Commit 81df7d85 authored by David Lechner's avatar David Lechner Committed by Sekhar Nori

ARM: davinci: dm646x: add new clock init using common clock framework

This adds the new board-specific clock init in mach-davinci/dm646x.c
using the new common clock framework drivers.

The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.

Also clean up the #includes since we are adding some here.
Signed-off-by: default avatarDavid Lechner <david@lechnology.com>
Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
parent a5b1a871
......@@ -776,6 +776,8 @@ static __init void evm_init(void)
int ret;
struct davinci_soc_info *soc_info = &davinci_soc_info;
dm646x_register_clocks();
ret = dm646x_gpio_register();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
......
......@@ -116,6 +116,7 @@ int dm644x_gpio_register(void);
/* DM646x function declarations */
void dm646x_init(void);
void dm646x_init_time(unsigned long ref_clk_rate, unsigned long aux_clkin_rate);
void dm646x_register_clocks(void);
void dm646x_init_mcasp0(struct snd_platform_data *pdata);
void dm646x_init_mcasp1(struct snd_platform_data *pdata);
int dm646x_init_edma(struct edma_rsv_info *rsv);
......
......@@ -8,29 +8,35 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/clk-provider.h>
#include <linux/clk/davinci.h>
#include <linux/clkdev.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
#include <linux/platform_data/edma.h>
#include <linux/platform_data/gpio-davinci.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <asm/mach/map.h>
#include <mach/common.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
#include "psc.h"
#include <mach/mux.h>
#include <mach/time.h>
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/time.h>
#include "asp.h"
#include "davinci.h"
#include "clock.h"
#include "mux.h"
#include "asp.h"
#ifndef CONFIG_COMMON_CLK
#include "clock.h"
#include "psc.h"
#endif
#define DAVINCI_VPIF_BASE (0x01C12000)
......@@ -46,6 +52,7 @@
#define DM646X_EMAC_CNTRL_RAM_OFFSET 0x2000
#define DM646X_EMAC_CNTRL_RAM_SIZE 0x2000
#ifndef CONFIG_COMMON_CLK
static struct pll_data pll1_data = {
.num = 1,
.phys_base = DAVINCI_PLL1_BASE,
......@@ -356,6 +363,7 @@ static struct clk_lookup dm646x_clks[] = {
CLK(NULL, "vpif1", &vpif1_clk),
CLK(NULL, NULL, NULL),
};
#endif
static struct emac_platform_data dm646x_emac_pdata = {
.ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET,
......@@ -954,10 +962,49 @@ void __init dm646x_init(void)
void __init dm646x_init_time(unsigned long ref_clk_rate,
unsigned long aux_clkin_rate)
{
#ifdef CONFIG_COMMON_CLK
void __iomem *pll1, *psc;
struct clk *clk;
clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, ref_clk_rate);
clk_register_fixed_rate(NULL, "aux_clkin", NULL, 0, aux_clkin_rate);
pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
dm646x_pll1_init(NULL, pll1, NULL);
psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
dm646x_psc_init(NULL, psc);
clk = clk_get(NULL, "timer0");
davinci_timer_init(clk);
#else
ref_clk.rate = ref_clk_rate;
aux_clkin.rate = aux_clkin_rate;
davinci_clk_init(dm646x_clks);
davinci_timer_init(&timer0_clk);
#endif
}
static struct resource dm646x_pll2_resources[] = {
{
.start = DAVINCI_PLL2_BASE,
.end = DAVINCI_PLL2_BASE + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device dm646x_pll2_device = {
.name = "dm646x-pll2",
.id = -1,
.resource = dm646x_pll2_resources,
.num_resources = ARRAY_SIZE(dm646x_pll2_resources),
};
void __init dm646x_register_clocks(void)
{
/* PLL1 and PSC are registered in dm646x_init_time() */
platform_device_register(&dm646x_pll2_device);
}
static int __init dm646x_init_devices(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment