drm/amd/pm: put Navi1X umc cdr workaround in post_smu_init

That's where the uclk dpm get enabled and then the
uclk cdr workaround can be applied.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/pm/inc/amdgpu_smu.h

@@ -590,7 +590,6 @@ struct pptable_funcs {
 	int (*mode2_reset)(struct smu_context *smu);
 	int (*get_dpm_ultimate_freq)(struct smu_context *smu, enum smu_clk_type clk_type, uint32_t *min, uint32_t *max);
 	int (*set_soft_freq_limited_range)(struct smu_context *smu, enum smu_clk_type clk_type, uint32_t min, uint32_t max);
-	int (*disable_umc_cdr_12gbps_workaround)(struct smu_context *smu);
 	int (*set_power_source)(struct smu_context *smu, enum smu_power_src_type power_src);
 	void (*log_thermal_throttling_event)(struct smu_context *smu);
 	size_t (*get_pp_feature_mask)(struct smu_context *smu, char *buf);

drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c

@@ -975,12 +975,6 @@ static int smu_smc_hw_setup(struct smu_context *smu)
 		return ret;
 	}
 
-	ret = smu_disable_umc_cdr_12gbps_workaround(smu);
-	if (ret) {
-		dev_err(adev->dev, "Workaround failed to disable UMC CDR feature on 12Gbps SKU!\n");
-		return ret;
-	}
-
 	/*
 	 * For Navi1X, manually switch it to AC mode as PMFW
 	 * may boot it with DC mode.

drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c

@@ -2568,6 +2568,7 @@ static int navi10_post_smu_init(struct smu_context *smu)
 	struct smu_feature *feature = &smu->smu_feature;
 	struct amdgpu_device *adev = smu->adev;
 	uint64_t feature_mask = 0;
+	int ret = 0;
 
 	/* For Naiv1x, enable these features only after DAL initialization */
 	if (adev->pm.pp_feature & PP_SOCCLK_DPM_MASK)
@@ -2590,9 +2591,19 @@ static int navi10_post_smu_init(struct smu_context *smu)
 		  (unsigned long *)(&feature_mask),
 		  SMU_FEATURE_MAX);
 
-	return smu_cmn_feature_update_enable_state(smu,
-						   feature_mask,
-						   true);
+	ret = smu_cmn_feature_update_enable_state(smu,
+						  feature_mask,
+						  true);
+	if (ret) {
+		dev_err(adev->dev, "Failed to post uclk/socclk dpm enablement!\n");
+		return ret;
+	}
+
+	ret = navi10_disable_umc_cdr_12gbps_workaround(smu);
+	if (ret)
+		dev_err(adev->dev, "Failed to apply umc cdr workaround!\n");
+
+	return ret;
 }
 
 static const struct pptable_funcs navi10_ppt_funcs = {
@@ -2669,7 +2680,6 @@ static const struct pptable_funcs navi10_ppt_funcs = {
 	.set_default_od_settings = navi10_set_default_od_settings,
 	.od_edit_dpm_table = navi10_od_edit_dpm_table,
 	.run_btc = navi10_run_btc,
-	.disable_umc_cdr_12gbps_workaround = navi10_disable_umc_cdr_12gbps_workaround,
 	.set_power_source = smu_v11_0_set_power_source,
 	.get_pp_feature_mask = smu_cmn_get_pp_feature_mask,
 	.set_pp_feature_mask = smu_cmn_set_pp_feature_mask,

drivers/gpu/drm/amd/pm/swsmu/smu_internal.h

@@ -83,7 +83,6 @@
 #define smu_asic_set_performance_level(smu, level)			smu_ppt_funcs(set_performance_level, -EINVAL, smu, level)
 #define smu_dump_pptable(smu)						smu_ppt_funcs(dump_pptable, 0, smu)
 #define smu_update_pcie_parameters(smu, pcie_gen_cap, pcie_width_cap)	smu_ppt_funcs(update_pcie_parameters, 0, smu, pcie_gen_cap, pcie_width_cap)
-#define smu_disable_umc_cdr_12gbps_workaround(smu)			smu_ppt_funcs(disable_umc_cdr_12gbps_workaround, 0, smu)
 #define smu_set_power_source(smu, power_src)				smu_ppt_funcs(set_power_source, 0, smu, power_src)
 #define smu_i2c_init(smu, control)					smu_ppt_funcs(i2c_init, 0, smu, control)
 #define smu_i2c_fini(smu, control)					smu_ppt_funcs(i2c_fini, 0, smu, control)