Commit 8453c5ca authored by Tony Lindgren's avatar Tony Lindgren

ARM: OMAP2+: Add more functions to pwm pdata for ir-rx51

Before we start removing omap3 legacy booting support, let's make n900
DT booting behave the same way for ir-rx51 as the legacy booting does.

For now, we need to pass pdata to the ir-rx51 driver. This means that
the n900 tree can move to using DT based booting without having to carry
all the legacy platform data with it when it gets dropped from the mainline
tree.

Note that the ir-rx51 driver is currently disabled because of the
dependency to !ARCH_MULTIPLATFORM. This will get sorted out later
with the help of drivers/pwm/pwm-omap-dmtimer.c. But first we need
to add chained IRQ support to dmtimer code to avoid introducing new
custom frameworks.

So let's just pass the necessary dmtimer functions to ir-rx51 so we
can get it working in the following patch.

Cc: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: default avatarIvaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent f55532a0
......@@ -30,6 +30,8 @@
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include <plat/dmtimer.h>
#include <asm/system_info.h>
#include "common.h"
......@@ -47,9 +49,8 @@
#include <video/omap-panel-data.h>
#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
#include <linux/platform_data/pwm_omap_dmtimer.h>
#include <linux/platform_data/media/ir-rx51.h>
#endif
#include "mux.h"
#include "omap-pm.h"
......@@ -1212,10 +1213,40 @@ static void __init rx51_init_tsc2005(void)
gpio_to_irq(RX51_TSC2005_IRQ_GPIO);
}
#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
static struct pwm_omap_dmtimer_pdata __maybe_unused pwm_dmtimer_pdata = {
.request_by_node = omap_dm_timer_request_by_node,
.request_specific = omap_dm_timer_request_specific,
.request = omap_dm_timer_request,
.set_source = omap_dm_timer_set_source,
.get_irq = omap_dm_timer_get_irq,
.set_int_enable = omap_dm_timer_set_int_enable,
.set_int_disable = omap_dm_timer_set_int_disable,
.free = omap_dm_timer_free,
.enable = omap_dm_timer_enable,
.disable = omap_dm_timer_disable,
.get_fclk = omap_dm_timer_get_fclk,
.start = omap_dm_timer_start,
.stop = omap_dm_timer_stop,
.set_load = omap_dm_timer_set_load,
.set_match = omap_dm_timer_set_match,
.set_pwm = omap_dm_timer_set_pwm,
.set_prescaler = omap_dm_timer_set_prescaler,
.read_counter = omap_dm_timer_read_counter,
.write_counter = omap_dm_timer_write_counter,
.read_status = omap_dm_timer_read_status,
.write_status = omap_dm_timer_write_status,
};
#endif
#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
static struct lirc_rx51_platform_data rx51_lirc_data = {
.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
.pwm_timer = 9, /* Use GPT 9 for CIR */
#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
.dmtimer = &pwm_dmtimer_pdata,
#endif
};
static struct platform_device rx51_lirc_device = {
......
......@@ -24,6 +24,7 @@
#include <linux/platform_data/iommu-omap.h>
#include <linux/platform_data/wkup_m3.h>
#include <linux/platform_data/pwm_omap_dmtimer.h>
#include <linux/platform_data/media/ir-rx51.h>
#include <plat/dmtimer.h>
#include "common.h"
......@@ -31,6 +32,7 @@
#include "dss-common.h"
#include "control.h"
#include "omap_device.h"
#include "omap-pm.h"
#include "omap-secure.h"
#include "soc.h"
#include "hsmmc.h"
......@@ -268,6 +270,8 @@ static struct platform_device omap3_rom_rng_device = {
},
};
static struct platform_device rx51_lirc_device;
static void __init nokia_n900_legacy_init(void)
{
hsmmc2_internal_input_clk();
......@@ -286,6 +290,8 @@ static void __init nokia_n900_legacy_init(void)
platform_device_register(&omap3_rom_rng_device);
}
platform_device_register(&rx51_lirc_device);
}
static void __init omap3_tao3530_legacy_init(void)
......@@ -453,8 +459,14 @@ void omap_auxdata_legacy_init(struct device *dev)
/* Dual mode timer PWM callbacks platdata */
#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
static struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
.request_by_node = omap_dm_timer_request_by_node,
.request_specific = omap_dm_timer_request_specific,
.request = omap_dm_timer_request,
.set_source = omap_dm_timer_set_source,
.get_irq = omap_dm_timer_get_irq,
.set_int_enable = omap_dm_timer_set_int_enable,
.set_int_disable = omap_dm_timer_set_int_disable,
.free = omap_dm_timer_free,
.enable = omap_dm_timer_enable,
.disable = omap_dm_timer_disable,
......@@ -465,10 +477,29 @@ struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
.set_match = omap_dm_timer_set_match,
.set_pwm = omap_dm_timer_set_pwm,
.set_prescaler = omap_dm_timer_set_prescaler,
.read_counter = omap_dm_timer_read_counter,
.write_counter = omap_dm_timer_write_counter,
.read_status = omap_dm_timer_read_status,
.write_status = omap_dm_timer_write_status,
};
#endif
static struct lirc_rx51_platform_data __maybe_unused rx51_lirc_data = {
.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
.pwm_timer = 9, /* Use GPT 9 for CIR */
#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
.dmtimer = &pwm_dmtimer_pdata,
#endif
};
static struct platform_device __maybe_unused rx51_lirc_device = {
.name = "lirc_rx51",
.id = -1,
.dev = {
.platform_data = &rx51_lirc_data,
},
};
/*
* Few boards still need auxdata populated before we populate
* the dev entries in of_platform_populate().
......
......@@ -5,6 +5,7 @@ struct lirc_rx51_platform_data {
int pwm_timer;
int(*set_max_mpu_wakeup_lat)(struct device *dev, long t);
struct pwm_omap_dmtimer_pdata *dmtimer;
};
#endif
......@@ -35,6 +35,16 @@
#ifndef __PWM_OMAP_DMTIMER_PDATA_H
#define __PWM_OMAP_DMTIMER_PDATA_H
/* clock sources */
#define PWM_OMAP_DMTIMER_SRC_SYS_CLK 0x00
#define PWM_OMAP_DMTIMER_SRC_32_KHZ 0x01
#define PWM_OMAP_DMTIMER_SRC_EXT_CLK 0x02
/* timer interrupt enable bits */
#define PWM_OMAP_DMTIMER_INT_CAPTURE (1 << 2)
#define PWM_OMAP_DMTIMER_INT_OVERFLOW (1 << 1)
#define PWM_OMAP_DMTIMER_INT_MATCH (1 << 0)
/* trigger types */
#define PWM_OMAP_DMTIMER_TRIGGER_NONE 0x00
#define PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW 0x01
......@@ -45,15 +55,23 @@ typedef struct omap_dm_timer pwm_omap_dmtimer;
struct pwm_omap_dmtimer_pdata {
pwm_omap_dmtimer *(*request_by_node)(struct device_node *np);
pwm_omap_dmtimer *(*request_specific)(int timer_id);
pwm_omap_dmtimer *(*request)(void);
int (*free)(pwm_omap_dmtimer *timer);
void (*enable)(pwm_omap_dmtimer *timer);
void (*disable)(pwm_omap_dmtimer *timer);
int (*get_irq)(pwm_omap_dmtimer *timer);
int (*set_int_enable)(pwm_omap_dmtimer *timer, unsigned int value);
int (*set_int_disable)(pwm_omap_dmtimer *timer, u32 mask);
struct clk *(*get_fclk)(pwm_omap_dmtimer *timer);
int (*start)(pwm_omap_dmtimer *timer);
int (*stop)(pwm_omap_dmtimer *timer);
int (*set_source)(pwm_omap_dmtimer *timer, int source);
int (*set_load)(pwm_omap_dmtimer *timer, int autoreload,
unsigned int value);
......@@ -63,7 +81,10 @@ struct pwm_omap_dmtimer_pdata {
int toggle, int trigger);
int (*set_prescaler)(pwm_omap_dmtimer *timer, int prescaler);
unsigned int (*read_counter)(pwm_omap_dmtimer *timer);
int (*write_counter)(pwm_omap_dmtimer *timer, unsigned int value);
unsigned int (*read_status)(pwm_omap_dmtimer *timer);
int (*write_status)(pwm_omap_dmtimer *timer, unsigned int value);
};
#endif /* __PWM_OMAP_DMTIMER_PDATA_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment