Commit 81452182 authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz Committed by Jeff Garzik

pata_sl82c105: add Power Management support

Fixes IDE -> libata regression.

There shouldn't be any problems with it as corresponding IDE's host
driver (sl82c105) has been supporting PCI Power Management since
Oct 10 2008 (commit feb22b7f "ide: add proper PCI PM support (v2)")
and IDE PM since Jun 14 2003 (patch v2.5.73 "ide: Power Management").
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent adacaf14
/*
* pata_sl82c105.c - SL82C105 PATA for new ATA layer
* (C) 2005 Red Hat Inc
* (C) 2011 Bartlomiej Zolnierkiewicz
*
* Based in part on linux/drivers/ide/pci/sl82c105.c
* SL82C105/Winbond 553 IDE driver
......@@ -289,6 +290,14 @@ static int sl82c105_bridge_revision(struct pci_dev *pdev)
return bridge->revision;
}
static void sl82c105_fixup(struct pci_dev *pdev)
{
u32 val;
pci_read_config_dword(pdev, 0x40, &val);
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(pdev, 0x40, val);
}
static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
......@@ -306,7 +315,6 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
/* for now use only the first port */
const struct ata_port_info *ppi[] = { &info_early,
NULL };
u32 val;
int rev;
int rc;
......@@ -325,13 +333,28 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
else
ppi[0] = &info_dma;
pci_read_config_dword(dev, 0x40, &val);
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(dev, 0x40, val);
sl82c105_fixup(dev);
return ata_pci_bmdma_init_one(dev, ppi, &sl82c105_sht, NULL, 0);
}
#ifdef CONFIG_PM
static int sl82c105_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
sl82c105_fixup(pdev);
ata_host_resume(host);
return 0;
}
#endif
static const struct pci_device_id sl82c105[] = {
{ PCI_VDEVICE(WINBOND, PCI_DEVICE_ID_WINBOND_82C105), },
......@@ -342,7 +365,11 @@ static struct pci_driver sl82c105_pci_driver = {
.name = DRV_NAME,
.id_table = sl82c105,
.probe = sl82c105_init_one,
.remove = ata_pci_remove_one
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = sl82c105_reinit_one,
#endif
};
static int __init sl82c105_init(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment