Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM Device-tree updates from Olof Johansson:
 "Device-tree continues to see lots of updates. The majority of patches
  here are smaller changes for new hardware on existing platforms, and
  there are a few larger changes worth pointing out.

  Major new platforms:

   - Gemini has been ported to DT, so a handful of "new" platforms moved
     over from board files

   - Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288
     SoM and RDK

   - A bunch of embedded platforms, several Linksys platforms, Synology
     DS116,

   - Motorola Droid4 (really old OMAP-based phone) support is added.

  Some refactorings, i.e. Allwinner H3/H5 support is commonalized.

  And lots of smaller changes, cleanups, etc. See shortlog for more
  description

  We're adding ability to cross-include DT files between arm and arm64,
  by creating appropriate links in the dt-include directory, and using
  arm/ and arm64/ as include prefixes. This will avoid other local hacks
  such as per-file links between the two arch trees (this broke for
  external mirroring of DT contents). Now they can just provide their
  own appropriate dt-include hierarcy per platform"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (349 commits)
  ARM: dts: exynos: Use - instead of @ for DT OPP entries
  arm: spear6xx: add DT description of the ADC on SPEAr600
  arm: spear6xx: remove unneeded pinctrl properties in spear600-evb
  arm: spear6xx: switch spear600-evb to the new flash partition DT binding
  arm: spear6xx: fix spaces in spear600-evb.dts
  arm: spear6xx: use node labels in spear600-evb.dts
  arm: spear6xx: add labels to various nodes in spear600.dtsi
  ARM: dts: vexpress: fix few unit address format warnings
  ARM: dts: at91: sama5d3_xplained: not all ADC channels are available
  ARM: dts: at91: sama5d3_xplained: fix ADC vref
  ARM: dts: at91: add envelope detector mux to the Axentia TSE-850
  ARM: dts: armada-38x: label USB and SATA nodes
  ARM: dts: imx6q-utilite-pro: add hpd gpio
  ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
  ARM: dts: imx6qdl-sabresd: Set LDO regulator supply
  ARM: dts: imx: add Gateworks Ventana GW5903 support
  ARM: dts: i.MX25: add AIPS control registers
  ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators
  ARM: dts: imx7-colibri: remove 1.8V fixed regulator
  ARM: dts: imx7-colibri: allow to disable Ethernet rail
  ...

Documentation/devicetree/bindings/arm/atmel-at91.txt

@@ -217,7 +217,8 @@ memory, bridge implementations, processor and other functionality not controlled
 elsewhere.
 
 required properties:
-- compatible: Should be "atmel,<chip>-sfr", "syscon".
+- compatible: Should be "atmel,<chip>-sfr", "syscon" or
+	"atmel,<chip>-sfrbu", "syscon"
   <chip> can be "sama5d3", "sama5d4" or "sama5d2".
 - reg: Should contain registers location and length
 

Documentation/devicetree/bindings/arm/gemini.txt

+Cortina systems Gemini platforms
+
+The Gemini SoC is the project name for an ARMv4 FA525-based SoC originally
+produced by Storlink Semiconductor around 2005. The company was renamed
+later renamed Storm Semiconductor. The chip product name is Storlink SL3516.
+It was derived from earlier products from Storm named SL3316 (Centroid) and
+SL3512 (Bulverde).
+
+Storm Semiconductor was acquired by Cortina Systems in 2008 and the SoC was
+produced and used for NAS and similar usecases. In 2014 Cortina Systems was
+in turn acquired by Inphi, who seem to have discontinued this product family.
+
+Many of the IP blocks used in the SoC comes from Faraday Technology.
+
+Required properties (in root node):
+	compatible = "cortina,gemini";
+
+Required nodes:
+
+- soc: the SoC should be represented by a simple bus encompassing all the
+  onchip devices, this is referred to as the soc bus node.
+
+- syscon: the soc bus node must have a system controller node pointing to the
+  global control registers, with the compatible string
+  "cortina,gemini-syscon", "syscon";
+
+- timer: the soc bus node must have a timer node pointing to the SoC timer
+  block, with the compatible string "cortina,gemini-timer"
+  See: clocksource/cortina,gemini-timer.txt
+
+- interrupt-controller: the sob bus node must have an interrupt controller
+  node pointing to the SoC interrupt controller block, with the compatible
+  string "cortina,gemini-interrupt-controller"
+  See interrupt-controller/cortina,gemini-interrupt-controller.txt
+
+Example:
+
+/ {
+	model = "Foo Gemini Machine";
+	compatible = "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+		interrupt-parent = <&intcon>;
+
+		syscon: syscon@40000000 {
+			compatible = "cortina,gemini-syscon", "syscon";
+			reg = <0x40000000 0x1000>;
+		};
+
+		uart0: serial@42000000 {
+			compatible = "ns16550a";
+			reg = <0x42000000 0x100>;
+			clock-frequency = <48000000>;
+			interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+		};
+
+		timer@43000000 {
+			compatible = "cortina,gemini-timer";
+			reg = <0x43000000 0x1000>;
+			interrupt-parent = <&intcon>;
+			interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
+				     <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
+				     <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
+			syscon = <&syscon>;
+		};
+
+		intcon: interrupt-controller@48000000 {
+			compatible = "cortina,gemini-interrupt-controller";
+			reg = <0x48000000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};

Documentation/devicetree/bindings/arm/i2se.txt

+I2SE Device Tree Bindings
+-------------------------
+
+Duckbill Board
+Required root node properties:
+    - compatible = "i2se,duckbill", "fsl,imx28";
+
+Duckbill 2 Board
+Required root node properties:
+    - compatible = "i2se,duckbill-2", "fsl,imx28";
+
+Duckbill 2 485 Board
+Required root node properties:
+    - compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
+
+Duckbill 2 EnOcean Board
+Required root node properties:
+    - compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
+
+Duckbill 2 SPI Board
+Required root node properties:
+    - compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28";

Documentation/devicetree/bindings/arm/rockchip.txt

 Rockchip platforms device tree bindings
 ---------------------------------------
+- Asus Tinker board
+    Required root node properties:
+      - compatible = "asus,rk3288-tinker", "rockchip,rk3288";
 
 - Kylin RK3036 board:
     Required root node properties:
@@ -103,6 +106,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "mqmaker,miqi", "rockchip,rk3288";
 
+- Phytec phyCORE-RK3288: Rapid Development Kit
+    Required root node properties:
+     - compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288";
+
 - Rockchip PX3 Evaluation board:
     Required root node properties:
       - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";

Documentation/devicetree/bindings/arm/shmobile.txt

@@ -13,8 +13,12 @@ SoCs:
     compatible = "renesas,r8a73a4"
   - R-Mobile A1 (R8A77400)
     compatible = "renesas,r8a7740"
+  - RZ/G1H (R8A77420)
+    compatible = "renesas,r8a7742"
   - RZ/G1M (R8A77430)
     compatible = "renesas,r8a7743"
+  - RZ/G1N (R8A77440)
+    compatible = "renesas,r8a7744"
   - RZ/G1E (R8A77450)
     compatible = "renesas,r8a7745"
   - R-Car M1A (R8A77781)

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt

 NVIDIA Tegra Flow Controller
 
 Required properties:
-- compatible: Should be "nvidia,tegra<chip>-flowctrl"
+- compatible: Should contain one of the following:
+  - "nvidia,tegra20-flowctrl": for Tegra20
+  - "nvidia,tegra30-flowctrl": for Tegra30
+  - "nvidia,tegra114-flowctrl": for Tegra114
+  - "nvidia,tegra124-flowctrl": for Tegra124
+  - "nvidia,tegra132-flowctrl", "nvidia,tegra124-flowctrl": for Tegra132
+  - "nvidia,tegra210-flowctrl": for Tegra210
 - reg: Should contain one register range (address and length)
 
 Example:

Documentation/devicetree/bindings/clock/mvebu-core-clock.txt

@@ -31,6 +31,12 @@ The following is a list of provided IDs and clock names on Armada 39x:
  4 = dclk    (SDRAM Interface Clock)
  5 = refclk  (Reference Clock)
 
+The following is a list of provided IDs and clock names on 98dx3236:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = ddrclk   (DDR clock)
+ 3 = mpll    (MPLL Clock)
+
 The following is a list of provided IDs and clock names on Kirkwood and Dove:
  0 = tclk   (Internal Bus clock)
  1 = cpuclk (CPU0 clock)
@@ -49,6 +55,7 @@ Required properties:
 	"marvell,armada-380-core-clock" - For Armada 380/385 SoC core clocks
 	"marvell,armada-390-core-clock" - For Armada 39x SoC core clocks
 	"marvell,armada-xp-core-clock" - For Armada XP SoC core clocks
+	"marvell,mv98dx3236-core-clock" - For 98dx3236 family SoC core clocks
 	"marvell,dove-core-clock" - for Dove SoC core clocks
 	"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
 	"marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC

Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt

@@ -119,6 +119,16 @@ ID	Clock	Peripheral
 29	sata1lnk
 30	sata1	SATA Host 1
 
+The following is a list of provided IDs for 98dx3236:
+ID	Clock	Peripheral
+-----------------------------------
+3	ge1	Gigabit Ethernet 1
+4	ge0	Gigabit Ethernet 0
+5	pex0	PCIe Cntrl 0
+17	sdio	SDHCI Host
+18	usb0	USB Host 0
+22	xor0	XOR DMA 0
+
 The following is a list of provided IDs for Dove:
 ID	Clock	Peripheral
 -----------------------------------
@@ -169,6 +179,7 @@ Required properties:
 	"marvell,armada-380-gating-clock" - for Armada 380/385 SoC clock gating
 	"marvell,armada-390-gating-clock" - for Armada 39x SoC clock gating
 	"marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating
+	"marvell,mv98dx3236-gating-clock" - for 98dx3236 SoC clock gating
 	"marvell,dove-gating-clock" - for Dove SoC clock gating
 	"marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
 - reg : shall be the register address of the Clock Gating Control register

Documentation/devicetree/bindings/devfreq/exynos-bus.txt

@@ -202,23 +202,23 @@ Example2 :
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@50000000 {
+		opp-50000000 {
 			opp-hz = /bits/ 64 <50000000>;
 			opp-microvolt = <800000>;
 		};
-		opp@100000000 {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 			opp-microvolt = <800000>;
 		};
-		opp@134000000 {
+		opp-134000000 {
 			opp-hz = /bits/ 64 <134000000>;
 			opp-microvolt = <800000>;
 		};
-		opp@200000000 {
+		opp-200000000 {
 			opp-hz = /bits/ 64 <200000000>;
 			opp-microvolt = <825000>;
 		};
-		opp@400000000 {
+		opp-400000000 {
 			opp-hz = /bits/ 64 <400000000>;
 			opp-microvolt = <875000>;
 		};
@@ -292,23 +292,23 @@ Example2 :
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@50000000 {
+		opp-50000000 {
 			opp-hz = /bits/ 64 <50000000>;
 			opp-microvolt = <900000>;
 		};
-		opp@80000000 {
+		opp-80000000 {
 			opp-hz = /bits/ 64 <80000000>;
 			opp-microvolt = <900000>;
 		};
-		opp@100000000 {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 			opp-microvolt = <1000000>;
 		};
-		opp@134000000 {
+		opp-134000000 {
 			opp-hz = /bits/ 64 <134000000>;
 			opp-microvolt = <1000000>;
 		};
-		opp@200000000 {
+		opp-200000000 {
 			opp-hz = /bits/ 64 <200000000>;
 			opp-microvolt = <1000000>;
 		};
@@ -318,19 +318,19 @@ Example2 :
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@50000000 {
+		opp-50000000 {
 			opp-hz = /bits/ 64 <50000000>;
 		};
-		opp@80000000 {
+		opp-80000000 {
 			opp-hz = /bits/ 64 <80000000>;
 		};
-		opp@100000000 {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
-		opp@200000000 {
+		opp-200000000 {
 			opp-hz = /bits/ 64 <200000000>;
 		};
-		opp@400000000 {
+		opp-400000000 {
 			opp-hz = /bits/ 64 <400000000>;
 		};
 	};
@@ -339,19 +339,19 @@ Example2 :
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@50000000 {
+		opp-50000000 {
 			opp-hz = /bits/ 64 <50000000>;
 		};
-		opp@80000000 {
+		opp-80000000 {
 			opp-hz = /bits/ 64 <80000000>;
 		};
-		opp@100000000 {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
-		opp@200000000 {
+		opp-200000000 {
 			opp-hz = /bits/ 64 <200000000>;
 		};
-		opp@300000000 {
+		opp-300000000 {
 			opp-hz = /bits/ 64 <300000000>;
 		};
 	};
@@ -360,13 +360,13 @@ Example2 :
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@50000000 {
+		opp-50000000 {
 			opp-hz = /bits/ 64 <50000000>;
 		};
-		opp@80000000 {
+		opp-80000000 {
 			opp-hz = /bits/ 64 <80000000>;
 		};
-		opp@100000000 {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 	};

Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt

@@ -94,6 +94,7 @@ Required properties:
     * allwinner,sun6i-a31-display-backend
     * allwinner,sun8i-a33-display-backend
   - reg: base address and size of the memory-mapped region.
+  - interrupts: interrupt associated to this IP
   - clocks: phandles to the clocks feeding the frontend and backend
     * ahb: the backend interface clock
     * mod: the backend module clock
@@ -265,6 +266,7 @@ fe0: display-frontend@1e00000 {
 be0: display-backend@1e60000 {
 	compatible = "allwinner,sun5i-a13-display-backend";
 	reg = <0x01e60000 0x10000>;
+	interrupts = <47>;
 	clocks = <&ahb_gates 44>, <&de_be_clk>,
 		 <&dram_gates 26>;
 	clock-names = "ahb", "mod",

Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt

@@ -35,6 +35,14 @@ Optional properties:
   - interrupt-names and interrupts:
     * pmu: Power Management Unit interrupt, if implemented in hardware
 
+  - memory-region:
+    Memory region to allocate from, as defined in
+    Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt
+
+  - operating-points-v2:
+    Operating Points for the GPU, as defined in
+    Documentation/devicetree/bindings/opp/opp.txt
+
 Vendor-specific bindings
 ------------------------
 

Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt

@@ -5,6 +5,7 @@ Required properties:
   Currently recognized values:
   - nvidia,gk20a
   - nvidia,gm20b
+  - nvidia,gp10b
 - reg: Physical base address and length of the controller's registers.
   Must contain two entries:
   - first entry for bar0
@@ -14,7 +15,8 @@ Required properties:
 - interrupt-names: Must include the following entries:
   - stall
   - nonstall
-- vdd-supply: regulator for supply voltage.
+- vdd-supply: regulator for supply voltage. Only required for GPUs not using
+  power domains.
 - clocks: Must contain an entry for each entry in clock-names.
   See ../clocks/clock-bindings.txt for details.
 - clock-names: Must include the following entries:
@@ -27,6 +29,8 @@ is also required:
   See ../reset/reset.txt for details.
 - reset-names: Must include the following entries:
   - gpu
+- power-domains: GPUs that make use of power domains can define this property
+  instead of vdd-supply. Currently "nvidia,gp10b" makes use of this.
 
 Optional properties:
 - iommus: A reference to the IOMMU. See ../iommu/iommu.txt for details.
@@ -68,3 +72,22 @@ Example for GM20B:
 		iommus = <&mc TEGRA_SWGROUP_GPU>;
 		status = "disabled";
 	};
+
+Example for GP10B:
+
+	gpu@17000000 {
+		compatible = "nvidia,gp10b";
+		reg = <0x0 0x17000000 0x0 0x1000000>,
+		      <0x0 0x18000000 0x0 0x1000000>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&bpmp TEGRA186_CLK_GPCCLK>,
+			 <&bpmp TEGRA186_CLK_GPU>;
+		clock-names = "gpu", "pwr";
+		resets = <&bpmp TEGRA186_RESET_GPU>;
+		reset-names = "gpu";
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
+		iommus = <&smmu TEGRA186_SID_GPU>;
+		status = "disabled";
+	};

Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt

@@ -40,6 +40,7 @@ Required properties:
                  w25x80
                  w25x32
                  w25q32
+                 w25q64
                  w25q32dw
                  w25q80bl
                  w25q128

Documentation/devicetree/bindings/net/marvell,prestera.txt

@@ -32,19 +32,16 @@ DFX Server bindings
 -------------------
 
 Required properties:
-- compatible: must be "marvell,dfx-server"
+- compatible: must be "marvell,dfx-server", "simple-bus"
+- ranges: describes the address mapping of a memory-mapped bus.
 - reg: address and length of the register set for the device.
 
 Example:
 
-dfx-registers {
-	compatible = "simple-bus";
+dfx-server {
+	compatible = "marvell,dfx-server", "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
-
-	dfx: dfx@0 {
-		compatible = "marvell,dfx-server";
-		reg = <0 0x100000>;
-	};
+	reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
 };

Documentation/devicetree/bindings/usb/dwc2.txt

@@ -14,6 +14,10 @@ Required properties:
   - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
   - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
   - snps,dwc2: A generic DWC2 USB controller with default parameters.
+  - "st,stm32f4x9-fsotg": The DWC2 USB FS/HS controller instance in STM32F4x9 SoCs
+  configured in FS mode;
+  - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs
+  configured in HS mode;
 - reg : Should contain 1 register range (address and length)
 - interrupts : Should contain 1 interrupt
 - clocks: clock provider specifier

Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt

+Cortina Systems Gemini SoC Watchdog
+
+Required properties:
+- compatible : must be "cortina,gemini-watchdog"
+- reg : shall contain base register location and length
+- interrupts : shall contain the interrupt for the watchdog
+
+Optional properties:
+- timeout-sec : the default watchdog timeout in seconds.
+
+Example:
+
+watchdog@41000000 {
+	compatible = "cortina,gemini-watchdog";
+	reg = <0x41000000 0x1000>;
+	interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};

arch/arm/boot/dts/Makefile

@@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-asus-rt-ac56u.dtb \
 	bcm4708-asus-rt-ac68u.dtb \
 	bcm4708-buffalo-wzr-1750dhp.dtb \
+	bcm4708-linksys-ea6300-v1.dtb \
 	bcm4708-luxul-xap-1510.dtb \
 	bcm4708-luxul-xwc-1000.dtb \
 	bcm4708-netgear-r6250.dtb \
@@ -87,17 +88,21 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm47081-buffalo-wzr-900dhp.dtb \
 	bcm47081-luxul-xap-1410.dtb \
 	bcm47081-luxul-xwr-1200.dtb \
+	bcm47081-tplink-archer-c5-v2.dtb \
 	bcm4709-asus-rt-ac87u.dtb \
 	bcm4709-buffalo-wxr-1900dhp.dtb \
+	bcm4709-linksys-ea9200.dtb \
 	bcm4709-netgear-r7000.dtb \
 	bcm4709-netgear-r8000.dtb \
 	bcm4709-tplink-archer-c9-v1.dtb \
 	bcm47094-dlink-dir-885l.dtb \
+	bcm47094-linksys-panamera.dtb \
 	bcm47094-luxul-xwr-3100.dtb \
 	bcm47094-netgear-r8500.dtb \
 	bcm94708.dtb \
 	bcm94709.dtb \
 	bcm953012er.dtb \
+	bcm953012hr.dtb \
 	bcm953012k.dtb
 dtb-$(CONFIG_ARCH_BCM_53573) += \
 	bcm47189-tenda-ac9.dtb
@@ -173,6 +178,12 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
 	exynos5440-sd5v1.dtb \
 	exynos5440-ssdk5440.dtb \
 	exynos5800-peach-pi.dtb
+dtb-$(CONFIG_ARCH_GEMINI) += \
+	gemini-nas4220b.dtb \
+	gemini-rut1xx.dtb \
+	gemini-sq201.dtb \
+	gemini-wbd111.dtb \
+	gemini-wbd222.dtb
 dtb-$(CONFIG_ARCH_HI3xxx) += \
 	hi3620-hi4511.dtb
 dtb-$(CONFIG_ARCH_HIGHBANK) += \
@@ -352,6 +363,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-gw551x.dtb \
 	imx6dl-gw552x.dtb \
 	imx6dl-gw553x.dtb \
+	imx6dl-gw5903.dtb \
+	imx6dl-gw5904.dtb \
 	imx6dl-hummingboard.dtb \
 	imx6dl-icore.dtb \
 	imx6dl-icore-rqs.dtb \
@@ -395,9 +408,13 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-gw551x.dtb \
 	imx6q-gw552x.dtb \
 	imx6q-gw553x.dtb \
+	imx6q-gw5903.dtb \
+	imx6q-gw5904.dtb \
 	imx6q-h100.dtb \
 	imx6q-hummingboard.dtb \
 	imx6q-icore.dtb \
+	imx6q-icore-ofcap10.dtb \
+	imx6q-icore-ofcap12.dtb \
 	imx6q-icore-rqs.dtb \
 	imx6q-marsboard.dtb \
 	imx6q-mccmon6.dtb \
@@ -425,9 +442,12 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-utilite-pro.dtb \
 	imx6q-wandboard.dtb \
 	imx6q-wandboard-revb1.dtb \
+	imx6q-zii-rdu2.dtb \
 	imx6qp-nitrogen6_max.dtb \
+	imx6qp-nitrogen6_som2.dtb \
 	imx6qp-sabreauto.dtb \
-	imx6qp-sabresd.dtb
+	imx6qp-sabresd.dtb \
+	imx6qp-zii-rdu2.dtb
 dtb-$(CONFIG_SOC_IMX6SL) += \
 	imx6sl-evk.dtb \
 	imx6sl-warp.dtb
@@ -458,6 +478,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-nitrogen7.dtb \
 	imx7d-sbc-imx7.dtb \
 	imx7d-sdb.dtb \
+	imx7d-sdb-sht11.dtb \
 	imx7s-colibri-eval-v3.dtb \
 	imx7s-warp.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
@@ -488,6 +509,10 @@ dtb-$(CONFIG_ARCH_MXS) += \
 	imx28-cfa10056.dtb \
 	imx28-cfa10057.dtb \
 	imx28-cfa10058.dtb \
+	imx28-duckbill-2-485.dtb \
+	imx28-duckbill-2.dtb \
+	imx28-duckbill-2-enocean.dtb \
+	imx28-duckbill-2-spi.dtb \
 	imx28-duckbill.dtb \
 	imx28-eukrea-mbmx283lc.dtb \
 	imx28-eukrea-mbmx287lc.dtb \
@@ -673,6 +698,25 @@ dtb-$(CONFIG_ARCH_REALVIEW) += \
 	arm-realview-eb-a9mp-bbrevd.dtb \
 	arm-realview-pba8.dtb \
 	arm-realview-pbx-a9.dtb
+dtb-$(CONFIG_ARCH_RENESAS) += \
+	emev2-kzm9d.dtb \
+	r7s72100-genmai.dtb \
+	r7s72100-rskrza1.dtb \
+	r8a73a4-ape6evm.dtb \
+	r8a7740-armadillo800eva.dtb \
+	r8a7743-sk-rzg1m.dtb \
+	r8a7745-sk-rzg1e.dtb \
+	r8a7778-bockw.dtb \
+	r8a7779-marzen.dtb \
+	r8a7790-lager.dtb \
+	r8a7791-koelsch.dtb \
+	r8a7791-porter.dtb \
+	r8a7792-blanche.dtb \
+	r8a7792-wheat.dtb \
+	r8a7793-gose.dtb \
+	r8a7794-alt.dtb \
+	r8a7794-silk.dtb \
+	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk1108-evb.dtb \
 	rk3036-evb.dtb \
@@ -692,9 +736,11 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3288-firefly.dtb \
 	rk3288-firefly-reload.dtb \
 	rk3288-miqi.dtb \
+	rk3288-phycore-rdk.dtb \
 	rk3288-popmetal.dtb \
 	rk3288-r89.dtb \
 	rk3288-rock2-square.dtb \
+	rk3288-tinker.dtb \
 	rk3288-veyron-brain.dtb \
 	rk3288-veyron-jaq.dtb \
 	rk3288-veyron-jerry.dtb \
@@ -713,25 +759,6 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
 	s5pv210-smdkc110.dtb \
 	s5pv210-smdkv210.dtb \
 	s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
-	emev2-kzm9d.dtb \
-	r7s72100-genmai.dtb \
-	r7s72100-rskrza1.dtb \
-	r8a73a4-ape6evm.dtb \
-	r8a7740-armadillo800eva.dtb \
-	r8a7743-sk-rzg1m.dtb \
-	r8a7745-sk-rzg1e.dtb \
-	r8a7778-bockw.dtb \
-	r8a7779-marzen.dtb \
-	r8a7790-lager.dtb \
-	r8a7791-koelsch.dtb \
-	r8a7791-porter.dtb \
-	r8a7792-blanche.dtb \
-	r8a7792-wheat.dtb \
-	r8a7793-gose.dtb \
-	r8a7794-alt.dtb \
-	r8a7794-silk.dtb \
-	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
 	socfpga_arria10_socdk_nand.dtb \
@@ -764,7 +791,8 @@ dtb-$(CONFIG_ARCH_STM32)+= \
 	stm32f429-disco.dtb \
 	stm32f469-disco.dtb \
 	stm32429i-eval.dtb \
-	stm32746g-eval.dtb
+	stm32746g-eval.dtb \
+	stm32h743i-eval.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
 	sun4i-a10-ba10-tvbox.dtb \
@@ -868,6 +896,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-h3-beelink-x2.dtb \
 	sun8i-h3-nanopi-m1.dtb	\
 	sun8i-h3-nanopi-neo.dtb \
+	sun8i-h3-nanopi-neo-air.dtb \
 	sun8i-h3-orangepi-2.dtb \
 	sun8i-h3-orangepi-lite.dtb \
 	sun8i-h3-orangepi-one.dtb \
@@ -970,6 +999,8 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
 	armada-385-db-ap.dtb \
 	armada-385-linksys-caiman.dtb \
 	armada-385-linksys-cobra.dtb \
+	armada-385-linksys-shelby.dtb \
+	armada-385-synology-ds116.dtb \
 	armada-385-turris-omnia.dtb \
 	armada-388-clearfog.dtb \
 	armada-388-clearfog-base.dtb \

arch/arm/boot/dts/alpine.dtsi

@@ -41,28 +41,28 @@ cpu@0 {
 			compatible = "arm,cortex-a15";
 			device_type = "cpu";
 			reg = <0>;
-			clock-frequency = <0>; /* Filled by loader */
+			clock-frequency = <1700000000>;
 		};
 
 		cpu@1 {
 			compatible = "arm,cortex-a15";
 			device_type = "cpu";
 			reg = <1>;
-			clock-frequency = <0>; /* Filled by loader */
+			clock-frequency = <1700000000>;
 		};
 
 		cpu@2 {
 			compatible = "arm,cortex-a15";
 			device_type = "cpu";
 			reg = <2>;
-			clock-frequency = <0>; /* Filled by loader */
+			clock-frequency = <1700000000>;
 		};
 
 		cpu@3 {
 			compatible = "arm,cortex-a15";
 			device_type = "cpu";
 			reg = <3>;
-			clock-frequency = <0>; /* Filled by loader */
+			clock-frequency = <1700000000>;
 		};
 	};
 
@@ -81,7 +81,7 @@ arch-timer {
 				<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 				<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 				<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-			clock-frequency = <0>; /* Filled by loader */
+			clock-frequency = <50000000>;
 		};
 
 		/* Interrupt Controller */
@@ -120,26 +120,26 @@ pmu {
 				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		uart0:uart@fd883000 {
+		uart0: uart@fd883000 {
 			compatible = "ns16550a";
 			reg = <0x0 0xfd883000 0x0 0x1000>;
-			clock-frequency = <0>; /* Filled by loader */
+			clock-frequency = <375000000>;
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 		};
 
-		uart1:uart@0xfd884000 {
+		uart1: uart@fd884000 {
 			compatible = "ns16550a";
 			reg = <0x0 0xfd884000 0x0 0x1000>;
-			clock-frequency = <0>; /* Filled by loader */
+			clock-frequency = <375000000>;
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 		};
 
 		/* Internal PCIe Controller */
-		pcie-internal@0xfbc00000 {
+		pcie@fbc00000 {
 			compatible = "pci-host-ecam-generic";
 			device_type = "pci";
 			#size-cells = <2>;

arch/arm/boot/dts/am335x-baltos-ir2110.dts

@@ -14,6 +14,7 @@
 /dts-v1/;
 
 #include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
 
 / {
 	model = "OnRISC Baltos iR 2110";

arch/arm/boot/dts/am335x-baltos-ir3220.dts

@@ -14,6 +14,7 @@
 /dts-v1/;
 
 #include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
 
 / {
 	model = "OnRISC Baltos iR 3220";

arch/arm/boot/dts/am335x-baltos-ir5221.dts

@@ -14,6 +14,7 @@
 /dts-v1/;
 
 #include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
 
 / {
 	model = "OnRISC Baltos iR 5221";

arch/arm/boot/dts/am335x-baltos-leds.dtsi

+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/*#include "am33xx.dtsi"*/
+
+/ {
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds>;
+
+		compatible = "gpio-leds";
+
+		power {
+			label = "onrisc:red:power";
+			linux,default-trigger = "default-on";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		wlan {
+			label = "onrisc:blue:wlan";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		app {
+			label = "onrisc:green:app";
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	user_leds: pinmux_user_leds {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mii1_col.gpio3_0 PWR LED */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mii1_txd3.gpio0_16 WLAN LED */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mii1_txd2.gpio0_17 APP LED */
+		>;
+	};
+};

arch/arm/boot/dts/am335x-boneblack.dts

@@ -15,3 +15,14 @@ / {
 	model = "TI AM335x BeagleBone Black";
 	compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
 };
+
+&cpu0_opp_table {
+	/*
+	 * All PG 2.0 silicon may not support 1GHz but some of the early
+	 * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
+	 * to support 1GHz OPP so enable it for PG 2.0 on this board.
+	 */
+	oppnitro@1000000000 {
+		opp-supported-hw = <0x06 0x0100>;
+	};
+};

arch/arm/boot/dts/am335x-icev2.dts

@@ -201,6 +201,69 @@ AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd
 			AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLUP | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
 		>;
 	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1, RMII mode */
+			AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_crs.rmii1_crs_dv */
+			AM33XX_IOPAD(0x944, (PIN_INPUT_PULLUP | MUX_MODE0))	/* rmii1_refclk.rmii1_refclk */
+			AM33XX_IOPAD(0x940, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_IOPAD(0x910, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_rxerr.rmii1_rxerr */
+			AM33XX_IOPAD(0x928, (PIN_OUTPUT_PULLDOWN | MUX_MODE1))	/* mii1_txd0.rmii1_txd0 */
+			AM33XX_IOPAD(0x924, (PIN_OUTPUT_PULLDOWN | MUX_MODE1))	/* mii1_txd1.rmii1_txd1 */
+			AM33XX_IOPAD(0x914, (PIN_OUTPUT_PULLDOWN | MUX_MODE1))	/* mii1_txen.rmii1_txen */
+			/* Slave 2, RMII mode */
+			AM33XX_IOPAD(0x870, (PIN_INPUT_PULLUP | MUX_MODE3))	/* gpmc_wait0.rmii2_crs_dv */
+			AM33XX_IOPAD(0x908, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_col.rmii2_refclk */
+			AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLUP | MUX_MODE3))	/* gpmc_a11.rmii2_rxd0 */
+			AM33XX_IOPAD(0x868, (PIN_INPUT_PULLUP | MUX_MODE3))	/* gpmc_a10.rmii2_rxd1 */
+			AM33XX_IOPAD(0x874, (PIN_INPUT_PULLUP | MUX_MODE3))	/* gpmc_wpn.rmii2_rxerr */
+			AM33XX_IOPAD(0x854, (PIN_OUTPUT_PULLDOWN | MUX_MODE3))	/* gpmc_a5.rmii2_txd0 */
+			AM33XX_IOPAD(0x850, (PIN_OUTPUT_PULLDOWN | MUX_MODE3))	/* gpmc_a4.rmii2_txd1 */
+			AM33XX_IOPAD(0x840, (PIN_OUTPUT_PULLDOWN | MUX_MODE3))	/* gpmc_a0.rmii2_txen */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x944, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x940, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x910, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x928, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x924, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x914, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+
+			/* Slave 2 reset value */
+			AM33XX_IOPAD(0x870, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x908, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x868, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x874, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x854, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x850, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x840, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_IOPAD(0x948, (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0))	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, (PIN_OUTPUT_PULLUP | MUX_MODE0))			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x94c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+		>;
+	};
 };
 
 &i2c0 {
@@ -245,6 +308,39 @@ sn65hvs882@1 {
 		spi-max-frequency = <1000000>;
 		spi-cpol;
 	};
+
+	spi_nor: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q64", "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "u-boot";
+			reg = <0x80000 0x100000>;
+			read-only;
+		};
+
+		partition@2 {
+			label = "u-boot-env";
+			reg = <0x180000 0x20000>;
+			read-only;
+		};
+
+		partition@3 {
+			label = "misc";
+			reg = <0x1A0000 0x660000>;
+		};
+	};
+
 };
 
 &tscadc {
@@ -350,3 +446,61 @@ &uart3 {
 	pinctrl-0 = <&uart3_pins_default>;
 	status = "okay";
 };
+
+&gpio3 {
+	p4 {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PR1_MII_CTRL";
+	};
+
+	p10 {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		/* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */
+		output-high;
+		line-name = "MUX_MII_CTL1";
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+	dual_emac;
+};
+
+&phy_sel {
+	rmii-clock-ext;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+	reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <2>;   /* PHY datasheet states 1uS min */
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	ethphy1: ethernet-phy@3 {
+		reg = <3>;
+	};
+};

arch/arm/boot/dts/am33xx.dtsi

@@ -46,19 +46,7 @@ cpu@0 {
 			device_type = "cpu";
 			reg = <0>;
 
-			/*
-			 * To consider voltage drop between PMIC and SoC,
-			 * tolerance value is reduced to 2% from 4% and
-			 * voltage value is increased as a precaution.
-			 */
-			operating-points = <
-				/* kHz    uV */
-				720000  1285000
-				600000  1225000
-				500000  1125000
-				275000  1125000
-			>;
-			voltage-tolerance = <2>; /* 2 percentage */
+			operating-points-v2 = <&cpu0_opp_table>;
 
 			clocks = <&dpll_mpu_ck>;
 			clock-names = "cpu";
@@ -67,6 +55,79 @@ cpu@0 {
 		};
 	};
 
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
+
+		/*
+		 * The three following nodes are marked with opp-suspend
+		 * because the can not be enabled simultaneously on a
+		 * single SoC.
+		 */
+		opp50@300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <950000 931000 969000>;
+			opp-supported-hw = <0x06 0x0010>;
+			opp-suspend;
+		};
+
+		opp100@275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x01 0x00FF>;
+			opp-suspend;
+		};
+
+		opp100@300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x06 0x0020>;
+			opp-suspend;
+		};
+
+		opp100@500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x01 0xFFFF>;
+		};
+
+		opp100@600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x06 0x0040>;
+		};
+
+		opp120@600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1200000 1176000 1224000>;
+			opp-supported-hw = <0x01 0xFFFF>;
+		};
+
+		opp120@720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1200000 1176000 1224000>;
+			opp-supported-hw = <0x06 0x0080>;
+		};
+
+		oppturbo@720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1260000 1234800 1285200>;
+			opp-supported-hw = <0x01 0xFFFF>;
+		};
+
+		oppturbo@800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1260000 1234800 1285200>;
+			opp-supported-hw = <0x06 0x0100>;
+		};
+
+		oppnitro@1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1325000 1298500 1351500>;
+			opp-supported-hw = <0x04 0x0200>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,cortex-a8-pmu";
 		interrupts = <3>;

arch/arm/boot/dts/am3517.dtsi

@@ -13,6 +13,7 @@
 / {
 	aliases {
 		serial3 = &uart4;
+		can = &hecc;
 	};
 
 	ocp@68000000 {
@@ -72,6 +73,17 @@ omap3_pmx_core2: pinmux@480025d8 {
 			pinctrl-single,register-width = <16>;
 			pinctrl-single,function-mask = <0xff1f>;
 		};
+
+		hecc: can@5c050000 {
+			compatible = "ti,am3517-hecc";
+			status = "disabled";
+			reg = <0x5c050000 0x80>,
+			      <0x5c053000 0x180>,
+			      <0x5c052000 0x200>;
+			reg-names = "hecc", "hecc-ram", "mbx";
+			interrupts = <24>;
+			clocks = <&hecc_ck>;
+		};
 	};
 };
 

arch/arm/boot/dts/am4372.dtsi

@@ -50,15 +50,14 @@ cpu: cpu@0 {
 			clock-names = "cpu";
 
 			operating-points-v2 = <&cpu0_opp_table>;
-			ti,syscon-efuse = <&scm_conf 0x610 0x3f 0>;
-			ti,syscon-rev = <&scm_conf 0x600>;
 
 			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 	};
 
-	cpu0_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
 
 		opp50@300000000 {
 			opp-hz = /bits/ 64 <300000000>;

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -501,6 +501,21 @@ AM4372_IOPAD(0x880, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
 			AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
 		>;
 	};
+
+	uart0_pins_default: uart0_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x968, PIN_INPUT | MUX_MODE0)		/* uart0_ctsn.uart0_ctsn */
+			AM4372_IOPAD(0x96C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_rtsn.uart0_rtsn */
+			AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM4372_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_default>;
 };
 
 &i2c0 {

arch/arm/boot/dts/am57xx-idk-common.dtsi

@@ -101,6 +101,22 @@ led-out7 {
 	};
 };
 
+&dra7_pmx_core {
+	dcan1_pins_default: dcan1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* dcan1_tx */
+			DRA7XX_CORE_IOPAD(0x37d4, PIN_INPUT_PULLUP | MUX_MODE0)		/* dcan1_rx */
+		>;
+	};
+
+	dcan1_pins_sleep: dcan1_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP)	/* dcan1_rx.off */
+		>;
+	};
+};
+
 &i2c1 {
 	status = "okay";
 	clock-frequency = <400000>;
@@ -391,6 +407,14 @@ &mmc2 {
 	max-frequency = <96000000>;
 };
 
+&dcan1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
+	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
+};
+
 &qspi {
 	status = "okay";
 

arch/arm/boot/dts/armada-385-linksys-shelby.dts

+/*
+ * Device Tree file for the Linksys WRT1900ACS (Shelby)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT1900ACS";
+	compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+
+	soc {
+		internal-regs{
+			i2c@11000 {
+
+				pca9635@68 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+					wan_amber@0 {
+						label = "shelby:amber:wan";
+						reg = <0x0>;
+					};
+
+					wan_white@1 {
+						label = "shelby:white:wan";
+						reg = <0x1>;
+					};
+
+					wlan_2g@2 {
+						label = "shelby:white:wlan_2g";
+						reg = <0x2>;
+					};
+
+					wlan_5g@3 {
+						label = "shelby:white:wlan_5g";
+						reg = <0x3>;
+					};
+
+					usb2@5 {
+						label = "shelby:white:usb2";
+						reg = <0x5>;
+					};
+
+					usb3_1@6 {
+						label = "shelby:white:usb3_1";
+						reg = <0x6>;
+					};
+
+					usb3_2@7 {
+						label = "shelby:white:usb3_2";
+						reg = <0x7>;
+					};
+
+					wps_white@8 {
+						label = "shelby:white:wps";
+						reg = <0x8>;
+					};
+
+					wps_amber@9 {
+						label = "shelby:amber:wps";
+						reg = <0x9>;
+					};
+				};
+			};
+		};
+	};
+
+	gpio-leds {
+		power {
+			label = "shelby:white:power";
+		};
+
+		sata {
+			label = "shelby:white:sata";
+		};
+	};
+};

arch/arm/boot/dts/armada-385-linksys.dtsi

@@ -59,7 +59,8 @@ soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
 			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
 			i2c@11000 {
@@ -88,6 +89,9 @@ serial@12000 {
 			ethernet@70000 {
 				status = "okay";
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
@@ -97,6 +101,9 @@ fixed-link {
 			ethernet@34000 {
 				status = "okay";
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
@@ -159,6 +166,10 @@ sata@a8000 {
 				status = "okay";
 			};
 
+			bm@c8000 {
+				status = "okay";
+			};
+
 			/* USB part of the eSATA/USB 2.0 port */
 			usb@58000 {
 				status = "okay";
@@ -241,6 +252,10 @@ partition@180000 {
 			};
 		};
 
+		bm-bppi {
+			status = "okay";
+		};
+
 		pcie-controller {
 			status = "okay";
 
@@ -305,6 +320,7 @@ power {
 		sata {
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 			default-state = "off";
+			linux,default-trigger = "disk-activity";
 		};
 	};
 

arch/arm/boot/dts/armada-385-synology-ds116.dts

+/*
+ * Device Tree file for Synology DS116 NAS
+ *
+ * Copyright (C) 2017 Willy Tarreau <w@1wt.eu>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Synology DS116";
+	compatible = "marvell,a385-gp", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@57 {
+					compatible = "atmel,24c64";
+					reg = <0x57>;
+				};
+			};
+
+			serial@12000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+
+			serial@12100 {
+				/* A PIC16F1829 is connected to uart1 at 9600 bps,
+				 * and takes single-character orders :
+				 *   "1" : power off // already handled by the poweroff node
+				 *   "2" : short beep
+				 *   "3" : long beep
+				 *   "4" : turn the power LED ON
+				 *   "5" : flash the power LED
+				 *   "6" : turn the power LED OFF
+				 *   "7" : turn the status LED OFF
+				 *   "8" : turn the status LED ON
+				 *   "9" : flash the status LED
+				 *   "A" : flash the motherboard LED (D8)
+				 *   "B" : turn the motherboard LED OFF
+				 *   "C" : hard reset
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_pins>;
+				status = "okay";
+			};
+
+			poweroff@12100 {
+				compatible = "synology,power-off";
+				reg = <0x12100 0x100>;
+				clocks = <&coreclk 0>;
+			};
+
+			ethernet@70000 {
+				pinctrl-names = "default";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				status = "okay";
+			};
+
+
+			mdio@72004 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&mdio_pins>;
+
+				phy0: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@a8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sata0_pins>;
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata0: sata-port@0 {
+					reg = <0>;
+					target-supply = <&reg_5v_sata0>;
+				};
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				usb-phy = <&usb3_0_phy>;
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				usb-phy = <&usb3_1_phy>;
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+
+		gpio-fan {
+			compatible = "gpio-fan";
+			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
+				<&gpio1 17 GPIO_ACTIVE_HIGH>,
+				<&gpio1 16 GPIO_ACTIVE_HIGH>;
+			gpio-fan,speed-map = <   0 0
+					      1500 1
+					      2500 2
+					      3000 3
+					      3400 4
+					      3700 5
+					      3900 6
+					      4000 7>;
+			cooling-cells = <2>;
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			/* The green part is on gpio0.20 which is also used by
+			 * sata0, and accesses to SATA disk 0 make it blink so it
+			 * doesn't need to be declared here.
+			 */
+			orange {
+				gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+				label = "ds116:orange:disk";
+				default-state = "off";
+			};
+		};
+	};
+
+	usb3_0_phy: usb3_0_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_0_vbus>;
+	};
+
+	usb3_1_phy: usb3_1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_1_vbus>;
+	};
+
+	reg_usb3_0_vbus: usb3-vbus0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&xhci0_vbus_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb3_1_vbus: usb3-vbus1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&xhci1_vbus_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_sata0: pwr-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata0: v5-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_sata0>;
+	};
+
+	reg_12v_sata0: v12-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&reg_sata0>;
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "macronix,mx25l6405d", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		/* Note: there is a redboot partition table despite u-boot
+		 * being used. The names presented here are the same as those
+		 * found in the FIS directory. There is also a small device
+		 * tree in the last 64kB of the RedBoot partition which is not
+		 * enumerated. The MAC address and the serial number are listed
+		 * in the "vendor" partition.
+		 */
+		partition@00000000 {
+			label = "RedBoot";
+			reg = <0x00000000 0x000f0000>;
+			read-only;
+		};
+
+		partition@000c0000 {
+			label = "zImage";
+			reg = <0x000f0000 0x002d0000>;
+		};
+
+		partition@00390000 {
+			label = "rd.gz";
+			reg = <0x003c0000 0x00410000>;
+		};
+
+		partition@007d0000 {
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>;
+			read-only;
+		};
+
+		partition@007e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>;
+			read-only;
+		};
+
+		partition@007f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>;
+			read-only;
+		};
+	};
+};
+
+&pinctrl {
+	/* use only one pin for UART1, as mpp20 is used by sata0 */
+	uart1_pins: uart-pins-1 {
+		marvell,pins = "mpp19";
+		marvell,function = "ua1";
+	};
+
+	xhci0_vbus_pins: xhci0_vbus_pins {
+		marvell,pins = "mpp58";
+		marvell,function = "gpio";
+	};
+	xhci1_vbus_pins: xhci1_vbus_pins {
+		marvell,pins = "mpp59";
+		marvell,function = "gpio";
+	};
+};

arch/arm/boot/dts/armada-385.dtsi

@@ -70,13 +70,7 @@ cpu@1 {
 	};
 
 	soc {
-		internal-regs {
-			pinctrl@18000 {
-				compatible = "marvell,mv88f6820-pinctrl";
-			};
-		};
-
-		pcie-controller {
+		pciec: pcie-controller {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -106,7 +100,7 @@ pcie-controller {
 			 * configured in x4 by the bootloader, then
 			 * pcie@4,0 is not available.
 			 */
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -124,7 +118,7 @@ pcie@1,0 {
 			};
 
 			/* x1 port */
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -142,7 +136,7 @@ pcie@2,0 {
 			};
 
 			/* x1 port */
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
@@ -163,7 +157,7 @@ pcie@3,0 {
 			 * x1 port only available when pcie@1,0 is
 			 * configured as a x1 port
 			 */
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
@@ -182,3 +176,7 @@ pcie@4,0 {
 		};
 	};
 };
+
+&pinctrl {
+	compatible = "marvell,mv88f6820-pinctrl";
+};

arch/arm/boot/dts/armada-388-clearfog.dts

@@ -186,25 +186,6 @@ pcie2_0_w_disable {
 	};
 };
 
-&pinctrl {
-	clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
-		marvell,pins = "mpp46";
-		marvell,function = "ref";
-	};
-	clearfog_dsa0_pins: clearfog-dsa0-pins {
-		marvell,pins = "mpp23", "mpp41";
-		marvell,function = "gpio";
-	};
-	clearfog_spi1_cs_pins: spi1-cs-pins {
-		marvell,pins = "mpp55";
-		marvell,function = "spi1";
-	};
-	rear_button_pins: rear-button-pins {
-		marvell,pins = "mpp34";
-		marvell,function = "gpio";
-	};
-};
-
 &mdio {
 	status = "okay";
 
@@ -268,6 +249,25 @@ fixed-link {
 	};
 };
 
+&pinctrl {
+	clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
+		marvell,pins = "mpp46";
+		marvell,function = "ref";
+	};
+	clearfog_dsa0_pins: clearfog-dsa0-pins {
+		marvell,pins = "mpp23", "mpp41";
+		marvell,function = "gpio";
+	};
+	clearfog_spi1_cs_pins: spi1-cs-pins {
+		marvell,pins = "mpp55";
+		marvell,function = "spi1";
+	};
+	rear_button_pins: rear-button-pins {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+};
+
 &spi1 {
 	/*
 	 * Add SPI CS pins for clearfog:

arch/arm/boot/dts/armada-388.dtsi

@@ -50,13 +50,8 @@ / {
 	model = "Marvell Armada 388 family SoC";
 	compatible = "marvell,armada388", "marvell,armada385",
 		"marvell,armada380";
-
 	soc {
 		internal-regs {
-			pinctrl@18000 {
-				compatible = "marvell,mv88f6828-pinctrl";
-			};
-
 			sata@e0000 {
 				compatible = "marvell,armada-380-ahci";
 				reg = <0xe0000 0x2000>;
@@ -68,3 +63,7 @@ sata@e0000 {
 		};
 	};
 };
+
+&pinctrl {
+	compatible = "marvell,mv88f6828-pinctrl";
+};

arch/arm/boot/dts/armada-38x.dtsi

@@ -82,7 +82,7 @@ bootrom {
 			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
 		};
 
-		devbus-bootcs {
+		devbus_bootcs: devbus-bootcs {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -92,7 +92,7 @@ devbus-bootcs {
 			status = "disabled";
 		};
 
-		devbus-cs0 {
+		devbus_cs0: devbus-cs0 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -102,7 +102,7 @@ devbus-cs0 {
 			status = "disabled";
 		};
 
-		devbus-cs1 {
+		devbus_cs1: devbus-cs1 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -112,7 +112,7 @@ devbus-cs1 {
 			status = "disabled";
 		};
 
-		devbus-cs2 {
+		devbus_cs2: devbus-cs2 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -122,7 +122,7 @@ devbus-cs2 {
 			status = "disabled";
 		};
 
-		devbus-cs3 {
+		devbus_cs3: devbus-cs3 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -339,7 +339,7 @@ gpio1: gpio@18140 {
 					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			system-controller@18200 {
+			systemc: system-controller@18200 {
 				compatible = "marvell,armada-380-system-controller",
 					     "marvell,armada-370-xp-system-controller";
 				reg = <0x18200 0x100>;
@@ -360,7 +360,8 @@ coreclk: mvebu-sar@18600 {
 
 			mbusc: mbus-controller@20000 {
 				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>;
+				reg = <0x20000 0x100>, <0x20180 0x20>,
+				      <0x20250 0x8>;
 			};
 
 			mpic: interrupt-controller@20a00 {
@@ -373,7 +374,7 @@ mpic: interrupt-controller@20a00 {
 				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			timer@20300 {
+			timer: timer@20300 {
 				compatible = "marvell,armada-380-timer",
 					     "marvell,armada-xp-timer";
 				reg = <0x20300 0x30>, <0x21040 0x30>;
@@ -387,14 +388,14 @@ timer@20300 {
 				clock-names = "nbclk", "fixed";
 			};
 
-			watchdog@20300 {
+			watchdog: watchdog@20300 {
 				compatible = "marvell,armada-380-wdt";
 				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
 				clocks = <&coreclk 2>, <&refclk>;
 				clock-names = "nbclk", "fixed";
 			};
 
-			cpurst@20800 {
+			cpurst: cpurst@20800 {
 				compatible = "marvell,armada-370-cpu-reset";
 				reg = <0x20800 0x10>;
 			};
@@ -404,12 +405,12 @@ mpcore-soc-ctrl@20d20 {
 				reg = <0x20d20 0x6c>;
 			};
 
-			coherency-fabric@21010 {
+			coherencyfab: coherency-fabric@21010 {
 				compatible = "marvell,armada-380-coherency-fabric";
 				reg = <0x21010 0x1c>;
 			};
 
-			pmsu@22000 {
+			pmsu: pmsu@22000 {
 				compatible = "marvell,armada-380-pmsu";
 				reg = <0x22000 0x1000>;
 			};
@@ -451,7 +452,7 @@ eth2: ethernet@34000 {
 				status = "disabled";
 			};
 
-			usb@58000 {
+			usb0: usb@58000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x58000 0x500>;
 				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
@@ -459,7 +460,7 @@ usb@58000 {
 				status = "disabled";
 			};
 
-			xor@60800 {
+			xor0: xor@60800 {
 				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
 				reg = <0x60800 0x100
 				       0x60a00 0x100>;
@@ -479,7 +480,7 @@ xor01 {
 				};
 			};
 
-			xor@60900 {
+			xor1: xor@60900 {
 				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
@@ -507,7 +508,7 @@ mdio: mdio@72004 {
 				clocks = <&gateclk 4>;
 			};
 
-			crypto@90000 {
+			cesa: crypto@90000 {
 				compatible = "marvell,armada-38x-crypto";
 				reg = <0x90000 0x10000>;
 				reg-names = "regs";
@@ -522,14 +523,14 @@ crypto@90000 {
 				marvell,crypto-sram-size = <0x800>;
 			};
 
-			rtc@a3800 {
+			rtc: rtc@a3800 {
 				compatible = "marvell,armada-380-rtc";
 				reg = <0xa3800 0x20>, <0x184a0 0x0c>;
 				reg-names = "rtc", "rtc-soc";
 				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			sata@a8000 {
+			ahci0: sata@a8000 {
 				compatible = "marvell,armada-380-ahci";
 				reg = <0xa8000 0x2000>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -545,7 +546,7 @@ bm: bm@c8000 {
 				status = "disabled";
 			};
 
-			sata@e0000 {
+			ahci1: sata@e0000 {
 				compatible = "marvell,armada-380-ahci";
 				reg = <0xe0000 0x2000>;
 				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
@@ -561,13 +562,13 @@ coredivclk: clock@e4250 {
 				clock-output-names = "nand";
 			};
 
-			thermal@e8078 {
+			thermal: thermal@e8078 {
 				compatible = "marvell,armada380-thermal";
 				reg = <0xe4078 0x4>, <0xe4074 0x4>;
 				status = "okay";
 			};
 
-			flash@d0000 {
+			nand: flash@d0000 {
 				compatible = "marvell,armada370-nand";
 				reg = <0xd0000 0x54>;
 				#address-cells = <1>;
@@ -577,7 +578,7 @@ flash@d0000 {
 				status = "disabled";
 			};
 
-			sdhci@d8000 {
+			sdhci: sdhci@d8000 {
 				compatible = "marvell,armada-380-sdhci";
 				reg-names = "sdhci", "mbus", "conf-sdio3";
 				reg = <0xd8000 0x1000>,
@@ -589,7 +590,7 @@ sdhci@d8000 {
 				status = "disabled";
 			};
 
-			usb3@f0000 {
+			usb3_0: usb3@f0000 {
 				compatible = "marvell,armada-380-xhci";
 				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
 				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
@@ -597,7 +598,7 @@ usb3@f0000 {
 				status = "disabled";
 			};
 
-			usb3@f8000 {
+			usb3_1: usb3@f8000 {
 				compatible = "marvell,armada-380-xhci";
 				reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/armada-xp-98dx3236.dtsi

@@ -45,11 +45,14 @@
  * common to all Armada XP SoCs.
  */
 
-#include "armada-xp.dtsi"
+#include "armada-370-xp.dtsi"
 
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
 	model = "Marvell 98DX3236 SoC";
-	compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
 
 	aliases {
 		gpio0 = &gpio0;
@@ -72,12 +75,19 @@ cpu@0 {
 	};
 
 	soc {
+		compatible = "marvell,armadaxp-mbus", "simple-bus";
+
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
 			  MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
 			  MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
 
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
 		/*
 		 * 98DX3236 has 1 x1 PCIe unit Gen2.0
 		 */
@@ -95,8 +105,7 @@ pciec: pcie-controller@82000000 {
 			ranges =
 			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
 				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>;
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */>;
 
 			pcie1: pcie@1,0 {
 				device_type = "pci";
@@ -117,31 +126,86 @@ pcie1: pcie@1,0 {
 		};
 
 		internal-regs {
-			coreclk: mvebu-sar@18230 {
-				compatible = "marvell,mv98dx3236-core-clock";
+			sdramc@1400 {
+				compatible = "marvell,armada-xp-sdram-controller";
+				reg = <0x1400 0x500>;
+			};
+
+			L2: l2-cache@8000 {
+				compatible = "marvell,aurora-system-cache";
+				reg = <0x08000 0x1000>;
+				cache-id-part = <0x100>;
+				cache-level = <2>;
+				cache-unified;
+				wt-override;
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
+
+			/* does not exist */
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				status = "disabled";
+			};
+
+			gpio2: gpio@18180 { /* rework some properties */
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <1>; /* only gpio #32 */
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>;
+			};
+
+			systemc: system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x500>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,mv98dx3236-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
 			};
 
 			cpuclk: clock-complex@18700 {
+				#clock-cells = <1>;
 				compatible = "marvell,mv98dx3236-cpu-clock";
+				reg = <0x18700 0x24>, <0x1c054 0x10>;
+				clocks = <&coreclk 1>;
 			};
 
 			corediv-clock@18740 {
 				status = "disabled";
 			};
 
-			xor@60900 {
-				status = "disabled";
+			cpu-config@21000 {
+				compatible = "marvell,armada-xp-cpu-config";
+				reg = <0x21000 0x8>;
 			};
 
-			crypto@90000 {
-				status = "disabled";
+			ethernet@70000 {
+				compatible = "marvell,armada-xp-neta";
 			};
 
-			xor@f0900 {
-				status = "disabled";
+			ethernet@74000 {
+				compatible = "marvell,armada-xp-neta";
 			};
 
-			xor@f0800 {
+			xor1: xor@f0800 {
 				compatible = "marvell,orion-xor";
 				reg = <0xf0800 0x100
 				       0xf0a00 0x100>;
@@ -161,45 +225,43 @@ xor11 {
 				};
 			};
 
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-			};
-
-			/* does not exist */
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				status = "disabled";
+			nand: nand@d0000 {
+				clocks = <&dfx_coredivclk 0>;
 			};
 
-			gpio2: gpio@18180 { /* rework some properties */
-				compatible = "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <1>; /* only gpio #32 */
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>;
-			};
+			xor0: xor@f0900 {
+				compatible = "marvell,orion-xor";
+				reg = <0xF0900 0x100
+				       0xF0B00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
 
-			nand: nand@d0000 {
-				clocks = <&dfx_coredivclk 0>;
+				xor00 {
+					interrupts = <94>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <95>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
 			};
 		};
 
-		dfxr: dfx-registers@ac000000 {
-			compatible = "simple-bus";
+		dfx: dfx-server@ac000000 {
+			compatible = "marvell,dfx-server", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
+			reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
+
+			coreclk: mvebu-sar@f8204 {
+				compatible = "marvell,mv98dx3236-core-clock";
+				reg = <0xf8204 0x4>;
+				#clock-cells = <1>;
+			};
 
 			dfx_coredivclk: corediv-clock@f8268 {
 				compatible = "marvell,mv98dx3236-corediv-clock";
@@ -208,11 +270,6 @@ dfx_coredivclk: corediv-clock@f8268 {
 				clocks = <&mainpll>;
 				clock-output-names = "nand";
 			};
-
-			dfx: dfx@0 {
-				compatible = "marvell,dfx-server";
-				reg = <0 0x100000>;
-			};
 		};
 
 		switch: switch@a8000000 {
@@ -229,6 +286,53 @@ pp0: packet-processor@0 {
 			};
 		};
 	};
+
+	clocks {
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
+
+&i2c0 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11000 0x100>;
+};
+
+&i2c1 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11100 0x100>;
+};
+
+&mpic {
+	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+};
+
+&timer {
+	compatible = "marvell,armada-xp-timer";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&watchdog {
+	compatible = "marvell,armada-xp-wdt";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&cpurst {
+	reg = <0x20800 0x20>;
+};
+
+&usb0 {
+	clocks = <&gateclk 18>;
+};
+
+&usb1 {
+	clocks = <&gateclk 19>;
 };
 
 &pinctrl {
@@ -241,14 +345,13 @@ spi0_pins: spi0-pins {
 	};
 };
 
-&sdio {
-	status = "disabled";
+&spi0 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
 };
 
-&crypto_sram0 {
+&sdio {
 	status = "disabled";
 };
 
-&crypto_sram1 {
-	status = "disabled";
-};

arch/arm/boot/dts/armada-xp-98dx3336.dtsi

@@ -49,7 +49,7 @@
 
 / {
 	model = "Marvell 98DX3336 SoC";
-	compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
 
 	cpus {
 		cpu@1 {

arch/arm/boot/dts/armada-xp-98dx4251.dtsi

@@ -49,7 +49,7 @@
 
 / {
 	model = "Marvell 98DX4251 SoC";
-	compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
 
 	cpus {
 		cpu@1 {

arch/arm/boot/dts/armada-xp-db-dxbc2.dts

@@ -58,7 +58,7 @@
 
 / {
 	model = "Marvell Bobcat2 Evaluation Board";
-	compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armada-370-xp";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";

arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts

@@ -58,7 +58,7 @@
 
 / {
 	model = "DB-XC3-24G4XG";
-	compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armada-370-xp";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";

arch/arm/boot/dts/armada-xp-linksys-mamba.dts

@@ -71,7 +71,8 @@ soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
 
 		internal-regs {
 
@@ -95,6 +96,9 @@ ethernet@70000 {
 				pinctrl-names = "default";
 				status = "okay";
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
@@ -106,6 +110,9 @@ ethernet@74000 {
 				pinctrl-names = "default";
 				status = "okay";
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
@@ -156,6 +163,7 @@ wlan_5g@3 {
 					esata@4 {
 						label = "mamba:white:esata";
 						reg = <0x4>;
+						linux,default-trigger = "disk-activity";
 					};
 
 					usb2@5 {
@@ -185,6 +193,10 @@ wps_amber@9 {
 				};
 			};
 
+			bm@c8000 {
+				status = "okay";
+			};
+
 			nand@d0000 {
 				status = "okay";
 				num-cs = <1>;
@@ -258,6 +270,10 @@ partition@180000 {
 				};
 			};
 		};
+
+		bm-bppi {
+			status = "okay";
+		};
 	};
 
 	gpio_keys {

arch/arm/boot/dts/aspeed-ast2500-evb.dts

@@ -20,6 +20,28 @@ memory {
 	};
 };
 
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+	};
+};
+
+&spi1 {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&spi2 {
+	status = "okay";
+};
+
 &uart5 {
 	status = "okay";
 };

arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts

@@ -31,6 +31,24 @@ vga_memory: framebuffer@5f000000 {
 	};
 };
 
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+	};
+};
+
+&spi {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
 &uart5 {
 	status = "okay";
 };

arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts

@@ -31,6 +31,42 @@ vga_memory: framebuffer@bf000000 {
 	};
 };
 
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
 &uart5 {
 	status = "okay";
 };

arch/arm/boot/dts/aspeed-g4.dtsi

@@ -18,21 +18,41 @@ cpu@0 {
 		};
 	};
 
-	clocks {
-		clk_clkin: clk_clkin {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
-		};
-
-	};
-
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 
+		fmc: flash-controller@1e620000 {
+			reg = < 0x1e620000 0x94
+				0x20000000 0x02000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2400-fmc";
+			status = "disabled";
+			interrupts = <19>;
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+		};
+
+		spi: flash-controller@1e630000 {
+			reg = < 0x1e630000 0x18
+				0x30000000 0x02000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2400-spi";
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+		};
+
 		vic: interrupt-controller@1e6c0080 {
 			compatible = "aspeed,ast2400-vic";
 			interrupt-controller;
@@ -61,16 +81,48 @@ apb {
 			#size-cells = <1>;
 			ranges;
 
-			clk_hpll: clk_hpll@1e6e2070 {
-				#clock-cells = <0>;
-				compatible = "aspeed,g4-hpll-clock";
-				reg = <0x1e6e2070 0x4>;
-				clocks = <&clk_clkin>;
-			};
-
 			syscon: syscon@1e6e2000 {
 				compatible = "aspeed,g4-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1a8>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+                                clk_clkin: clk_clkin {
+                                        #clock-cells = <0>;
+                                        compatible = "fixed-clock";
+                                        clock-frequency = <48000000>;
+                                };
+
+                                clk_hpll: clk_hpll@70 {
+                                        #clock-cells = <0>;
+                                        compatible = "aspeed,g4-hpll-clock", "fixed-clock";
+                                        reg = <0x70>;
+                                        clocks = <&clk_clkin>;
+                                        clock-frequency = <384000000>;
+                                };
+
+                                clk_ahb: clk_ahb@70 {
+                                        #clock-cells = <0>;
+                                        compatible = "aspeed,g4-ahb-clock", "fixed-clock";
+                                        reg = <0x70>;
+                                        clocks = <&clk_hpll>;
+                                        clock-frequency = <192000000>;
+                                };
+
+                                clk_apb: clk_apb@08 {
+                                        #clock-cells = <0>;
+                                        compatible = "aspeed,g4-apb-clock", "fixed-clock";
+                                        reg = <0x08>;
+                                        clocks = <&clk_hpll>;
+                                        clock-frequency = <48000000>;
+                                };
+
+                                clk_uart: clk_uart@2c{
+                                        #clock-cells = <0>;
+                                        compatible = "aspeed,g4-uart-clock", "fixed-clock";
+                                        reg = <0x2c>;
+                                        clock-frequency = <24000000>;
+                                };
 
 				pinctrl: pinctrl {
 					compatible = "aspeed,g4-pinctrl";
@@ -818,19 +870,6 @@ pinctrl_wdtrst2_default: wdtrst2_default {
 				};
 			};
 
-			clk_apb: clk_apb@1e6e2008 {
-				#clock-cells = <0>;
-				compatible = "aspeed,g4-apb-clock";
-				reg = <0x1e6e2008 0x4>;
-				clocks = <&clk_hpll>;
-			};
-
-			clk_uart: clk_uart@1e6e2008 {
-				#clock-cells = <0>;
-				compatible = "aspeed,uart-clock";
-				reg = <0x1e6e202c 0x4>;
-			};
-
 			sram@1e720000 {
 				compatible = "mmio-sram";
 				reg = <0x1e720000 0x8000>;	// 32K
@@ -857,13 +896,13 @@ timer: timer@1e782000 {
 			};
 
 			wdt1: wdt@1e785000 {
-				compatible = "aspeed,wdt";
+				compatible = "aspeed,ast2400-wdt";
 				reg = <0x1e785000 0x1c>;
 				interrupts = <27>;
 			};
 
 			wdt2: wdt@1e785020 {
-				compatible = "aspeed,wdt";
+				compatible = "aspeed,ast2400-wdt";
 				reg = <0x1e785020 0x1c>;
 				interrupts = <27>;
 				clocks = <&clk_apb>;
@@ -930,6 +969,14 @@ uart6: serial@1e787000 {
 				no-loopback-test;
 				status = "disabled";
 			};
+
+			adc: adc@1e6e9000 {
+				compatible = "aspeed,ast2400-adc";
+				reg = <0x1e6e9000 0xb0>;
+				clocks = <&clk_apb>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
 		};
 	};
 };

arch/arm/boot/dts/aspeed-g5.dtsi

@@ -24,6 +24,69 @@ ahb {
 		#size-cells = <1>;
 		ranges;
 
+		fmc: flash-controller@1e620000 {
+			reg = < 0x1e620000 0xc4
+				0x20000000 0x10000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-fmc";
+			status = "disabled";
+			interrupts = <19>;
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+		};
+
+		spi1: flash-controller@1e630000 {
+			reg = < 0x1e630000 0xc4
+				0x30000000 0x08000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-spi";
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+		};
+
+		spi2: flash-controller@1e631000 {
+			reg = < 0x1e631000 0xc4
+				0x38000000 0x08000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-spi";
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+		};
+
 		vic: interrupt-controller@1e6c0080 {
 			compatible = "aspeed,ast2400-vic";
 			interrupt-controller;
@@ -52,15 +115,49 @@ apb {
 			#size-cells = <1>;
 			ranges;
 
-			clk_clkin: clk_clkin@1e6e2070 {
-				#clock-cells = <0>;
-				compatible = "aspeed,g5-clkin-clock";
-				reg = <0x1e6e2070 0x04>;
-			};
-
 			syscon: syscon@1e6e2000 {
 				compatible = "aspeed,g5-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1a8>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				clk_clkin: clk_clkin@70 {
+					#clock-cells = <0>;
+					compatible = "aspeed,g5-clkin-clock", "fixed-clock";
+					reg = <0x70>;
+					clock-frequency = <24000000>;
+				};
+
+				clk_hpll: clk_hpll@24 {
+					#clock-cells = <0>;
+					compatible = "aspeed,g5-hpll-clock", "fixed-clock";
+					reg = <0x24>;
+					clocks = <&clk_clkin>;
+					clock-frequency = <792000000>;
+				};
+
+				clk_ahb: clk_ahb@70 {
+					#clock-cells = <0>;
+					compatible = "aspeed,g5-ahb-clock", "fixed-clock";
+					reg = <0x70>;
+					clocks = <&clk_hpll>;
+					clock-frequency = <198000000>;
+				};
+
+				clk_apb: clk_apb@08 {
+					#clock-cells = <0>;
+					compatible = "aspeed,g5-apb-clock", "fixed-clock";
+					reg = <0x08>;
+					clocks = <&clk_hpll>;
+					clock-frequency = <24750000>;
+				};
+
+				clk_uart: clk_uart@2c {
+					#clock-cells = <0>;
+					compatible = "aspeed,uart-clock", "fixed-clock";
+					reg = <0x2c>;
+					clock-frequency = <24000000>;
+				};
 
 				pinctrl: pinctrl {
 					compatible = "aspeed,g5-pinctrl";
@@ -285,7 +382,6 @@ pinctrl_lad0_default: lad0_default {
 						function = "LAD0";
 						groups = "LAD0";
 					};
-
 					pinctrl_lad1_default: lad1_default {
 						function = "LAD1";
 						groups = "LAD1";
@@ -872,33 +968,7 @@ pinctrl_wdtrst2_default: wdtrst2_default {
 					};
 
 				};
-			};
-
-			clk_hpll: clk_hpll@1e6e2024 {
-				#clock-cells = <0>;
-				compatible = "aspeed,g5-hpll-clock";
-				reg = <0x1e6e2024 0x4>;
-				clocks = <&clk_clkin>;
-			};
-
-			clk_ahb: clk_ahb@1e6e2070 {
-				#clock-cells = <0>;
-				compatible = "aspeed,g5-ahb-clock";
-				reg = <0x1e6e2070 0x4>;
-				clocks = <&clk_hpll>;
-			};
 
-			clk_apb: clk_apb@1e6e2008 {
-				#clock-cells = <0>;
-				compatible = "aspeed,g5-apb-clock";
-				reg = <0x1e6e2008 0x4>;
-				clocks = <&clk_hpll>;
-			};
-
-			clk_uart: clk_uart@1e6e2008 {
-				#clock-cells = <0>;
-				compatible = "aspeed,uart-clock";
-				reg = <0x1e6e202c 0x4>;
 			};
 
 			gfx: display@1e6e6000 {
@@ -934,21 +1004,21 @@ timer: timer@1e782000 {
 
 
 			wdt1: wdt@1e785000 {
-				compatible = "aspeed,wdt";
-				reg = <0x1e785000 0x1c>;
+				compatible = "aspeed,ast2500-wdt";
+				reg = <0x1e785000 0x20>;
 				interrupts = <27>;
 			};
 
 			wdt2: wdt@1e785020 {
-				compatible = "aspeed,wdt";
-				reg = <0x1e785020 0x1c>;
+				compatible = "aspeed,ast2500-wdt";
+				reg = <0x1e785020 0x20>;
 				interrupts = <27>;
 				status = "disabled";
 			};
 
 			wdt3: wdt@1e785040 {
-				compatible = "aspeed,wdt";
-				reg = <0x1e785074 0x1c>;
+				compatible = "aspeed,ast2500-wdt";
+				reg = <0x1e785040 0x20>;
 				status = "disabled";
 			};
 
@@ -1042,6 +1112,14 @@ uart6: serial@1e787000 {
 				no-loopback-test;
 				status = "disabled";
 			};
+
+			adc: adc@1e6e9000 {
+				compatible = "aspeed,ast2500-adc";
+				reg = <0x1e6e9000 0xb0>;
+				clocks = <&clk_apb>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
 		};
 	};
 };

arch/arm/boot/dts/at91-sama5d2_xplained.dts

@@ -246,6 +246,7 @@ uart5: serial@200 {
 
 			shdwc@f8048010 {
 				atmel,shdwc-debouncer = <976>;
+				atmel,wakeup-rtc-timer;
 
 				input@0 {
 					reg = <0>;

arch/arm/boot/dts/at91-sama5d3_xplained.dts

@@ -162,9 +162,10 @@ spi1: spi@f8008000 {
 			};
 
 			adc0: adc@f8018000 {
+				atmel,adc-vref = <3300>;
+				atmel,adc-channels-used = <0xfe>;
 				pinctrl-0 = <
 					&pinctrl_adc0_adtrg
-					&pinctrl_adc0_ad0
 					&pinctrl_adc0_ad1
 					&pinctrl_adc0_ad2
 					&pinctrl_adc0_ad3
@@ -172,8 +173,6 @@ &pinctrl_adc0_ad4
 					&pinctrl_adc0_ad5
 					&pinctrl_adc0_ad6
 					&pinctrl_adc0_ad7
-					&pinctrl_adc0_ad8
-					&pinctrl_adc0_ad9
 					>;
 				status = "okay";
 			};

arch/arm/boot/dts/at91-tse850-3.dts

@@ -86,16 +86,43 @@ dac: dpot-dac {
 		#io-channel-cells = <1>;
 	};
 
-	envelope-detector {
+	env_det: envelope-detector {
 		compatible = "axentia,tse850-envelope-detector";
 		io-channels = <&dac 0>;
 		io-channel-names = "dac";
+		#io-channel-cells = <1>;
 
 		interrupt-parent = <&pioA>;
 		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
 		interrupt-names = "comp";
 	};
 
+	mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+			    <&pioA 1 GPIO_ACTIVE_HIGH>,
+			    <&pioA 2 GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+	};
+
+	envelope-detector-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&env_det 0>;
+		io-channel-names = "parent";
+
+		mux-controls = <&mux>;
+
+		channels = "", "",
+			 "sync-1",
+			 "in",
+			 "out",
+			 "sync-2",
+			 "sys-reg",
+			 "ana-reg";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 

arch/arm/boot/dts/at91sam9261.dtsi

@@ -263,7 +263,7 @@ ramc: ramc@ffffea00 {
 			};
 
 			matrix: matrix@ffffee00 {
-				compatible = "atmel,at91sam9260-bus-matrix", "syscon";
+				compatible = "atmel,at91sam9261-matrix", "syscon";
 				reg = <0xffffee00 0x200>;
 			};
 

arch/arm/boot/dts/at91sam9x5ek.dtsi

@@ -116,7 +116,7 @@ pinctrl_board_usb2: usb2-board {
 			};
 
 			spi0: spi@f0000000 {
-				status = "okay";
+				status = "disabled"; /* conflicts with mmc1 */
 				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
 				m25p80@0 {
 					compatible = "atmel,at25df321a";

arch/arm/boot/dts/axp209.dtsi

@@ -53,6 +53,11 @@ &axp209 {
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
+	ac_power_supply: ac-power-supply {
+		compatible = "x-powers,axp202-ac-power-supply";
+		status = "disabled";
+	};
+
 	axp_gpio: gpio {
 		compatible = "x-powers,axp209-gpio";
 		gpio-controller;

arch/arm/boot/dts/axp22x.dtsi

@@ -52,6 +52,11 @@ &axp22x {
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
+	ac_power_supply: ac-power-supply {
+		compatible = "x-powers,axp221-ac-power-supply";
+		status = "disabled";
+	};
+
 	regulators {
 		/* Default work frequency for buck regulators */
 		x-powers,dcdc-freq = <3000>;

arch/arm/boot/dts/bcm-cygnus.dtsi

@@ -205,7 +205,7 @@ pcie0: pcie@18012000 {
 			status = "disabled";
 
 			msi-parent = <&msi0>;
-			msi0: msi@18012000 {
+			msi0: msi-controller {
 				compatible = "brcm,iproc-msi";
 				msi-controller;
 				interrupt-parent = <&gic>;
@@ -240,7 +240,7 @@ pcie1: pcie@18013000 {
 			status = "disabled";
 
 			msi-parent = <&msi1>;
-			msi1: msi@18013000 {
+			msi1: msi-controller {
 				compatible = "brcm,iproc-msi";
 				msi-controller;
 				interrupt-parent = <&gic>;

arch/arm/boot/dts/bcm-nsp.dtsi

@@ -245,6 +245,15 @@ amac2: ethernet@24000 {
 			status = "disabled";
 		};
 
+		mailbox: mailbox@25000 {
+			compatible = "brcm,iproc-fa2-mbox";
+			reg = <0x25000 0x445>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+		};
+
 		nand: nand@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x026000 0x600>,
@@ -288,6 +297,12 @@ qspi: qspi@27200 {
 			#size-cells = <0>;
 		};
 
+		crypto@2f000 {
+			compatible = "brcm,spum-nsp-crypto";
+			reg = <0x2f000 0x900>;
+			mboxes = <&mailbox 0>;
+		};
+
 		gpiob: gpio@30000 {
 			compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio";
 			reg = <0x30000 0x50>;
@@ -306,6 +321,20 @@ pwm: pwm@31000 {
 			status = "disabled";
 		};
 
+		ehci0: usb@2a000 {
+			compatible = "generic-ehci";
+			reg = <0x2a000 0x100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ohci0: usb@2b000 {
+			compatible = "generic-ohci";
+			reg = <0x2b000 0x100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		rng: rng@33000 {
 			compatible = "brcm,bcm-nsp-rng";
 			reg = <0x33000 0x14>;
@@ -347,6 +376,7 @@ i2c0: i2c@38000 {
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
 			clock-frequency = <100000>;
+			status = "disabled";
 		};
 
 		watchdog@39000 {
@@ -450,7 +480,7 @@ pcie0: pcie@18012000 {
 		status = "disabled";
 
 		msi-parent = <&msi0>;
-		msi0: msi@18012000 {
+		msi0: msi-controller {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -486,7 +516,7 @@ pcie1: pcie@18013000 {
 		status = "disabled";
 
 		msi-parent = <&msi1>;
-		msi1: msi@18013000 {
+		msi1: msi-controller {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -522,7 +552,7 @@ pcie2: pcie@18014000 {
 		status = "disabled";
 
 		msi-parent = <&msi2>;
-		msi2: msi@18014000 {
+		msi2: msi-controller {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;

arch/arm/boot/dts/bcm2835-rpi.dtsi

@@ -69,6 +69,12 @@ &sdhci {
 	bus-width = <4>;
 };
 
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
@@ -92,3 +98,11 @@ &vec {
 	power-domains = <&power RPI_POWER_DOMAIN_VEC>;
 	status = "okay";
 };
+
+&dsi0 {
+	power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
+};
+
+&dsi1 {
+	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
+};

arch/arm/boot/dts/bcm283x.dtsi

@@ -93,10 +93,13 @@ clocks: cprman@7e101000 {
 			#clock-cells = <1>;
 			reg = <0x7e101000 0x2000>;
 
-			/* CPRMAN derives everything from the platform's
-			 * oscillator.
+			/* CPRMAN derives almost everything from the
+			 * platform's oscillator.  However, the DSI
+			 * pixel clocks come from the DSI analog PHY.
 			 */
-			clocks = <&clk_osc>;
+			clocks = <&clk_osc>,
+				<&dsi0 0>, <&dsi0 1>, <&dsi0 2>,
+				<&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
 		};
 
 		rng@7e104000 {
@@ -347,6 +350,16 @@ uart0: serial@7e201000 {
 			arm,primecell-periphid = <0x00241011>;
 		};
 
+		sdhost: mmc@7e202000 {
+			compatible = "brcm,bcm2835-sdhost";
+			reg = <0x7e202000 0x100>;
+			interrupts = <2 24>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			dmas = <&dma 13>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
 		i2s: i2s@7e203000 {
 			compatible = "brcm,bcm2835-i2s";
 			reg = <0x7e203000 0x20>,
@@ -390,6 +403,25 @@ pixelvalve@7e207000 {
 			interrupts = <2 14>; /* pwa1 */
 		};
 
+		dsi0: dsi@7e209000 {
+			compatible = "brcm,bcm2835-dsi0";
+			reg = <0x7e209000 0x78>;
+			interrupts = <2 4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+
+			clocks = <&clocks BCM2835_PLLA_DSI0>,
+				 <&clocks BCM2835_CLOCK_DSI0E>,
+				 <&clocks BCM2835_CLOCK_DSI0P>;
+			clock-names = "phy", "escape", "pixel";
+
+			clock-output-names = "dsi0_byte",
+					     "dsi0_ddr2",
+					     "dsi0_ddr";
+
+		};
+
 		thermal: thermal@7e212000 {
 			compatible = "brcm,bcm2835-thermal";
 			reg = <0x7e212000 0x8>;
@@ -456,6 +488,26 @@ hvs@7e400000 {
 			interrupts = <2 1>;
 		};
 
+		dsi1: dsi@7e700000 {
+			compatible = "brcm,bcm2835-dsi1";
+			reg = <0x7e700000 0x8c>;
+			interrupts = <2 12>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+
+			clocks = <&clocks BCM2835_PLLD_DSI1>,
+				 <&clocks BCM2835_CLOCK_DSI1E>,
+				 <&clocks BCM2835_CLOCK_DSI1P>;
+			clock-names = "phy", "escape", "pixel";
+
+			clock-output-names = "dsi1_byte",
+					     "dsi1_ddr2",
+					     "dsi1_ddr";
+
+			status = "disabled";
+		};
+
 		i2c1: i2c@7e804000 {
 			compatible = "brcm,bcm2835-i2c";
 			reg = <0x7e804000 0x1000>;
@@ -499,6 +551,8 @@ hdmi: hdmi@7e902000 {
 			clocks = <&clocks BCM2835_PLLH_PIX>,
 				 <&clocks BCM2835_CLOCK_HSM>;
 			clock-names = "pixel", "hdmi";
+			dmas = <&dma 17>;
+			dma-names = "audio-rx";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts

@@ -4,7 +4,17 @@
  *
  * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
  *
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;
@@ -31,19 +41,16 @@ leds {
 		usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		power {
@@ -61,14 +68,12 @@ all {
 		2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 
 		usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 	};
 

arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts

@@ -4,7 +4,17 @@
  *
  * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
  *
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;
@@ -31,7 +41,6 @@ leds {
 		usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		power {
@@ -49,7 +58,6 @@ logo {
 		usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 	};
 

arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts

@@ -52,13 +52,11 @@ leds {
 		usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		power0 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		power1 {
@@ -76,7 +74,6 @@ router0 {
 		router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		wan {
@@ -88,13 +85,11 @@ wan {
 		wireless0 {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 	};
 

arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts

+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,ea6300-v1", "brcm,bcm4708";
+	model = "Linksys EA6300 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};

arch/arm/boot/dts/bcm4708-netgear-r6250.dts

@@ -43,19 +43,16 @@ power0 {
 		power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		wireless {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 	};
 

arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts

@@ -4,7 +4,17 @@
  *
  * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
  *
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;
@@ -37,7 +47,6 @@ logo {
 		power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		power1 {
@@ -49,13 +58,11 @@ power1 {
 		usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		wireless {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 	};
 

arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts

@@ -37,61 +37,51 @@ power-white {
 		power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		usb3-white {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		usb3-green {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		status-red {
 			label = "bcm53xx:red:status";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		status-green {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		status-blue {
 			label = "bcm53xx:blue:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		wan-red {
 			label = "bcm53xx:red:wan";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 	};
 

arch/arm/boot/dts/bcm4708.dtsi

@@ -12,6 +12,14 @@
 / {
 	compatible = "brcm,bcm4708";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts

@@ -4,7 +4,17 @@
  *
  * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
  *
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;
@@ -37,7 +47,6 @@ power {
 		usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		wan {
@@ -55,7 +64,6 @@ lan {
 		usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 	};
 

arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts

@@ -4,7 +4,17 @@
  *
  * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
  *
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;
@@ -58,7 +68,6 @@ power0 {
 		power1 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		router0 {
@@ -70,7 +79,6 @@ router0 {
 		router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		wan {
@@ -82,13 +90,11 @@ wan {
 		wireless0 {
 			label = "bcm53xx:green:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 	};
 

arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts

@@ -4,7 +4,17 @@
  *
  * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
  *
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts

+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+	compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708";
+	model = "TP-LINK Archer C5 V2";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan {
+			label = "bcm53xx:green:lan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb2-port1 {
+			label = "bcm53xx:green:usb2-port1";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		wan-green {
+			label = "bcm53xx:green:wan";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		wps {
+			label = "bcm53xx:green:wps";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb2-port2 {
+			label = "bcm53xx:green:usb2-port2";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};

arch/arm/boot/dts/bcm47081.dtsi

@@ -4,7 +4,17 @@
  *
  * Copyright © 2014 Rafał Miłecki <zajec5@gmail.com>
  *
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
  */
 
 #include "bcm5301x.dtsi"
@@ -12,6 +22,14 @@
 / {
 	compatible = "brcm,bcm47081";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts

@@ -4,7 +4,17 @@
  *
  * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
  *
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;
@@ -31,7 +41,6 @@ leds {
 		wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		power {
@@ -43,7 +52,6 @@ power {
 		wan {
 			label = "bcm53xx:red:wan";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 	};
 

arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts

@@ -31,13 +31,11 @@ leds {
 		usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		power-white {
@@ -49,37 +47,31 @@ power-white {
 		router-amber {
 			label = "bcm53xx:amber:router";
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		router-white {
 			label = "bcm53xx:white:router";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		wireless-amber {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		wireless-white {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 	};
 

arch/arm/boot/dts/bcm4709-linksys-ea9200.dts

+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Linksys EA9200";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x08000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};

arch/arm/boot/dts/bcm4709-netgear-r7000.dts

@@ -4,7 +4,17 @@
  *
  * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
  *
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;
@@ -37,43 +47,36 @@ power-white {
 		power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		5ghz {
 			label = "bcm53xx:white:5ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		wireless {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 	};
 

arch/arm/boot/dts/bcm4709-netgear-r8000.dts

@@ -4,7 +4,17 @@
  *
  * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
  *
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;
@@ -28,58 +38,61 @@ memory {
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
+		};
+
+		wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
 		5ghz-1 {
 			label = "bcm53xx:white:5ghz-1";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		wireless {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		5ghz-2 {
 			label = "bcm53xx:white:5ghz-2";
 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 	};
 
@@ -105,6 +118,12 @@ restart {
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
+
+		brightness {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
 	};
 };
 

arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts

@@ -26,49 +26,41 @@ leds {
 		lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		wan-blue {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		power {

arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts

@@ -4,7 +4,17 @@
  *
  * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
  *
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;
@@ -46,37 +56,31 @@ power-white {
 		wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		usb3-white {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		5ghz {
 			label = "bcm53xx:white:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 	};
 

arch/arm/boot/dts/bcm47094-linksys-panamera.dts

+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Linksys EA9500";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x08000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};

arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts

@@ -34,37 +34,31 @@ power	{
 		lan3	{
 			label = "bcm53xx:green:lan3";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		lan4	{
 			label = "bcm53xx:green:lan4";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		wan	{
 			label = "bcm53xx:green:wan";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		lan1	{
 			label = "bcm53xx:green:lan1";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		lan2	{
 			label = "bcm53xx:green:lan2";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		usb3	{
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		status	{
@@ -76,13 +70,11 @@ status	{
 		2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 	};
 

arch/arm/boot/dts/bcm47094-netgear-r8500.dts

@@ -34,37 +34,31 @@ power0 {
 		power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		5ghz-1 {
 			label = "bcm53xx:white:5ghz-1";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		5ghz-2 {
 			label = "bcm53xx:white:5ghz-2";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 	};
 

arch/arm/boot/dts/bcm47189-tenda-ac9.dts

@@ -26,19 +26,16 @@ leds {
 		usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		system {
@@ -48,6 +45,15 @@ system {
 		};
 	};
 
+	pcie0_leds {
+		compatible = "gpio-leds";
+
+		2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
@@ -72,3 +78,30 @@ wps {
 		};
 	};
 };
+
+&pcie0 {
+	ranges = <0x00000000 0 0 0 0 0x00100000>;
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			reg = <0x0000 0 0 0 0>;
+			ranges = <0x00000000 0 0 0 0x00100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pcie0_chipcommon: chipcommon@0 {
+				reg = <0 0x1000>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/bcm5301x.dtsi

@@ -18,10 +18,6 @@
 / {
 	interrupt-parent = <&gic>;
 
-	chosen {
-		stdout-path = &uart0;
-	};
-
 	chipcommonA {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x18000000 0x00001000>;
@@ -70,10 +66,19 @@ timer@20200 {
 			clocks = <&periph_clk>;
 		};
 
-		local-timer@20600 {
+		timer@20600 {
 			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x20600 0x100>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
+			reg = <0x20600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		watchdog@20620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x20620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&periph_clk>;
 		};
 
@@ -298,20 +303,6 @@ xhci: xhci@23000 {
 			};
 		};
 
-		spi@29000 {
-			reg = <0x00029000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			spi_nor: spi-nor@0 {
-				compatible = "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				linux,part-probe = "ofpart", "bcm47xxpart";
-				status = "disabled";
-			};
-		};
-
 		gmac0: ethernet@24000 {
 			reg = <0x24000 0x800>;
 		};
@@ -329,6 +320,16 @@ gmac3: ethernet@27000 {
 		};
 	};
 
+	i2c0: i2c@18009000 {
+		compatible = "brcm,iproc-i2c";
+		reg = <0x18009000 0x50>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_NONE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
 	lcpll0: lcpll0@1800c100 {
 		#clock-cells = <1>;
 		compatible = "brcm,nsp-lcpll0";
@@ -375,4 +376,40 @@ nand: nand@18028000 {
 
 		brcm,nand-has-wp;
 	};
+
+	spi@18029200 {
+		compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+		reg = <0x18029200 0x184>,
+		      <0x18029000 0x124>,
+		      <0x1811b408 0x004>,
+		      <0x180293a0 0x01c>;
+		reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "spi_lr_fullness_reached",
+				  "spi_lr_session_aborted",
+				  "spi_lr_impatient",
+				  "spi_lr_session_done",
+				  "spi_lr_overhead",
+				  "mspi_done",
+				  "mspi_halted";
+		clocks = <&iprocmed>;
+		clock-names = "iprocmed";
+		num-cs = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		spi_nor: spi-nor@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+			linux,part-probe = "ofpart", "bcm47xxpart";
+			status = "disabled";
+		};
+	};
 };

arch/arm/boot/dts/bcm53573.dtsi

@@ -13,8 +13,12 @@
 / {
 	interrupt-parent = <&gic>;
 
+	aliases {
+		serial0 = &uart0;
+	};
+
 	chosen {
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	cpus {
@@ -113,6 +117,10 @@ uart0: serial@0300 {
 			};
 		};
 
+		pcie0: pcie@2000 {
+			reg = <0x00002000 0x1000>;
+		};
+
 		usb2: usb2@4000 {
 			reg = <0x4000 0x1000>;
 			ranges;

arch/arm/boot/dts/bcm94708.dts

@@ -38,14 +38,6 @@ / {
 	model = "NorthStar SVK (BCM94708)";
 	compatible = "brcm,bcm94708", "brcm,bcm4708";
 
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	memory {
 		reg = <0x00000000 0x08000000>;
 	};

arch/arm/boot/dts/bcm94709.dts

@@ -38,14 +38,6 @@ / {
 	model = "NorthStar SVK (BCM94709)";
 	compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
 
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	memory {
 		reg = <0x00000000 0x08000000>;
 	};

arch/arm/boot/dts/bcm953012er.dts

@@ -39,14 +39,6 @@ / {
 	model = "NorthStar Enterprise Router (BCM953012ER)";
 	compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
 
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	memory {
 		reg = <0x00000000 0x8000000>;
 	};

arch/arm/boot/dts/bcm953012hr.dts

+/*
+ *  SPDX-License-Identifier: BSD-3-Clause
+ *
+ *  Copyright(c) 2017 Broadcom
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its contributors
+ *      may be used to endorse or promote products derived from this
+ *      software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	model = "NorthStar HR (BCM953012HR)";
+	compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&nandcs {
+	partition@0 {
+		label = "nboot";
+		reg = <0x00000000 0x00200000>;
+		read-only;
+	};
+	partition@200000 {
+		label = "nenv";
+		reg = <0x00200000 0x00400000>;
+	};
+	partition@600000 {
+		label = "nsystem";
+		reg = <0x00600000 0x00a00000>;
+	};
+	partition@1000000 {
+		label = "nrootfs";
+		reg = <0x01000000 0x07000000>;
+	};
+};
+
+&spi_nor {
+	status = "okay";
+	spi-max-frequency = <62500000>;
+	m25p,default-addr-width = <3>;
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	partition@0 {
+		label = "boot";
+		reg = <0x00000000 0x000d0000>;
+	};
+	partition@d000 {
+		label = "env";
+		reg = <0x000d0000 0x00030000>;
+	};
+	partition@100000 {
+		label = "system";
+		reg = <0x00100000 0x00600000>;
+	};
+	partition@700000 {
+		label = "rootfs";
+		reg = <0x00700000 0x00900000>;
+	};
+};

arch/arm/boot/dts/bcm953012k.dts

@@ -43,15 +43,69 @@ aliases {
 		serial1 = &uart1;
 	};
 
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	memory {
 		reg = <0x80000000 0x10000000>;
 	};
 };
 
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x07000000>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+	spi-max-frequency = <62500000>;
+	m25p,default-addr-width = <3>;
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	partition@0 {
+		label = "boot";
+		reg = <0x00000000 0x000d0000>;
+	};
+	partition@d000 {
+		label = "env";
+		reg = <0x000d0000 0x00030000>;
+	};
+	partition@100000 {
+		label = "system";
+		reg = <0x00100000 0x00600000>;
+	};
+	partition@700000 {
+		label = "rootfs";
+		reg = <0x00700000 0x00900000>;
+	};
+};
+
 &uart0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958522er.dts

@@ -60,7 +60,7 @@ gpio-restart {
 	};
 };
 
-/* USB 2/3 support needed to be complete */
+/* USB 3 support needed to be complete */
 
 &amac0 {
 	status = "okay";
@@ -70,6 +70,10 @@ &amac1 {
 	status = "okay";
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &nand {
 	nandcs@0 {
 		compatible = "brcm,nandcs";
@@ -108,6 +112,10 @@ partition@4000000 {
 	};
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958525er.dts

@@ -60,7 +60,7 @@ gpio-restart {
 	};
 };
 
-/* USB 2/3 support needed to be complete */
+/* USB 3 support needed to be complete */
 
 &amac0 {
 	status = "okay";
@@ -70,6 +70,10 @@ &amac1 {
 	status = "okay";
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &nand {
 	nandcs@0 {
 		compatible = "brcm,nandcs";
@@ -108,6 +112,10 @@ partition@4000000 {
 	};
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958525xmc.dts

@@ -66,7 +66,13 @@ &amac0 {
 	status = "okay";
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &i2c0 {
+	status = "okay";
+
 	temperature-sensor@4c {
 		compatible = "adi,adt7461a";
 		reg = <0x4c>;
@@ -122,6 +128,10 @@ partition@4000000 {
 	};
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958622hr.dts

@@ -60,7 +60,7 @@ gpio-restart {
 	};
 };
 
-/* USB 2/3 and SLIC support needed to be complete */
+/* USB 3 and SLIC support needed to be complete */
 
 &amac0 {
 	status = "okay";
@@ -74,6 +74,10 @@ &amac2 {
 	status = "okay";
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &nand {
 	nandcs@0 {
 		compatible = "brcm,nandcs";
@@ -112,6 +116,10 @@ partition@4000000 {
 	};
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958623hr.dts

@@ -60,7 +60,7 @@ gpio-restart {
 	};
 };
 
-/* USB 2/3 and SLIC support needed to be complete */
+/* USB 3 and SLIC support needed to be complete */
 
 &amac0 {
 	status = "okay";
@@ -74,6 +74,10 @@ &amac2 {
 	status = "okay";
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &nand {
 	nandcs@0 {
 		compatible = "brcm,nandcs";
@@ -112,6 +116,10 @@ partition@4000000 {
 	};
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958625hr.dts

@@ -72,6 +72,10 @@ &amac2 {
 	status = "okay";
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &nand {
 	nandcs@0 {
 		compatible = "brcm,nandcs";
@@ -110,6 +114,10 @@ partition@4000000 {
 	};
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958625k.dts

@@ -65,6 +65,10 @@ &amac2 {
 	status = "okay";
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &nand {
 	nandcs@0 {
 		compatible = "brcm,nandcs";
@@ -103,6 +107,10 @@ partition@4000000 {
 	};
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm988312hr.dts

@@ -60,7 +60,7 @@ gpio-restart {
 	};
 };
 
-/* USB 2/3 support needed to be complete */
+/* USB 3 support needed to be complete */
 
 &amac0 {
 	status = "okay";
@@ -74,6 +74,10 @@ &amac2 {
 	status = "okay";
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &nand {
 	nandcs@0 {
 		compatible = "brcm,nandcs";
@@ -112,6 +116,10 @@ partition@4000000 {
 	};
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };

arch/arm/boot/dts/da850-evm.dts

@@ -9,6 +9,7 @@
  */
 /dts-v1/;
 #include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	compatible = "ti,da850-evm", "ti,da850";
@@ -78,7 +79,10 @@ tlv320aic3106: tlv320aic3106@18 {
 				DRVDD-supply = <&vbat>;
 				DVDD-supply = <&vbat>;
 			};
-
+			tca6416: gpio@20 {
+				compatible = "ti,tca6416";
+				reg = <0x20>;
+			};
 		};
 		wdt: wdt@21000 {
 			status = "okay";
@@ -293,20 +297,27 @@ nand@2000000,0 {
 
 &vpif {
 	pinctrl-names = "default";
-	pinctrl-0 = <&vpif_capture_pins>;
+	pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
 	status = "okay";
 
 	/* VPIF capture port */
-	port {
-		vpif_ch0: endpoint@0 {
-			  reg = <0>;
-			  bus-width = <8>;
+	port@0 {
+		vpif_input_ch0: endpoint@0 {
+			reg = <0>;
+			bus-width = <8>;
 		};
 
-		vpif_ch1: endpoint@1 {
-			  reg = <1>;
-			  bus-width = <8>;
-			  data-shift = <8>;
+		vpif_input_ch1: endpoint@1 {
+			reg = <1>;
+			bus-width = <8>;
+			data-shift = <8>;
+		};
+	};
+
+	/* VPIF display port */
+	port@1 {
+		vpif_output_ch0: endpoint {
+			bus-width = <8>;
 		};
 	};
 };

arch/arm/boot/dts/da850-lego-ev3.dts

@@ -123,6 +123,14 @@ gpio-poweroff {
 		pinctrl-0 = <&system_power_pin>;
 	};
 
+	sound {
+		compatible = "pwm-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ehrpwm0b_pins>;
+		pwms = <&ehrpwm0 1 1000000 0>;
+		amp-supply = <&amp>;
+	};
+
 	/*
 	 * This is a 5V current limiting regulator that is shared by USB,
 	 * the sensor (input) ports, the motor (output) ports and the A/DC.
@@ -139,18 +147,36 @@ vcc5v: regulator1 {
 		enable-active-high;
 		regulator-boot-on;
 	};
+
+	/*
+	 * This is a simple voltage divider on VCC5V to provide a 2.5V
+	 * reference signal to the ADC.
+	 */
+	adc_ref: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "adc ref";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		vin-supply = <&vcc5v>;
+	};
+
+	/*
+	 * This is the amplifier for the speaker.
+	 */
+	amp: regulator3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&amp_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "amp";
+		gpio = <&gpio 111 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &pmx_core {
 	status = "okay";
 
-	spi0_cs3_pin: pinmux_spi0_cs3_pin {
-		pinctrl-single,bits = <
-			/* CS3 */
-			0xc 0x01000000 0x0f000000
-		>;
-	};
-
 	mmc0_cd_pin: pinmux_mmc0_cd {
 		pinctrl-single,bits = <
 			/* GP5[14] */
@@ -195,6 +221,13 @@ vcc5v_pins: pinmux_vcc5v {
 			0x4c 0x00008000 0x0000f000
 		>;
 	};
+
+	amp_pins: pinmux_amp_pins {
+		pinctrl-single,bits = <
+			/* GP6[15] */
+			0x34 0x00000008 0x0000000f
+		>;
+	};
 };
 
 &pinconf {
@@ -293,6 +326,18 @@ partition@cb0000 {
 			};
 		};
 	};
+
+	adc: adc@3 {
+		compatible = "ti,ads7957";
+		reg = <3>;
+		#io-channel-cells = <1>;
+		spi-max-frequency = <10000000>;
+		vref-supply = <&adc_ref>;
+	};
+};
+
+&ehrpwm0 {
+	status = "okay";
 };
 
 &gpio {

arch/arm/boot/dts/da850.dtsi

@@ -153,6 +153,12 @@ spi0_cs0_pin: pinmux_spi0_cs0 {
 					0x10 0x00000010 0x000000f0
 				>;
 			};
+			spi0_cs3_pin: pinmux_spi0_cs3_pin {
+				pinctrl-single,bits = <
+					/* CS3 */
+					0xc 0x01000000 0x0f000000
+				>;
+			};
 			spi1_pins: pinmux_spi1_pins {
 				pinctrl-single,bits = <
 					/* SIMO, SOMI, CLK */
@@ -216,8 +222,21 @@ vpif_capture_pins: vpif_capture_pins {
 					0x3c 0x11111111 0xffffffff
 					/* VP_DIN[8..9] */
 					0x40 0x00000011 0x000000ff
-					/* VP_CLKIN3, VP_CLKIN2 */
-					0x4c 0x00010100 0x000f0f00
+				>;
+			};
+			vpif_display_pins: vpif_display_pins {
+				pinctrl-single,bits = <
+					/* VP_DOUT[2..7] */
+					0x40 0x11111100 0xffffff00
+					/* VP_DOUT[10..15,0..1] */
+					0x44 0x11111111 0xffffffff
+					/*  VP_DOUT[8..9] */
+					0x48 0x00000011 0x000000ff
+					/*
+					 * VP_CLKOUT3, VP_CLKIN3,
+					 * VP_CLKOUT2, VP_CLKIN2
+					 */
+					0x4c 0x00111100 0x00ffff00
 				>;
 			};
 		};
@@ -345,7 +364,13 @@ vpif: video@217000 {
 			status = "disabled";
 
 			/* VPIF capture port */
-			port {
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			/* VPIF display port */
+			port@1 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};