;
int n_low, n_up, n;
int n;
/* HSW, BDW SKL need this fix */
if (!IS_SKYLAKE(dev_priv) &&
......@@ -630,6 +667,9 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
pipe_name(pipe), port_name(port));
mode = &crtc->config->base.adjusted_mode;
/* port must be valid now, otherwise the pipe will be invalid */
acomp->aud_sample_rate[port] = rate;
/* 2. check whether to set the N/CTS/M manually or not */
if (!audio_rate_need_prog(crtc, mode)) {
tmp = I915_READ(HSW_AUD_CFG(pipe));
......@@ -649,15 +689,10 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
mutex_unlock(&dev_priv->av_mutex);
return 0;
}
n_low = n & 0xfff;
n_up = (n >> 12) & 0xff;
/* 4. set the N/CTS/M */
/* 3. set the N/CTS/M */
tmp = I915_READ(HSW_AUD_CFG(pipe));
tmp &= ~(AUD_CONFIG_UPPER_N_MASK | AUD_CONFIG_LOWER_N_MASK);
tmp |= ((n_up << AUD_CONFIG_UPPER_N_SHIFT) |
(n_low << AUD_CONFIG_LOWER_N_SHIFT) |
AUD_CONFIG_N_PROG_ENABLE);
tmp = audio_config_setup_n_reg(n, tmp);
I915_WRITE(HSW_AUD_CFG(pipe), tmp);
mutex_unlock(&dev_priv->av_mutex);
......@@ -678,6 +713,7 @@ static int i915_audio_component_bind(struct device *i915_dev,
{
struct i915_audio_component *acomp = data;
struct drm_i915_private *dev_priv = dev_to_i915(i915_dev);
int i;
if (WARN_ON(acomp->ops || acomp->dev))
return -EEXIST;
......@@ -685,6 +721,9 @@ static int i915_audio_component_bind(struct device *i915_dev,
drm_modeset_lock_all(dev_priv->dev);
acomp->ops = &i915_audio_component_ops;
acomp->dev = i915_dev;
BUILD_BUG_ON(MAX_PORTS != I915_MAX_PORTS);
for (i = 0; i < ARRAY_SIZE(acomp->aud_sample_rate); i++)
acomp->aud_sample_rate[i] = 0;
dev_priv->audio_component = acomp;
drm_modeset_unlock_all(dev_priv->dev);
......
......@@ -24,8 +24,18 @@
#ifndef _I915_COMPONENT_H_
#define _I915_COMPONENT_H_
/* MAX_PORT is the number of port
* It must be sync with I915_MAX_PORTS defined i915_drv.h
* 5 should be enough as only HSW, BDW, SKL need such fix.
*/
#define MAX_PORTS 5
struct i915_audio_component {
struct device *dev;
/**
* @aud_sample_rate: the array of audio sample rate per port
*/
int aud_sample_rate[MAX_PORTS];
const struct i915_audio_component_ops {
struct module *owner;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment