Commit 8434fbef authored by Tony Lindgren's avatar Tony Lindgren

ARM: dts: omap4-droid4: Add CPCAP PMIC OTG PHY configuration

Add CPCAP PMIC OTG PHY configuration.

Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Reviewed-by: default avatarSebastian Reichel <sre@kernel.org>
Tested-by: default avatarSebastian Reichel <sre@kernel.org>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 8a1a6259
......@@ -65,6 +65,29 @@ power_button: button {
interrupts = <23 IRQ_TYPE_NONE>;
};
cpcap_usb2_phy: phy {
compatible = "motorola,mapphone-cpcap-usb-phy";
pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
pinctrl-1 = <&usb_ulpi_pins>;
pinctrl-2 = <&usb_utmi_pins>;
pinctrl-3 = <&uart3_pins>;
pinctrl-names = "default", "ulpi", "utmi", "uart";
#phy-cells = <0>;
interrupts-extended = <
&cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
&cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
&cpcap 48 1
>;
interrupt-names =
"id_ground", "id_float", "se0conn", "vbusvld",
"sessvld", "sessend", "se1", "dm", "dp";
mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
&gpio1 0 GPIO_ACTIVE_HIGH>;
io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
io-channel-names = "vbus", "id";
vusb-supply = <&vusb>;
};
led_red: led-red {
compatible = "motorola,cpcap-led-red";
vdd-supply = <&sw5>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment