mach-ux500: Add SDI support for snowball board

With SDI support for the Snowball we can boot from the
SD card.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>

arch/arm/mach-ux500/board-mop500-sdi.c

@@ -216,15 +216,24 @@ void __init mop500_sdi_init(void)
 	/* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */
 	if (!cpu_is_u8500v10())
 		mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
-	db8500_add_sdi2(&mop500_sdi2_data, periphid);
+	/* sdi2 on snowball is in ATL_B mode for FSMC (LAN) */
+	if (!machine_is_snowball())
+		db8500_add_sdi2(&mop500_sdi2_data, periphid);
 
 	/* On-board eMMC */
 	db8500_add_sdi4(&mop500_sdi4_data, periphid);
 
-	if (machine_is_hrefv60()) {
-		mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
-		sdi0_en = HREFV60_SDMMC_EN_GPIO;
-		sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
+	if (machine_is_hrefv60() || machine_is_snowball()) {
+		if (machine_is_hrefv60()) {
+			mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
+			sdi0_en = HREFV60_SDMMC_EN_GPIO;
+			sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
+		} else if (machine_is_snowball()) {
+			mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
+			mop500_sdi0_data.cd_invert = true;
+			sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
+			sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
+		}
 		sdi0_configure();
 	}
 

arch/arm/mach-ux500/board-mop500.c

@@ -573,8 +573,7 @@ static void __init mop500_init_machine(void)
 					ARRAY_SIZE(mop500_platform_devs));
 
 	mop500_i2c_init();
-	if (!machine_is_snowball())
-		mop500_sdi_init();
+	mop500_sdi_init();
 	mop500_spi_init();
 	mop500_uart_init();
 

arch/arm/mach-ux500/board-mop500.h

@@ -7,6 +7,11 @@
 #ifndef __BOARD_MOP500_H
 #define __BOARD_MOP500_H
 
+/* snowball GPIO for MMC card */
+#define SNOWBALL_SDMMC_EN_GPIO 217
+#define SNOWBALL_SDMMC_1V8_3V_GPIO 228
+#define SNOWBALL_SDMMC_CD_GPIO 218
+
 /* HREFv60-specific GPIO assignments, this board has no GPIO expander */
 #define HREFV60_TOUCH_RST_GPIO		143
 #define HREFV60_PROX_SENSE_GPIO		217