Commit 7f785763 authored by Randy Dunlap's avatar Randy Dunlap Committed by Greg Kroah-Hartman

pci: implement "pci=noaer"

For cases in which CONFIG_PCIEAER=y (such as distro kernels), allow users
to disable PCIE Advanced Error Reporting by using "pci=noaer" on the
kernel command line.

This can be used to work around hardware or (kernel) software problems.
Signed-off-by: default avatarRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent fd6e7321
......@@ -68,6 +68,7 @@ parameter is applicable:
PARIDE The ParIDE (parallel port IDE) subsystem is enabled.
PARISC The PA-RISC architecture is enabled.
PCI PCI bus support is enabled.
PCIE PCI Express support is enabled.
PCMCIA The PCMCIA subsystem is enabled.
PNP Plug & Play support is enabled.
PPC PowerPC architecture is enabled.
......@@ -1270,6 +1271,9 @@ and is between 256 and 4096 characters. It is defined in the file
Mechanism 1.
conf2 [X86-32] Force use of PCI Configuration
Mechanism 2.
noaer [PCIE] If the PCIEAER kernel config parameter is
enabled, this kernel boot option can be used to
disable the use of PCIE advanced error reporting.
nommconf [X86-32,X86_64] Disable use of MMCONFIG for PCI
Configuration
nomsi [MSI] If the PCI_MSI kernel config parameter is
......
......@@ -1586,6 +1586,8 @@ static int __devinit pci_setup(char *str)
if (*str && (str = pcibios_setup(str)) && *str) {
if (!strcmp(str, "nomsi")) {
pci_no_msi();
} else if (!strcmp(str, "noaer")) {
pci_no_aer();
} else if (!strncmp(str, "cbiosize=", 9)) {
pci_cardbus_io_size = memparse(str + 9, &str);
} else if (!strncmp(str, "cbmemsize=", 10)) {
......
......@@ -52,6 +52,12 @@ void pci_restore_msi_state(struct pci_dev *dev);
static inline void pci_restore_msi_state(struct pci_dev *dev) {}
#endif
#ifdef CONFIG_PCIEAER
void pci_no_aer(void);
#else
static inline void pci_no_aer(void) { }
#endif
static inline int pci_no_d1d2(struct pci_dev *dev)
{
unsigned int parent_dstates = 0;
......
......@@ -81,6 +81,13 @@ static struct pcie_port_service_driver aerdriver = {
.reset_link = aer_root_reset,
};
static int pcie_aer_disable;
void pci_no_aer(void)
{
pcie_aer_disable = 1; /* has priority over 'forceload' */
}
/**
* aer_irq - Root Port's ISR
* @irq: IRQ assigned to Root Port
......@@ -327,6 +334,8 @@ static void aer_error_resume(struct pci_dev *dev)
**/
static int __init aer_service_init(void)
{
if (pcie_aer_disable)
return -ENXIO;
return pcie_port_service_register(&aerdriver);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment