Commit 874c9cc9 authored by Chanwoo Choi's avatar Chanwoo Choi Committed by Felipe Balbi

usb: phy: qcom-8x16-usb: Replace the extcon API

This patch uses the resource-managed extcon API for extcon_register_notifier()
and replaces the deprecated extcon API as following:
- extcon_get_cable_state_() -> extcon_get_state()
Signed-off-by: default avatarChanwoo Choi <cw00.choi@samsung.com>
Acked-by: default avatarFelipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: default avatarFelipe Balbi <felipe.balbi@linux.intel.com>
parent e61bebde
...@@ -187,7 +187,7 @@ static int phy_8x16_init(struct usb_phy *phy) ...@@ -187,7 +187,7 @@ static int phy_8x16_init(struct usb_phy *phy)
val = ULPI_PWR_OTG_COMP_DISABLE; val = ULPI_PWR_OTG_COMP_DISABLE;
usb_phy_io_write(phy, val, ULPI_SET(ULPI_PWR_CLK_MNG_REG)); usb_phy_io_write(phy, val, ULPI_SET(ULPI_PWR_CLK_MNG_REG));
state = extcon_get_cable_state_(qphy->vbus_edev, EXTCON_USB); state = extcon_get_state(qphy->vbus_edev, EXTCON_USB);
if (state) if (state)
phy_8x16_vbus_on(qphy); phy_8x16_vbus_on(qphy);
else else
...@@ -316,23 +316,20 @@ static int phy_8x16_probe(struct platform_device *pdev) ...@@ -316,23 +316,20 @@ static int phy_8x16_probe(struct platform_device *pdev)
goto off_clks; goto off_clks;
qphy->vbus_notify.notifier_call = phy_8x16_vbus_notify; qphy->vbus_notify.notifier_call = phy_8x16_vbus_notify;
ret = extcon_register_notifier(qphy->vbus_edev, EXTCON_USB, ret = devm_extcon_register_notifier(&pdev->dev, qphy->vbus_edev,
&qphy->vbus_notify); EXTCON_USB, &qphy->vbus_notify);
if (ret < 0) if (ret < 0)
goto off_power; goto off_power;
ret = usb_add_phy_dev(&qphy->phy); ret = usb_add_phy_dev(&qphy->phy);
if (ret) if (ret)
goto off_extcon; goto off_power;
qphy->reboot_notify.notifier_call = phy_8x16_reboot_notify; qphy->reboot_notify.notifier_call = phy_8x16_reboot_notify;
register_reboot_notifier(&qphy->reboot_notify); register_reboot_notifier(&qphy->reboot_notify);
return 0; return 0;
off_extcon:
extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB,
&qphy->vbus_notify);
off_power: off_power:
regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator); regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator);
off_clks: off_clks:
...@@ -347,8 +344,6 @@ static int phy_8x16_remove(struct platform_device *pdev) ...@@ -347,8 +344,6 @@ static int phy_8x16_remove(struct platform_device *pdev)
struct phy_8x16 *qphy = platform_get_drvdata(pdev); struct phy_8x16 *qphy = platform_get_drvdata(pdev);
unregister_reboot_notifier(&qphy->reboot_notify); unregister_reboot_notifier(&qphy->reboot_notify);
extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB,
&qphy->vbus_notify);
/* /*
* Ensure that D+/D- lines are routed to uB connector, so * Ensure that D+/D- lines are routed to uB connector, so
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment