Merge bk://linux-scsi.bkbits.net/scsi-for-linus-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

drivers/base/Makefile

@@ -2,7 +2,8 @@
 
 obj-y			:= core.o sys.o interface.o bus.o \
 			   driver.o class.o class_simple.o platform.o \
-			   cpu.o firmware.o init.o map.o dmapool.o
+			   cpu.o firmware.o init.o map.o dmapool.o \
+			   attribute_container.o transport_class.o
 obj-y			+= power/
 obj-$(CONFIG_FW_LOADER)	+= firmware_class.o
 obj-$(CONFIG_NUMA)	+= node.o

drivers/base/attribute_container.c

+/*
+ * attribute_container.c - implementation of a simple container for classes
+ *
+ * Copyright (c) 2005 - James Bottomley <James.Bottomley@steeleye.com>
+ *
+ * This file is licensed under GPLv2
+ *
+ * The basic idea here is to enable a device to be attached to an
+ * aritrary numer of classes without having to allocate storage for them.
+ * Instead, the contained classes select the devices they need to attach
+ * to via a matching function.
+ */
+
+#include <linux/attribute_container.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/module.h>
+
+/* This is a private structure used to tie the classdev and the
+ * container .. it should never be visible outside this file */
+struct internal_container {
+	struct list_head node;
+	struct attribute_container *cont;
+	struct class_device classdev;
+};
+
+/**
+ * attribute_container_classdev_to_container - given a classdev, return the container
+ *
+ * @classdev: the class device created by attribute_container_add_device.
+ *
+ * Returns the container associated with this classdev.
+ */
+struct attribute_container *
+attribute_container_classdev_to_container(struct class_device *classdev)
+{
+	struct internal_container *ic =
+		container_of(classdev, struct internal_container, classdev);
+	return ic->cont;
+}
+EXPORT_SYMBOL_GPL(attribute_container_classdev_to_container);
+
+static struct list_head attribute_container_list;
+
+static DECLARE_MUTEX(attribute_container_mutex);
+
+/**
+ * attribute_container_register - register an attribute container
+ *
+ * @cont: The container to register.  This must be allocated by the
+ *        callee and should also be zeroed by it.
+ */
+int
+attribute_container_register(struct attribute_container *cont)
+{
+	INIT_LIST_HEAD(&cont->node);
+	INIT_LIST_HEAD(&cont->containers);
+		
+	down(&attribute_container_mutex);
+	list_add_tail(&cont->node, &attribute_container_list);
+	up(&attribute_container_mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(attribute_container_register);
+
+/**
+ * attribute_container_unregister - remove a container registration
+ *
+ * @cont: previously registered container to remove
+ */
+int
+attribute_container_unregister(struct attribute_container *cont)
+{
+	int retval = -EBUSY;
+	down(&attribute_container_mutex);
+	if (!list_empty(&cont->containers))
+		goto out;
+	retval = 0;
+	list_del(&cont->node);
+ out:
+	up(&attribute_container_mutex);
+	return retval;
+		
+}
+EXPORT_SYMBOL_GPL(attribute_container_unregister);
+
+/* private function used as class release */
+static void attribute_container_release(struct class_device *classdev)
+{
+	struct internal_container *ic 
+		= container_of(classdev, struct internal_container, classdev);
+	struct device *dev = classdev->dev;
+
+	kfree(ic);
+	put_device(dev);
+}
+
+/**
+ * attribute_container_add_device - see if any container is interested in dev
+ *
+ * @dev: device to add attributes to
+ * @fn:	 function to trigger addition of class device.
+ *
+ * This function allocates storage for the class device(s) to be
+ * attached to dev (one for each matching attribute_container).  If no
+ * fn is provided, the code will simply register the class device via
+ * class_device_add.  If a function is provided, it is expected to add
+ * the class device at the appropriate time.  One of the things that
+ * might be necessary is to allocate and initialise the classdev and
+ * then add it a later time.  To do this, call this routine for
+ * allocation and initialisation and then use
+ * attribute_container_device_trigger() to call class_device_add() on
+ * it.  Note: after this, the class device contains a reference to dev
+ * which is not relinquished until the release of the classdev.
+ */
+void
+attribute_container_add_device(struct device *dev,
+			       int (*fn)(struct attribute_container *,
+					 struct device *,
+					 struct class_device *))
+{
+	struct attribute_container *cont;
+
+	down(&attribute_container_mutex);
+	list_for_each_entry(cont, &attribute_container_list, node) {
+		struct internal_container *ic;
+
+		if (attribute_container_no_classdevs(cont))
+			continue;
+
+		if (!cont->match(cont, dev))
+			continue;
+		ic = kmalloc(sizeof(struct internal_container), GFP_KERNEL);
+		if (!ic) {
+			dev_printk(KERN_ERR, dev, "failed to allocate class container\n");
+			continue;
+		}
+		memset(ic, 0, sizeof(struct internal_container));
+		INIT_LIST_HEAD(&ic->node);
+		ic->cont = cont;
+		class_device_initialize(&ic->classdev);
+		ic->classdev.dev = get_device(dev);
+		ic->classdev.class = cont->class;
+		cont->class->release = attribute_container_release;
+		strcpy(ic->classdev.class_id, dev->bus_id);
+		if (fn)
+			fn(cont, dev, &ic->classdev);
+		else
+			class_device_add(&ic->classdev);
+		list_add_tail(&ic->node, &cont->containers);
+	}
+	up(&attribute_container_mutex);
+}
+
+/**
+ * attribute_container_remove_device - make device eligible for removal.
+ *
+ * @dev:  The generic device
+ * @fn:	  A function to call to remove the device
+ *
+ * This routine triggers device removal.  If fn is NULL, then it is
+ * simply done via class_device_unregister (note that if something
+ * still has a reference to the classdev, then the memory occupied
+ * will not be freed until the classdev is released).  If you want a
+ * two phase release: remove from visibility and then delete the
+ * device, then you should use this routine with a fn that calls
+ * class_device_del() and then use
+ * attribute_container_device_trigger() to do the final put on the
+ * classdev.
+ */
+void
+attribute_container_remove_device(struct device *dev,
+				  void (*fn)(struct attribute_container *,
+					     struct device *,
+					     struct class_device *))
+{
+	struct attribute_container *cont;
+
+	down(&attribute_container_mutex);
+	list_for_each_entry(cont, &attribute_container_list, node) {
+		struct internal_container *ic, *tmp;
+
+		if (attribute_container_no_classdevs(cont))
+			continue;
+
+		if (!cont->match(cont, dev))
+			continue;
+		list_for_each_entry_safe(ic, tmp, &cont->containers, node) {
+			if (dev != ic->classdev.dev)
+				continue;
+			list_del(&ic->node);
+			if (fn)
+				fn(cont, dev, &ic->classdev);
+			else
+				class_device_unregister(&ic->classdev);
+		}
+	}
+	up(&attribute_container_mutex);
+}
+EXPORT_SYMBOL_GPL(attribute_container_remove_device);
+
+/**
+ * attribute_container_device_trigger - execute a trigger for each matching classdev
+ *
+ * @dev:  The generic device to run the trigger for
+ * @fn	  the function to execute for each classdev.
+ *
+ * This funcion is for executing a trigger when you need to know both
+ * the container and the classdev.  If you only care about the
+ * container, then use attribute_container_trigger() instead.
+ */
+void
+attribute_container_device_trigger(struct device *dev, 
+				   int (*fn)(struct attribute_container *,
+					     struct device *,
+					     struct class_device *))
+{
+	struct attribute_container *cont;
+
+	down(&attribute_container_mutex);
+	list_for_each_entry(cont, &attribute_container_list, node) {
+		struct internal_container *ic, *tmp;
+
+		if (!cont->match(cont, dev))
+			continue;
+
+		list_for_each_entry_safe(ic, tmp, &cont->containers, node) {
+			if (dev == ic->classdev.dev)
+				fn(cont, dev, &ic->classdev);
+		}
+	}
+	up(&attribute_container_mutex);
+}
+EXPORT_SYMBOL_GPL(attribute_container_device_trigger);
+
+/**
+ * attribute_container_trigger - trigger a function for each matching container
+ *
+ * @dev:  The generic device to activate the trigger for
+ * @fn:	  the function to trigger
+ *
+ * This routine triggers a function that only needs to know the
+ * matching containers (not the classdev) associated with a device.
+ * It is more lightweight than attribute_container_device_trigger, so
+ * should be used in preference unless the triggering function
+ * actually needs to know the classdev.
+ */
+void
+attribute_container_trigger(struct device *dev,
+			    int (*fn)(struct attribute_container *,
+				      struct device *))
+{
+	struct attribute_container *cont;
+
+	down(&attribute_container_mutex);
+	list_for_each_entry(cont, &attribute_container_list, node) {
+		if (cont->match(cont, dev))
+			fn(cont, dev);
+	}
+	up(&attribute_container_mutex);
+}
+EXPORT_SYMBOL_GPL(attribute_container_trigger);
+     
+
+int __init
+attribute_container_init(void)
+{
+	INIT_LIST_HEAD(&attribute_container_list);
+	return 0;
+}

drivers/base/init.c

@@ -17,7 +17,7 @@ extern int firmware_init(void);
 extern int platform_bus_init(void);
 extern int system_bus_init(void);
 extern int cpu_dev_init(void);
-
+extern int attribute_container_init(void);
 /**
  *	driver_init - initialize driver model.
  *
@@ -39,4 +39,5 @@ void __init driver_init(void)
 	platform_bus_init();
 	system_bus_init();
 	cpu_dev_init();
+	attribute_container_init();
 }

drivers/base/transport_class.c

+/*
+ * transport_class.c - implementation of generic transport classes
+ *                     using attribute_containers
+ *
+ * Copyright (c) 2005 - James Bottomley <James.Bottomley@steeleye.com>
+ *
+ * This file is licensed under GPLv2
+ *
+ * The basic idea here is to allow any "device controller" (which
+ * would most often be a Host Bus Adapter" to use the services of one
+ * or more tranport classes for performing transport specific
+ * services.  Transport specific services are things that the generic
+ * command layer doesn't want to know about (speed settings, line
+ * condidtioning, etc), but which the user might be interested in.
+ * Thus, the HBA's use the routines exported by the transport classes
+ * to perform these functions.  The transport classes export certain
+ * values to the user via sysfs using attribute containers.
+ *
+ * Note: because not every HBA will care about every transport
+ * attribute, there's a many to one relationship that goes like this:
+ *
+ * transport class<-----attribute container<----class device
+ *
+ * Usually the attribute container is per-HBA, but the design doesn't
+ * mandate that.  Although most of the services will be specific to
+ * the actual external storage connection used by the HBA, the generic
+ * transport class is framed entirely in terms of generic devices to
+ * allow it to be used by any physical HBA in the system.
+ */
+#include <linux/attribute_container.h>
+#include <linux/transport_class.h>
+
+/**
+ * transport_class_register - register an initial transport class
+ *
+ * @tclass:	a pointer to the transport class structure to be initialised
+ *
+ * The transport class contains an embedded class which is used to
+ * identify it.  The caller should initialise this structure with
+ * zeros and then generic class must have been initialised with the
+ * actual transport class unique name.  There's a macro
+ * DECLARE_TRANSPORT_CLASS() to do this (declared classes still must
+ * be registered).
+ *
+ * Returns 0 on success or error on failure.
+ */
+int transport_class_register(struct transport_class *tclass)
+{
+	return class_register(&tclass->class);
+}
+EXPORT_SYMBOL_GPL(transport_class_register);
+
+/**
+ * transport_class_unregister - unregister a previously registered class
+ *
+ * @tclass: The transport class to unregister
+ *
+ * Must be called prior to deallocating the memory for the transport
+ * class.
+ */
+void transport_class_unregister(struct transport_class *tclass)
+{
+	class_unregister(&tclass->class);
+}
+EXPORT_SYMBOL_GPL(transport_class_unregister);
+
+static int anon_transport_dummy_function(struct device *dev)
+{
+	/* do nothing */
+	return 0;
+}
+
+/**
+ * anon_transport_class_register - register an anonymous class
+ *
+ * @atc: The anon transport class to register
+ *
+ * The anonymous transport class contains both a transport class and a
+ * container.  The idea of an anonymous class is that it never
+ * actually has any device attributes associated with it (and thus
+ * saves on container storage).  So it can only be used for triggering
+ * events.  Use prezero and then use DECLARE_ANON_TRANSPORT_CLASS() to
+ * initialise the anon transport class storage.
+ */
+int anon_transport_class_register(struct anon_transport_class *atc)
+{
+	int error;
+	atc->container.class = &atc->tclass.class;
+	attribute_container_set_no_classdevs(&atc->container);
+	error = attribute_container_register(&atc->container);
+	if (error)
+		return error;
+	atc->tclass.setup = anon_transport_dummy_function;
+	atc->tclass.remove = anon_transport_dummy_function;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(anon_transport_class_register);
+
+/**
+ * anon_transport_class_unregister - unregister an anon class
+ *
+ * @atc: Pointer to the anon transport class to unregister
+ *
+ * Must be called prior to deallocating the memory for the anon
+ * transport class.
+ */
+void anon_transport_class_unregister(struct anon_transport_class *atc)
+{
+	attribute_container_unregister(&atc->container);
+}
+EXPORT_SYMBOL_GPL(anon_transport_class_unregister);
+
+static int transport_setup_classdev(struct attribute_container *cont,
+				    struct device *dev,
+				    struct class_device *classdev)
+{
+	struct transport_class *tclass = class_to_transport_class(cont->class);
+
+	if (tclass->setup)
+		tclass->setup(dev);
+
+	return 0;
+}
+
+/**
+ * transport_setup_device - declare a new dev for transport class association
+ *			    but don't make it visible yet.
+ *
+ * @dev: the generic device representing the entity being added
+ *
+ * Usually, dev represents some component in the HBA system (either
+ * the HBA itself or a device remote across the HBA bus).  This
+ * routine is simply a trigger point to see if any set of transport
+ * classes wishes to associate with the added device.  This allocates
+ * storage for the class device and initialises it, but does not yet
+ * add it to the system or add attributes to it (you do this with
+ * transport_add_device).  If you have no need for a separate setup
+ * and add operations, use transport_register_device (see
+ * transport_class.h).
+ */
+
+void transport_setup_device(struct device *dev)
+{
+	attribute_container_add_device(dev, transport_setup_classdev);
+}
+EXPORT_SYMBOL_GPL(transport_setup_device);
+
+
+static int transport_add_classdev(struct attribute_container *cont,
+				  struct device *dev,
+				  struct class_device *classdev)
+{
+	struct class_device_attribute **attrs =	cont->attrs;
+	int i, error;
+
+	error = class_device_add(classdev);
+	if (error)
+		return error;
+	for (i = 0; attrs[i]; i++) {
+		error = class_device_create_file(classdev, attrs[i]);
+		if (error)
+			return error;
+	}
+
+	return 0;
+}
+
+/**
+ * transport_add_device - declare a new dev for transport class association
+ *
+ * @dev: the generic device representing the entity being added
+ *
+ * Usually, dev represents some component in the HBA system (either
+ * the HBA itself or a device remote across the HBA bus).  This
+ * routine is simply a trigger point used to add the device to the
+ * system and register attributes for it.
+ */
+
+void transport_add_device(struct device *dev)
+{
+	attribute_container_device_trigger(dev, transport_add_classdev);
+}
+EXPORT_SYMBOL_GPL(transport_add_device);
+
+static int transport_configure(struct attribute_container *cont,
+			       struct device *dev)
+{
+	struct transport_class *tclass = class_to_transport_class(cont->class);
+
+	if (tclass->configure)
+		tclass->configure(dev);
+
+	return 0;
+}
+
+/**
+ * transport_configure_device - configure an already set up device
+ *
+ * @dev: generic device representing device to be configured
+ *
+ * The idea of configure is simply to provide a point within the setup
+ * process to allow the transport class to extract information from a
+ * device after it has been setup.  This is used in SCSI because we
+ * have to have a setup device to begin using the HBA, but after we
+ * send the initial inquiry, we use configure to extract the device
+ * parameters.  The device need not have been added to be configured.
+ */
+void transport_configure_device(struct device *dev)
+{
+	attribute_container_trigger(dev, transport_configure);
+}
+EXPORT_SYMBOL_GPL(transport_configure_device);
+
+static int transport_remove_classdev(struct attribute_container *cont,
+				     struct device *dev,
+				     struct class_device *classdev)
+{
+	struct transport_class *tclass = class_to_transport_class(cont->class);
+
+	if (tclass->remove)
+		tclass->remove(dev);
+
+	return 0;
+}
+
+
+/**
+ * transport_remove_device - remove the visibility of a device
+ *
+ * @dev: generic device to remove
+ *
+ * This call removes the visibility of the device (to the user from
+ * sysfs), but does not destroy it.  To eliminate a device entirely
+ * you must also call transport_destroy_device.  If you don't need to
+ * do remove and destroy as separate operations, use
+ * transport_unregister_device() (see transport_class.h) which will
+ * perform both calls for you.
+ */
+void transport_remove_device(struct device *dev)
+{
+	attribute_container_device_trigger(dev, transport_remove_classdev);
+}
+EXPORT_SYMBOL_GPL(transport_remove_device);
+
+static void transport_destroy_classdev(struct attribute_container *cont,
+				      struct device *dev,
+				      struct class_device *classdev)
+{
+	struct transport_class *tclass = class_to_transport_class(cont->class);
+
+	if (tclass->remove != anon_transport_dummy_function)
+		class_device_put(classdev);
+}
+
+
+/**
+ * transport_destroy_device - destroy a removed device
+ *
+ * @dev: device to eliminate from the transport class.
+ *
+ * This call triggers the elimination of storage associated with the
+ * transport classdev.  Note: all it really does is relinquish a
+ * reference to the classdev.  The memory will not be freed until the
+ * last reference goes to zero.  Note also that the classdev retains a
+ * reference count on dev, so dev too will remain for as long as the
+ * transport class device remains around.
+ */
+void transport_destroy_device(struct device *dev)
+{
+	attribute_container_remove_device(dev, transport_destroy_classdev);
+}
+EXPORT_SYMBOL_GPL(transport_destroy_device);

drivers/scsi/Kconfig

@@ -225,14 +225,14 @@ config SGIWD93_SCSI
 
 config SCSI_DECNCR
 	tristate "DEC NCR53C94 Scsi Driver"
-	depends on DECSTATION && TC && SCSI
+	depends on MACH_DECSTATION && SCSI && TC
 	help
 	  Say Y here to support the NCR53C94 SCSI controller chips on IOASIC
 	  based TURBOchannel DECstations and TURBOchannel PMAZ-A cards.
 
 config SCSI_DECSII
 	tristate "DEC SII Scsi Driver"
-	depends on DECSTATION && SCSI
+	depends on MACH_DECSTATION && SCSI && MIPS32
 
 config BLK_DEV_3W_XXXX_RAID
 	tristate "3ware 5/6/7/8xxx ATA-RAID support"

drivers/scsi/NCR53C9x.c

@@ -290,7 +290,7 @@ static inline void esp_advance_phase(Scsi_Cmnd *s, int newphase)
 #endif
 
 #ifdef DEBUG_ESP_CMDS
-inline void esp_cmd(struct NCR_ESP *esp, struct ESP_regs *eregs,
+static inline void esp_cmd(struct NCR_ESP *esp, struct ESP_regs *eregs,
 			   unchar cmd)
 {
 	esp->espcmdlog[esp->espcmdent] = cmd;
@@ -505,7 +505,7 @@ static void esp_reset_esp(struct NCR_ESP *esp, struct ESP_regs *eregs)
 }
 
 /* This places the ESP into a known state at boot time. */
-static void esp_bootup_reset(struct NCR_ESP *esp, struct ESP_regs *eregs)
+void esp_bootup_reset(struct NCR_ESP *esp, struct ESP_regs *eregs)
 {
 	volatile unchar trash;
 

drivers/scsi/NCR53C9x.h

@@ -652,7 +652,7 @@ extern int nesps, esps_in_use, esps_running;
 
 
 /* External functions */
-extern void esp_cmd(struct NCR_ESP *esp, struct ESP_regs *eregs, unchar cmd);
+extern void esp_bootup_reset(struct NCR_ESP *esp, struct ESP_regs *eregs);
 extern struct NCR_ESP *esp_allocate(Scsi_Host_Template *, void *);
 extern void esp_deallocate(struct NCR_ESP *);
 extern void esp_release(void);

drivers/scsi/NCR_Q720.c

@@ -48,7 +48,7 @@ struct NCR_Q720_private {
 	struct Scsi_Host	*hosts[4];
 };
 
-struct scsi_host_template NCR_Q720_tpnt = {
+static struct scsi_host_template NCR_Q720_tpnt = {
 	.module			= THIS_MODULE,
 	.proc_name		= "NCR_Q720",
 };
@@ -345,7 +345,7 @@ NCR_Q720_remove(struct device *dev)
 
 static short NCR_Q720_id_table[] = { NCR_Q720_MCA_ID, 0 };
 
-struct mca_driver NCR_Q720_driver = {
+static struct mca_driver NCR_Q720_driver = {
 	.id_table = NCR_Q720_id_table,
 	.driver = {
 		.name		= "NCR_Q720",

drivers/scsi/aacraid/aachba.c

@@ -1029,6 +1029,114 @@ static int aac_write(struct scsi_cmnd * scsicmd, int cid)
 	return 0;
 }
 
+static void synchronize_callback(void *context, struct fib *fibptr)
+{
+	struct aac_synchronize_reply *synchronizereply;
+	struct scsi_cmnd *cmd;
+
+	cmd = context;
+
+	dprintk((KERN_DEBUG "synchronize_callback[cpu %d]: t = %ld.\n", 
+				smp_processor_id(), jiffies));
+	BUG_ON(fibptr == NULL);
+
+
+	synchronizereply = fib_data(fibptr);
+	if (le32_to_cpu(synchronizereply->status) == CT_OK)
+		cmd->result = DID_OK << 16 | 
+			COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+	else {
+		struct scsi_device *sdev = cmd->device;
+		struct aac_dev *dev = (struct aav_dev *)sdev->host->hostdata;
+		u32 cid = ID_LUN_TO_CONTAINER(sdev->id, sdev->lun);
+		printk(KERN_WARNING 
+		     "synchronize_callback: synchronize failed, status = %d\n",
+		     synchronizereply->status);
+		cmd->result = DID_OK << 16 | 
+			COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
+		set_sense((u8 *)&dev->fsa_dev[cid].sense_data,
+				    HARDWARE_ERROR,
+				    SENCODE_INTERNAL_TARGET_FAILURE,
+				    ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0,
+				    0, 0);
+		memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
+		  min(sizeof(dev->fsa_dev[cid].sense_data), 
+			  sizeof(cmd->sense_buffer)));
+	}
+
+	fib_complete(fibptr);
+	fib_free(fibptr);
+	aac_io_done(cmd);
+}
+
+static int aac_synchronize(struct scsi_cmnd *scsicmd, int cid)
+{
+	int status;
+	struct fib *cmd_fibcontext;
+	struct aac_synchronize *synchronizecmd;
+	struct scsi_cmnd *cmd;
+	struct scsi_device *sdev = scsicmd->device;
+	int active = 0;
+	unsigned long flags;
+
+	/*
+	 * Wait for all commands to complete to this specific
+	 * target (block).
+	 */
+	spin_lock_irqsave(&sdev->list_lock, flags);
+	list_for_each_entry(cmd, &sdev->cmd_list, list)
+		if (cmd != scsicmd && cmd->serial_number != 0) {
+			++active;
+			break;
+		}
+
+	spin_unlock_irqrestore(&sdev->list_lock, flags);
+
+	/*
+	 *	Yield the processor (requeue for later)
+	 */
+	if (active)
+		return SCSI_MLQUEUE_DEVICE_BUSY;
+
+	/*
+	 *	Alocate and initialize a Fib
+	 */
+	if (!(cmd_fibcontext = 
+	    fib_alloc((struct aac_dev *)scsicmd->device->host->hostdata))) 
+		return SCSI_MLQUEUE_HOST_BUSY;
+
+	fib_init(cmd_fibcontext);
+
+	synchronizecmd = fib_data(cmd_fibcontext);
+	synchronizecmd->command = cpu_to_le32(VM_ContainerConfig);
+	synchronizecmd->type = cpu_to_le32(CT_FLUSH_CACHE);
+	synchronizecmd->cid = cpu_to_le32(cid);
+	synchronizecmd->count = 
+	     cpu_to_le32(sizeof(((struct aac_synchronize_reply *)NULL)->data));
+
+	/*
+	 *	Now send the Fib to the adapter
+	 */
+	status = fib_send(ContainerCommand,
+		  cmd_fibcontext,
+		  sizeof(struct aac_synchronize),
+		  FsaNormal,
+		  0, 1,
+		  (fib_callback)synchronize_callback,
+		  (void *)scsicmd);
+
+	/*
+	 *	Check that the command queued to the controller
+	 */
+	if (status == -EINPROGRESS)
+		return 0;
+
+	printk(KERN_WARNING 
+		"aac_synchronize: fib_send failed with status: %d.\n", status);
+	fib_complete(cmd_fibcontext);
+	fib_free(cmd_fibcontext);
+	return SCSI_MLQUEUE_HOST_BUSY;
+}
 
 /**
  *	aac_scsi_cmd()		-	Process SCSI command
@@ -1274,6 +1382,11 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
 			ret = aac_write(scsicmd, cid);
 			spin_lock_irq(host->host_lock);
 			return ret;
+
+		case SYNCHRONIZE_CACHE:
+			/* Issue FIB to tell Firmware to flush it's cache */
+			return aac_synchronize(scsicmd, cid);
+			
 		default:
 			/*
 			 *	Unhandled commands

drivers/scsi/aacraid/aacraid.h

@@ -1069,6 +1069,30 @@ struct aac_write_reply
 	u32		committed;
 };
 
+#define CT_FLUSH_CACHE 129
+struct aac_synchronize {
+	u32		command;	/* VM_ContainerConfig */
+	u32		type;		/* CT_FLUSH_CACHE */
+	u32		cid;
+	u32		parm1;
+	u32		parm2;
+	u32		parm3;
+	u32		parm4;
+	u32		count;	/* sizeof(((struct aac_synchronize_reply *)NULL)->data) */
+};
+
+struct aac_synchronize_reply {
+	u32		dummy0;
+	u32		dummy1;
+	u32		status;	/* CT_OK */
+	u32		parm1;
+	u32		parm2;
+	u32		parm3;
+	u32		parm4;
+	u32		parm5;
+	u8		data[16];
+};
+
 struct aac_srb
 {
 	u32		function;

drivers/scsi/dpt_i2o.c

@@ -1178,7 +1178,6 @@ static int adpt_i2o_post_wait(adpt_hba* pHba, u32* msg, int len, int timeout)
 				// dangerous.
 				status = -ETIME;
 			}
-			schedule_timeout(timeout*HZ);
 		}
 		if(pHba->host)
 			spin_lock_irq(pHba->host->host_lock);

drivers/scsi/hosts.c

@@ -28,6 +28,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/completion.h>
+#include <linux/transport_class.h>
 
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
@@ -79,15 +80,8 @@ void scsi_remove_host(struct Scsi_Host *shost)
 
 	set_bit(SHOST_DEL, &shost->shost_state);
 
-	if (shost->transportt->host_destroy)
-		shost->transportt->host_destroy(shost);
+	transport_unregister_device(&shost->shost_gendev);
 	class_device_unregister(&shost->shost_classdev);
-	if (shost->transport_classdev.class) {
-		if (shost->transportt->host_statistics)
-			sysfs_remove_group(&shost->transport_classdev.kobj,
-				shost->transportt->host_statistics);
- 		class_device_unregister(&shost->transport_classdev);
-	}
 	device_del(&shost->shost_gendev);
 }
 EXPORT_SYMBOL(scsi_remove_host);
@@ -135,9 +129,6 @@ int scsi_add_host(struct Scsi_Host *shost, struct device *dev)
 					 GFP_KERNEL)) == NULL)
 		goto out_del_classdev;
 
-	if (shost->transportt->host_setup)
-		shost->transportt->host_setup(shost);
-
 	error = scsi_sysfs_add_host(shost);
 	if (error)
 		goto out_destroy_host;
@@ -146,8 +137,6 @@ int scsi_add_host(struct Scsi_Host *shost, struct device *dev)
 	return error;
 
  out_destroy_host:
-	if (shost->transportt->host_destroy)
-		shost->transportt->host_destroy(shost);
  out_del_classdev:
 	class_device_del(&shost->shost_classdev);
  out_del_gendev:
@@ -397,3 +386,9 @@ void scsi_exit_hosts(void)
 {
 	class_unregister(&shost_class);
 }
+
+int scsi_is_host_device(const struct device *dev)
+{
+	return dev->release == scsi_host_dev_release;
+}
+EXPORT_SYMBOL(scsi_is_host_device);

drivers/scsi/jazz_esp.c

@@ -6,6 +6,7 @@
  * jazz_esp is based on David S. Miller's ESP driver and cyber_esp
  */
 
+#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/types.h>
@@ -27,7 +28,7 @@
 #include <asm/pgtable.h>
 
 static int  dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
-static int  dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp);
+static int  dma_can_transfer(struct NCR_ESP *esp, struct scsi_cmnd *sp);
 static void dma_dump_state(struct NCR_ESP *esp);
 static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length);
 static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length);
@@ -36,11 +37,11 @@ static void dma_ints_on(struct NCR_ESP *esp);
 static int  dma_irq_p(struct NCR_ESP *esp);
 static int  dma_ports_p(struct NCR_ESP *esp);
 static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
-static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp);
-static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp);
-static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp);
-static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp);
-static void dma_advance_sg (Scsi_Cmnd *sp);
+static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp);
+static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp);
+static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp);
+static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp);
+static void dma_advance_sg (struct scsi_cmnd *sp);
 static void dma_led_off(struct NCR_ESP *);
 static void dma_led_on(struct NCR_ESP *);
 
@@ -52,7 +53,7 @@ static volatile unsigned char cmd_buffer[16];
 				 */
 
 /***************************************************************** Detection */
-int jazz_esp_detect(Scsi_Host_Template *tpnt)
+static int jazz_esp_detect(struct scsi_host_template *tpnt)
 {
     struct NCR_ESP *esp;
     struct ConfigDev *esp_dev;
@@ -115,7 +116,7 @@ int jazz_esp_detect(Scsi_Host_Template *tpnt)
 	esp->esp_command = (volatile unsigned char *)cmd_buffer;
 	
 	/* get virtual dma address for command buffer */
-	esp->esp_command_dvma = vdma_alloc(PHYSADDR(cmd_buffer), sizeof (cmd_buffer));
+	esp->esp_command_dvma = vdma_alloc(CPHYSADDR(cmd_buffer), sizeof (cmd_buffer));
 	
 	esp->irq = JAZZ_SCSI_IRQ;
 	request_irq(JAZZ_SCSI_IRQ, esp_intr, SA_INTERRUPT, "JAZZ SCSI",
@@ -157,7 +158,7 @@ static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
     return fifo_count;
 }
 
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp)
+static int dma_can_transfer(struct NCR_ESP *esp, struct scsi_cmnd *sp)
 {
     /*
      * maximum DMA size is 1MB
@@ -230,43 +231,43 @@ static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
     }
 }
 
-static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp)
+static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp)
 {
-    sp->SCp.have_data_in = vdma_alloc(PHYSADDR(sp->SCp.buffer), sp->SCp.this_residual);
+    sp->SCp.have_data_in = vdma_alloc(CPHYSADDR(sp->SCp.buffer), sp->SCp.this_residual);
     sp->SCp.ptr = (char *)((unsigned long)sp->SCp.have_data_in);
 }
 
-static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp)
+static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp)
 {
     int sz = sp->SCp.buffers_residual;
-    struct mmu_sglist *sg = (struct mmu_sglist *) sp->SCp.buffer;
+    struct scatterlist *sg = (struct scatterlist *) sp->SCp.buffer;
     
     while (sz >= 0) {
-	sg[sz].dvma_addr = vdma_alloc(PHYSADDR(sg[sz].addr), sg[sz].len);
+	sg[sz].dma_address = vdma_alloc(CPHYSADDR(page_address(sg[sz].page) + sg[sz].offset), sg[sz].length);
 	sz--;
     }
-    sp->SCp.ptr=(char *)((unsigned long)sp->SCp.buffer->dvma_address);
+    sp->SCp.ptr=(char *)(sp->SCp.buffer->dma_address);
 }    
 
-static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp)
+static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp)
 {
     vdma_free(sp->SCp.have_data_in);
 }
 
-static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp)
+static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp)
 {
     int sz = sp->use_sg - 1;
-    struct mmu_sglist *sg = (struct mmu_sglist *)sp->buffer;
+    struct scatterlist *sg = (struct scatterlist *)sp->buffer;
 			
     while(sz >= 0) {
-	vdma_free(sg[sz].dvma_addr);
+	vdma_free(sg[sz].dma_address);
 	sz--;
     }
 }
 
-static void dma_advance_sg (Scsi_Cmnd *sp)
+static void dma_advance_sg (struct scsi_cmnd *sp)
 {
-    sp->SCp.ptr = (char *)((unsigned long)sp->SCp.buffer->dvma_address);
+    sp->SCp.ptr = (char *)(sp->SCp.buffer->dma_address);
 }
 
 #define JAZZ_HDC_LED   0xe000d100 /* FIXME, find correct address */
@@ -285,9 +286,9 @@ static void dma_led_on(struct NCR_ESP *esp)
 #endif    
 }
 
-static Scsi_Host_Template driver_template = {
+static struct scsi_host_template driver_template = {
 	.proc_name		= "jazz_esp",
-	.proc_info		= &esp_proc_info,
+	.proc_info		= esp_proc_info,
 	.name			= "ESP 100/100a/200",
 	.detect			= jazz_esp_detect,
 	.slave_alloc		= esp_slave_alloc,
@@ -303,4 +304,4 @@ static Scsi_Host_Template driver_template = {
 	.cmd_per_lun		= 1,
 	.use_clustering		= DISABLE_CLUSTERING,
 };
-
+#include "scsi_module.c"

drivers/scsi/oktagon_esp.c

@@ -72,8 +72,6 @@ static void dma_mmu_release_scsi_sgl(struct NCR_ESP *,Scsi_Cmnd *);
 static void dma_advance_sg(Scsi_Cmnd *);
 static int  oktagon_notify_reboot(struct notifier_block *this, unsigned long code, void *x);
 
-void esp_bootup_reset(struct NCR_ESP *esp,struct ESP_regs *eregs);
-
 #ifdef USE_BOTTOM_HALF
 static void dma_commit(void *opaque);
 

drivers/scsi/osst.h

@@ -518,7 +518,7 @@ struct osst_buffer {
   int writing;
   int midlevel_result;
   int syscall_result;
-  Scsi_Request *last_SRpnt;
+  struct scsi_request *last_SRpnt;
   unsigned char *b_data;
   os_aux_t *aux;               /* onstream AUX structure at end of each block     */
   unsigned short use_sg;       /* zero or number of s/g segments for this adapter */
@@ -531,7 +531,7 @@ struct osst_buffer {
 struct osst_tape {
   struct scsi_driver *driver;
   unsigned capacity;
-  Scsi_Device* device;
+  struct scsi_device *device;
   struct semaphore lock;       /* for serialization */
   struct completion wait;      /* for SCSI commands */
   struct osst_buffer * buffer;

drivers/scsi/scsi_debug.c

@@ -11,7 +11,7 @@
  *  (or disk like devices) sharing a common amount of RAM
  *
  *
- *  For documentation see http://www.torque.net/sg/sdebug25.html
+ *  For documentation see http://www.torque.net/sg/sdebug26.html
  *
  *   D. Gilbert (dpg) work for Magneto-Optical device test [20010421]
  *   dpg: work for devfs large number of disks [20010809]
@@ -56,7 +56,7 @@
 #include "scsi_debug.h"
 
 #define SCSI_DEBUG_VERSION "1.75"
-static const char * scsi_debug_version_date = "20041023";
+static const char * scsi_debug_version_date = "20050113";
 
 /* Additional Sense Code (ASC) used */
 #define NO_ADDED_SENSE 0x0
@@ -1675,6 +1675,7 @@ static void do_create_driverfs_files(void)
 	driver_create_file(&sdebug_driverfs_driver, &driver_attr_add_host);
 	driver_create_file(&sdebug_driverfs_driver, &driver_attr_delay);
 	driver_create_file(&sdebug_driverfs_driver, &driver_attr_dev_size_mb);
+	driver_create_file(&sdebug_driverfs_driver, &driver_attr_dsense);
 	driver_create_file(&sdebug_driverfs_driver, &driver_attr_every_nth);
 	driver_create_file(&sdebug_driverfs_driver, &driver_attr_max_luns);
 	driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_tgts);
@@ -1693,6 +1694,7 @@ static void do_remove_driverfs_files(void)
 	driver_remove_file(&sdebug_driverfs_driver, &driver_attr_num_tgts);
 	driver_remove_file(&sdebug_driverfs_driver, &driver_attr_max_luns);
 	driver_remove_file(&sdebug_driverfs_driver, &driver_attr_every_nth);
+	driver_remove_file(&sdebug_driverfs_driver, &driver_attr_dsense);
 	driver_remove_file(&sdebug_driverfs_driver, &driver_attr_dev_size_mb);
 	driver_remove_file(&sdebug_driverfs_driver, &driver_attr_delay);
 	driver_remove_file(&sdebug_driverfs_driver, &driver_attr_add_host);

drivers/scsi/scsi_error.c

@@ -1948,3 +1948,96 @@ int scsi_command_normalize_sense(struct scsi_cmnd *cmd,
 			sizeof(cmd->sense_buffer), sshdr);
 }
 EXPORT_SYMBOL(scsi_command_normalize_sense);
+
+/**
+ * scsi_sense_desc_find - search for a given descriptor type in
+ *			descriptor sense data format.
+ *
+ * @sense_buffer:	byte array of descriptor format sense data
+ * @sb_len:		number of valid bytes in sense_buffer
+ * @desc_type:		value of descriptor type to find
+ *			(e.g. 0 -> information)
+ *
+ * Notes:
+ *	only valid when sense data is in descriptor format
+ *
+ * Return value:
+ *	pointer to start of (first) descriptor if found else NULL
+ **/
+const u8 * scsi_sense_desc_find(const u8 * sense_buffer, int sb_len,
+				int desc_type)
+{
+	int add_sen_len, add_len, desc_len, k;
+	const u8 * descp;
+
+	if ((sb_len < 8) || (0 == (add_sen_len = sense_buffer[7])))
+		return NULL;
+	if ((sense_buffer[0] < 0x72) || (sense_buffer[0] > 0x73))
+		return NULL;
+	add_sen_len = (add_sen_len < (sb_len - 8)) ?
+			add_sen_len : (sb_len - 8);
+	descp = &sense_buffer[8];
+	for (desc_len = 0, k = 0; k < add_sen_len; k += desc_len) {
+		descp += desc_len;
+		add_len = (k < (add_sen_len - 1)) ? descp[1]: -1;
+		desc_len = add_len + 2;
+		if (descp[0] == desc_type)
+			return descp;
+		if (add_len < 0) // short descriptor ??
+			break;
+	}
+	return NULL;
+}
+EXPORT_SYMBOL(scsi_sense_desc_find);
+
+/**
+ * scsi_get_sense_info_fld - attempts to get information field from
+ *			sense data (either fixed or descriptor format)
+ *
+ * @sense_buffer:	byte array of sense data
+ * @sb_len:		number of valid bytes in sense_buffer
+ * @info_out:		pointer to 64 integer where 8 or 4 byte information
+ *			field will be placed if found.
+ *
+ * Return value:
+ *	1 if information field found, 0 if not found.
+ **/
+int scsi_get_sense_info_fld(const u8 * sense_buffer, int sb_len,
+			    u64 * info_out)
+{
+	int j;
+	const u8 * ucp;
+	u64 ull;
+
+	if (sb_len < 7)
+		return 0;
+	switch (sense_buffer[0] & 0x7f) {
+	case 0x70:
+	case 0x71:
+		if (sense_buffer[0] & 0x80) {
+			*info_out = (sense_buffer[3] << 24) +
+				    (sense_buffer[4] << 16) +
+				    (sense_buffer[5] << 8) + sense_buffer[6];
+			return 1;
+		} else
+			return 0;
+	case 0x72:
+	case 0x73:
+		ucp = scsi_sense_desc_find(sense_buffer, sb_len,
+					   0 /* info desc */);
+		if (ucp && (0xa == ucp[1])) {
+			ull = 0;
+			for (j = 0; j < 8; ++j) {
+				if (j > 0)
+					ull <<= 8;
+				ull |= ucp[4 + j];
+			}
+			*info_out = ull;
+			return 1;
+		} else
+			return 0;
+	default:
+		return 0;
+	}
+}
+EXPORT_SYMBOL(scsi_get_sense_info_fld);

drivers/scsi/scsi_lib.c

@@ -498,19 +498,17 @@ void scsi_run_host_queues(struct Scsi_Host *shost)
 /*
  * Function:    scsi_end_request()
  *
- * Purpose:     Post-processing of completed commands called from interrupt
- *              handler or a bottom-half handler.
+ * Purpose:     Post-processing of completed commands (usually invoked at end
+ *		of upper level post-processing and scsi_io_completion).
  *
  * Arguments:   cmd	 - command that is complete.
- *              uptodate - 1 if I/O indicates success, 0 for I/O error.
- *              sectors  - number of sectors we want to mark.
+ *              uptodate - 1 if I/O indicates success, <= 0 for I/O error.
+ *              bytes    - number of bytes of completed I/O
  *		requeue  - indicates whether we should requeue leftovers.
- *		frequeue - indicates that if we release the command block
- *			   that the queue request function should be called.
  *
  * Lock status: Assumed that lock is not held upon entry.
  *
- * Returns:     Nothing
+ * Returns:     cmd if requeue done or required, NULL otherwise
  *
  * Notes:       This is called for block device requests in order to
  *              mark some number of sectors as complete.
@@ -694,8 +692,9 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
 	int this_count = cmd->bufflen;
 	request_queue_t *q = cmd->device->request_queue;
 	struct request *req = cmd->request;
-	int clear_errors = 1;
 	struct scsi_sense_hdr sshdr;
+	int sense_valid = 0;
+	int sense_deferred = 0;
 
 	/*
 	 * Free up any indirection buffers we allocated for DMA purposes. 
@@ -714,11 +713,15 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
 		kfree(cmd->buffer);
 	}
 
+	if (result) {
+		sense_valid = scsi_command_normalize_sense(cmd, &sshdr);
+		if (sense_valid)
+			sense_deferred = scsi_sense_is_deferred(&sshdr);
+	}
 	if (blk_pc_request(req)) { /* SG_IO ioctl from block level */
 		req->errors = result;
 		if (result) {
-			clear_errors = 0;
-			if (scsi_command_normalize_sense(cmd, &sshdr)) {
+			if (sense_valid) {
 				/*
 				 * SG_IO wants current and deferred errors
 				 */
@@ -742,6 +745,11 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
 	cmd->request_buffer = NULL;
 	cmd->request_bufflen = 0;
 
+	if (blk_pc_request(req)) { /* SG_IO ioctl from block level */
+		scsi_end_request(cmd, 1, good_bytes, 0);
+		return;
+	}
+
 	/*
 	 * Next deal with any sectors which we were able to correctly
 	 * handle.
@@ -751,8 +759,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
 					      req->nr_sectors, good_bytes));
 		SCSI_LOG_HLCOMPLETE(1, printk("use_sg is %d\n", cmd->use_sg));
 
-		if (clear_errors)
-			req->errors = 0;
+		req->errors = 0;
 		/*
 		 * If multiple sectors are requested in one buffer, then
 		 * they will have been finished off by the first command.
@@ -779,52 +786,37 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
 	 * sense buffer.  We can extract information from this, so we
 	 * can choose a block to remap, etc.
 	 */
-	if (driver_byte(result) != 0) {
-		if (scsi_command_normalize_sense(cmd, &sshdr) &&
-				!scsi_sense_is_deferred(&sshdr)) {
-			/*
-			 * If the device is in the process of becoming ready,
-			 * retry.
-			 */
-			if (sshdr.asc == 0x04 && sshdr.ascq == 0x01) {
+	if (sense_valid && !sense_deferred) {
+		switch (sshdr.sense_key) {
+		case UNIT_ATTENTION:
+			if (cmd->device->removable) {
+				/* detected disc change.  set a bit 
+				 * and quietly refuse further access.
+				 */
+				cmd->device->changed = 1;
+				cmd = scsi_end_request(cmd, 0,
+						this_count, 1);
+				return;
+			} else {
+				/*
+				* Must have been a power glitch, or a
+				* bus reset.  Could not have been a
+				* media change, so we just retry the
+				* request and see what happens.  
+				*/
 				scsi_requeue_command(q, cmd);
 				return;
 			}
-			if (sshdr.sense_key == UNIT_ATTENTION) {
-				if (cmd->device->removable) {
-					/* detected disc change.  set a bit 
-					 * and quietly refuse further access.
-		 			 */
-					cmd->device->changed = 1;
-					cmd = scsi_end_request(cmd, 0,
-							this_count, 1);
-					return;
-				} else {
-					/*
-				 	* Must have been a power glitch, or a
-				 	* bus reset.  Could not have been a
-				 	* media change, so we just retry the
-				 	* request and see what happens.  
-				 	*/
-					scsi_requeue_command(q, cmd);
-					return;
-				}
-			}
-		}
-		/*
-		 * If we had an ILLEGAL REQUEST returned, then we may have
-		 * performed an unsupported command.  The only thing this
-		 * should be would be a ten byte read where only a six byte
-		 * read was supported.  Also, on a system where READ CAPACITY
-		 * failed, we may have read past the end of the disk.
-		 */
-
-		/*
-		 * XXX: Following is probably broken since deferred errors
-		 *	fall through [dpg 20040827]
-		 */
-		switch (sshdr.sense_key) {
+			break;
 		case ILLEGAL_REQUEST:
+			/*
+		 	* If we had an ILLEGAL REQUEST returned, then we may
+		 	* have performed an unsupported command.  The only
+		 	* thing this should be would be a ten byte read where
+			* only a six byte read was supported.  Also, on a
+			* system where READ CAPACITY failed, we may have read
+			* past the end of the disk.
+		 	*/
 			if (cmd->device->use_10_for_rw &&
 			    (cmd->cmnd[0] == READ_10 ||
 			     cmd->cmnd[0] == WRITE_10)) {
@@ -841,6 +833,14 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
 			}
 			break;
 		case NOT_READY:
+			/*
+			 * If the device is in the process of becoming ready,
+			 * retry.
+			 */
+			if (sshdr.asc == 0x04 && sshdr.ascq == 0x01) {
+				scsi_requeue_command(q, cmd);
+				return;
+			}
 			printk(KERN_INFO "Device %s not ready.\n",
 			       req->rq_disk ? req->rq_disk->disk_name : "");
 			cmd = scsi_end_request(cmd, 0, this_count, 1);

drivers/scsi/scsi_priv.h

@@ -146,7 +146,7 @@ extern int scsi_sysfs_add_sdev(struct scsi_device *);
 extern int scsi_sysfs_add_host(struct Scsi_Host *);
 extern int scsi_sysfs_register(void);
 extern void scsi_sysfs_unregister(void);
-extern int scsi_sysfs_device_initialize(struct scsi_device *);
+extern void scsi_sysfs_device_initialize(struct scsi_device *);
 extern int scsi_sysfs_target_initialize(struct scsi_device *);
 extern struct scsi_transport_template blank_transport_template;
 

drivers/scsi/scsi_scan.c

@@ -254,10 +254,7 @@ static struct scsi_device *scsi_alloc_sdev(struct Scsi_Host *shost,
 	sdev->request_queue->queuedata = sdev;
 	scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
 
-	if (shost->transportt->device_setup) {
-		if (shost->transportt->device_setup(sdev))
-			goto out_free_queue;
-	}
+	scsi_sysfs_device_initialize(sdev);
 
 	if (shost->hostt->slave_alloc) {
 		ret = shost->hostt->slave_alloc(sdev);
@@ -272,10 +269,6 @@ static struct scsi_device *scsi_alloc_sdev(struct Scsi_Host *shost,
 		}
 	}
 
-	if (scsi_sysfs_device_initialize(sdev) != 0)
-		goto out_cleanup_slave;
-
-
 	/* NOTE: this target initialisation code depends critically on
 	 * lun scanning being sequential. */
 	if (scsi_sysfs_target_initialize(sdev))
@@ -288,13 +281,11 @@ static struct scsi_device *scsi_alloc_sdev(struct Scsi_Host *shost,
 	list_del(&sdev->siblings);
 	list_del(&sdev->same_target_siblings);
 	spin_unlock_irqrestore(shost->host_lock, flags);
-out_cleanup_slave:
+
 	if (shost->hostt->slave_destroy)
 		shost->hostt->slave_destroy(sdev);
 out_device_destroy:
-	if (shost->transportt->device_destroy)
-		shost->transportt->device_destroy(sdev);
-out_free_queue:
+	transport_destroy_device(&sdev->sdev_gendev);
 	scsi_free_queue(sdev->request_queue);
 out_free_dev:
 	kfree(sdev);
@@ -629,8 +620,7 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags)
 	if (*bflags & BLIST_NOT_LOCKABLE)
 		sdev->lockable = 0;
 
-	if (sdev->host->transportt->device_configure)
-		sdev->host->transportt->device_configure(sdev);
+	transport_configure_device(&sdev->sdev_gendev);
 
 	if (sdev->host->hostt->slave_configure)
 		sdev->host->hostt->slave_configure(sdev);
@@ -749,8 +739,7 @@ static int scsi_probe_and_add_lun(struct Scsi_Host *host,
 	} else {
 		if (sdev->host->hostt->slave_destroy)
 			sdev->host->hostt->slave_destroy(sdev);
-		if (sdev->host->transportt->device_destroy)
-			sdev->host->transportt->device_destroy(sdev);
+		transport_destroy_device(&sdev->sdev_gendev);
 		put_device(&sdev->sdev_gendev);
 	}
  out:
@@ -1330,8 +1319,7 @@ void scsi_free_host_dev(struct scsi_device *sdev)
 
 	if (sdev->host->hostt->slave_destroy)
 		sdev->host->hostt->slave_destroy(sdev);
-	if (sdev->host->transportt->device_destroy)
-		sdev->host->transportt->device_destroy(sdev);
+	transport_destroy_device(&sdev->sdev_gendev);
 	put_device(&sdev->sdev_gendev);
 }
 EXPORT_SYMBOL(scsi_free_host_dev);

drivers/scsi/scsi_sysfs.c

@@ -170,14 +170,12 @@ void scsi_device_dev_release(struct device *dev)
 
 	if (delete) {
 		struct scsi_target *starget = to_scsi_target(parent);
-		struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
 		if (!starget->create) {
-			if (shost->transportt->target_destroy)
-				shost->transportt->target_destroy(starget);
+			transport_remove_device(&starget->dev);
 			device_del(parent);
-			if (starget->transport_classdev.class)
-				class_device_unregister(&starget->transport_classdev);
 		}
+		transport_destroy_device(&starget->dev);
+
 		put_device(parent);
 	}
 	if (sdev->request_queue)
@@ -553,7 +551,6 @@ static void scsi_target_dev_release(struct device *dev)
  **/
 int scsi_sysfs_add_sdev(struct scsi_device *sdev)
 {
-	struct class_device_attribute **attrs;
 	struct scsi_target *starget = sdev->sdev_target;
 	struct Scsi_Host *shost = sdev->host;
 	int error, i, create;
@@ -570,31 +567,7 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
 			printk(KERN_ERR "Target device_add failed\n");
 			return error;
 		}
-		if (starget->transport_classdev.class) {
-			int i;
-			struct class_device_attribute **attrs =
-				sdev->host->transportt->target_attrs;
-
-			error = class_device_add(&starget->transport_classdev);
-			if (error) {
-				dev_printk(KERN_ERR, &starget->dev,
-					   "Target transport add failed\n");
-				return error;
-			}
-
-			/* take a reference for the transport_classdev; this
-			 * is released by the transport_class .release */
-			get_device(&starget->dev);
-			for (i = 0; attrs[i]; i++) {
-				error = class_device_create_file(&starget->transport_classdev,
-								 attrs[i]);
-				if (error) {
-					dev_printk(KERN_ERR, &starget->dev,
-						   "Target transport attr add failed\n");
-					return error;
-				}
-			}
-		}
+		transport_add_device(&starget->dev);
 	}
 
 	if ((error = scsi_device_set_state(sdev, SDEV_RUNNING)) != 0)
@@ -606,25 +579,15 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
 		printk(KERN_INFO "error 1\n");
 		return error;
 	}
-
 	error = class_device_add(&sdev->sdev_classdev);
 	if (error) {
 		printk(KERN_INFO "error 2\n");
 		goto clean_device;
 	}
+
 	/* take a reference for the sdev_classdev; this is
 	 * released by the sdev_class .release */
 	get_device(&sdev->sdev_gendev);
-	if (sdev->transport_classdev.class) {
-		error = class_device_add(&sdev->transport_classdev);
-		if (error)
-			goto clean_device2;
-		/* take a reference for the transport_classdev; this
-		 * is released by the transport_class .release */
-		get_device(&sdev->sdev_gendev);
-		
-	}
-
 	if (sdev->host->hostt->sdev_attrs) {
 		for (i = 0; sdev->host->hostt->sdev_attrs[i]; i++) {
 			error = attr_add(&sdev->sdev_gendev,
@@ -650,27 +613,16 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
 		}
 	}
 
- 	if (sdev->transport_classdev.class) {
- 		attrs = sdev->host->transportt->device_attrs;
- 		for (i = 0; attrs[i]; i++) {
- 			error = class_device_create_file(&sdev->transport_classdev,
- 							 attrs[i]);
- 			if (error) {
- 				scsi_remove_device(sdev);
-				goto out;
-			}
- 		}
- 	}
-
+	transport_add_device(&sdev->sdev_gendev);
  out:
 	return error;
 
- clean_device2:
 	class_device_del(&sdev->sdev_classdev);
  clean_device:
 	scsi_device_set_state(sdev, SDEV_CANCEL);
 
 	device_del(&sdev->sdev_gendev);
+	transport_destroy_device(&sdev->sdev_gendev);
 	put_device(&sdev->sdev_gendev);
 
 	return error;
@@ -689,14 +641,11 @@ void scsi_remove_device(struct scsi_device *sdev)
 		goto out;
 
 	class_device_unregister(&sdev->sdev_classdev);
-	if (sdev->transport_classdev.class)
-		class_device_unregister(&sdev->transport_classdev);
 	device_del(&sdev->sdev_gendev);
 	scsi_device_set_state(sdev, SDEV_DEL);
 	if (sdev->host->hostt->slave_destroy)
 		sdev->host->hostt->slave_destroy(sdev);
-	if (sdev->host->transportt->device_destroy)
-		sdev->host->transportt->device_destroy(sdev);
+	transport_unregister_device(&sdev->sdev_gendev);
 	put_device(&sdev->sdev_gendev);
 
 out:
@@ -786,41 +735,11 @@ int scsi_sysfs_add_host(struct Scsi_Host *shost)
 		}
 	}
 
-	class_device_initialize(&shost->transport_classdev);
-	shost->transport_classdev.class = shost->transportt->host_class;
-	shost->transport_classdev.dev = &shost->shost_gendev;
-	snprintf(shost->transport_classdev.class_id, BUS_ID_SIZE,
-		 "host%d", shost->host_no);
-
-	if (shost->transport_classdev.class) {
-		struct class_device_attribute **attrs =
-			shost->transportt->host_attrs;
-		error = class_device_add(&shost->transport_classdev);
-		if (error)
-			return error;
-		/* take a reference for the transport_classdev; this
-		 * is released by the transport_class .release */
-		get_device(&shost->shost_gendev);
-		for (i = 0; attrs[i]; i++) {
- 			error = class_device_create_file(&shost->transport_classdev,
- 							 attrs[i]);
- 			if (error)
-				return error;
- 		}
-
-		if (shost->transportt->host_statistics) {
-			error = sysfs_create_group(
-					&shost->transport_classdev.kobj,
-					shost->transportt->host_statistics);
-			if (error)
-				return error;
-		}
- 	}
-
+	transport_register_device(&shost->shost_gendev);
 	return 0;
 }
 
-int scsi_sysfs_device_initialize(struct scsi_device *sdev)
+void scsi_sysfs_device_initialize(struct scsi_device *sdev)
 {
 	device_initialize(&sdev->sdev_gendev);
 	sdev->sdev_gendev.bus = &scsi_bus_type;
@@ -836,14 +755,14 @@ int scsi_sysfs_device_initialize(struct scsi_device *sdev)
 		 "%d:%d:%d:%d", sdev->host->host_no,
 		 sdev->channel, sdev->id, sdev->lun);
 
-	class_device_initialize(&sdev->transport_classdev);
-	sdev->transport_classdev.dev = &sdev->sdev_gendev;
-	sdev->transport_classdev.class = sdev->host->transportt->device_class;
-	snprintf(sdev->transport_classdev.class_id, BUS_ID_SIZE,
-		 "%d:%d:%d:%d", sdev->host->host_no,
-		 sdev->channel, sdev->id, sdev->lun);
-	return 0;
+	transport_setup_device(&sdev->sdev_gendev);
+}
+
+int scsi_is_sdev_device(const struct device *dev)
+{
+	return dev->release == scsi_device_dev_release;
 }
+EXPORT_SYMBOL(scsi_is_sdev_device);
 
 int scsi_sysfs_target_initialize(struct scsi_device *sdev)
 {
@@ -886,12 +805,6 @@ int scsi_sysfs_target_initialize(struct scsi_device *sdev)
 		dev->release = scsi_target_dev_release;
 		sprintf(dev->bus_id, "target%d:%d:%d",
 			shost->host_no, sdev->channel, sdev->id);
-		class_device_initialize(&starget->transport_classdev);
-		starget->transport_classdev.dev = &starget->dev;
-		starget->transport_classdev.class = shost->transportt->target_class;
-		snprintf(starget->transport_classdev.class_id, BUS_ID_SIZE,
-			 "target%d:%d:%d",
-			 shost->host_no, sdev->channel, sdev->id);
 		starget->id = sdev->id;
 		starget->channel = sdev->channel;
 		create = starget->create = 1;
@@ -907,11 +820,17 @@ int scsi_sysfs_target_initialize(struct scsi_device *sdev)
 	sdev->sdev_target = starget;
 	list_add_tail(&sdev->siblings, &shost->__devices);
 	spin_unlock_irqrestore(shost->host_lock, flags);
-	if (create && shost->transportt->target_setup)
-		shost->transportt->target_setup(starget);
+	if (create)
+		transport_setup_device(&starget->dev);
 	return 0;
 }
 
+int scsi_is_target_device(const struct device *dev)
+{
+	return dev->release == scsi_target_dev_release;
+}
+EXPORT_SYMBOL(scsi_is_target_device);
+
 /* A blank transport template that is used in drivers that don't
  * yet implement Transport Attributes */
 struct scsi_transport_template blank_transport_template = { NULL, };

drivers/scsi/scsi_transport_fc.c

@@ -180,8 +180,6 @@ show_fc_fc4s (char *buf, u8 *fc4_list)
 
 
 
-static void transport_class_release(struct class_device *class_dev);
-static void host_class_release(struct class_device *class_dev);
 static void fc_timeout_blocked_host(void *data);
 static void fc_timeout_blocked_tgt(void *data);
 
@@ -207,32 +205,9 @@ struct fc_internal {
 
 #define to_fc_internal(tmpl)	container_of(tmpl, struct fc_internal, t)
 
-struct class fc_transport_class = {
-	.name = "fc_transport",
-	.release = transport_class_release,
-};
-
-struct class fc_host_class = {
-	.name = "fc_host",
-	.release = host_class_release,
-};
-
-static __init int fc_transport_init(void)
-{
-	int error = class_register(&fc_host_class);
-	if (error)
-		return error;
-	return class_register(&fc_transport_class);
-}
-
-static void __exit fc_transport_exit(void)
-{
-	class_unregister(&fc_transport_class);
-	class_unregister(&fc_host_class);
-}
-
-static int fc_setup_starget_transport_attrs(struct scsi_target *starget)
+static int fc_add_target(struct device *dev)
 {
+	struct scsi_target *starget = to_scsi_target(dev);
 	/* 
 	 * Set default values easily detected by the midlayer as
 	 * failure cases.  The scsi lldd is responsible for initializing
@@ -247,15 +222,24 @@ static int fc_setup_starget_transport_attrs(struct scsi_target *starget)
 	return 0;
 }
 
-static void fc_destroy_starget(struct scsi_target *starget)
+static int fc_remove_target(struct device *dev)
 {
+	struct scsi_target *starget = to_scsi_target(dev);
 	/* Stop the target timer */
 	if (cancel_delayed_work(&fc_starget_dev_loss_work(starget)))
 		flush_scheduled_work();
+	return 0;
 }
 
-static int fc_setup_host_transport_attrs(struct Scsi_Host *shost)
+static DECLARE_TRANSPORT_CLASS(fc_transport_class,
+			       "fc_transport",
+			       fc_add_target,
+			       fc_remove_target,
+			       NULL);
+
+static int fc_add_host(struct device *dev)
 {
+	struct Scsi_Host *shost = dev_to_shost(dev);
 	/* 
 	 * Set default values easily detected by the midlayer as
 	 * failure cases.  The scsi lldd is responsible for initializing
@@ -297,26 +281,35 @@ static int fc_setup_host_transport_attrs(struct Scsi_Host *shost)
 	return 0;
 }
 
-static void fc_destroy_host(struct Scsi_Host *shost)
+static int fc_remove_host(struct device *dev)
 {
+	struct Scsi_Host *shost = dev_to_shost(dev);
 	/* Stop the host timer */
 	if (cancel_delayed_work(&fc_host_link_down_work(shost)))
 		flush_scheduled_work();
+	return 0;
 }
 
-static void transport_class_release(struct class_device *class_dev)
+static DECLARE_TRANSPORT_CLASS(fc_host_class,
+			       "fc_host",
+			       fc_add_host,
+			       fc_remove_host,
+			       NULL);
+
+static __init int fc_transport_init(void)
 {
-	struct scsi_target *starget = transport_class_to_starget(class_dev);
-	put_device(&starget->dev);
+	int error = transport_class_register(&fc_host_class);
+	if (error)
+		return error;
+	return transport_class_register(&fc_transport_class);
 }
 
-static void host_class_release(struct class_device *class_dev)
+static void __exit fc_transport_exit(void)
 {
-	struct Scsi_Host *shost = transport_class_to_shost(class_dev);
-	put_device(&shost->shost_gendev);
+	transport_class_unregister(&fc_transport_class);
+	transport_class_unregister(&fc_host_class);
 }
 
-
 /*
  * Remote Port (Target) Attribute Management
  */
@@ -731,6 +724,35 @@ static struct attribute_group fc_statistics_group = {
 	.attrs = fc_statistics_attrs,
 };
 
+static int fc_host_match(struct attribute_container *cont,
+			  struct device *dev)
+{
+	struct Scsi_Host *shost;
+
+	if (!scsi_is_host_device(dev))
+		return 0;
+
+	shost = dev_to_shost(dev);
+	if (!shost->transportt  || shost->transportt->host_attrs.class
+	    != &fc_host_class.class)
+		return 0;
+	return 1;
+}
+
+static int fc_target_match(struct attribute_container *cont,
+			    struct device *dev)
+{
+	struct Scsi_Host *shost;
+
+	if (!scsi_is_target_device(dev))
+		return 0;
+
+	shost = dev_to_shost(dev->parent);
+	if (!shost->transportt  || shost->transportt->host_attrs.class
+	    != &fc_host_class.class)
+		return 0;
+	return 1;
+}
 
 
 struct scsi_transport_template *
@@ -745,16 +767,16 @@ fc_attach_transport(struct fc_function_template *ft)
 
 	memset(i, 0, sizeof(struct fc_internal));
 
-	i->t.target_attrs = &i->starget_attrs[0];
-	i->t.target_class = &fc_transport_class;
-	i->t.target_setup = &fc_setup_starget_transport_attrs;
-	i->t.target_destroy = &fc_destroy_starget;
+	i->t.target_attrs.attrs = &i->starget_attrs[0];
+	i->t.target_attrs.class = &fc_transport_class.class;
+	i->t.target_attrs.match = fc_target_match;
+	attribute_container_register(&i->t.target_attrs);
 	i->t.target_size = sizeof(struct fc_starget_attrs);
 
-	i->t.host_attrs = &i->host_attrs[0];
-	i->t.host_class = &fc_host_class;
-	i->t.host_setup = &fc_setup_host_transport_attrs;
-	i->t.host_destroy = &fc_destroy_host;
+	i->t.host_attrs.attrs = &i->host_attrs[0];
+	i->t.host_attrs.class = &fc_host_class.class;
+	i->t.host_attrs.match = fc_host_match;
+	attribute_container_register(&i->t.host_attrs);
 	i->t.host_size = sizeof(struct fc_host_attrs);
 
 	if (ft->get_fc_host_stats)

drivers/scsi/scsi_transport_iscsi.c

@@ -40,28 +40,17 @@ struct iscsi_internal {
 
 #define to_iscsi_internal(tmpl) container_of(tmpl, struct iscsi_internal, t)
 
-static void iscsi_transport_class_release(struct class_device *class_dev)
-{
-	struct scsi_target *starget = transport_class_to_starget(class_dev);
-	put_device(&starget->dev);
-}
-
-struct class iscsi_transport_class = {
-	.name = "iscsi_transport_class",
-	.release = iscsi_transport_class_release,
-};
-
-static void iscsi_host_class_release(struct class_device *class_dev)
-{
-	struct Scsi_Host *shost = transport_class_to_shost(class_dev);
-	put_device(&shost->shost_gendev);
-}
-
-struct class iscsi_host_class = {
-	.name = "iscsi_host",
-	.release = iscsi_host_class_release,
-};
-
+static DECLARE_TRANSPORT_CLASS(iscsi_transport_class,
+			       "iscsi_transport",
+			       NULL,
+			       NULL,
+			       NULL);
+
+static DECLARE_TRANSPORT_CLASS(iscsi_host_class,
+			       "iscsi_host",
+			       NULL,
+			       NULL,
+			       NULL);
 /*
  * iSCSI target and session attrs
  */
@@ -265,6 +254,36 @@ iscsi_host_rd_str_attr(initiator_alias);
 		count++;						\
 	}
 
+static int iscsi_host_match(struct attribute_container *cont,
+			  struct device *dev)
+{
+	struct Scsi_Host *shost;
+
+	if (!scsi_is_host_device(dev))
+		return 0;
+
+	shost = dev_to_shost(dev);
+	if (!shost->transportt  || shost->transportt->host_attrs.class
+	    != &iscsi_host_class.class)
+		return 0;
+	return 1;
+}
+
+static int iscsi_target_match(struct attribute_container *cont,
+			    struct device *dev)
+{
+	struct Scsi_Host *shost;
+
+	if (!scsi_is_target_device(dev))
+		return 0;
+
+	shost = dev_to_shost(dev->parent);
+	if (!shost->transportt  || shost->transportt->host_attrs.class
+	    != &iscsi_host_class.class)
+		return 0;
+	return 1;
+}
+
 struct scsi_transport_template *
 iscsi_attach_transport(struct iscsi_function_template *fnt)
 {
@@ -278,9 +297,10 @@ iscsi_attach_transport(struct iscsi_function_template *fnt)
 	memset(i, 0, sizeof(struct iscsi_internal));
 	i->fnt = fnt;
 
-	i->t.target_attrs = &i->session_attrs[0];
-	i->t.target_class = &iscsi_transport_class;
-	i->t.target_setup = NULL;
+	i->t.target_attrs.attrs = &i->session_attrs[0];
+	i->t.target_attrs.class = &iscsi_transport_class.class;
+	i->t.target_attrs.match = iscsi_target_match;
+	attribute_container_register(&i->t.target_attrs);
 	i->t.target_size = sizeof(struct iscsi_class_session);
 
 	SETUP_SESSION_RD_ATTR(tsih);
@@ -307,9 +327,10 @@ iscsi_attach_transport(struct iscsi_function_template *fnt)
 	BUG_ON(count > ISCSI_SESSION_ATTRS);
 	i->session_attrs[count] = NULL;
 
-	i->t.host_attrs = &i->host_attrs[0];
-	i->t.host_class = &iscsi_host_class;
-	i->t.host_setup = NULL;
+	i->t.host_attrs.attrs = &i->host_attrs[0];
+	i->t.host_attrs.class = &iscsi_host_class.class;
+	i->t.host_attrs.match = iscsi_host_match;
+	attribute_container_register(&i->t.host_attrs);
 	i->t.host_size = 0;
 
 	count = 0;
@@ -334,17 +355,17 @@ EXPORT_SYMBOL(iscsi_release_transport);
 
 static __init int iscsi_transport_init(void)
 {
-	int err = class_register(&iscsi_transport_class);
+	int err = transport_class_register(&iscsi_transport_class);
 
 	if (err)
 		return err;
-	return class_register(&iscsi_host_class);
+	return transport_class_register(&iscsi_host_class);
 }
 
 static void __exit iscsi_transport_exit(void)
 {
-	class_unregister(&iscsi_host_class);
-	class_unregister(&iscsi_transport_class);
+	transport_class_unregister(&iscsi_host_class);
+	transport_class_unregister(&iscsi_transport_class);
 }
 
 module_init(iscsi_transport_init);

drivers/scsi/scsi_transport_spi.c

@@ -2,6 +2,7 @@
  *  Parallel SCSI (SPI) transport specific attributes exported to sysfs.
  *
  *  Copyright (c) 2003 Silicon Graphics, Inc.  All rights reserved.
+ *  Copyright (c) 2004, 2005 James Bottomley <James.Bottomley@SteelEye.com>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -37,9 +38,6 @@
 
 #define SPI_PRINTK(x, l, f, a...)	dev_printk(l, &(x)->dev, f , ##a)
 
-static void transport_class_release(struct class_device *class_dev);
-static void host_class_release(struct class_device *class_dev);
-
 #define SPI_NUM_ATTRS 10	/* increase this if you add attributes */
 #define SPI_OTHER_ATTRS 1	/* Increase this if you add "always
 				 * on" attributes */
@@ -119,40 +117,39 @@ static inline enum spi_signal_type spi_signal_to_value(const char *name)
 	return SPI_SIGNAL_UNKNOWN;
 }
 
+static int spi_host_setup(struct device *dev)
+{
+	struct Scsi_Host *shost = dev_to_shost(dev);
 
-struct class spi_transport_class = {
-	.name = "spi_transport",
-	.release = transport_class_release,
-};
-
-struct class spi_host_class = {
-	.name = "spi_host",
-	.release = host_class_release,
-};
+	spi_signalling(shost) = SPI_SIGNAL_UNKNOWN;
 
-static __init int spi_transport_init(void)
-{
-	int error = class_register(&spi_host_class);
-	if (error)
-		return error;
-	return class_register(&spi_transport_class);
+	return 0;
 }
 
-static void __exit spi_transport_exit(void)
-{
-	class_unregister(&spi_transport_class);
-	class_unregister(&spi_host_class);
-}
+static DECLARE_TRANSPORT_CLASS(spi_host_class,
+			       "spi_host",
+			       spi_host_setup,
+			       NULL,
+			       NULL);
 
-static int spi_setup_host_attrs(struct Scsi_Host *shost)
+static int spi_host_match(struct attribute_container *cont,
+			  struct device *dev)
 {
-	spi_signalling(shost) = SPI_SIGNAL_UNKNOWN;
+	struct Scsi_Host *shost;
 
-	return 0;
+	if (!scsi_is_host_device(dev))
+		return 0;
+
+	shost = dev_to_shost(dev);
+	if (!shost->transportt  || shost->transportt->host_attrs.class
+	    != &spi_host_class.class)
+		return 0;
+	return 1;
 }
 
-static int spi_configure_device(struct scsi_device *sdev)
+static int spi_device_configure(struct device *dev)
 {
+	struct scsi_device *sdev = to_scsi_device(dev);
 	struct scsi_target *starget = sdev->sdev_target;
 
 	/* Populate the target capability fields with the values
@@ -168,8 +165,10 @@ static int spi_configure_device(struct scsi_device *sdev)
 	return 0;
 }
 
-static int spi_setup_transport_attrs(struct scsi_target *starget)
+static int spi_setup_transport_attrs(struct device *dev)
 {
+	struct scsi_target *starget = to_scsi_target(dev);
+
 	spi_period(starget) = -1;	/* illegal value */
 	spi_offset(starget) = 0;	/* async */
 	spi_width(starget) = 0;	/* narrow */
@@ -187,18 +186,6 @@ static int spi_setup_transport_attrs(struct scsi_target *starget)
 	return 0;
 }
 
-static void transport_class_release(struct class_device *class_dev)
-{
-	struct scsi_target *starget = transport_class_to_starget(class_dev);
-	put_device(&starget->dev);
-}
-
-static void host_class_release(struct class_device *class_dev)
-{
-	struct Scsi_Host *shost = transport_class_to_shost(class_dev);
-	put_device(&shost->shost_gendev);
-}
-
 #define spi_transport_show_function(field, format_string)		\
 									\
 static ssize_t								\
@@ -823,6 +810,48 @@ EXPORT_SYMBOL(spi_schedule_dv_device);
 	i->host_attrs[count] = &i->private_host_attrs[count];		\
 	count++
 
+static int spi_device_match(struct attribute_container *cont,
+			    struct device *dev)
+{
+	struct scsi_device *sdev;
+	struct Scsi_Host *shost;
+
+	if (!scsi_is_sdev_device(dev))
+		return 0;
+
+	sdev = to_scsi_device(dev);
+	shost = sdev->host;
+	if (!shost->transportt  || shost->transportt->host_attrs.class
+	    != &spi_host_class.class)
+		return 0;
+	return 1;
+}
+
+static int spi_target_match(struct attribute_container *cont,
+			    struct device *dev)
+{
+	struct Scsi_Host *shost;
+
+	if (!scsi_is_target_device(dev))
+		return 0;
+
+	shost = dev_to_shost(dev->parent);
+	if (!shost->transportt  || shost->transportt->host_attrs.class
+	    != &spi_host_class.class)
+		return 0;
+	return 1;
+}
+
+static DECLARE_TRANSPORT_CLASS(spi_transport_class,
+			       "spi_transport",
+			       spi_setup_transport_attrs,
+			       NULL,
+			       NULL);
+
+static DECLARE_ANON_TRANSPORT_CLASS(spi_device_class,
+				    spi_device_match,
+				    spi_device_configure);
+
 struct scsi_transport_template *
 spi_attach_transport(struct spi_function_template *ft)
 {
@@ -835,14 +864,15 @@ spi_attach_transport(struct spi_function_template *ft)
 	memset(i, 0, sizeof(struct spi_internal));
 
 
-	i->t.target_attrs = &i->attrs[0];
-	i->t.target_class = &spi_transport_class;
-	i->t.target_setup = &spi_setup_transport_attrs;
-	i->t.device_configure = &spi_configure_device;
+	i->t.target_attrs.class = &spi_transport_class.class;
+	i->t.target_attrs.attrs = &i->attrs[0];
+	i->t.target_attrs.match = spi_target_match;
+	attribute_container_register(&i->t.target_attrs);
 	i->t.target_size = sizeof(struct spi_transport_attrs);
-	i->t.host_attrs = &i->host_attrs[0];
-	i->t.host_class = &spi_host_class;
-	i->t.host_setup = &spi_setup_host_attrs;
+	i->t.host_attrs.class = &spi_host_class.class;
+	i->t.host_attrs.attrs = &i->host_attrs[0];
+	i->t.host_attrs.match = spi_host_match;
+	attribute_container_register(&i->t.host_attrs);
 	i->t.host_size = sizeof(struct spi_host_attrs);
 	i->f = ft;
 
@@ -884,6 +914,21 @@ void spi_release_transport(struct scsi_transport_template *t)
 }
 EXPORT_SYMBOL(spi_release_transport);
 
+static __init int spi_transport_init(void)
+{
+	int error = transport_class_register(&spi_transport_class);
+	if (error)
+		return error;
+	error = anon_transport_class_register(&spi_device_class);
+	return transport_class_register(&spi_host_class);
+}
+
+static void __exit spi_transport_exit(void)
+{
+	transport_class_unregister(&spi_transport_class);
+	anon_transport_class_unregister(&spi_device_class);
+	transport_class_unregister(&spi_host_class);
+}
 
 MODULE_AUTHOR("Martin Hicks");
 MODULE_DESCRIPTION("SPI Transport Attributes");

drivers/scsi/sg.c

@@ -7,7 +7,7 @@
  * Original driver (sg.c):
  *        Copyright (C) 1992 Lawrence Foard
  * Version 2 and 3 extensions to driver:
- *        Copyright (C) 1998 - 2004 Douglas Gilbert
+ *        Copyright (C) 1998 - 2005 Douglas Gilbert
  *
  *  Modified  19-JAN-1998  Richard Gooch <rgooch@atnf.csiro.au>  Devfs support
  *
@@ -18,8 +18,8 @@
  *
  */
 
-static int sg_version_num = 30531;	/* 2 digits for each component */
-#define SG_VERSION_STR "3.5.31"
+static int sg_version_num = 30532;	/* 2 digits for each component */
+#define SG_VERSION_STR "3.5.32"
 
 /*
  *  D. P. Gilbert (dgilbert@interlog.com, dougg@triode.net.au), notes:
@@ -60,7 +60,7 @@ static int sg_version_num = 30531;	/* 2 digits for each component */
 
 #ifdef CONFIG_SCSI_PROC_FS
 #include <linux/proc_fs.h>
-static char *sg_version_date = "20040516";
+static char *sg_version_date = "20050117";
 
 static int sg_proc_init(void);
 static void sg_proc_cleanup(void);
@@ -1282,6 +1282,8 @@ sg_cmd_done(Scsi_Cmnd * SCpnt)
 	srp->header.duration =
 	    jiffies_to_msecs(jiffies - srp->header.duration);
 	if (0 != SRpnt->sr_result) {
+		struct scsi_sense_hdr sshdr;
+
 		memcpy(srp->sense_b, SRpnt->sr_sense_buffer,
 		       sizeof (srp->sense_b));
 		srp->header.status = 0xff & SRpnt->sr_result;
@@ -1296,11 +1298,12 @@ sg_cmd_done(Scsi_Cmnd * SCpnt)
 
 		/* Following if statement is a patch supplied by Eric Youngdale */
 		if (driver_byte(SRpnt->sr_result) != 0
-		    && (SRpnt->sr_sense_buffer[0] & 0x7f) == 0x70
-		    && (SRpnt->sr_sense_buffer[2] & 0xf) == UNIT_ATTENTION
+		    && scsi_command_normalize_sense(SCpnt, &sshdr)
+		    && !scsi_sense_is_deferred(&sshdr)
+		    && sshdr.sense_key == UNIT_ATTENTION
 		    && sdp->device->removable) {
-			/* Detected disc change. Set the bit - this may be used if */
-			/* there are filesystems using this device. */
+			/* Detected possible disc change. Set the bit - this */
+			/* may be used if there are filesystems using this device */
 			sdp->device->changed = 1;
 		}
 	}
@@ -1573,8 +1576,8 @@ sg_remove(struct class_device *cl_dev)
  * of sysfs parameters (which module_param doesn't yet support).
  * Sysfs parameters defined explicitly below.
  */
-module_param_named(def_reserved_size, def_reserved_size, int, 0);
-module_param_named(allow_dio, sg_allow_dio, int, 0);
+module_param_named(def_reserved_size, def_reserved_size, int, S_IRUGO);
+module_param_named(allow_dio, sg_allow_dio, int, S_IRUGO | S_IWUSR);
 
 MODULE_AUTHOR("Douglas Gilbert");
 MODULE_DESCRIPTION("SCSI generic (sg) driver");
@@ -2606,9 +2609,14 @@ sg_page_free(char *buff, int size)
 	free_pages((unsigned long) buff, order);
 }
 
+#ifndef MAINTENANCE_IN_CMD
+#define MAINTENANCE_IN_CMD 0xa3
+#endif
+
 static unsigned char allow_ops[] = { TEST_UNIT_READY, REQUEST_SENSE,
 	INQUIRY, READ_CAPACITY, READ_BUFFER, READ_6, READ_10, READ_12,
-	MODE_SENSE, MODE_SENSE_10, LOG_SENSE
+	READ_16, MODE_SENSE, MODE_SENSE_10, LOG_SENSE, REPORT_LUNS,
+	SERVICE_ACTION_IN, RECEIVE_DIAGNOSTIC, READ_LONG, MAINTENANCE_IN_CMD
 };
 
 static int

drivers/scsi/sr.c

@@ -152,9 +152,11 @@ static inline struct scsi_cd *scsi_cd_get(struct gendisk *disk)
 
 static inline void scsi_cd_put(struct scsi_cd *cd)
 {
+	struct scsi_device *sdev = cd->device;
+
 	down(&sr_ref_sem);
 	kref_put(&cd->kref, sr_kref_release);
-	scsi_device_put(cd->device);
+	scsi_device_put(sdev);
 	up(&sr_ref_sem);
 }
 

include/linux/attribute_container.h

+/*
+ * class_container.h - a generic container for all classes
+ *
+ * Copyright (c) 2005 - James Bottomley <James.Bottomley@steeleye.com>
+ *
+ * This file is licensed under GPLv2
+ */
+
+#ifndef _ATTRIBUTE_CONTAINER_H_
+#define _ATTRIBUTE_CONTAINER_H_
+
+#include <linux/device.h>
+#include <linux/list.h>
+
+struct attribute_container {
+	struct list_head	node;
+	struct list_head	containers;
+	struct class		*class;
+	struct class_device_attribute **attrs;
+	int (*match)(struct attribute_container *, struct device *);
+#define	ATTRIBUTE_CONTAINER_NO_CLASSDEVS	0x01
+	unsigned long		flags;
+};
+
+static inline int
+attribute_container_no_classdevs(struct attribute_container *atc)
+{
+	return atc->flags & ATTRIBUTE_CONTAINER_NO_CLASSDEVS;
+}
+
+static inline void
+attribute_container_set_no_classdevs(struct attribute_container *atc)
+{
+	atc->flags |= ATTRIBUTE_CONTAINER_NO_CLASSDEVS;
+}
+
+int attribute_container_register(struct attribute_container *cont);
+int attribute_container_unregister(struct attribute_container *cont);
+void attribute_container_create_device(struct device *dev,
+				       int (*fn)(struct attribute_container *,
+						 struct device *,
+						 struct class_device *));
+void attribute_container_add_device(struct device *dev,
+				    int (*fn)(struct attribute_container *,
+					      struct device *,
+					      struct class_device *));
+void attribute_container_remove_device(struct device *dev,
+				       void (*fn)(struct attribute_container *,
+						  struct device *,
+						  struct class_device *));
+void attribute_container_device_trigger(struct device *dev, 
+					int (*fn)(struct attribute_container *,
+						  struct device *,
+						  struct class_device *));
+void attribute_container_trigger(struct device *dev, 
+				 int (*fn)(struct attribute_container *,
+					   struct device *));
+
+struct class_device_attribute **attribute_container_classdev_to_attrs(const struct class_device *classdev);
+
+#endif

include/linux/transport_class.h

+/*
+ * transport_class.h - a generic container for all transport classes
+ *
+ * Copyright (c) 2005 - James Bottomley <James.Bottomley@steeleye.com>
+ *
+ * This file is licensed under GPLv2
+ */
+
+#ifndef _TRANSPORT_CLASS_H_
+#define _TRANSPORT_CLASS_H_
+
+#include <linux/device.h>
+#include <linux/attribute_container.h>
+
+struct transport_class {
+	struct class class;
+	int (*setup)(struct device *);
+	int (*configure)(struct device *);
+	int (*remove)(struct device *);
+};
+
+#define DECLARE_TRANSPORT_CLASS(cls, nm, su, rm, cfg)			\
+struct transport_class cls = {						\
+	.class = {							\
+		.name = nm,						\
+	},								\
+	.setup = su,							\
+	.remove = rm,							\
+	.configure = cfg,						\
+}
+
+
+struct anon_transport_class {
+	struct transport_class tclass;
+	struct attribute_container container;
+};
+
+#define DECLARE_ANON_TRANSPORT_CLASS(cls, mtch, cfg)		\
+struct anon_transport_class cls = {				\
+	.tclass = {						\
+		.configure = cfg,				\
+	},							\
+	. container = {						\
+		.match = mtch,					\
+	},							\
+}
+
+#define class_to_transport_class(x) \
+	container_of(x, struct transport_class, class)
+
+void transport_remove_device(struct device *);
+void transport_add_device(struct device *);
+void transport_setup_device(struct device *);
+void transport_configure_device(struct device *);
+void transport_destroy_device(struct device *);
+
+static inline void
+transport_register_device(struct device *dev)
+{
+	transport_setup_device(dev);
+	transport_add_device(dev);
+}
+
+static inline void
+transport_unregister_device(struct device *dev)
+{
+	transport_remove_device(dev);
+	transport_destroy_device(dev);
+}
+
+int transport_class_register(struct transport_class *);
+int anon_transport_class_register(struct anon_transport_class *);
+void transport_class_unregister(struct transport_class *);
+void anon_transport_class_unregister(struct anon_transport_class *);
+
+
+#endif

include/scsi/scsi_device.h

@@ -123,8 +123,6 @@ struct scsi_device {
 	struct device		sdev_gendev;
 	struct class_device	sdev_classdev;
 
-	struct class_device	transport_classdev;
-
 	enum scsi_device_state sdev_state;
 	unsigned long		sdev_data[0];
 } __attribute__((aligned(sizeof(unsigned long))));
@@ -133,7 +131,7 @@ struct scsi_device {
 #define	class_to_sdev(d)	\
 	container_of(d, struct scsi_device, sdev_classdev)
 #define transport_class_to_sdev(class_dev) \
-	container_of(class_dev, struct scsi_device, transport_classdev)
+	to_scsi_device(class_dev->dev)
 
 /*
  * scsi_target: representation of a scsi target, for now, this is only
@@ -146,7 +144,6 @@ struct scsi_target {
 	unsigned int		channel;
 	unsigned int		id; /* target id ... replace
 				     * scsi_device.id eventually */
-	struct class_device	transport_classdev;
 	unsigned long		create:1; /* signal that it needs to be added */
 	unsigned long		starget_data[0];
 } __attribute__((aligned(sizeof(unsigned long))));
@@ -157,7 +154,7 @@ static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
 	return to_scsi_target(sdev->sdev_gendev.parent);
 }
 #define transport_class_to_starget(class_dev) \
-	container_of(class_dev, struct scsi_target, transport_classdev)
+	to_scsi_target(class_dev->dev)
 
 extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
 		uint, uint, uint, void *hostdata);
@@ -226,6 +223,8 @@ extern void scsi_device_resume(struct scsi_device *sdev);
 extern void scsi_target_quiesce(struct scsi_target *);
 extern void scsi_target_resume(struct scsi_target *);
 extern const char *scsi_device_state_name(enum scsi_device_state);
+extern int scsi_is_sdev_device(const struct device *);
+extern int scsi_is_target_device(const struct device *);
 static inline int scsi_device_online(struct scsi_device *sdev)
 {
 	return sdev->sdev_state != SDEV_OFFLINE;

include/scsi/scsi_eh.h

@@ -44,6 +44,12 @@ static inline int scsi_sense_is_deferred(struct scsi_sense_hdr *sshdr)
 {
 	return ((sshdr->response_code >= 0x70) && (sshdr->response_code & 1));
 }
+
+extern const u8 * scsi_sense_desc_find(const u8 * sense_buffer, int sb_len,
+				       int desc_type);
+
+extern int scsi_get_sense_info_fld(const u8 * sense_buffer, int sb_len,
+				   u64 * info_out);
  
 /*
  * Reset request from external source

include/scsi/scsi_host.h

@@ -71,7 +71,18 @@ struct scsi_host_template {
 	 * Status: OPTIONAL
 	 */
 	int (* ioctl)(struct scsi_device *dev, int cmd, void __user *arg);
-	
+
+
+#ifdef CONFIG_COMPAT
+	/* 
+	 * Compat handler. Handle 32bit ABI.
+	 * When unknown ioctl is passed return -ENOIOCTLCMD.
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* compat_ioctl)(struct scsi_device *dev, int cmd, void __user *arg);
+#endif
+
 	/*
 	 * The queuecommand function is used to queue up a scsi
 	 * command block to the LLDD.  When the driver finished
@@ -528,7 +539,6 @@ struct Scsi_Host {
 	 * separately
 	 */
 	void *shost_data;
-	struct class_device transport_classdev;
 
 	/*
 	 * We should ensure that this is aligned, both for better performance
@@ -542,8 +552,6 @@ struct Scsi_Host {
 	container_of(d, struct Scsi_Host, shost_gendev)
 #define		class_to_shost(d)	\
 	container_of(d, struct Scsi_Host, shost_classdev)
-#define		transport_class_to_shost(class_dev) \
-	container_of(class_dev, struct Scsi_Host, transport_classdev)
 
 
 extern struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *, int);
@@ -578,6 +586,7 @@ static inline struct device *scsi_get_device(struct Scsi_Host *shost)
 extern void scsi_unblock_requests(struct Scsi_Host *);
 extern void scsi_block_requests(struct Scsi_Host *);
 
+struct class_container;
 /*
  * These two functions are used to allocate and free a pseudo device
  * which will connect to the host adapter itself rather than any
@@ -587,6 +596,8 @@ extern void scsi_block_requests(struct Scsi_Host *);
  */
 extern void scsi_free_host_dev(struct scsi_device *);
 extern struct scsi_device *scsi_get_host_dev(struct Scsi_Host *);
+int scsi_is_host_device(const struct device *);
+
 
 /* legacy interfaces */
 extern struct Scsi_Host *scsi_register(struct scsi_host_template *, int);

include/scsi/scsi_transport.h

@@ -20,31 +20,16 @@
 #ifndef SCSI_TRANSPORT_H
 #define SCSI_TRANSPORT_H
 
-struct scsi_transport_template {
-	/* The NULL terminated list of transport attributes
-	 * that should be exported.
-	 */
-	struct class_device_attribute **device_attrs;
-	struct class_device_attribute **target_attrs;
-	struct class_device_attribute **host_attrs;
-
+#include <linux/transport_class.h>
 
-	/* The transport class that the device is in */
-	struct class *device_class;
-	struct class *target_class;
-	struct class *host_class;
+struct scsi_transport_template {
+	/* The statistics attached to the host class only */
 	struct attribute_group *host_statistics;
 
-	/* Constructor functions */
-	int (*device_setup)(struct scsi_device *);
-	int (*device_configure)(struct scsi_device *);
-	int (*target_setup)(struct scsi_target *);
-	int (*host_setup)(struct Scsi_Host *);
-
-	/* Destructor functions */
-	void (*device_destroy)(struct scsi_device *);
-	void (*target_destroy)(struct scsi_target *);
-	void (*host_destroy)(struct Scsi_Host *);
+	/* the attribute containers */
+	struct attribute_container host_attrs;
+	struct attribute_container target_attrs;
+	struct attribute_container device_attrs;
 
 	/* The size of the specific transport attribute structure (a
 	 * space of this size will be left at the end of the
@@ -54,4 +39,8 @@ struct scsi_transport_template {
 	int	host_size;
 };
 
+#define transport_class_to_shost(tc) \
+	dev_to_shost((tc)->dev)
+
+
 #endif /* SCSI_TRANSPORT_H */

include/scsi/scsi_transport_spi.h

@@ -21,6 +21,7 @@
 #define SCSI_TRANSPORT_SPI_H
 
 #include <linux/config.h>
+#include <linux/transport_class.h>
 
 struct scsi_transport_template;