Commit 7f4d3b52 authored by Masahiro Yamada's avatar Masahiro Yamada Committed by Stephen Boyd

clk: uniphier: add clock data for UniPhier SoCs

Add clock data arrays for all UniPhier SoCs with a binding document.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
parent 734d82f4
UniPhier clock controller
System clock
------------
Required properties:
- compatible: should be one of the following:
"socionext,uniphier-sld3-clock" - for sLD3 SoC.
"socionext,uniphier-ld4-clock" - for LD4 SoC.
"socionext,uniphier-pro4-clock" - for Pro4 SoC.
"socionext,uniphier-sld8-clock" - for sLD8 SoC.
"socionext,uniphier-pro5-clock" - for Pro5 SoC.
"socionext,uniphier-pxs2-clock" - for PXs2/LD6b SoC.
"socionext,uniphier-ld11-clock" - for LD11 SoC.
"socionext,uniphier-ld20-clock" - for LD20 SoC.
- #clock-cells: should be 1.
Example:
sysctrl@61840000 {
compatible = "socionext,uniphier-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x4000>;
clock {
compatible = "socionext,uniphier-ld20-clock";
#clock-cells = <1>;
};
other nodes ...
};
Provided clocks:
8: ST DMAC
12: GIO (Giga bit stream I/O)
14: USB3 ch0 host
15: USB3 ch1 host
16: USB3 ch0 PHY0
17: USB3 ch0 PHY1
20: USB3 ch1 PHY0
21: USB3 ch1 PHY1
Media I/O (MIO) clock
---------------------
Required properties:
- compatible: should be one of the following:
"socionext,uniphier-sld3-mio-clock" - for sLD3 SoC.
"socionext,uniphier-ld4-mio-clock" - for LD4 SoC.
"socionext,uniphier-pro4-mio-clock" - for Pro4 SoC.
"socionext,uniphier-sld8-mio-clock" - for sLD8 SoC.
"socionext,uniphier-pro5-mio-clock" - for Pro5 SoC.
"socionext,uniphier-pxs2-mio-clock" - for PXs2/LD6b SoC.
"socionext,uniphier-ld11-mio-clock" - for LD11 SoC.
"socionext,uniphier-ld20-mio-clock" - for LD20 SoC.
- #clock-cells: should be 1.
Example:
mioctrl@59810000 {
compatible = "socionext,uniphier-mioctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
clock {
compatible = "socionext,uniphier-ld20-mio-clock";
#clock-cells = <1>;
};
other nodes ...
};
Provided clocks:
0: SD ch0 host
1: eMMC host
2: SD ch1 host
7: MIO DMAC
8: USB2 ch0 host
9: USB2 ch1 host
10: USB2 ch2 host
11: USB2 ch3 host
12: USB2 ch0 PHY
13: USB2 ch1 PHY
14: USB2 ch2 PHY
15: USB2 ch3 PHY
Peripheral clock
----------------
Required properties:
- compatible: should be one of the following:
"socionext,uniphier-sld3-peri-clock" - for sLD3 SoC.
"socionext,uniphier-ld4-peri-clock" - for LD4 SoC.
"socionext,uniphier-pro4-peri-clock" - for Pro4 SoC.
"socionext,uniphier-sld8-peri-clock" - for sLD8 SoC.
"socionext,uniphier-pro5-peri-clock" - for Pro5 SoC.
"socionext,uniphier-pxs2-peri-clock" - for PXs2/LD6b SoC.
"socionext,uniphier-ld11-peri-clock" - for LD11 SoC.
"socionext,uniphier-ld20-peri-clock" - for LD20 SoC.
- #clock-cells: should be 1.
Example:
perictrl@59820000 {
compatible = "socionext,uniphier-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
clock {
compatible = "socionext,uniphier-ld20-peri-clock";
#clock-cells = <1>;
};
other nodes ...
};
Provided clocks:
0: UART ch0
1: UART ch1
2: UART ch2
3: UART ch3
4: I2C ch0
5: I2C ch1
6: I2C ch2
7: I2C ch3
8: I2C ch4
9: I2C ch5
10: I2C ch6
......@@ -3,3 +3,6 @@ obj-y += clk-uniphier-fixed-factor.o
obj-y += clk-uniphier-fixed-rate.o
obj-y += clk-uniphier-gate.o
obj-y += clk-uniphier-mux.o
obj-y += clk-uniphier-sys.o
obj-y += clk-uniphier-mio.o
obj-y += clk-uniphier-peri.o
......@@ -109,6 +109,97 @@ static int uniphier_clk_remove(struct platform_device *pdev)
}
static const struct of_device_id uniphier_clk_match[] = {
/* System clock */
{
.compatible = "socionext,uniphier-ld4-clock",
.data = uniphier_ld4_sys_clk_data,
},
{
.compatible = "socionext,uniphier-pro4-clock",
.data = uniphier_pro4_sys_clk_data,
},
{
.compatible = "socionext,uniphier-sld8-clock",
.data = uniphier_sld8_sys_clk_data,
},
{
.compatible = "socionext,uniphier-pro5-clock",
.data = uniphier_pro5_sys_clk_data,
},
{
.compatible = "socionext,uniphier-pxs2-clock",
.data = uniphier_pxs2_sys_clk_data,
},
{
.compatible = "socionext,uniphier-ld11-clock",
.data = uniphier_ld11_sys_clk_data,
},
{
.compatible = "socionext,uniphier-ld20-clock",
.data = uniphier_ld20_sys_clk_data,
},
/* Media I/O clock */
{
.compatible = "socionext,uniphier-sld3-mio-clock",
.data = uniphier_sld3_mio_clk_data,
},
{
.compatible = "socionext,uniphier-ld4-mio-clock",
.data = uniphier_sld3_mio_clk_data,
},
{
.compatible = "socionext,uniphier-pro4-mio-clock",
.data = uniphier_sld3_mio_clk_data,
},
{
.compatible = "socionext,uniphier-sld8-mio-clock",
.data = uniphier_sld3_mio_clk_data,
},
{
.compatible = "socionext,uniphier-pro5-mio-clock",
.data = uniphier_pro5_mio_clk_data,
},
{
.compatible = "socionext,uniphier-pxs2-mio-clock",
.data = uniphier_pro5_mio_clk_data,
},
{
.compatible = "socionext,uniphier-ld11-mio-clock",
.data = uniphier_sld3_mio_clk_data,
},
{
.compatible = "socionext,uniphier-ld20-mio-clock",
.data = uniphier_pro5_mio_clk_data,
},
/* Peripheral clock */
{
.compatible = "socionext,uniphier-ld4-peri-clock",
.data = uniphier_ld4_peri_clk_data,
},
{
.compatible = "socionext,uniphier-pro4-peri-clock",
.data = uniphier_pro4_peri_clk_data,
},
{
.compatible = "socionext,uniphier-sld8-peri-clock",
.data = uniphier_ld4_peri_clk_data,
},
{
.compatible = "socionext,uniphier-pro5-peri-clock",
.data = uniphier_pro4_peri_clk_data,
},
{
.compatible = "socionext,uniphier-pxs2-peri-clock",
.data = uniphier_pro4_peri_clk_data,
},
{
.compatible = "socionext,uniphier-ld11-peri-clock",
.data = uniphier_pro4_peri_clk_data,
},
{
.compatible = "socionext,uniphier-ld20-peri-clock",
.data = uniphier_pro4_peri_clk_data,
},
{ /* sentinel */ }
};
......
/*
* Copyright (C) 2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "clk-uniphier.h"
#define UNIPHIER_MIO_CLK_SD_FIXED \
UNIPHIER_CLK_FACTOR("sd-44m", -1, "sd-133m", 1, 3), \
UNIPHIER_CLK_FACTOR("sd-33m", -1, "sd-200m", 1, 6), \
UNIPHIER_CLK_FACTOR("sd-50m", -1, "sd-200m", 1, 4), \
UNIPHIER_CLK_FACTOR("sd-67m", -1, "sd-200m", 1, 3), \
UNIPHIER_CLK_FACTOR("sd-100m", -1, "sd-200m", 1, 2), \
UNIPHIER_CLK_FACTOR("sd-40m", -1, "sd-200m", 1, 5), \
UNIPHIER_CLK_FACTOR("sd-25m", -1, "sd-200m", 1, 8), \
UNIPHIER_CLK_FACTOR("sd-22m", -1, "sd-133m", 1, 6)
#define UNIPHIER_MIO_CLK_SD(_idx, ch) \
{ \
.name = "sd" #ch "-sel", \
.type = UNIPHIER_CLK_TYPE_MUX, \
.idx = -1, \
.data.mux = { \
.parent_names = { \
"sd-44m", \
"sd-33m", \
"sd-50m", \
"sd-67m", \
"sd-100m", \
"sd-40m", \
"sd-25m", \
"sd-22m", \
}, \
.num_parents = 8, \
.reg = 0x30 + 0x200 * (ch), \
.masks = { \
0x00031000, \
0x00031000, \
0x00031000, \
0x00031000, \
0x00001300, \
0x00001300, \
0x00001300, \
0x00001300, \
}, \
.vals = { \
0x00000000, \
0x00010000, \
0x00020000, \
0x00030000, \
0x00001000, \
0x00001100, \
0x00001200, \
0x00001300, \
}, \
}, \
}, \
UNIPHIER_CLK_GATE("sd" #ch, (_idx), "sd" #ch "-sel", 0x20 + 0x200 * (ch), 8)
#define UNIPHIER_MIO_CLK_USB2(idx, ch) \
UNIPHIER_CLK_GATE("usb2" #ch, (idx), "usb2", 0x20 + 0x200 * (ch), 28)
#define UNIPHIER_MIO_CLK_USB2_PHY(idx, ch) \
UNIPHIER_CLK_GATE("usb2" #ch "-phy", (idx), "usb2", 0x20 + 0x200 * (ch), 29)
#define UNIPHIER_MIO_CLK_DMAC(idx) \
UNIPHIER_CLK_GATE("miodmac", (idx), "stdmac", 0x20, 25)
const struct uniphier_clk_data uniphier_sld3_mio_clk_data[] = {
UNIPHIER_MIO_CLK_SD_FIXED,
UNIPHIER_MIO_CLK_SD(0, 0),
UNIPHIER_MIO_CLK_SD(1, 1),
UNIPHIER_MIO_CLK_SD(2, 2),
UNIPHIER_MIO_CLK_DMAC(7),
UNIPHIER_MIO_CLK_USB2(8, 0),
UNIPHIER_MIO_CLK_USB2(9, 1),
UNIPHIER_MIO_CLK_USB2(10, 2),
UNIPHIER_MIO_CLK_USB2(11, 3),
UNIPHIER_MIO_CLK_USB2_PHY(12, 0),
UNIPHIER_MIO_CLK_USB2_PHY(13, 1),
UNIPHIER_MIO_CLK_USB2_PHY(14, 2),
UNIPHIER_MIO_CLK_USB2_PHY(15, 3),
{ /* sentinel */ }
};
const struct uniphier_clk_data uniphier_pro5_mio_clk_data[] = {
UNIPHIER_MIO_CLK_SD_FIXED,
UNIPHIER_MIO_CLK_SD(0, 0),
UNIPHIER_MIO_CLK_SD(1, 1),
{ /* sentinel */ }
};
/*
* Copyright (C) 2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "clk-uniphier.h"
#define UNIPHIER_PERI_CLK_UART(idx, ch) \
UNIPHIER_CLK_GATE("uart" #ch, (idx), "uart", 0x24, 19 + (ch))
#define UNIPHIER_PERI_CLK_I2C_COMMON \
UNIPHIER_CLK_GATE("i2c-common", -1, "i2c", 0x20, 1)
#define UNIPHIER_PERI_CLK_I2C(idx, ch) \
UNIPHIER_CLK_GATE("i2c" #ch, (idx), "i2c-common", 0x24, 5 + (ch))
#define UNIPHIER_PERI_CLK_FI2C(idx, ch) \
UNIPHIER_CLK_GATE("i2c" #ch, (idx), "i2c", 0x24, 24 + (ch))
const struct uniphier_clk_data uniphier_ld4_peri_clk_data[] = {
UNIPHIER_PERI_CLK_UART(0, 0),
UNIPHIER_PERI_CLK_UART(1, 1),
UNIPHIER_PERI_CLK_UART(2, 2),
UNIPHIER_PERI_CLK_UART(3, 3),
UNIPHIER_PERI_CLK_I2C_COMMON,
UNIPHIER_PERI_CLK_I2C(4, 0),
UNIPHIER_PERI_CLK_I2C(5, 1),
UNIPHIER_PERI_CLK_I2C(6, 2),
UNIPHIER_PERI_CLK_I2C(7, 3),
UNIPHIER_PERI_CLK_I2C(8, 4),
{ /* sentinel */ }
};
const struct uniphier_clk_data uniphier_pro4_peri_clk_data[] = {
UNIPHIER_PERI_CLK_UART(0, 0),
UNIPHIER_PERI_CLK_UART(1, 1),
UNIPHIER_PERI_CLK_UART(2, 2),
UNIPHIER_PERI_CLK_UART(3, 3),
UNIPHIER_PERI_CLK_FI2C(4, 0),
UNIPHIER_PERI_CLK_FI2C(5, 1),
UNIPHIER_PERI_CLK_FI2C(6, 2),
UNIPHIER_PERI_CLK_FI2C(7, 3),
UNIPHIER_PERI_CLK_FI2C(8, 4),
UNIPHIER_PERI_CLK_FI2C(9, 5),
UNIPHIER_PERI_CLK_FI2C(10, 6),
{ /* sentinel */ }
};
/*
* Copyright (C) 2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/stddef.h>
#include "clk-uniphier.h"
#define UNIPHIER_SLD3_SYS_CLK_SD \
UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 8), \
UNIPHIER_CLK_FACTOR("sd-133m", -1, "vpll27a", 1, 2)
#define UNIPHIER_PRO5_SYS_CLK_SD \
UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 12), \
UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 18)
#define UNIPHIER_LD20_SYS_CLK_SD \
UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 10), \
UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 15)
#define UNIPHIER_SLD3_SYS_CLK_STDMAC(idx) \
UNIPHIER_CLK_GATE("stdmac", (idx), NULL, 0x2104, 10)
#define UNIPHIER_LD11_SYS_CLK_STDMAC(idx) \
UNIPHIER_CLK_GATE("stdmac", (idx), NULL, 0x210c, 8)
#define UNIPHIER_PRO4_SYS_CLK_GIO(idx) \
UNIPHIER_CLK_GATE("gio", (idx), NULL, 0x2104, 6)
#define UNIPHIER_PRO4_SYS_CLK_USB3(idx, ch) \
UNIPHIER_CLK_GATE("usb3" #ch, (idx), NULL, 0x2104, 16 + (ch))
const struct uniphier_clk_data uniphier_sld3_sys_clk_data[] = {
UNIPHIER_CLK_FACTOR("spll", -1, "ref", 65, 1), /* 1597.44 MHz */
UNIPHIER_CLK_FACTOR("upll", -1, "ref", 6000, 512), /* 288 MHz */
UNIPHIER_CLK_FACTOR("a2pll", -1, "ref", 24, 1), /* 589.824 MHz */
UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 5625, 512), /* 270 MHz */
UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 16),
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
UNIPHIER_SLD3_SYS_CLK_SD,
UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
UNIPHIER_SLD3_SYS_CLK_STDMAC(8),
{ /* sentinel */ }
};
const struct uniphier_clk_data uniphier_ld4_sys_clk_data[] = {
UNIPHIER_CLK_FACTOR("spll", -1, "ref", 65, 1), /* 1597.44 MHz */
UNIPHIER_CLK_FACTOR("upll", -1, "ref", 6000, 512), /* 288 MHz */
UNIPHIER_CLK_FACTOR("a2pll", -1, "ref", 24, 1), /* 589.824 MHz */
UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 5625, 512), /* 270 MHz */
UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 16),
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
UNIPHIER_SLD3_SYS_CLK_SD,
UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
UNIPHIER_SLD3_SYS_CLK_STDMAC(8), /* Ether, HSC, MIO */
{ /* sentinel */ }
};
const struct uniphier_clk_data uniphier_pro4_sys_clk_data[] = {
UNIPHIER_CLK_FACTOR("spll", -1, "ref", 64, 1), /* 1600 MHz */
UNIPHIER_CLK_FACTOR("upll", -1, "ref", 288, 25), /* 288 MHz */
UNIPHIER_CLK_FACTOR("a2pll", -1, "upll", 256, 125), /* 589.824 MHz */
UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 270, 25), /* 270 MHz */
UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 8),
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 32),
UNIPHIER_SLD3_SYS_CLK_SD,
UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
UNIPHIER_SLD3_SYS_CLK_STDMAC(8), /* HSC, MIO, RLE */
UNIPHIER_PRO4_SYS_CLK_GIO(12), /* Ether, SATA, USB3 */
UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
{ /* sentinel */ }
};
const struct uniphier_clk_data uniphier_sld8_sys_clk_data[] = {
UNIPHIER_CLK_FACTOR("spll", -1, "ref", 64, 1), /* 1600 MHz */
UNIPHIER_CLK_FACTOR("upll", -1, "ref", 288, 25), /* 288 MHz */
UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 270, 25), /* 270 MHz */
UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 20),
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
UNIPHIER_SLD3_SYS_CLK_SD,
UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
UNIPHIER_SLD3_SYS_CLK_STDMAC(8), /* Ether, HSC, MIO */
{ /* sentinel */ }
};
const struct uniphier_clk_data uniphier_pro5_sys_clk_data[] = {
UNIPHIER_CLK_FACTOR("spll", -1, "ref", 120, 1), /* 2400 MHz */
UNIPHIER_CLK_FACTOR("dapll1", -1, "ref", 128, 1), /* 2560 MHz */
UNIPHIER_CLK_FACTOR("dapll2", -1, "ref", 144, 125), /* 2949.12 MHz */
UNIPHIER_CLK_FACTOR("uart", 0, "dapll2", 1, 40),
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 48),
UNIPHIER_PRO5_SYS_CLK_SD,
UNIPHIER_SLD3_SYS_CLK_STDMAC(8), /* HSC */
UNIPHIER_PRO4_SYS_CLK_GIO(12), /* PCIe, USB3 */
UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
{ /* sentinel */ }
};
const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = {
UNIPHIER_CLK_FACTOR("spll", -1, "ref", 96, 1), /* 2400 MHz */
UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 27),
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 48),
UNIPHIER_PRO5_SYS_CLK_SD,
UNIPHIER_SLD3_SYS_CLK_STDMAC(8), /* HSC, RLE */
/* GIO is always clock-enabled: no function for 0x2104 bit6 */
UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
/* The document mentions 0x2104 bit 18, but not functional */
UNIPHIER_CLK_GATE("usb30-phy", 16, NULL, 0x2104, 19),
UNIPHIER_CLK_GATE("usb31-phy", 20, NULL, 0x2104, 20),
{ /* sentinel */ }
};
const struct uniphier_clk_data uniphier_ld11_sys_clk_data[] = {
UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1), /* 2000 MHz */
UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
UNIPHIER_LD11_SYS_CLK_STDMAC(8), /* HSC, MIO */
UNIPHIER_CLK_FACTOR("usb2", -1, "ref", 24, 25),
{ /* sentinel */ }
};
const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = {
UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1), /* 2000 MHz */
UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
UNIPHIER_LD20_SYS_CLK_SD,
UNIPHIER_LD11_SYS_CLK_STDMAC(8), /* HSC */
/* GIO is always clock-enabled: no function for 0x210c bit5 */
/*
* clock for USB Link is enabled by the logic "OR" of bit 14 and bit 15.
* We do not use bit 15 here.
*/
UNIPHIER_CLK_GATE("usb30", 14, NULL, 0x210c, 14),
UNIPHIER_CLK_GATE("usb30-phy0", 16, NULL, 0x210c, 12),
UNIPHIER_CLK_GATE("usb30-phy1", 17, NULL, 0x210c, 13),
{ /* sentinel */ }
};
......@@ -106,4 +106,17 @@ struct clk_hw *uniphier_clk_register_mux(struct device *dev,
const char *name,
const struct uniphier_clk_mux_data *data);
extern const struct uniphier_clk_data uniphier_sld3_sys_clk_data[];
extern const struct uniphier_clk_data uniphier_ld4_sys_clk_data[];
extern const struct uniphier_clk_data uniphier_pro4_sys_clk_data[];
extern const struct uniphier_clk_data uniphier_sld8_sys_clk_data[];
extern const struct uniphier_clk_data uniphier_pro5_sys_clk_data[];
extern const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[];
extern const struct uniphier_clk_data uniphier_ld11_sys_clk_data[];
extern const struct uniphier_clk_data uniphier_ld20_sys_clk_data[];
extern const struct uniphier_clk_data uniphier_sld3_mio_clk_data[];
extern const struct uniphier_clk_data uniphier_pro5_mio_clk_data[];
extern const struct uniphier_clk_data uniphier_ld4_peri_clk_data[];
extern const struct uniphier_clk_data uniphier_pro4_peri_clk_data[];
#endif /* __CLK_UNIPHIER_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment