Commit 885d6626 authored by Hans de Goede's avatar Hans de Goede Committed by Linus Walleij

pinctrl-sunxi: Fix sun5i-a13 port F multiplexing

The correct value for selecting the mmc0 function on port F pins is 2 not 4,
as per the data-sheet:
http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdfSigned-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Acked-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent e3653749
......@@ -1932,27 +1932,27 @@ static const struct sunxi_desc_pin sun5i_a13_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF0,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x4, "mmc0")), /* D1 */
SUNXI_FUNCTION(0x2, "mmc0")), /* D1 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF1,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x4, "mmc0")), /* D0 */
SUNXI_FUNCTION(0x2, "mmc0")), /* D0 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF2,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x4, "mmc0")), /* CLK */
SUNXI_FUNCTION(0x2, "mmc0")), /* CLK */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF3,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x4, "mmc0")), /* CMD */
SUNXI_FUNCTION(0x2, "mmc0")), /* CMD */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF4,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x4, "mmc0")), /* D3 */
SUNXI_FUNCTION(0x2, "mmc0")), /* D3 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF5,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x4, "mmc0")), /* D2 */
SUNXI_FUNCTION(0x2, "mmc0")), /* D2 */
/* Hole */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PG0,
SUNXI_FUNCTION(0x0, "gpio_in"),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment