Commit 8042b778 authored by Archit Taneja's avatar Archit Taneja Committed by Rob Clark

dt-bindings: msm/dsi: Modify port and PHY bindings

The DSI node now has two ports that describe the connection between the
MDP interface output and the DSI input, and the connection between the DSI
output and the connected panel/bridge. Update the properties and the
example.

Also, use generic PHY bindings instead of the custom one.
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarArchit Taneja <architt@codeaurora.org>
Signed-off-by: default avatarRob Clark <robdclark@gmail.com>
parent cb9b08e9
...@@ -26,8 +26,14 @@ Required properties: ...@@ -26,8 +26,14 @@ Required properties:
- vdd-supply: phandle to vdd regulator device node - vdd-supply: phandle to vdd regulator device node
- vddio-supply: phandle to vdd-io regulator device node - vddio-supply: phandle to vdd-io regulator device node
- vdda-supply: phandle to vdda regulator device node - vdda-supply: phandle to vdda regulator device node
- qcom,dsi-phy: phandle to DSI PHY device node - phys: phandle to DSI PHY device node
- phy-names: the name of the corresponding PHY device
- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2) - syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
- ports: Contains 2 DSI controller ports as child nodes. Each port contains
an endpoint subnode as defined in these documents:
Documentation/devicetree/bindings/graph.txt
Documentation/devicetree/bindings/media/video-interfaces.txt
Optional properties: Optional properties:
- panel@0: Node of panel connected to this DSI controller. - panel@0: Node of panel connected to this DSI controller.
...@@ -44,11 +50,14 @@ Optional properties: ...@@ -44,11 +50,14 @@ Optional properties:
- pinctrl-names: the pin control state names; should contain "default" - pinctrl-names: the pin control state names; should contain "default"
- pinctrl-0: the default pinctrl state (active) - pinctrl-0: the default pinctrl state (active)
- pinctrl-n: the "sleep" pinctrl state - pinctrl-n: the "sleep" pinctrl state
- port: DSI controller output port, containing one endpoint subnode. - ports: contains DSI controller input and output ports as children, each
containing one endpoint subnode.
DSI Endpoint properties: DSI Endpoint properties:
- remote-endpoint: set to phandle of the connected panel's endpoint. - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's
input endpoint. For port@1, set to the MDP interface output.
See Documentation/devicetree/bindings/graph.txt for device graph info. See Documentation/devicetree/bindings/graph.txt for device graph info.
- data-lanes: this describes how the physical DSI data lanes are mapped - data-lanes: this describes how the physical DSI data lanes are mapped
to the logical lanes on the given platform. The value contained in to the logical lanes on the given platform. The value contained in
index n describes what physical lane is mapped to the logical lane n index n describes what physical lane is mapped to the logical lane n
...@@ -129,7 +138,8 @@ Example: ...@@ -129,7 +138,8 @@ Example:
vdd-supply = <&pma8084_l22>; vdd-supply = <&pma8084_l22>;
vddio-supply = <&pma8084_l12>; vddio-supply = <&pma8084_l12>;
qcom,dsi-phy = <&mdss_dsi_phy0>; phys = <&mdss_dsi_phy0>;
phy-names ="dsi-phy";
qcom,dual-dsi-mode; qcom,dual-dsi-mode;
qcom,master-dsi; qcom,master-dsi;
...@@ -139,6 +149,26 @@ Example: ...@@ -139,6 +149,26 @@ Example:
pinctrl-0 = <&mdss_dsi_active>; pinctrl-0 = <&mdss_dsi_active>;
pinctrl-1 = <&mdss_dsi_suspend>; pinctrl-1 = <&mdss_dsi_suspend>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi0_in: endpoint {
remote-endpoint = <&mdp_intf1_out>;
};
};
port@1 {
reg = <1>;
dsi0_out: endpoint {
remote-endpoint = <&panel_in>;
data-lanes = <0 1 2 3>;
};
};
};
panel: panel@0 { panel: panel@0 {
compatible = "sharp,lq101r1sx01"; compatible = "sharp,lq101r1sx01";
reg = <0>; reg = <0>;
...@@ -153,13 +183,6 @@ Example: ...@@ -153,13 +183,6 @@ Example:
}; };
}; };
}; };
port {
dsi0_out: endpoint {
remote-endpoint = <&panel_in>;
data-lanes = <0 1 2 3>;
};
};
}; };
mdss_dsi_phy0: qcom,mdss_dsi_phy@fd922a00 { mdss_dsi_phy0: qcom,mdss_dsi_phy@fd922a00 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment