Merge tag 'fixes-for-v4.11-rc2' of...

Merge tag 'fixes-for-v4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v4.11-rc2

dwc3 got a few fixes this time around:

Fixed an old bug where a broken endpoint descriptor passed in via
userspace through f_fs could prevent dwc3 from working because when
calculating max bursts, we could overwrite top 16 bits of a register.

Also fixed a bug on dwc3's ep_dequeue implementation which wasn't
properly incrementing our TRB dequeue pointer.

dwc3 on omap got two fixes: one for system suspend/resume and another
added a missing break statement on dwc3_omap_set_mailbox().

Apart from these, we have a set of smaller fixes including memory leak
in configfs, build warning fix in atmel udc and a revert of a broken
patch that went in during the merge window

drivers/usb/dwc3/dwc3-omap.c

@@ -250,6 +250,7 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
 		val = dwc3_omap_read_utmi_ctrl(omap);
 		val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG;
 		dwc3_omap_write_utmi_ctrl(omap, val);
+		break;
 
 	case OMAP_DWC3_VBUS_OFF:
 		val = dwc3_omap_read_utmi_ctrl(omap);
@@ -392,7 +393,7 @@ static void dwc3_omap_set_utmi_mode(struct dwc3_omap *omap)
 {
 	u32			reg;
 	struct device_node	*node = omap->dev->of_node;
-	int			utmi_mode = 0;
+	u32			utmi_mode = 0;
 
 	reg = dwc3_omap_read_utmi_ctrl(omap);
 

drivers/usb/dwc3/gadget.c

@@ -1342,6 +1342,68 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
 		if (r == req) {
 			/* wait until it is processed */
 			dwc3_stop_active_transfer(dwc, dep->number, true);
+
+			/*
+			 * If request was already started, this means we had to
+			 * stop the transfer. With that we also need to ignore
+			 * all TRBs used by the request, however TRBs can only
+			 * be modified after completion of END_TRANSFER
+			 * command. So what we do here is that we wait for
+			 * END_TRANSFER completion and only after that, we jump
+			 * over TRBs by clearing HWO and incrementing dequeue
+			 * pointer.
+			 *
+			 * Note that we have 2 possible types of transfers here:
+			 *
+			 * i) Linear buffer request
+			 * ii) SG-list based request
+			 *
+			 * SG-list based requests will have r->num_pending_sgs
+			 * set to a valid number (> 0). Linear requests,
+			 * normally use a single TRB.
+			 *
+			 * For each of these two cases, if r->unaligned flag is
+			 * set, one extra TRB has been used to align transfer
+			 * size to wMaxPacketSize.
+			 *
+			 * All of these cases need to be taken into
+			 * consideration so we don't mess up our TRB ring
+			 * pointers.
+			 */
+			wait_event_lock_irq(dep->wait_end_transfer,
+					!(dep->flags & DWC3_EP_END_TRANSFER_PENDING),
+					dwc->lock);
+
+			if (!r->trb)
+				goto out1;
+
+			if (r->num_pending_sgs) {
+				struct dwc3_trb *trb;
+				int i = 0;
+
+				for (i = 0; i < r->num_pending_sgs; i++) {
+					trb = r->trb + i;
+					trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+					dwc3_ep_inc_deq(dep);
+				}
+
+				if (r->unaligned) {
+					trb = r->trb + r->num_pending_sgs + 1;
+					trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+					dwc3_ep_inc_deq(dep);
+				}
+			} else {
+				struct dwc3_trb *trb = r->trb;
+
+				trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+				dwc3_ep_inc_deq(dep);
+
+				if (r->unaligned) {
+					trb = r->trb + 1;
+					trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+					dwc3_ep_inc_deq(dep);
+				}
+			}
 			goto out1;
 		}
 		dev_err(dwc->dev, "request %p was not queued to %s\n",
@@ -1352,6 +1414,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
 
 out1:
 	/* giveback the request */
+	dep->queued_requests--;
 	dwc3_gadget_giveback(dep, req, -ECONNRESET);
 
 out0:
@@ -2126,12 +2189,12 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
 		return 1;
 	}
 
-	if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
-		return 1;
-
 	count = trb->size & DWC3_TRB_SIZE_MASK;
 	req->remaining += count;
 
+	if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
+		return 1;
+
 	if (dep->direction) {
 		if (count) {
 			trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size);
@@ -3228,15 +3291,10 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
 
 int dwc3_gadget_suspend(struct dwc3 *dwc)
 {
-	int ret;
-
 	if (!dwc->gadget_driver)
 		return 0;
 
-	ret = dwc3_gadget_run_stop(dwc, false, false);
-	if (ret < 0)
-		return ret;
-
+	dwc3_gadget_run_stop(dwc, false, false);
 	dwc3_disconnect_gadget(dwc);
 	__dwc3_gadget_stop(dwc);
 

drivers/usb/dwc3/gadget.h

@@ -28,23 +28,23 @@ struct dwc3;
 #define gadget_to_dwc(g)	(container_of(g, struct dwc3, gadget))
 
 /* DEPCFG parameter 1 */
-#define DWC3_DEPCFG_INT_NUM(n)		((n) << 0)
+#define DWC3_DEPCFG_INT_NUM(n)		(((n) & 0x1f) << 0)
 #define DWC3_DEPCFG_XFER_COMPLETE_EN	(1 << 8)
 #define DWC3_DEPCFG_XFER_IN_PROGRESS_EN	(1 << 9)
 #define DWC3_DEPCFG_XFER_NOT_READY_EN	(1 << 10)
 #define DWC3_DEPCFG_FIFO_ERROR_EN	(1 << 11)
 #define DWC3_DEPCFG_STREAM_EVENT_EN	(1 << 13)
-#define DWC3_DEPCFG_BINTERVAL_M1(n)	((n) << 16)
+#define DWC3_DEPCFG_BINTERVAL_M1(n)	(((n) & 0xff) << 16)
 #define DWC3_DEPCFG_STREAM_CAPABLE	(1 << 24)
-#define DWC3_DEPCFG_EP_NUMBER(n)	((n) << 25)
+#define DWC3_DEPCFG_EP_NUMBER(n)	(((n) & 0x1f) << 25)
 #define DWC3_DEPCFG_BULK_BASED		(1 << 30)
 #define DWC3_DEPCFG_FIFO_BASED		(1 << 31)
 
 /* DEPCFG parameter 0 */
-#define DWC3_DEPCFG_EP_TYPE(n)		((n) << 1)
-#define DWC3_DEPCFG_MAX_PACKET_SIZE(n)	((n) << 3)
-#define DWC3_DEPCFG_FIFO_NUMBER(n)	((n) << 17)
-#define DWC3_DEPCFG_BURST_SIZE(n)	((n) << 22)
+#define DWC3_DEPCFG_EP_TYPE(n)		(((n) & 0x3) << 1)
+#define DWC3_DEPCFG_MAX_PACKET_SIZE(n)	(((n) & 0x7ff) << 3)
+#define DWC3_DEPCFG_FIFO_NUMBER(n)	(((n) & 0x1f) << 17)
+#define DWC3_DEPCFG_BURST_SIZE(n)	(((n) & 0xf) << 22)
 #define DWC3_DEPCFG_DATA_SEQ_NUM(n)	((n) << 26)
 /* This applies for core versions earlier than 1.94a */
 #define DWC3_DEPCFG_IGN_SEQ_NUM		(1 << 31)

drivers/usb/gadget/configfs.c

@@ -269,6 +269,7 @@ static ssize_t gadget_dev_desc_UDC_store(struct config_item *item,
 		ret = unregister_gadget(gi);
 		if (ret)
 			goto err;
+		kfree(name);
 	} else {
 		if (gi->composite.gadget_driver.udc_name) {
 			ret = -EBUSY;

drivers/usb/gadget/function/f_fs.c

@@ -1834,11 +1834,14 @@ static int ffs_func_eps_enable(struct ffs_function *func)
 	spin_lock_irqsave(&func->ffs->eps_lock, flags);
 	while(count--) {
 		struct usb_endpoint_descriptor *ds;
+		struct usb_ss_ep_comp_descriptor *comp_desc = NULL;
+		int needs_comp_desc = false;
 		int desc_idx;
 
-		if (ffs->gadget->speed == USB_SPEED_SUPER)
+		if (ffs->gadget->speed == USB_SPEED_SUPER) {
 			desc_idx = 2;
-		else if (ffs->gadget->speed == USB_SPEED_HIGH)
+			needs_comp_desc = true;
+		} else if (ffs->gadget->speed == USB_SPEED_HIGH)
 			desc_idx = 1;
 		else
 			desc_idx = 0;
@@ -1855,6 +1858,14 @@ static int ffs_func_eps_enable(struct ffs_function *func)
 
 		ep->ep->driver_data = ep;
 		ep->ep->desc = ds;
+
+		comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds +
+				USB_DT_ENDPOINT_SIZE);
+		ep->ep->maxburst = comp_desc->bMaxBurst + 1;
+
+		if (needs_comp_desc)
+			ep->ep->comp_desc = comp_desc;
+
 		ret = usb_ep_enable(ep->ep);
 		if (likely(!ret)) {
 			epfile->ep = ep;
@@ -2253,7 +2264,7 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type,
 
 		if (len < sizeof(*d) ||
 		    d->bFirstInterfaceNumber >= ffs->interfaces_count ||
-		    d->Reserved1)
+		    !d->Reserved1)
 			return -EINVAL;
 		for (i = 0; i < ARRAY_SIZE(d->Reserved2); ++i)
 			if (d->Reserved2[i])

drivers/usb/gadget/function/f_uvc.c

@@ -258,13 +258,6 @@ uvc_function_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
 	memcpy(&uvc_event->req, ctrl, sizeof(uvc_event->req));
 	v4l2_event_queue(&uvc->vdev, &v4l2_event);
 
-	/* Pass additional setup data to userspace */
-	if (uvc->event_setup_out && uvc->event_length) {
-		uvc->control_req->length = uvc->event_length;
-		return usb_ep_queue(uvc->func.config->cdev->gadget->ep0,
-			uvc->control_req, GFP_ATOMIC);
-	}
-
 	return 0;
 }
 

drivers/usb/gadget/legacy/inode.c

@@ -1782,8 +1782,10 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 
 	spin_lock_irq (&dev->lock);
 	value = -EINVAL;
-	if (dev->buf)
+	if (dev->buf) {
+		kfree(kbuf);
 		goto fail;
+	}
 	dev->buf = kbuf;
 
 	/* full or low speed config */

drivers/usb/gadget/udc/atmel_usba_udc.c

@@ -610,7 +610,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 {
 	struct usba_ep *ep = to_usba_ep(_ep);
 	struct usba_udc *udc = ep->udc;
-	unsigned long flags, ept_cfg, maxpacket;
+	unsigned long flags, maxpacket;
 	unsigned int nr_trans;
 
 	DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc);
@@ -630,7 +630,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	ep->is_in = 0;
 
 	DBG(DBG_ERR, "%s: EPT_CFG = 0x%lx (maxpacket = %lu)\n",
-			ep->ep.name, ept_cfg, maxpacket);
+			ep->ep.name, ep->ept_cfg, maxpacket);
 
 	if (usb_endpoint_dir_in(desc)) {
 		ep->is_in = 1;

drivers/usb/gadget/udc/dummy_hcd.c

@@ -1031,6 +1031,8 @@ static int dummy_udc_probe(struct platform_device *pdev)
 	int		rc;
 
 	dum = *((void **)dev_get_platdata(&pdev->dev));
+	/* Clear usb_gadget region for new registration to udc-core */
+	memzero_explicit(&dum->gadget, sizeof(struct usb_gadget));
 	dum->gadget.name = gadget_name;
 	dum->gadget.ops = &dummy_ops;
 	dum->gadget.max_speed = USB_SPEED_SUPER;

drivers/usb/gadget/udc/net2280.c

@@ -1146,15 +1146,15 @@ static int scan_dma_completions(struct net2280_ep *ep)
 	 */
 	while (!list_empty(&ep->queue)) {
 		struct net2280_request	*req;
-		u32			tmp;
+		u32 req_dma_count;
 
 		req = list_entry(ep->queue.next,
 				struct net2280_request, queue);
 		if (!req->valid)
 			break;
 		rmb();
-		tmp = le32_to_cpup(&req->td->dmacount);
-		if ((tmp & BIT(VALID_BIT)) != 0)
+		req_dma_count = le32_to_cpup(&req->td->dmacount);
+		if ((req_dma_count & BIT(VALID_BIT)) != 0)
 			break;
 
 		/* SHORT_PACKET_TRANSFERRED_INTERRUPT handles "usb-short"
@@ -1163,40 +1163,41 @@ static int scan_dma_completions(struct net2280_ep *ep)
 		 */
 		if (unlikely(req->td->dmadesc == 0)) {
 			/* paranoia */
-			tmp = readl(&ep->dma->dmacount);
-			if (tmp & DMA_BYTE_COUNT_MASK)
+			u32 const ep_dmacount = readl(&ep->dma->dmacount);
+
+			if (ep_dmacount & DMA_BYTE_COUNT_MASK)
 				break;
 			/* single transfer mode */
-			dma_done(ep, req, tmp, 0);
+			dma_done(ep, req, req_dma_count, 0);
 			num_completed++;
 			break;
 		} else if (!ep->is_in &&
 			   (req->req.length % ep->ep.maxpacket) &&
 			   !(ep->dev->quirks & PLX_PCIE)) {
 
-			tmp = readl(&ep->regs->ep_stat);
+			u32 const ep_stat = readl(&ep->regs->ep_stat);
 			/* AVOID TROUBLE HERE by not issuing short reads from
 			 * your gadget driver.  That helps avoids errata 0121,
 			 * 0122, and 0124; not all cases trigger the warning.
 			 */
-			if ((tmp & BIT(NAK_OUT_PACKETS)) == 0) {
+			if ((ep_stat & BIT(NAK_OUT_PACKETS)) == 0) {
 				ep_warn(ep->dev, "%s lost packet sync!\n",
 						ep->ep.name);
 				req->req.status = -EOVERFLOW;
 			} else {
-				tmp = readl(&ep->regs->ep_avail);
-				if (tmp) {
+				u32 const ep_avail = readl(&ep->regs->ep_avail);
+				if (ep_avail) {
 					/* fifo gets flushed later */
 					ep->out_overflow = 1;
 					ep_dbg(ep->dev,
 						"%s dma, discard %d len %d\n",
-						ep->ep.name, tmp,
+						ep->ep.name, ep_avail,
 						req->req.length);
 					req->req.status = -EOVERFLOW;
 				}
 			}
 		}
-		dma_done(ep, req, tmp, 0);
+		dma_done(ep, req, req_dma_count, 0);
 		num_completed++;
 	}
 

drivers/usb/gadget/udc/pxa27x_udc.c

@@ -2534,9 +2534,10 @@ static int pxa_udc_remove(struct platform_device *_dev)
 	usb_del_gadget_udc(&udc->gadget);
 	pxa_cleanup_debugfs(udc);
 
-	if (!IS_ERR_OR_NULL(udc->transceiver))
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
 		usb_unregister_notifier(udc->transceiver, &pxa27x_udc_phy);
-	usb_put_phy(udc->transceiver);
+		usb_put_phy(udc->transceiver);
+	}
 
 	udc->transceiver = NULL;
 	the_controller = NULL;