libertas: rate adaptation configuration via iwconfig.

Implemented rate adaptation support via 'iwconfig rate' API.  It is now
possible to specify a bit-rate value and append 'auto'.  That will configure
rate adaptation to use all bit-rates equal or lower than than selected value.

Made lbs_cmd_802_11_rate_adapt_rateset a direct command.
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/libertas/assoc.c

@@ -1250,7 +1250,7 @@ static int get_common_rates(struct lbs_private *priv,
 	lbs_deb_hex(LBS_DEB_JOIN, "common rates", tmp, tmp_size);
 	lbs_deb_join("TX data rate 0x%02x\n", priv->cur_rate);
 
-	if (!priv->auto_rate) {
+	if (!priv->enablehwauto) {
 		for (i = 0; i < tmp_size; i++) {
 			if (tmp[i] == priv->cur_rate)
 				goto done;

drivers/net/wireless/libertas/cmd.c

@@ -676,26 +676,60 @@ static int lbs_cmd_802_11_monitor_mode(struct cmd_ds_command *cmd,
 	return 0;
 }
 
-static int lbs_cmd_802_11_rate_adapt_rateset(struct lbs_private *priv,
-					      struct cmd_ds_command *cmd,
-					      u16 cmd_action)
+static __le16 lbs_rate_to_fw_bitmap(int rate, int lower_rates_ok)
 {
-	struct cmd_ds_802_11_rate_adapt_rateset
-	*rateadapt = &cmd->params.rateset;
+/*		Bit  	Rate
+*		15:13 Reserved
+*		12    54 Mbps
+*		11    48 Mbps
+*		10    36 Mbps
+*		9     24 Mbps
+*		8     18 Mbps
+*		7     12 Mbps
+*		6     9 Mbps
+*		5     6 Mbps
+*		4     Reserved
+*		3     11 Mbps
+*		2     5.5 Mbps
+*		1     2 Mbps
+*		0     1 Mbps
+**/
+
+	uint16_t ratemask;
+	int i = lbs_data_rate_to_fw_index(rate);
+	if (lower_rates_ok)
+		ratemask = (0x1fef >> (12 - i));
+	else
+		ratemask = (1 << i);
+	return cpu_to_le16(ratemask);
+}
+
+int lbs_cmd_802_11_rate_adapt_rateset(struct lbs_private *priv,
+				      uint16_t cmd_action)
+{
+	struct cmd_ds_802_11_rate_adapt_rateset cmd;
+	int ret;
 
 	lbs_deb_enter(LBS_DEB_CMD);
-	cmd->size =
-	    cpu_to_le16(sizeof(struct cmd_ds_802_11_rate_adapt_rateset)
-			     + S_DS_GEN);
-	cmd->command = cpu_to_le16(CMD_802_11_RATE_ADAPT_RATESET);
 
-	rateadapt->action = cpu_to_le16(cmd_action);
-	rateadapt->enablehwauto = cpu_to_le16(priv->enablehwauto);
-	rateadapt->bitmap = cpu_to_le16(priv->ratebitmap);
+	if (!priv->cur_rate && !priv->enablehwauto)
+		return -EINVAL;
 
-	lbs_deb_leave(LBS_DEB_CMD);
-	return 0;
+	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+
+	cmd.action = cpu_to_le16(cmd_action);
+	cmd.enablehwauto = cpu_to_le16(priv->enablehwauto);
+	cmd.bitmap = lbs_rate_to_fw_bitmap(priv->cur_rate, priv->enablehwauto);
+	ret = lbs_cmd_with_response(priv, CMD_802_11_RATE_ADAPT_RATESET, &cmd);
+	if (!ret && cmd_action == CMD_ACT_GET) {
+		priv->ratebitmap = le16_to_cpu(cmd.bitmap);
+		priv->enablehwauto = le16_to_cpu(cmd.enablehwauto);
+	}
+
+	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
+	return ret;
 }
+EXPORT_SYMBOL_GPL(lbs_cmd_802_11_rate_adapt_rateset);
 
 /**
  *  @brief Set the data rate
@@ -1378,11 +1412,6 @@ int lbs_prepare_and_send_command(struct lbs_private *priv,
 						 cmd_action, pdata_buf);
 		break;
 
-	case CMD_802_11_RATE_ADAPT_RATESET:
-		ret = lbs_cmd_802_11_rate_adapt_rateset(priv,
-							 cmdptr, cmd_action);
-		break;
-
 	case CMD_802_11_MONITOR_MODE:
 		ret = lbs_cmd_802_11_monitor_mode(cmdptr,
 				          cmd_action, pdata_buf);

drivers/net/wireless/libertas/cmd.h

@@ -48,6 +48,8 @@ int lbs_host_sleep_cfg(struct lbs_private *priv, uint32_t criteria);
 int lbs_suspend(struct lbs_private *priv);
 void lbs_resume(struct lbs_private *priv);
 
+int lbs_cmd_802_11_rate_adapt_rateset(struct lbs_private *priv,
+				      uint16_t cmd_action);
 int lbs_cmd_802_11_inactivity_timeout(struct lbs_private *priv,
 				      uint16_t cmd_action, uint16_t *timeout);
 int lbs_cmd_802_11_sleep_params(struct lbs_private *priv, uint16_t cmd_action,

drivers/net/wireless/libertas/cmdresp.c

@@ -203,22 +203,6 @@ static int lbs_ret_802_11_rf_tx_power(struct lbs_private *priv,
 	return 0;
 }
 
-static int lbs_ret_802_11_rate_adapt_rateset(struct lbs_private *priv,
-					      struct cmd_ds_command *resp)
-{
-	struct cmd_ds_802_11_rate_adapt_rateset *rates = &resp->params.rateset;
-
-	lbs_deb_enter(LBS_DEB_CMD);
-
-	if (rates->action == CMD_ACT_GET) {
-		priv->enablehwauto = le16_to_cpu(rates->enablehwauto);
-		priv->ratebitmap = le16_to_cpu(rates->bitmap);
-	}
-
-	lbs_deb_leave(LBS_DEB_CMD);
-	return 0;
-}
-
 static int lbs_ret_802_11_rssi(struct lbs_private *priv,
 				struct cmd_ds_command *resp)
 {
@@ -321,10 +305,6 @@ static inline int handle_cmd_response(struct lbs_private *priv,
 	case CMD_RET(CMD_802_11_BEACON_STOP):
 		break;
 
-	case CMD_RET(CMD_802_11_RATE_ADAPT_RATESET):
-		ret = lbs_ret_802_11_rate_adapt_rateset(priv, resp);
-		break;
-
 	case CMD_RET(CMD_802_11_RSSI):
 		ret = lbs_ret_802_11_rssi(priv, resp);
 		break;

drivers/net/wireless/libertas/dev.h

@@ -237,8 +237,8 @@ struct lbs_private {
 	/** 802.11 statistics */
 //	struct cmd_DS_802_11_GET_STAT wlan802_11Stat;
 
-	u16 enablehwauto;
-	u16 ratebitmap;
+	uint16_t enablehwauto;
+	uint16_t ratebitmap;
 
 	u32 fragthsd;
 	u32 rtsthsd;
@@ -296,7 +296,6 @@ struct lbs_private {
 
 	/** data rate stuff */
 	u8 cur_rate;
-	u8 auto_rate;
 
 	/** RF calibration data */
 

drivers/net/wireless/libertas/hostcmd.h

@@ -500,6 +500,7 @@ struct cmd_ds_802_11_data_rate {
 };
 
 struct cmd_ds_802_11_rate_adapt_rateset {
+	struct cmd_header hdr;
 	__le16 action;
 	__le16 enablehwauto;
 	__le16 bitmap;
@@ -703,7 +704,6 @@ struct cmd_ds_command {
 		struct cmd_ds_802_11_rf_tx_power txp;
 		struct cmd_ds_802_11_rf_antenna rant;
 		struct cmd_ds_802_11_monitor_mode monitor;
-		struct cmd_ds_802_11_rate_adapt_rateset rateset;
 		struct cmd_ds_802_11_ad_hoc_join adj;
 		struct cmd_ds_802_11_rssi rssi;
 		struct cmd_ds_802_11_rssi_rsp rssirsp;

drivers/net/wireless/libertas/main.c

@@ -1044,7 +1044,7 @@ static int lbs_init_adapter(struct lbs_private *priv)
 	priv->curbssparams.channel = DEFAULT_AD_HOC_CHANNEL;
 	priv->mac_control = CMD_ACT_MAC_RX_ON | CMD_ACT_MAC_TX_ON;
 	priv->radioon = RADIO_ON;
-	priv->auto_rate = 1;
+	priv->enablehwauto = 1;
 	priv->capability = WLAN_CAPABILITY_SHORT_PREAMBLE;
 	priv->psmode = LBS802_11POWERMODECAM;
 	priv->psstate = PS_STATE_FULL_POWER;

drivers/net/wireless/libertas/rx.c

@@ -237,7 +237,7 @@ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb)
 	/* Take the data rate from the rxpd structure
 	 * only if the rate is auto
 	 */
-	if (priv->auto_rate)
+	if (priv->enablehwauto)
 		priv->cur_rate = lbs_fw_index_to_data_rate(p_rx_pd->rx_rate);
 
 	lbs_compute_rssi(priv, p_rx_pd);
@@ -383,7 +383,7 @@ static int process_rxed_802_11_packet(struct lbs_private *priv,
 	/* Take the data rate from the rxpd structure
 	 * only if the rate is auto
 	 */
-	if (priv->auto_rate)
+	if (priv->enablehwauto)
 		priv->cur_rate = lbs_fw_index_to_data_rate(prxpd->rx_rate);
 
 	lbs_compute_rssi(priv, prxpd);

drivers/net/wireless/libertas/wext.c

@@ -1021,29 +1021,38 @@ static int lbs_set_rate(struct net_device *dev, struct iw_request_info *info,
 
 	lbs_deb_enter(LBS_DEB_WEXT);
 	lbs_deb_wext("vwrq->value %d\n", vwrq->value);
+	lbs_deb_wext("vwrq->fixed %d\n", vwrq->fixed);
+
+	if (vwrq->fixed && vwrq->value == -1)
+		goto out;
 
 	/* Auto rate? */
-	if (vwrq->value == -1) {
-		priv->auto_rate = 1;
+	priv->enablehwauto = !vwrq->fixed;
+
+	if (vwrq->value == -1)
 		priv->cur_rate = 0;
-	} else {
+	else {
 		if (vwrq->value % 100000)
 			goto out;
 
+		new_rate = vwrq->value / 500000;
+		priv->cur_rate = new_rate;
+		/* the rest is only needed for lbs_set_data_rate() */
 		memset(rates, 0, sizeof(rates));
 		copy_active_data_rates(priv, rates);
-		new_rate = vwrq->value / 500000;
 		if (!memchr(rates, new_rate, sizeof(rates))) {
 			lbs_pr_alert("fixed data rate 0x%X out of range\n",
 				new_rate);
 			goto out;
 		}
-
-		priv->cur_rate = new_rate;
-		priv->auto_rate = 0;
 	}
 
-	ret = lbs_set_data_rate(priv, new_rate);
+	/* Try the newer command first (Firmware Spec 5.1 and above) */
+	ret = lbs_cmd_802_11_rate_adapt_rateset(priv, CMD_ACT_SET);
+
+	/* Fallback to older version */
+	if (ret)
+		ret = lbs_set_data_rate(priv, new_rate);
 
 out:
 	lbs_deb_leave_args(LBS_DEB_WEXT, "ret %d", ret);
@@ -1060,7 +1069,7 @@ static int lbs_get_rate(struct net_device *dev, struct iw_request_info *info,
 	if (priv->connect_status == LBS_CONNECTED) {
 		vwrq->value = priv->cur_rate * 500000;
 
-		if (priv->auto_rate)
+		if (priv->enablehwauto)
 			vwrq->fixed = 0;
 		else
 			vwrq->fixed = 1;