Merge branches 'regmap/irq' and 'regmap/cache' into regmap-next

drivers/base/regmap/Kconfig

@@ -13,3 +13,6 @@ config REGMAP_I2C
 
 config REGMAP_SPI
 	tristate
+
+config REGMAP_IRQ
+	bool

drivers/base/regmap/Makefile

@@ -3,3 +3,4 @@ obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-lzo.o
 obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o
 obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o
 obj-$(CONFIG_REGMAP_SPI) += regmap-spi.o
+obj-$(CONFIG_REGMAP_IRQ) += regmap-irq.o

drivers/base/regmap/internal.h

@@ -74,6 +74,7 @@ struct regmap {
 	struct reg_default *reg_defaults;
 	const void *reg_defaults_raw;
 	void *cache;
+	bool cache_dirty;
 };
 
 struct regcache_ops {

drivers/base/regmap/regcache-lzo.c

@@ -354,7 +354,7 @@ static int regcache_lzo_sync(struct regmap *map)
 }
 
 struct regcache_ops regcache_lzo_ops = {
-	.type = REGCACHE_LZO,
+	.type = REGCACHE_COMPRESSED,
 	.name = "lzo",
 	.init = regcache_lzo_init,
 	.exit = regcache_lzo_exit,

drivers/base/regmap/regcache.c

@@ -241,6 +241,8 @@ int regcache_sync(struct regmap *map)
 		map->cache_ops->name);
 	name = map->cache_ops->name;
 	trace_regcache_sync(map->dev, name, "start");
+	if (!map->cache_dirty)
+		goto out;
 	if (map->cache_ops->sync) {
 		ret = map->cache_ops->sync(map);
 	} else {
@@ -290,6 +292,23 @@ void regcache_cache_only(struct regmap *map, bool enable)
 }
 EXPORT_SYMBOL_GPL(regcache_cache_only);
 
+/**
+ * regcache_mark_dirty: Mark the register cache as dirty
+ *
+ * @map: map to mark
+ *
+ * Mark the register cache as dirty, for example due to the device
+ * having been powered down for suspend.  If the cache is not marked
+ * as dirty then the cache sync will be suppressed.
+ */
+void regcache_mark_dirty(struct regmap *map)
+{
+	mutex_lock(&map->lock);
+	map->cache_dirty = true;
+	mutex_unlock(&map->lock);
+}
+EXPORT_SYMBOL_GPL(regcache_mark_dirty);
+
 /**
  * regcache_cache_bypass: Put a register map into cache bypass mode
  *

drivers/base/regmap/regmap-irq.c

+/*
+ * regmap based irq_chip
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/export.h>
+#include <linux/regmap.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+#include "internal.h"
+
+struct regmap_irq_chip_data {
+	struct mutex lock;
+
+	struct regmap *map;
+	struct regmap_irq_chip *chip;
+
+	int irq_base;
+
+	void *status_reg_buf;
+	unsigned int *status_buf;
+	unsigned int *mask_buf;
+	unsigned int *mask_buf_def;
+};
+
+static inline const
+struct regmap_irq *irq_to_regmap_irq(struct regmap_irq_chip_data *data,
+				     int irq)
+{
+	return &data->chip->irqs[irq - data->irq_base];
+}
+
+static void regmap_irq_lock(struct irq_data *data)
+{
+	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&d->lock);
+}
+
+static void regmap_irq_sync_unlock(struct irq_data *data)
+{
+	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+	int i, ret;
+
+	/*
+	 * If there's been a change in the mask write it back to the
+	 * hardware.  We rely on the use of the regmap core cache to
+	 * suppress pointless writes.
+	 */
+	for (i = 0; i < d->chip->num_regs; i++) {
+		ret = regmap_update_bits(d->map, d->chip->mask_base + i,
+					 d->mask_buf_def[i], d->mask_buf[i]);
+		if (ret != 0)
+			dev_err(d->map->dev, "Failed to sync masks in %x\n",
+				d->chip->mask_base + i);
+	}
+
+	mutex_unlock(&d->lock);
+}
+
+static void regmap_irq_enable(struct irq_data *data)
+{
+	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+	const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->irq);
+
+	d->mask_buf[irq_data->reg_offset] &= ~irq_data->mask;
+}
+
+static void regmap_irq_disable(struct irq_data *data)
+{
+	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+	const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->irq);
+
+	d->mask_buf[irq_data->reg_offset] |= irq_data->mask;
+}
+
+static struct irq_chip regmap_irq_chip = {
+	.name			= "regmap",
+	.irq_bus_lock		= regmap_irq_lock,
+	.irq_bus_sync_unlock	= regmap_irq_sync_unlock,
+	.irq_disable		= regmap_irq_disable,
+	.irq_enable		= regmap_irq_enable,
+};
+
+static irqreturn_t regmap_irq_thread(int irq, void *d)
+{
+	struct regmap_irq_chip_data *data = d;
+	struct regmap_irq_chip *chip = data->chip;
+	struct regmap *map = data->map;
+	int ret, i;
+	u8 *buf8 = data->status_reg_buf;
+	u16 *buf16 = data->status_reg_buf;
+	u32 *buf32 = data->status_reg_buf;
+
+	ret = regmap_bulk_read(map, chip->status_base, data->status_reg_buf,
+			       chip->num_regs);
+	if (ret != 0) {
+		dev_err(map->dev, "Failed to read IRQ status: %d\n", ret);
+		return IRQ_NONE;
+	}
+
+	/*
+	 * Ignore masked IRQs and ack if we need to; we ack early so
+	 * there is no race between handling and acknowleding the
+	 * interrupt.  We assume that typically few of the interrupts
+	 * will fire simultaneously so don't worry about overhead from
+	 * doing a write per register.
+	 */
+	for (i = 0; i < data->chip->num_regs; i++) {
+		switch (map->format.val_bytes) {
+		case 1:
+			data->status_buf[i] = buf8[i];
+			break;
+		case 2:
+			data->status_buf[i] = buf16[i];
+			break;
+		case 4:
+			data->status_buf[i] = buf32[i];
+			break;
+		default:
+			BUG();
+			return IRQ_NONE;
+		}
+
+		data->status_buf[i] &= ~data->mask_buf[i];
+
+		if (data->status_buf[i] && chip->ack_base) {
+			ret = regmap_write(map, chip->ack_base + i,
+					   data->status_buf[i]);
+			if (ret != 0)
+				dev_err(map->dev, "Failed to ack 0x%x: %d\n",
+					chip->ack_base + i, ret);
+		}
+	}
+
+	for (i = 0; i < chip->num_irqs; i++) {
+		if (data->status_buf[chip->irqs[i].reg_offset] &
+		    chip->irqs[i].mask) {
+			handle_nested_irq(data->irq_base + i);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * regmap_add_irq_chip(): Use standard regmap IRQ controller handling
+ *
+ * map:       The regmap for the device.
+ * irq:       The IRQ the device uses to signal interrupts
+ * irq_flags: The IRQF_ flags to use for the primary interrupt.
+ * chip:      Configuration for the interrupt controller.
+ * data:      Runtime data structure for the controller, allocated on success
+ *
+ * Returns 0 on success or an errno on failure.
+ *
+ * In order for this to be efficient the chip really should use a
+ * register cache.  The chip driver is responsible for restoring the
+ * register values used by the IRQ controller over suspend and resume.
+ */
+int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
+			int irq_base, struct regmap_irq_chip *chip,
+			struct regmap_irq_chip_data **data)
+{
+	struct regmap_irq_chip_data *d;
+	int cur_irq, i;
+	int ret = -ENOMEM;
+
+	irq_base = irq_alloc_descs(irq_base, 0, chip->num_irqs, 0);
+	if (irq_base < 0) {
+		dev_warn(map->dev, "Failed to allocate IRQs: %d\n",
+			 irq_base);
+		return irq_base;
+	}
+
+	d = kzalloc(sizeof(*d), GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+
+	d->status_buf = kzalloc(sizeof(unsigned int) * chip->num_regs,
+				GFP_KERNEL);
+	if (!d->status_buf)
+		goto err_alloc;
+
+	d->status_reg_buf = kzalloc(map->format.val_bytes * chip->num_regs,
+				    GFP_KERNEL);
+	if (!d->status_reg_buf)
+		goto err_alloc;
+
+	d->mask_buf = kzalloc(sizeof(unsigned int) * chip->num_regs,
+			      GFP_KERNEL);
+	if (!d->mask_buf)
+		goto err_alloc;
+
+	d->mask_buf_def = kzalloc(sizeof(unsigned int) * chip->num_regs,
+				  GFP_KERNEL);
+	if (!d->mask_buf_def)
+		goto err_alloc;
+
+	d->map = map;
+	d->chip = chip;
+	d->irq_base = irq_base;
+	mutex_init(&d->lock);
+
+	for (i = 0; i < chip->num_irqs; i++)
+		d->mask_buf_def[chip->irqs[i].reg_offset]
+			|= chip->irqs[i].mask;
+
+	/* Mask all the interrupts by default */
+	for (i = 0; i < chip->num_regs; i++) {
+		d->mask_buf[i] = d->mask_buf_def[i];
+		ret = regmap_write(map, chip->mask_base + i, d->mask_buf[i]);
+		if (ret != 0) {
+			dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
+				chip->mask_base + i, ret);
+			goto err_alloc;
+		}
+	}
+
+	/* Register them with genirq */
+	for (cur_irq = irq_base;
+	     cur_irq < chip->num_irqs + irq_base;
+	     cur_irq++) {
+		irq_set_chip_data(cur_irq, d);
+		irq_set_chip_and_handler(cur_irq, &regmap_irq_chip,
+					 handle_edge_irq);
+		irq_set_nested_thread(cur_irq, 1);
+
+		/* ARM needs us to explicitly flag the IRQ as valid
+		 * and will set them noprobe when we do so. */
+#ifdef CONFIG_ARM
+		set_irq_flags(cur_irq, IRQF_VALID);
+#else
+		irq_set_noprobe(cur_irq);
+#endif
+	}
+
+	ret = request_threaded_irq(irq, NULL, regmap_irq_thread, irq_flags,
+				   chip->name, d);
+	if (ret != 0) {
+		dev_err(map->dev, "Failed to request IRQ %d: %d\n", irq, ret);
+		goto err_alloc;
+	}
+
+	return 0;
+
+err_alloc:
+	kfree(d->mask_buf_def);
+	kfree(d->mask_buf);
+	kfree(d->status_reg_buf);
+	kfree(d->status_buf);
+	kfree(d);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regmap_add_irq_chip);
+
+/**
+ * regmap_del_irq_chip(): Stop interrupt handling for a regmap IRQ chip
+ *
+ * @irq: Primary IRQ for the device
+ * @d:   regmap_irq_chip_data allocated by regmap_add_irq_chip()
+ */
+void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *d)
+{
+	if (!d)
+		return;
+
+	free_irq(irq, d);
+	kfree(d->mask_buf_def);
+	kfree(d->mask_buf);
+	kfree(d->status_reg_buf);
+	kfree(d->status_buf);
+	kfree(d);
+}
+EXPORT_SYMBOL_GPL(regmap_del_irq_chip);

drivers/base/regmap/regmap.c

@@ -306,8 +306,10 @@ int _regmap_write(struct regmap *map, unsigned int reg,
 		ret = regcache_write(map, reg, val);
 		if (ret != 0)
 			return ret;
-		if (map->cache_only)
+		if (map->cache_only) {
+			map->cache_dirty = true;
 			return 0;
+		}
 	}
 
 	trace_regmap_reg_write(map->dev, reg, val);

include/linux/regmap.h

@@ -25,7 +25,7 @@ enum regcache_type {
 	REGCACHE_NONE,
 	REGCACHE_INDEXED,
 	REGCACHE_RBTREE,
-	REGCACHE_LZO
+	REGCACHE_COMPRESSED
 };
 
 /**
@@ -143,5 +143,53 @@ int regmap_update_bits(struct regmap *map, unsigned int reg,
 int regcache_sync(struct regmap *map);
 void regcache_cache_only(struct regmap *map, bool enable);
 void regcache_cache_bypass(struct regmap *map, bool enable);
+void regcache_mark_dirty(struct regmap *map);
+
+/**
+ * Description of an IRQ for the generic regmap irq_chip.
+ *
+ * @reg_offset: Offset of the status/mask register within the bank
+ * @mask:       Mask used to flag/control the register.
+ */
+struct regmap_irq {
+	unsigned int reg_offset;
+	unsigned int mask;
+};
+
+/**
+ * Description of a generic regmap irq_chip.  This is not intended to
+ * handle every possible interrupt controller, but it should handle a
+ * substantial proportion of those that are found in the wild.
+ *
+ * @name:        Descriptive name for IRQ controller.
+ *
+ * @status_base: Base status register address.
+ * @mask_base:   Base mask register address.
+ * @ack_base:    Base ack address.  If zero then the chip is clear on read.
+ *
+ * @num_regs:    Number of registers in each control bank.
+ * @irqs:        Descriptors for individual IRQs.  Interrupt numbers are
+ *               assigned based on the index in the array of the interrupt.
+ * @num_irqs:    Number of descriptors.
+ */
+struct regmap_irq_chip {
+	const char *name;
+
+	unsigned int status_base;
+	unsigned int mask_base;
+	unsigned int ack_base;
+
+	int num_regs;
+
+	const struct regmap_irq *irqs;
+	int num_irqs;
+};
+
+struct regmap_irq_chip_data;
+
+int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
+			int irq_base, struct regmap_irq_chip *chip,
+			struct regmap_irq_chip_data **data);
+void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data);
 
 #endif