Commit 8400cff6 authored by Vladimir Oltean's avatar Vladimir Oltean Committed by David S. Miller

net: dsa: sja1105: Rethink the PHYLINK callbacks

The first fact that needs to be stated is that the per-MAC settings in
SJA1105 called EGRESS and INGRESS do *not* disable egress and ingress on
the MAC. They only prevent non-link-local traffic from being
sent/received on this port.

So instead of having .phylink_mac_config essentially mess with the STP
state and force it to DISABLED/BLOCKING (which also brings useless
complications in sja1105_static_config_reload), simply add the
.phylink_mac_link_down and .phylink_mac_link_up callbacks which inhibit
TX at the MAC level, while leaving RX essentially enabled.

Also stop from trying to put the link down in .phylink_mac_config, which
is incorrect.
Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d114fb04
......@@ -695,18 +695,10 @@ static int sja1105_speed[] = {
[SJA1105_SPEED_1000MBPS] = SPEED_1000,
};
/* Set link speed and enable/disable traffic I/O in the MAC configuration
* for a specific port.
*
* @speed_mbps: If 0, leave the speed unchanged, else adapt MAC to PHY speed.
* @enabled: Manage Rx and Tx settings for this port. If false, overrides the
* settings from the STP state, but not persistently (does not
* overwrite the static MAC info for this port).
*/
/* Set link speed in the MAC configuration for a specific port. */
static int sja1105_adjust_port_config(struct sja1105_private *priv, int port,
int speed_mbps, bool enabled)
int speed_mbps)
{
struct sja1105_mac_config_entry dyn_mac;
struct sja1105_xmii_params_entry *mii;
struct sja1105_mac_config_entry *mac;
struct device *dev = priv->ds->dev;
......@@ -714,8 +706,14 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port,
sja1105_speed_t speed;
int rc;
mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries;
/* On P/Q/R/S, one can read from the device via the MAC reconfiguration
* tables. On E/T, MAC reconfig tables are not readable, only writable.
* We have to *know* what the MAC looks like. For the sake of keeping
* the code common, we'll use the static configuration tables as a
* reasonable approximation for both E/T and P/Q/R/S.
*/
mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries;
mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries;
switch (speed_mbps) {
case SPEED_UNKNOWN:
......@@ -736,26 +734,16 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port,
return -EINVAL;
}
/* If requested, overwrite SJA1105_SPEED_AUTO from the static MAC
* configuration table, since this will be used for the clocking setup,
* and we no longer need to store it in the static config (already told
* hardware we want auto during upload phase).
/* Overwrite SJA1105_SPEED_AUTO from the static MAC configuration
* table, since this will be used for the clocking setup, and we no
* longer need to store it in the static config (already told hardware
* we want auto during upload phase).
*/
mac[port].speed = speed;
/* On P/Q/R/S, one can read from the device via the MAC reconfiguration
* tables. On E/T, MAC reconfig tables are not readable, only writable.
* We have to *know* what the MAC looks like. For the sake of keeping
* the code common, we'll use the static configuration tables as a
* reasonable approximation for both E/T and P/Q/R/S.
*/
dyn_mac = mac[port];
dyn_mac.ingress = enabled && mac[port].ingress;
dyn_mac.egress = enabled && mac[port].egress;
/* Write to the dynamic reconfiguration tables */
rc = sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG,
port, &dyn_mac, true);
rc = sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, port,
&mac[port], true);
if (rc < 0) {
dev_err(dev, "Failed to write MAC config: %d\n", rc);
return rc;
......@@ -767,9 +755,6 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port,
* the clock setup does interrupt the clock signal for a certain time
* which causes trouble for all PHYs relying on this signal.
*/
if (!enabled)
return 0;
phy_mode = mii->xmii_mode[port];
if (phy_mode != XMII_MODE_RGMII)
return 0;
......@@ -784,9 +769,24 @@ static void sja1105_mac_config(struct dsa_switch *ds, int port,
struct sja1105_private *priv = ds->priv;
if (!state->link)
sja1105_adjust_port_config(priv, port, SPEED_UNKNOWN, false);
else
sja1105_adjust_port_config(priv, port, state->speed, true);
return;
sja1105_adjust_port_config(priv, port, state->speed);
}
static void sja1105_mac_link_down(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface)
{
sja1105_inhibit_tx(ds->priv, BIT(port), true);
}
static void sja1105_mac_link_up(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface,
struct phy_device *phydev)
{
sja1105_inhibit_tx(ds->priv, BIT(port), false);
}
static void sja1105_phylink_validate(struct dsa_switch *ds, int port,
......@@ -1241,27 +1241,6 @@ static void sja1105_bridge_leave(struct dsa_switch *ds, int port,
sja1105_bridge_member(ds, port, br, false);
}
static u8 sja1105_stp_state_get(struct sja1105_private *priv, int port)
{
struct sja1105_mac_config_entry *mac;
mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries;
if (!mac[port].ingress && !mac[port].egress && !mac[port].dyn_learn)
return BR_STATE_BLOCKING;
if (mac[port].ingress && !mac[port].egress && !mac[port].dyn_learn)
return BR_STATE_LISTENING;
if (mac[port].ingress && !mac[port].egress && mac[port].dyn_learn)
return BR_STATE_LEARNING;
if (mac[port].ingress && mac[port].egress && mac[port].dyn_learn)
return BR_STATE_FORWARDING;
/* This is really an error condition if the MAC was in none of the STP
* states above. But treating the port as disabled does nothing, which
* is adequate, and it also resets the MAC to a known state later on.
*/
return BR_STATE_DISABLED;
}
/* For situations where we need to change a setting at runtime that is only
* available through the static configuration, resetting the switch in order
* to upload the new static config is unavoidable. Back up the settings we
......@@ -1272,27 +1251,18 @@ static int sja1105_static_config_reload(struct sja1105_private *priv)
{
struct sja1105_mac_config_entry *mac;
int speed_mbps[SJA1105_NUM_PORTS];
u8 stp_state[SJA1105_NUM_PORTS];
int rc, i;
mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries;
/* Back up settings changed by sja1105_adjust_port_config and
* sja1105_bridge_stp_state_set and restore their defaults.
/* Back up the dynamic link speed changed by sja1105_adjust_port_config
* in order to temporarily restore it to SJA1105_SPEED_AUTO - which the
* switch wants to see in the static config in order to allow us to
* change it through the dynamic interface later.
*/
for (i = 0; i < SJA1105_NUM_PORTS; i++) {
speed_mbps[i] = sja1105_speed[mac[i].speed];
mac[i].speed = SJA1105_SPEED_AUTO;
if (i == dsa_upstream_port(priv->ds, i)) {
mac[i].ingress = true;
mac[i].egress = true;
mac[i].dyn_learn = true;
} else {
stp_state[i] = sja1105_stp_state_get(priv, i);
mac[i].ingress = false;
mac[i].egress = false;
mac[i].dyn_learn = false;
}
}
/* Reset switch and send updated static configuration */
......@@ -1309,13 +1279,7 @@ static int sja1105_static_config_reload(struct sja1105_private *priv)
goto out;
for (i = 0; i < SJA1105_NUM_PORTS; i++) {
bool enabled = (speed_mbps[i] != SPEED_UNKNOWN);
if (i != dsa_upstream_port(priv->ds, i))
sja1105_bridge_stp_state_set(priv->ds, i, stp_state[i]);
rc = sja1105_adjust_port_config(priv, i, speed_mbps[i],
enabled);
rc = sja1105_adjust_port_config(priv, i, speed_mbps[i]);
if (rc < 0)
goto out;
}
......@@ -1921,6 +1885,8 @@ static const struct dsa_switch_ops sja1105_switch_ops = {
.set_ageing_time = sja1105_set_ageing_time,
.phylink_validate = sja1105_phylink_validate,
.phylink_mac_config = sja1105_mac_config,
.phylink_mac_link_up = sja1105_mac_link_up,
.phylink_mac_link_down = sja1105_mac_link_down,
.get_strings = sja1105_get_strings,
.get_ethtool_stats = sja1105_get_ethtool_stats,
.get_sset_count = sja1105_get_sset_count,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment