USB: ftdi_sio: Adding VID and PID for Tellstick

I would like to add the VID and PID for Telldus Technologies Homeautomation
usb-dongle to the ftdi_sio driver.


From: Micke Prag <micke.prag@telldus.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/serial/ftdi_sio.c

@@ -513,6 +513,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
 	{ USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
+	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };

drivers/usb/serial/ftdi_sio.h

@@ -491,6 +491,12 @@
 #define FTDI_TACTRIX_OPENPORT_13S_PID	0xCC49	/* OpenPort 1.3 Subaru */
 #define FTDI_TACTRIX_OPENPORT_13U_PID	0xCC4A	/* OpenPort 1.3 Universal */
 
+/*
+ * Telldus Technologies
+ */
+#define TELLDUS_VID			0x1781	/* Vendor ID */
+#define TELLDUS_TELLSTICK_PID		0x0C30	/* RF control dongle 433 MHz using FT232RL */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */