[media] cx231xx: make output mode configurable via the board profile

Extend the board profile structure to allow configuration of the output mode.
Right now they are all doing VIP 1.1 format, but we have a board that needs
ITU656 format (which hasn't been checked in yet).
Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/cx231xx/cx231xx-avcore.c

@@ -656,12 +656,12 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
 		value |= (1 << 7);
 		status = vid_blk_write_word(dev, OUT_CTRL1, value);
 
-		/* Set vip 1.1 output mode */
+		/* Set output mode */
 		status = cx231xx_read_modify_write_i2c_dword(dev,
 							VID_BLK_I2C_ADDRESS,
 							OUT_CTRL1,
 							FLD_OUT_MODE,
-							OUT_MODE_VIP11);
+							dev->board.output_mode);
 
 		/* Tell DIF object to go to baseband mode  */
 		status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
@@ -779,11 +779,11 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
 			value |= (1 << 7);
 			status = vid_blk_write_word(dev, OUT_CTRL1, value);
 
-			/* Set vip 1.1 output mode */
+			/* Set output mode */
 			status = cx231xx_read_modify_write_i2c_dword(dev,
 							VID_BLK_I2C_ADDRESS,
 							OUT_CTRL1, FLD_OUT_MODE,
-							OUT_MODE_VIP11);
+							dev->board.output_mode);
 
 			/* Tell DIF object to go to baseband mode */
 			status = cx231xx_dif_set_standard(dev,
@@ -870,11 +870,11 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
 				 (FLD_OEF_AGC_IF);
 			status = vid_blk_write_word(dev, PIN_CTRL, value);
 
-			/* Set vip 1.1 output mode */
+			/* Set output mode */
 			status = cx231xx_read_modify_write_i2c_dword(dev,
 						VID_BLK_I2C_ADDRESS,
 						OUT_CTRL1, FLD_OUT_MODE,
-						OUT_MODE_VIP11);
+						dev->board.output_mode);
 
 			/* Disable auto config of registers */
 			status = cx231xx_read_modify_write_i2c_dword(dev,

drivers/media/video/cx231xx/cx231xx-cards.c

@@ -99,6 +99,7 @@ struct cx231xx_board cx231xx_boards[] = {
 		.tuner_scl_gpio = 0x1a,
 		.tuner_sda_gpio = 0x1b,
 		.decoder = CX231XX_AVDECODER,
+		.output_mode = OUT_MODE_VIP11,
 		.demod_xfer_mode = 0,
 		.ctl_pin_status_mask = 0xFFFFFFC4,
 		.agc_analog_digital_select_gpio = 0x0c,
@@ -138,6 +139,7 @@ struct cx231xx_board cx231xx_boards[] = {
 		.tuner_scl_gpio = 0x1a,
 		.tuner_sda_gpio = 0x1b,
 		.decoder = CX231XX_AVDECODER,
+		.output_mode = OUT_MODE_VIP11,
 		.demod_xfer_mode = 0,
 		.ctl_pin_status_mask = 0xFFFFFFC4,
 		.agc_analog_digital_select_gpio = 0x0c,
@@ -177,6 +179,7 @@ struct cx231xx_board cx231xx_boards[] = {
 		.tuner_scl_gpio = 0x1a,
 		.tuner_sda_gpio = 0x1b,
 		.decoder = CX231XX_AVDECODER,
+		.output_mode = OUT_MODE_VIP11,
 		.demod_xfer_mode = 0,
 		.ctl_pin_status_mask = 0xFFFFFFC4,
 		.agc_analog_digital_select_gpio = 0x1c,
@@ -217,6 +220,7 @@ struct cx231xx_board cx231xx_boards[] = {
 		.tuner_scl_gpio = 0x1a,
 		.tuner_sda_gpio = 0x1b,
 		.decoder = CX231XX_AVDECODER,
+		.output_mode = OUT_MODE_VIP11,
 		.demod_xfer_mode = 0,
 		.ctl_pin_status_mask = 0xFFFFFFC4,
 		.agc_analog_digital_select_gpio = 0x1c,
@@ -256,6 +260,7 @@ struct cx231xx_board cx231xx_boards[] = {
 		.tuner_scl_gpio = 0x1a,
 		.tuner_sda_gpio = 0x1b,
 		.decoder = CX231XX_AVDECODER,
+		.output_mode = OUT_MODE_VIP11,
 		.demod_xfer_mode = 0,
 		.ctl_pin_status_mask = 0xFFFFFFC4,
 		.agc_analog_digital_select_gpio = 0x1c,
@@ -295,6 +300,7 @@ struct cx231xx_board cx231xx_boards[] = {
 		.tuner_scl_gpio = 0x1a,
 		.tuner_sda_gpio = 0x1b,
 		.decoder = CX231XX_AVDECODER,
+		.output_mode = OUT_MODE_VIP11,
 		.demod_xfer_mode = 0,
 		.ctl_pin_status_mask = 0xFFFFFFC4,
 		.agc_analog_digital_select_gpio = 0x0c,
@@ -322,6 +328,7 @@ struct cx231xx_board cx231xx_boards[] = {
 		.tuner_scl_gpio = 0x1a,
 		.tuner_sda_gpio = 0x1b,
 		.decoder = CX231XX_AVDECODER,
+		.output_mode = OUT_MODE_VIP11,
 		.demod_xfer_mode = 0,
 		.ctl_pin_status_mask = 0xFFFFFFC4,
 		.agc_analog_digital_select_gpio = 0x0c,
@@ -349,6 +356,7 @@ struct cx231xx_board cx231xx_boards[] = {
 		.tuner_scl_gpio = 0x1a,
 		.tuner_sda_gpio = 0x1b,
 		.decoder = CX231XX_AVDECODER,
+		.output_mode = OUT_MODE_VIP11,
 		.demod_xfer_mode = 0,
 		.ctl_pin_status_mask = 0xFFFFFFC4,
 		.agc_analog_digital_select_gpio = 0x0c,
@@ -382,6 +390,7 @@ struct cx231xx_board cx231xx_boards[] = {
 		.name = "Hauppauge USB Live 2",
 		.tuner_type = TUNER_ABSENT,
 		.decoder = CX231XX_AVDECODER,
+		.output_mode = OUT_MODE_VIP11,
 		.demod_xfer_mode = 0,
 		.ctl_pin_status_mask = 0xFFFFFFC4,
 		.agc_analog_digital_select_gpio = 0x0c,

drivers/media/video/cx231xx/cx231xx.h

@@ -353,6 +353,7 @@ struct cx231xx_board {
 	unsigned char xclk, i2c_speed;
 
 	enum cx231xx_decoder decoder;
+	int output_mode;
 
 	struct cx231xx_input input[MAX_CX231XX_INPUT];
 	struct cx231xx_input radio;