Commit 894ca30c authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'powerpc-4.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 4.11:

  Headed to stable:

   - disable HFSCR[TM] if TM is not supported, fixes a potential host
     kernel crash triggered by a hostile guest, but only in
     configurations that no one uses

   - don't try to fix up misaligned load-with-reservation instructions

   - fix flush_(d|i)cache_range() called from modules on little endian
     kernels

   - add missing global TLB invalidate if cxl is active

   - fix missing preempt_disable() in crc32c-vpmsum

  And a fix for selftests build changes that went in this release:

   - selftests/powerpc: Fix standalone powerpc build

  Thanks to: Benjamin Herrenschmidt, Frederic Barrat, Oliver O'Halloran,
  Paul Mackerras"

* tag 'powerpc-4.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/crypto/crc32c-vpmsum: Fix missing preempt_disable()
  powerpc/mm: Add missing global TLB invalidate if cxl is active
  powerpc/64: Fix flush_(d|i)cache_range() called from modules
  powerpc: Don't try to fix up misaligned load-with-reservation instructions
  powerpc: Disable HFSCR[TM] if TM is not supported
  selftests/powerpc: Fix standalone powerpc build
parents cf01fb99 4749228f
......@@ -33,10 +33,13 @@ static u32 crc32c_vpmsum(u32 crc, unsigned char const *p, size_t len)
}
if (len & ~VMX_ALIGN_MASK) {
preempt_disable();
pagefault_disable();
enable_kernel_altivec();
crc = __crc32c_vpmsum(crc, p, len & ~VMX_ALIGN_MASK);
disable_kernel_altivec();
pagefault_enable();
preempt_enable();
}
tail = len & VMX_ALIGN_MASK;
......
......@@ -807,14 +807,25 @@ int fix_alignment(struct pt_regs *regs)
nb = aligninfo[instr].len;
flags = aligninfo[instr].flags;
/* ldbrx/stdbrx overlap lfs/stfs in the DSISR unfortunately */
if (IS_XFORM(instruction) && ((instruction >> 1) & 0x3ff) == 532) {
nb = 8;
flags = LD+SW;
} else if (IS_XFORM(instruction) &&
((instruction >> 1) & 0x3ff) == 660) {
nb = 8;
flags = ST+SW;
/*
* Handle some cases which give overlaps in the DSISR values.
*/
if (IS_XFORM(instruction)) {
switch (get_xop(instruction)) {
case 532: /* ldbrx */
nb = 8;
flags = LD+SW;
break;
case 660: /* stdbrx */
nb = 8;
flags = ST+SW;
break;
case 20: /* lwarx */
case 84: /* ldarx */
case 116: /* lharx */
case 276: /* lqarx */
return 0; /* not emulated ever */
}
}
/* Byteswap little endian loads and stores */
......
......@@ -67,7 +67,7 @@ PPC64_CACHES:
* flush all bytes from start through stop-1 inclusive
*/
_GLOBAL(flush_icache_range)
_GLOBAL_TOC(flush_icache_range)
BEGIN_FTR_SECTION
PURGE_PREFETCHED_INS
blr
......@@ -120,7 +120,7 @@ EXPORT_SYMBOL(flush_icache_range)
*
* flush all bytes from start to stop-1 inclusive
*/
_GLOBAL(flush_dcache_range)
_GLOBAL_TOC(flush_dcache_range)
/*
* Flush the data cache to memory
......
......@@ -236,6 +236,15 @@ static void cpu_ready_for_interrupts(void)
mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3);
}
/*
* Fixup HFSCR:TM based on CPU features. The bit is set by our
* early asm init because at that point we haven't updated our
* CPU features from firmware and device-tree. Here we have,
* so let's do it.
*/
if (cpu_has_feature(CPU_FTR_HVMODE) && !cpu_has_feature(CPU_FTR_TM_COMP))
mtspr(SPRN_HFSCR, mfspr(SPRN_HFSCR) & ~HFSCR_TM);
/* Set IR and DR in PACA MSR */
get_paca()->kernel_msr = MSR_KERNEL;
}
......
......@@ -638,6 +638,10 @@ static void native_flush_hash_range(unsigned long number, int local)
unsigned long psize = batch->psize;
int ssize = batch->ssize;
int i;
unsigned int use_local;
use_local = local && mmu_has_feature(MMU_FTR_TLBIEL) &&
mmu_psize_defs[psize].tlbiel && !cxl_ctx_in_use();
local_irq_save(flags);
......@@ -667,8 +671,7 @@ static void native_flush_hash_range(unsigned long number, int local)
} pte_iterate_hashed_end();
}
if (mmu_has_feature(MMU_FTR_TLBIEL) &&
mmu_psize_defs[psize].tlbiel && local) {
if (use_local) {
asm volatile("ptesync":::"memory");
for (i = 0; i < number; i++) {
vpn = batch->vpn[i];
......
......@@ -34,34 +34,34 @@ endif
all: $(SUB_DIRS)
$(SUB_DIRS):
BUILD_TARGET=$$OUTPUT/$@; mkdir -p $$BUILD_TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -k -C $@ all
BUILD_TARGET=$(OUTPUT)/$@; mkdir -p $$BUILD_TARGET; $(MAKE) OUTPUT=$$BUILD_TARGET -k -C $@ all
include ../lib.mk
override define RUN_TESTS
@for TARGET in $(SUB_DIRS); do \
BUILD_TARGET=$$OUTPUT/$$TARGET; \
BUILD_TARGET=$(OUTPUT)/$$TARGET; \
$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests;\
done;
endef
override define INSTALL_RULE
@for TARGET in $(SUB_DIRS); do \
BUILD_TARGET=$$OUTPUT/$$TARGET; \
BUILD_TARGET=$(OUTPUT)/$$TARGET; \
$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET install;\
done;
endef
override define EMIT_TESTS
@for TARGET in $(SUB_DIRS); do \
BUILD_TARGET=$$OUTPUT/$$TARGET; \
BUILD_TARGET=$(OUTPUT)/$$TARGET; \
$(MAKE) OUTPUT=$$BUILD_TARGET -s -C $$TARGET emit_tests;\
done;
endef
clean:
@for TARGET in $(SUB_DIRS); do \
BUILD_TARGET=$$OUTPUT/$$TARGET; \
BUILD_TARGET=$(OUTPUT)/$$TARGET; \
$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean; \
done;
rm -f tags
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment