[ARM] 3478/1: SharpSL SCOOP: Fix potenial build failure

Patch from Richard Purdie

Move platform_scoop_config from the SharpSL scoop PCMCIA driver to
the SCOOP driver. This avoids build failures when PCMCIA is not built
or is modular (scoop.c itself cannot be modular).
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/common/scoop.c

@@ -18,6 +18,18 @@
 #include <asm/io.h>
 #include <asm/hardware/scoop.h>
 
+/* PCMCIA to Scoop linkage
+
+   There is no easy way to link multiple scoop devices into one
+   single entity for the pxa2xx_pcmcia device so this structure
+   is used which is setup by the platform code.
+
+   This file is never modular so this symbol is always
+   accessile to the board support files.
+*/
+struct scoop_pcmcia_config *platform_scoop_config;
+EXPORT_SYMBOL(platform_scoop_config);
+
 #define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr)))
 
 struct  scoop_dev {

drivers/pcmcia/pxa2xx_sharpsl.c

@@ -26,14 +26,6 @@
 #include "soc_common.h"
 
 #define	NO_KEEP_VS 0x0001
-
-/* PCMCIA to Scoop linkage
-
-   There is no easy way to link multiple scoop devices into one
-   single entity for the pxa2xx_pcmcia device so this structure
-   is used which is setup by the platform code
-*/
-struct scoop_pcmcia_config *platform_scoop_config;
 #define SCOOP_DEV platform_scoop_config->devs
 
 static void sharpsl_pcmcia_init_reset(struct soc_pcmcia_socket *skt)