Commit 815e9721 authored by Nicolas Royer's avatar Nicolas Royer Committed by Herbert Xu

ARM: AT91SAM9G45: add crypto peripherals

Signed-off-by: default avatarNicolas Royer <nicolas@eukrea.com>
Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: default avatarEric Bénard <eric@eukrea.com>
Tested-by: default avatarEric Bénard <eric@eukrea.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
parent 6c79294f
...@@ -182,6 +182,13 @@ static struct clk adc_op_clk = { ...@@ -182,6 +182,13 @@ static struct clk adc_op_clk = {
.rate_hz = 13200000, .rate_hz = 13200000,
}; };
/* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */
static struct clk aestdessha_clk = {
.name = "aestdessha_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_AESTDESSHA,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk *periph_clocks[] __initdata = { static struct clk *periph_clocks[] __initdata = {
&pioA_clk, &pioA_clk,
&pioB_clk, &pioB_clk,
...@@ -211,6 +218,7 @@ static struct clk *periph_clocks[] __initdata = { ...@@ -211,6 +218,7 @@ static struct clk *periph_clocks[] __initdata = {
&udphs_clk, &udphs_clk,
&mmc1_clk, &mmc1_clk,
&adc_op_clk, &adc_op_clk,
&aestdessha_clk,
// irq0 // irq0
}; };
...@@ -231,6 +239,9 @@ static struct clk_lookup periph_clocks_lookups[] = { ...@@ -231,6 +239,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk), CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel_sha", &aestdessha_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel_tdes", &aestdessha_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel_aes", &aestdessha_clk),
/* more usart lookup table for DT entries */ /* more usart lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck), CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk), CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
...@@ -387,7 +398,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { ...@@ -387,7 +398,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
3, /* Ethernet */ 3, /* Ethernet */
0, /* Image Sensor Interface */ 0, /* Image Sensor Interface */
2, /* USB Device High speed port */ 2, /* USB Device High speed port */
0, 0, /* AESTDESSHA Crypto HW Accelerators */
0, /* Multimedia Card Interface 1 */ 0, /* Multimedia Card Interface 1 */
0, 0,
0, /* Advanced Interrupt Controller (IRQ0) */ 0, /* Advanced Interrupt Controller (IRQ0) */
......
...@@ -18,6 +18,7 @@ ...@@ -18,6 +18,7 @@
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/i2c-gpio.h> #include <linux/i2c-gpio.h>
#include <linux/atmel-mci.h> #include <linux/atmel-mci.h>
#include <linux/platform_data/atmel-aes.h>
#include <linux/platform_data/at91_adc.h> #include <linux/platform_data/at91_adc.h>
...@@ -1830,6 +1831,130 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} ...@@ -1830,6 +1831,130 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
void __init at91_add_device_serial(void) {} void __init at91_add_device_serial(void) {}
#endif #endif
/* --------------------------------------------------------------------
* SHA1/SHA256
* -------------------------------------------------------------------- */
#if defined(CONFIG_CRYPTO_DEV_ATMEL_SHA) || defined(CONFIG_CRYPTO_DEV_ATMEL_SHA_MODULE)
static struct resource sha_resources[] = {
{
.start = AT91SAM9G45_BASE_SHA,
.end = AT91SAM9G45_BASE_SHA + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_AESTDESSHA,
.end = AT91SAM9G45_ID_AESTDESSHA,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_sha_device = {
.name = "atmel_sha",
.id = -1,
.resource = sha_resources,
.num_resources = ARRAY_SIZE(sha_resources),
};
static void __init at91_add_device_sha(void)
{
platform_device_register(&at91sam9g45_sha_device);
}
#else
static void __init at91_add_device_sha(void) {}
#endif
/* --------------------------------------------------------------------
* DES/TDES
* -------------------------------------------------------------------- */
#if defined(CONFIG_CRYPTO_DEV_ATMEL_TDES) || defined(CONFIG_CRYPTO_DEV_ATMEL_TDES_MODULE)
static struct resource tdes_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_TDES,
.end = AT91SAM9G45_BASE_TDES + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_AESTDESSHA,
.end = AT91SAM9G45_ID_AESTDESSHA,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_tdes_device = {
.name = "atmel_tdes",
.id = -1,
.resource = tdes_resources,
.num_resources = ARRAY_SIZE(tdes_resources),
};
static void __init at91_add_device_tdes(void)
{
platform_device_register(&at91sam9g45_tdes_device);
}
#else
static void __init at91_add_device_tdes(void) {}
#endif
/* --------------------------------------------------------------------
* AES
* -------------------------------------------------------------------- */
#if defined(CONFIG_CRYPTO_DEV_ATMEL_AES) || defined(CONFIG_CRYPTO_DEV_ATMEL_AES_MODULE)
static struct aes_platform_data aes_data;
static u64 aes_dmamask = DMA_BIT_MASK(32);
static struct resource aes_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_AES,
.end = AT91SAM9G45_BASE_AES + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_AESTDESSHA,
.end = AT91SAM9G45_ID_AESTDESSHA,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_aes_device = {
.name = "atmel_aes",
.id = -1,
.dev = {
.dma_mask = &aes_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &aes_data,
},
.resource = aes_resources,
.num_resources = ARRAY_SIZE(aes_resources),
};
static void __init at91_add_device_aes(void)
{
struct at_dma_slave *atslave;
struct aes_dma_data *alt_atslave;
alt_atslave = kzalloc(sizeof(struct aes_dma_data), GFP_KERNEL);
/* DMA TX slave channel configuration */
atslave = &alt_atslave->txdata;
atslave->dma_dev = &at_hdmac_device.dev;
atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_SRC_H2SEL_HW |
ATC_SRC_PER(AT_DMA_ID_AES_RX);
/* DMA RX slave channel configuration */
atslave = &alt_atslave->rxdata;
atslave->dma_dev = &at_hdmac_device.dev;
atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_DST_H2SEL_HW |
ATC_DST_PER(AT_DMA_ID_AES_TX);
aes_data.dma_slave = alt_atslave;
platform_device_register(&at91sam9g45_aes_device);
}
#else
static void __init at91_add_device_aes(void) {}
#endif
/* -------------------------------------------------------------------- */ /* -------------------------------------------------------------------- */
/* /*
...@@ -1847,6 +1972,9 @@ static int __init at91_add_standard_devices(void) ...@@ -1847,6 +1972,9 @@ static int __init at91_add_standard_devices(void)
at91_add_device_trng(); at91_add_device_trng();
at91_add_device_watchdog(); at91_add_device_watchdog();
at91_add_device_tc(); at91_add_device_tc();
at91_add_device_sha();
at91_add_device_tdes();
at91_add_device_aes();
return 0; return 0;
} }
......
...@@ -136,6 +136,8 @@ ...@@ -136,6 +136,8 @@
#define AT_DMA_ID_SSC1_RX 8 #define AT_DMA_ID_SSC1_RX 8
#define AT_DMA_ID_AC97_TX 9 #define AT_DMA_ID_AC97_TX 9
#define AT_DMA_ID_AC97_RX 10 #define AT_DMA_ID_AC97_RX 10
#define AT_DMA_ID_AES_TX 11
#define AT_DMA_ID_AES_RX 12
#define AT_DMA_ID_MCI1 13 #define AT_DMA_ID_MCI1 13
#endif #endif
#ifndef __LINUX_ATMEL_AES_H
#define __LINUX_ATMEL_AES_H
#include <mach/at_hdmac.h>
/**
* struct aes_dma_data - DMA data for AES
*/
struct aes_dma_data {
struct at_dma_slave txdata;
struct at_dma_slave rxdata;
};
/**
* struct aes_platform_data - board-specific AES configuration
* @dma_slave: DMA slave interface to use in data transfers.
*/
struct aes_platform_data {
struct aes_dma_data *dma_slave;
};
#endif /* __LINUX_ATMEL_AES_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment