mtd: spi-nor: Drop inline on all internal helpers

gcc should be smart enough to decide when inlining a function makes
sense. Drop all inline specifiers.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>

drivers/mtd/spi-nor/spi-nor.c

@@ -352,7 +352,7 @@ static int read_cr(struct spi_nor *nor)
  * Write status register 1 byte
  * Returns negative if error occurred.
  */
-static inline int write_sr(struct spi_nor *nor, u8 val)
+static int write_sr(struct spi_nor *nor, u8 val)
 {
 	nor->cmd_buf[0] = val;
 	return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1);
@@ -362,7 +362,7 @@ static inline int write_sr(struct spi_nor *nor, u8 val)
  * Set write enable latch with Write Enable command.
  * Returns negative if error occurred.
  */
-static inline int write_enable(struct spi_nor *nor)
+static int write_enable(struct spi_nor *nor)
 {
 	return nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0);
 }
@@ -370,12 +370,12 @@ static inline int write_enable(struct spi_nor *nor)
 /*
  * Send write disable instruction to the chip.
  */
-static inline int write_disable(struct spi_nor *nor)
+static int write_disable(struct spi_nor *nor)
 {
 	return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0);
 }
 
-static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
+static struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
 {
 	return mtd->priv;
 }
@@ -393,7 +393,7 @@ static u8 spi_nor_convert_opcode(u8 opcode, const u8 table[][2], size_t size)
 	return opcode;
 }
 
-static inline u8 spi_nor_convert_3to4_read(u8 opcode)
+static u8 spi_nor_convert_3to4_read(u8 opcode)
 {
 	static const u8 spi_nor_3to4_read[][2] = {
 		{ SPINOR_OP_READ,	SPINOR_OP_READ_4B },
@@ -412,7 +412,7 @@ static inline u8 spi_nor_convert_3to4_read(u8 opcode)
 				      ARRAY_SIZE(spi_nor_3to4_read));
 }
 
-static inline u8 spi_nor_convert_3to4_program(u8 opcode)
+static u8 spi_nor_convert_3to4_program(u8 opcode)
 {
 	static const u8 spi_nor_3to4_program[][2] = {
 		{ SPINOR_OP_PP,		SPINOR_OP_PP_4B },
@@ -424,7 +424,7 @@ static inline u8 spi_nor_convert_3to4_program(u8 opcode)
 				      ARRAY_SIZE(spi_nor_3to4_program));
 }
 
-static inline u8 spi_nor_convert_3to4_erase(u8 opcode)
+static u8 spi_nor_convert_3to4_erase(u8 opcode)
 {
 	static const u8 spi_nor_3to4_erase[][2] = {
 		{ SPINOR_OP_BE_4K,	SPINOR_OP_BE_4K_4B },
@@ -469,8 +469,8 @@ static void spi_nor_set_4byte_opcodes(struct spi_nor *nor,
 }
 
 /* Enable/disable 4-byte addressing mode. */
-static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info,
-			    int enable)
+static int set_4byte(struct spi_nor *nor, const struct flash_info *info,
+		     int enable)
 {
 	int status;
 	bool need_wren = false;
@@ -528,7 +528,7 @@ static int s3an_sr_ready(struct spi_nor *nor)
 	return !!(val & XSR_RDY);
 }
 
-static inline int spi_nor_sr_ready(struct spi_nor *nor)
+static int spi_nor_sr_ready(struct spi_nor *nor)
 {
 	int sr = read_sr(nor);
 	if (sr < 0)
@@ -547,7 +547,7 @@ static inline int spi_nor_sr_ready(struct spi_nor *nor)
 	return !(sr & SR_WIP);
 }
 
-static inline int spi_nor_fsr_ready(struct spi_nor *nor)
+static int spi_nor_fsr_ready(struct spi_nor *nor)
 {
 	int fsr = read_fsr(nor);
 	if (fsr < 0)
@@ -2420,7 +2420,7 @@ static int spi_nor_read_sfdp_dma_unsafe(struct spi_nor *nor, u32 addr,
 
 /* Fast Read settings. */
 
-static inline void
+static void
 spi_nor_set_read_settings_from_bfpt(struct spi_nor_read_command *read,
 				    u16 half,
 				    enum spi_nor_protocol proto)