Commit 872aba51 authored by Lad, Prabhakar's avatar Lad, Prabhakar Committed by Mauro Carvalho Chehab

[media] omap3isp: Rename the variable names in description

This patch renames the variable in the description to match it
appropriately to function definition.
Signed-off-by: default avatarLad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: default avatarMauro Carvalho Chehab <m.chehab@samsung.com>
parent fdf7bbe2
......@@ -265,7 +265,7 @@ void omap3isp_unregister_entities(struct platform_device *pdev);
/*
* isp_reg_readl - Read value of an OMAP3 ISP register
* @dev: Device pointer specific to the OMAP3 ISP.
* @isp: Device pointer specific to the OMAP3 ISP.
* @isp_mmio_range: Range to which the register offset refers to.
* @reg_offset: Register offset to read from.
*
......@@ -280,7 +280,7 @@ u32 isp_reg_readl(struct isp_device *isp, enum isp_mem_resources isp_mmio_range,
/*
* isp_reg_writel - Write value to an OMAP3 ISP register
* @dev: Device pointer specific to the OMAP3 ISP.
* @isp: Device pointer specific to the OMAP3 ISP.
* @reg_value: 32 bit value to write to the register.
* @isp_mmio_range: Range to which the register offset refers to.
* @reg_offset: Register offset to write into.
......@@ -293,8 +293,8 @@ void isp_reg_writel(struct isp_device *isp, u32 reg_value,
}
/*
* isp_reg_and - Clear individual bits in an OMAP3 ISP register
* @dev: Device pointer specific to the OMAP3 ISP.
* isp_reg_clr - Clear individual bits in an OMAP3 ISP register
* @isp: Device pointer specific to the OMAP3 ISP.
* @mmio_range: Range to which the register offset refers to.
* @reg: Register offset to work on.
* @clr_bits: 32 bit value which would be cleared in the register.
......@@ -310,7 +310,7 @@ void isp_reg_clr(struct isp_device *isp, enum isp_mem_resources mmio_range,
/*
* isp_reg_set - Set individual bits in an OMAP3 ISP register
* @dev: Device pointer specific to the OMAP3 ISP.
* @isp: Device pointer specific to the OMAP3 ISP.
* @mmio_range: Range to which the register offset refers to.
* @reg: Register offset to work on.
* @set_bits: 32 bit value which would be set in the register.
......@@ -326,7 +326,7 @@ void isp_reg_set(struct isp_device *isp, enum isp_mem_resources mmio_range,
/*
* isp_reg_clr_set - Clear and set invidial bits in an OMAP3 ISP register
* @dev: Device pointer specific to the OMAP3 ISP.
* @isp: Device pointer specific to the OMAP3 ISP.
* @mmio_range: Range to which the register offset refers to.
* @reg: Register offset to work on.
* @clr_bits: 32 bit value which would be cleared in the register.
......
......@@ -674,7 +674,7 @@ static void ccdc_config_imgattr(struct isp_ccdc_device *ccdc, u32 colptn)
/*
* ccdc_config - Set CCDC configuration from userspace
* @ccdc: Pointer to ISP CCDC device.
* @userspace_add: Structure containing CCDC configuration sent from userspace.
* @ccdc_struct: Structure containing CCDC configuration sent from userspace.
*
* Returns 0 if successful, -EINVAL if the pointer to the configuration
* structure is null, or the copy_from_user function fails to copy user space
......@@ -793,7 +793,7 @@ static void ccdc_apply_controls(struct isp_ccdc_device *ccdc)
/*
* omap3isp_ccdc_restore_context - Restore values of the CCDC module registers
* @dev: Pointer to ISP device
* @isp: Pointer to ISP device
*/
void omap3isp_ccdc_restore_context(struct isp_device *isp)
{
......@@ -2525,7 +2525,7 @@ static int ccdc_init_entities(struct isp_ccdc_device *ccdc)
/*
* omap3isp_ccdc_init - CCDC module initialization.
* @dev: Device pointer specific to the OMAP3 ISP.
* @isp: Device pointer specific to the OMAP3 ISP.
*
* TODO: Get the initialisation values from platform data.
*
......@@ -2564,7 +2564,7 @@ int omap3isp_ccdc_init(struct isp_device *isp)
/*
* omap3isp_ccdc_cleanup - CCDC module cleanup.
* @dev: Device pointer specific to the OMAP3 ISP.
* @isp: Device pointer specific to the OMAP3 ISP.
*/
void omap3isp_ccdc_cleanup(struct isp_device *isp)
{
......
......@@ -211,7 +211,7 @@ static void ccp2_mem_enable(struct isp_ccp2_device *ccp2, u8 enable)
/*
* ccp2_phyif_config - Initialize CCP2 phy interface config
* @ccp2: Pointer to ISP CCP2 device
* @config: CCP2 platform data
* @pdata: CCP2 platform data
*
* Configure the CCP2 physical interface module from platform data.
*
......
......@@ -299,7 +299,7 @@ static u32 hist_get_buf_size(struct omap3isp_hist_config *conf)
/*
* hist_validate_params - Helper function to check user given params.
* @user_cfg: Pointer to user configuration structure.
* @new_conf: Pointer to user configuration structure.
*
* Returns 0 on success configuration.
*/
......
......@@ -971,7 +971,8 @@ static void preview_setup_hw(struct isp_prev_device *prev, u32 update,
/*
* preview_config_ycpos - Configure byte layout of YUV image.
* @mode: Indicates the required byte layout.
* @prev: pointer to previewer private structure
* @pixelcode: pixel code
*/
static void
preview_config_ycpos(struct isp_prev_device *prev,
......@@ -1373,7 +1374,7 @@ static void preview_init_params(struct isp_prev_device *prev)
/*
* preview_max_out_width - Handle previewer hardware output limitations
* @isp_revision : ISP revision
* @prev: pointer to previewer private structure
* returns maximum width output for current isp revision
*/
static unsigned int preview_max_out_width(struct isp_prev_device *prev)
......@@ -1619,7 +1620,7 @@ static const struct v4l2_ctrl_ops preview_ctrl_ops = {
/*
* preview_ioctl - Handle preview module private ioctl's
* @prev: pointer to preview context structure
* @sd: pointer to v4l2 subdev structure
* @cmd: configuration command
* @arg: configuration argument
* return -EINVAL or zero on success
......@@ -2350,7 +2351,7 @@ static int preview_init_entities(struct isp_prev_device *prev)
/*
* omap3isp_preview_init - Previewer initialization.
* @dev : Pointer to ISP device
* @isp : Pointer to ISP device
* return -ENOMEM or zero on success
*/
int omap3isp_preview_init(struct isp_device *isp)
......
......@@ -206,7 +206,7 @@ static void resizer_set_bilinear(struct isp_res_device *res,
/*
* resizer_set_ycpos - Luminance and chrominance order
* @res: Device context.
* @order: order type.
* @pixelcode: pixel code.
*/
static void resizer_set_ycpos(struct isp_res_device *res,
enum v4l2_mbus_pixelcode pixelcode)
......@@ -918,8 +918,8 @@ static void resizer_calc_ratios(struct isp_res_device *res,
/*
* resizer_set_crop_params - Setup hardware with cropping parameters
* @res : resizer private structure
* @crop_rect : current crop rectangle
* @ratio : resizer ratios
* @input : format on sink pad
* @output : format on source pad
* return none
*/
static void resizer_set_crop_params(struct isp_res_device *res,
......
......@@ -333,7 +333,7 @@ isp_video_check_format(struct isp_video *video, struct isp_video_fh *vfh)
/*
* ispmmu_vmap - Wrapper for Virtual memory mapping of a scatter gather list
* @dev: Device pointer specific to the OMAP3 ISP.
* @isp: Device pointer specific to the OMAP3 ISP.
* @sglist: Pointer to source Scatter gather list to allocate.
* @sglen: Number of elements of the scatter-gatter list.
*
......@@ -363,7 +363,7 @@ ispmmu_vmap(struct isp_device *isp, const struct scatterlist *sglist, int sglen)
/*
* ispmmu_vunmap - Unmap a device address from the ISP MMU
* @dev: Device pointer specific to the OMAP3 ISP.
* @isp: Device pointer specific to the OMAP3 ISP.
* @da: Device address generated from a ispmmu_vmap call.
*/
static void ispmmu_vunmap(struct isp_device *isp, dma_addr_t da)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment