[PATCH] ide: use msleep() instead of ide_delay_50ms()

msleep() does msecs to jiffies conversion correctly regardless
of HZ value and sets the current task's state in a safe way.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/ide/ide-iops.c

@@ -767,7 +767,7 @@ int ide_driveid_update (ide_drive_t *drive)
 	SELECT_MASK(drive, 1);
 	if (IDE_CONTROL_REG)
 		hwif->OUTB(drive->ctl,IDE_CONTROL_REG);
-	ide_delay_50ms();
+	msleep(50);
 	hwif->OUTB(WIN_IDENTIFY, IDE_COMMAND_REG);
 	timeout = jiffies + WAIT_WORSTCASE;
 	do {
@@ -775,9 +775,9 @@ int ide_driveid_update (ide_drive_t *drive)
 			SELECT_MASK(drive, 0);
 			return 0;	/* drive timed-out */
 		}
-		ide_delay_50ms();	/* give drive a breather */
+		msleep(50);	/* give drive a breather */
 	} while (hwif->INB(IDE_ALTSTATUS_REG) & BUSY_STAT);
-	ide_delay_50ms();	/* wait for IRQ and DRQ_STAT */
+	msleep(50);	/* wait for IRQ and DRQ_STAT */
 	if (!OK_STAT(hwif->INB(IDE_STATUS_REG),DRQ_STAT,BAD_R_STAT)) {
 		SELECT_MASK(drive, 0);
 		printk("%s: CHECK for good STATUS\n", drive->name);
@@ -827,7 +827,7 @@ int ide_config_drive_speed (ide_drive_t *drive, u8 speed)
 	u8 stat;
 
 //	while (HWGROUP(drive)->busy)
-//		ide_delay_50ms();
+//		msleep(50);
 
 #ifdef CONFIG_BLK_DEV_IDEDMA
 	if (hwif->ide_dma_check)	 /* check if host supports DMA */

drivers/ide/ide-probe.c

@@ -283,9 +283,10 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
 	unsigned long timeout;
 	u8 s = 0, a = 0;
 
+	/* take a deep breath */
+	msleep(50);
+
 	if (IDE_CONTROL_REG) {
-		/* take a deep breath */
-		ide_delay_50ms();
 		a = hwif->INB(IDE_ALTSTATUS_REG);
 		s = hwif->INB(IDE_STATUS_REG);
 		if ((a ^ s) & ~INDEX_STAT) {
@@ -297,10 +298,8 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
 			/* use non-intrusive polling */
 			hd_status = IDE_ALTSTATUS_REG;
 		}
-	} else {
-		ide_delay_50ms();
+	} else
 		hd_status = IDE_STATUS_REG;
-	}
 
 	/* set features register for atapi
 	 * identify command to be sure of reply
@@ -324,11 +323,11 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
 			return 1;
 		}
 		/* give drive a breather */
-		ide_delay_50ms();
+		msleep(50);
 	} while ((hwif->INB(hd_status)) & BUSY_STAT);
 
 	/* wait for IRQ and DRQ_STAT */
-	ide_delay_50ms();
+	msleep(50);
 	if (OK_STAT((hwif->INB(IDE_STATUS_REG)), DRQ_STAT, BAD_R_STAT)) {
 		unsigned long flags;
 
@@ -457,15 +456,15 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 	/* needed for some systems
 	 * (e.g. crw9624 as drive0 with disk as slave)
 	 */
-	ide_delay_50ms();
+	msleep(50);
 	SELECT_DRIVE(drive);
-	ide_delay_50ms();
+	msleep(50);
 	if (hwif->INB(IDE_SELECT_REG) != drive->select.all && !drive->present) {
 		if (drive->select.b.unit != 0) {
 			/* exit with drive0 selected */
 			SELECT_DRIVE(&hwif->drives[0]);
 			/* allow BUSY_STAT to assert & clear */
-			ide_delay_50ms();
+			msleep(50);
 		}
 		/* no i/f present: mmm.. this should be a 4 -ml */
 		return 3;
@@ -488,14 +487,14 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 			printk("%s: no response (status = 0x%02x), "
 				"resetting drive\n", drive->name,
 				hwif->INB(IDE_STATUS_REG));
-			ide_delay_50ms();
+			msleep(50);
 			hwif->OUTB(drive->select.all, IDE_SELECT_REG);
-			ide_delay_50ms();
+			msleep(50);
 			hwif->OUTB(WIN_SRST, IDE_COMMAND_REG);
 			timeout = jiffies;
 			while (((hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) &&
 			       time_before(jiffies, timeout + WAIT_WORSTCASE))
-				ide_delay_50ms();
+				msleep(50);
 			rc = try_to_identify(drive, cmd);
 		}
 		if (rc == 1)
@@ -510,7 +509,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 	if (drive->select.b.unit != 0) {
 		/* exit with drive0 selected */
 		SELECT_DRIVE(&hwif->drives[0]);
-		ide_delay_50ms();
+		msleep(50);
 		/* ensure drive irq is clear */
 		(void) hwif->INB(IDE_STATUS_REG);
 	}
@@ -527,7 +526,7 @@ static void enable_nest (ide_drive_t *drive)
 
 	printk("%s: enabling %s -- ", hwif->name, drive->id->model);
 	SELECT_DRIVE(drive);
-	ide_delay_50ms();
+	msleep(50);
 	hwif->OUTB(EXABYTE_ENABLE_NEST, IDE_COMMAND_REG);
 	timeout = jiffies + WAIT_WORSTCASE;
 	do {
@@ -535,10 +534,10 @@ static void enable_nest (ide_drive_t *drive)
 			printk("failed (timeout)\n");
 			return;
 		}
-		ide_delay_50ms();
+		msleep(50);
 	} while ((hwif->INB(IDE_STATUS_REG)) & BUSY_STAT);
 
-	ide_delay_50ms();
+	msleep(50);
 
 	if (!OK_STAT((hwif->INB(IDE_STATUS_REG)), 0, BAD_STAT)) {
 		printk("failed (status = 0x%02x)\n", hwif->INB(IDE_STATUS_REG));
@@ -781,7 +780,7 @@ void probe_hwif (ide_hwif_t *hwif)
 		udelay(10);
 		hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
 		do {
-			ide_delay_50ms();
+			msleep(50);
 			stat = hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]);
 		} while ((stat & BUSY_STAT) && time_after(timeout, jiffies));
 

drivers/ide/ide.c

@@ -1387,22 +1387,6 @@ void ide_add_generic_settings (ide_drive_t *drive)
 		ide_add_setting(drive,	"ide-scsi",		SETTING_RW,					-1,		HDIO_SET_IDE_SCSI,		TYPE_BYTE,	0,	1,				1,		1,		&drive->scsi,			ide_atapi_to_scsi);
 }
 
-/*
- * Delay for *at least* 50ms.  As we don't know how much time is left
- * until the next tick occurs, we wait an extra tick to be safe.
- * This is used only during the probing/polling for drives at boot time.
- *
- * However, its usefullness may be needed in other places, thus we export it now.
- * The future may change this to a millisecond setable delay.
- */
-void ide_delay_50ms (void)
-{
-	__set_current_state(TASK_UNINTERRUPTIBLE);
-	schedule_timeout(1+HZ/20);
-}
-
-EXPORT_SYMBOL(ide_delay_50ms);
-
 int system_bus_clock (void)
 {
 	return((int) ((!system_bus_speed) ? ide_system_bus_speed() : system_bus_speed ));

drivers/ide/legacy/pdc4030.c

@@ -282,8 +282,8 @@ int __init detect_pdc4030(ide_hwif_t *hwif)
 	hwif->OUTB(0xF3, IDE_SECTOR_REG);
 	hwif->OUTB(0x14, IDE_SELECT_REG);
 	hwif->OUTB(PROMISE_EXTENDED_COMMAND, IDE_COMMAND_REG);
-	
-	ide_delay_50ms();
+
+	msleep(50);
 
 	if (hwif->INB(IDE_ERROR_REG) == 'P' &&
 	    hwif->INB(IDE_NSECTOR_REG) == 'T' &&

include/linux/ide.h

@@ -1477,7 +1477,6 @@ int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long);
 int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long);
 int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long);
 
-extern void ide_delay_50ms(void);
 extern int system_bus_clock(void);
 
 extern u8 ide_auto_reduce_xfer(ide_drive_t *);